molding line used for sale

Afag Control Unit IRG 1-S Manufacturer: Afag Type: IRG 1-S Technical Data: Degree of protection: IP54 Input voltage: 230 V Output voltage: 20–228 V (adjustable) Frequency: 50/60 Hz Rated current: 6 A Degree of protection: IP54 Function: Power and frequency controller for Afag vibratory conveyors > linear oscillator or spiral conveyor Auction-ID: A7-50729-16

Sorting and feeding system Sortimat Manufacturer: Sortimat Technology GmbH & Co. Year of construction: 09/2010 Condition: used, functionally stored, technically complete, clear signs of wear System consisting of: 1. Large sorting/spiral conveyor pot (stainless steel) Diameter approx. 40 cm Multi-stage spiral conveyor Pneumatic separation units installed Sensors and air nozzles available Oscillating drive Sortimat / RNA design Acoustic insulation inside complete 3. Small parts sorting pot (third pot) Diameter approx. 14–16 cm Fine parts processing (e.g. pins, clips, contact parts) Precisely adjustable bunker feed and sensors 4. Linear sections / transfer units Several linear conveyors with stainless steel guides 5. Stainless steel bunker / parts storage Large stainless steel filling trough (\"bunker\") Dimensions approx. 30 × 20 cm 6. Control units Sortimat control units type SMS  ...

Used DC GF 3-in-1 filling line, sparking water 6000 BPH, Year 2013Technical Specifications & Performance DataThis used bottling line is configured for PET bottle production and beverage filling, combining a linear blow molding machine, high-pressure compressed-air equipment, an integrated rinsing, filling and capping monoblock, labeling, coding, saturation and shrink-wrapping equipment. The line is designed for industrial packaging of carbonated, oxygenated and non-carbonated beverages.Blow molding capacity: 1,000–2,000 bphFilling monoblock capacity: 4,000–6,000 bph at 0.33LSupported bottle formats: 0.33L, 0.5L and 1.5LContainer material: PET bottles with PCO neck finishComplete line footprint: approximately 11 m × 6 mBlow molder configuration: linear, 2 cavities, 20–50 g preformsFilling monoblock: 18 rinsing stations, 18 filling valves and 6 capping headsAdvanced Automation & Con ...

Used automatic beer filling line 1400 BPH on 330ml - Year 2016Technical Specifications & Performance DataThis used bottling line is an automatic beer bottling solution manufactured in 2016 for the processing of 0.33L bottles. The line is designed for a production capacity of 1200–1400 bph and combines rinsing, isobaric filling, crown capping, labeling, coding and bottle conveying in a compact industrial packaging configuration.Production capacity: 1200–1400 bphBottle format: 0.33LProduct application: BeerYear of manufacture: 2016Filling monoblock: ISO 9-9-1CStated installed power: 5.5 kW across the labeling machine, filling monoblock and tables/conveyorsAdvanced Automation & Control SystemsThe automatic ISO 9-9-1C triblock integrates a rinsing turret, an isobaric filling turret and a capping turret in one synchronized bottling machine. The rinsing section uses 9 grippers with a singl ...

Maximum speed: approx. 2.00 m/s Installation dimensions: approx. 19,000 × 1,500 mm Quantity: 3 pieces Price per piece

Used BORELLI T12 TECNA line - Year 2023Technical Specifications & Performance DataThe Borelli TECNA Line T12 is a glass bottle rinsing monoblock designed for sterile-water rinsing before filling in an automatic bottling process. This used bottling line component is fitted with a 12-pincer and 12-nozzle rinsing turret, providing a simple rinse treatment with discharged rinse water.Manufacturer: BorelliModel: TECNA Line T12Year of production: 2023Maximum speed: 3000 bph Rinsing system: 12 pincers/nozzlesCompatible containers: Glass bottlesCompatible formats: 0.5L, 0.75L (2.000 bph) and 1.5L (1.500 bph) bottle formatsDimensions: 1600 mm width, 1420 mm length and 2200 mm maximum heightWeight: approximately 1800 kgThe machine is suitable for 0.75L Burgundy bottles with an 81.5 mm diameter and 299.5 mm height, as well as 0.75L Bordeaux bottles with a 74 mm diameter and heights from 308 mm to 3 ...

Complete line for twist off caps manufacturing. Air compressor included. Press, scissors, oven, PVC stabilizer, front and side vew cap forming machines

Cefla MITO 2P Finishing Line Complete industrial finishing line for automated surface coating and finishing operations. Manufacturer: Cefla Model: MITO 2P Year: 2017 Serial number: 317071 / 0 Total installed power: 15.6 kW Electrical supply: 400 V, 50 Hz, three-phase + neutral/PE Rated current: 17.8 A Largest load: 7.5 kW / 15.6 A Configuration: Enclosed finishing cabin, wide-belt conveyor, extraction/ventilation ducting, control cabinets and touchscreen/HMI-controlled processing stations Certification: CE marked Condition: Used Approximate dimensions: 12,000 × 5,500 × 4,000 mm Approximate weight: 6 t All descriptions are indicative only. Auction-ID: A1-50546-37

CONTROLS   conventional FEEDSTOCK STEEL STRIP   sheet thickness max.: 3 mm PRODUCT (PROFILE, TUBE)   external diameter max.: 139 mm ROLL FORMING LINE P110K I am providing the list of profiles and tubes that we used to manufacture on the TEGALNIK P110K line! Open cold-rolled steel profiles made from cold-rolled (CR) and hot-rolled (HR) strip: Steel angle profiles (Equal angles): • 15 x 15 x 1.5 mm • 20 x 20 x 1.5 mm • 20 x 20 x 2 mm • 25 x 25 x 3 mm • 30 x 30 x 3 mm Steel U channels: (Width x Height x Thickness) • 10 x 15 x 1.5 mm • 15 x 15 x 1.5 mm • 18 x 20 x 1.5 mm • 20 x 20 x 1.5 mm • 25 x 20 x 2 mm • 25 x 25 x 2 mm • 30 x 20 x 2 mm After modifying the machine, we also manufactured welded stainless steel tubes in the following dimensions using a special process: Round stainless steel tubes: • ø 16 x 1.5 mm • ø 18 x 1.5 mm • ø 20 x 1.5 mm • ø ...

Aumann LWS/K 6-160 linear winding machine / production system for niQ stators, year of manufacture 2016. Two identical machines are available. Technical data: compressed air connection 5 bar, mains fuse 32 A, rated current 7.2 A, operating voltage 3 x 400 V / N / PE, 50 Hz, control voltage 24 V DC, connected load 5 kVA. Dimensions approx. 1,950 x 1,970 x 2,150 mm (L x W x H). The machines are offered including documentation. An on-site inspection is possible by appointment.

A complete can filling and packaging line with can feeding, lid feeding, filling, sealing, capping, labeling and banding is available, 1) feeding system, with two format-adjustable rotary tables for the separate feeding of empty cans and lids, 2) REX EVF 327 vacuum filler, year of manufacture: 2017, 3) Fillpack R01-TI filling and closing machine, format: 75-400ml, year of manufacture: 2022, for filling, positioning and sealing the sealing foil as a tamper-evident seal, placing and screwing on the lid, 4) CDA NINON labeling system, year of manufacture: 2021, for lid, wrap-around and body labeling, 5) Garvens BF 8 S2 automatic checkweigher, year of manufacture: 2002, as an inline checkweigher with automatic rejection of products not conforming to the specified weight, 6) ECOMA can banding machine, max. output depending on format: approx. 35cans/min, year of manufacture: 2022, for control o ...

The line consists of the following devices: M-2500 fully automatic line for gluing mattresses using the HotMelt method, M210A - conveyor conveyor, M210 P - baling conveyor, M2100 - automatic mattress packing machine. Year of manufacture 2019

Press capacity 320 ton, with belt sander Auction-ID: A7-50851-7

Special version of the compact Kubota U10-3 mini excavator, built in 2019 and with a reading time of 411.7 hours. The machine has recently been serviced and is functioning properly, as is clearly demonstrated in the attached video. Features an auxiliary hydraulic line for hydraulic attachments, hydraulic sorting grapple, quick coupler, boom work light, rubber tracks, adjustable undercarriage, widening dozer blade and safety bar. The three different bins depicted in the photo are included in this lot. Thanks to its compact dimensions and adjustable working width, this mini excavator is particularly suitable for work in hard-to-reach places. The machine and attachments are in a well-kept used condition and show normal signs of wear. View the photos and video for a good impression of the condition, operation and complete execution. Auction-ID: A3-46134-22033

Equipped with: suitable for continuous coating/breading of meat, poultry and fish products, 400 mm working width, power: 0.9 kW. Auction-ID: A1-47448-53

Key data: 1000 mm, 1 mm

used CoilTec cross-shear, with hold-down and unwinder, mobile, with connection pockets to the Modular workbench, spout height 965 mm Note: Sheet metal infeed only possible from the left! Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Working width: 1000 mm Sheet thickness max. steel: 1.00 mm Weight: 120 kg Colour: anthracite grey/orange Dimensions::1320 x 1500 mm Coil weight: 250 kg

Used HUNDEGGER Speed Cut SC1 Fast cutting machine for various long components. Optimized cutting, drilling, milling, etc. Automatic feeding and execution. Various processing units including tools, as can be seen in photos. - Year of construction 2005 - Immediately available - more photos & video available - Dismantling and loading included - Tools as seen in photos, included. - Separate leftover piece conveyor belt not included.

Auction-ID: A7-50851-12

Beautiful Campervan equipped with E&P leveling system, air suspension. Camper is equipped with radio, swivel seats, pull-out bed above the front seats, refrigerator, freezer, 3-burner gas stove, sink, toilet, shower, 2x 1 person bed. Plenty of storage space at the back. Auction-ID: A1-47420-10

Consisting of 1x Langghut/De Groot labeling machine, 1x Nordson Saturn anti-slip machine, 1x Domino CX350i 2PH, total length approximately 4300mm. Auction-ID: A1-50393-26

Consisting of 1x Krones bottle dispenser, 1x Kettner KAF 2000 box erector, 1x 13 meter roller conveyor, 1x Kettner Blitzpac bottle packing machine, 1x 10 meter roller conveyor, 1x Kettner HD-VIDEO box sealing machine and 1x 8 meter roller conveyor, including 2 platform stairs and 1x ceiling mounted chain hoist Auction-ID: A1-50393-25

Berkel Pro Line GL30 cutting machine. This professional slicer has a 45-degree tilted blade that ensures a natural fall of the product, making it cut faster and more efficiently. In addition, the machine is equipped with a built-in and removable sharpener, which allows you to always keep the knife sharp with just one movement. In addition, the machine has a belt drive, which is quieter and requires less maintenance. Auction-ID: A1-40324-169

Press capacity 320 ton Auction-ID: A7-50851-9

Required tractor power: approximately 50 hp Number of rotors: 8, with 6 tine arms per rotor Trailed version with transport chassis Hydraulically foldable outer rotors and hydraulic lift Mechanical adjustment of the working angle Equipped with Lighting and road marking Auction-ID: A1-47393-55

The quantity indicated on the sheets is not necessarily guaranteed. Auction-ID: A1-50867-42

Capacity 630 tons, with DIMECO winders and unwinders Auction-ID: A7-50851-8

Pressing line consisting of: CATTANEO PRM 320-500-3000 mechanical press from 1976, SARONNI 600 coil unwinder from 1958, driver Auction-ID: A7-50851-5

Press capacity 320 tons, with unwinder and feeder Auction-ID: A7-50851-6

Missing battery Auction-ID: A1-40324-83

Consisting of 1x u-shaped feed conveyor belt (L = approximately 4 meters), 1x Langghut/De Groot labeling machine, 1x Nordson Saturn anti-slip machine, 1x Domino CX350i 2PH and 1x elevator belt (length approximately 4800mm. Auction-ID: A1-50393-12

These rims also fit directly on many models such as the Audi A3/S3/RS3, Volkswagen Golf, Seat Leon and Skoda Octavia. Make sure that the ET value does not deviate too much. Auction-ID: A1-47420-1004

Labelling line with two print and apply stations, This VWS Nederland line has a conveyor with two labelling stations in a row. Each station has its own printer and label reel, so you can print and apply two different labels or keep running on two reels. Each station has its own display control., The control panel has start and stop buttons per station and an emergency stop. We did not find a rating plate with the year of manufacture., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/vws-nederland-labelling-line-with-two-p rinters/, Type: Labelling line with two print and apply stations, Stations: 2, each with printer and label reel, Controls: Display per station, push-button panel with emergency stop, Construction: Stainless steel frame with conveyor

Serviced Continuous Butter Making Machine (CBM) equipped with a new Rittal control panel with simple and user-friendly controls. Stainless Steel frame execution. The machine is designed for the continuous production of sweet butter from cultured and / or sweet cream and is suitable for hygienic dairy processing applications. The CBM has a butter production capacity of approximately 750 kg per hour and is designed for an input of approximately 1,500 litres of cultered or / and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Completely electrically driven; Churning cylinder / Beater I: 11 kW, Churning cylinder II: 1,5 kW and Squeezer / Working section: 3,7 kW., The machine is equipped with a new Rittal electrical control panel, incorporating simple and clearly arranged controls for the main machine functions. The control panel includes:, - 3 x Danfoss  ...

Blowing machine SIG Blomax 8 KHS Aseptic filler and capper Capacity: approx. 15.000 bph based on 0,5 ltr. PET bottles Filling product: juice and tea Bottle size: 500 ml PET bottles Closure type: PCO 28 - 1810 The aseptic system is a wet aseptic system. Year of manufacturing: 2009 consisting of the available machines: "Blowing machine SIG Blomax 8 KHS Aseptic filler and capper Capacity: approx. 15.000 bph based on 0,5 ltr. PET bottles Filling product: juice and tea Bottle size: 500 ml PET bottles Closure type: PCO 28 - 1810 The aseptic system is a wet aseptic system. Year of manufacturing: 2009 consisting of the available machines: Blowing machine SIG Type Blomax 8 Preform feeding System Air conveyor system KHS Aseptic filler and capper Cap feeding unit Chiller (one compressor not working) HEPA Filter Unit Steam, Air, and Water Filter Syste ...

Manufacturer: DMG GILDEMEISTER Year: 2008 Type: CNC lathe with motorized tools with C and Y axes Numerical control: Heidenhain iT Plus Max. turning diameter: 400 mm Max. turning length: 600 mm Distance between tips: 615 mm Main spindle: 20–6,000 rpm – 16 kW – max. torque 155 Nm Bar capacity: Ø 52 mm – spindle bore 61 mm C-axis: 0.001° resolution Turret: 12 positions – 12 motorized tools (5,000 rpm, 3.7 kW) Strokes: X 160 mm / Z 450 mm / Y ±32 mm Fast feeds: X 60 m/min – Z 45 m/min Attachments: Chip conveyor, 12 bar HP coolant, workpiece catcher, fixed tool holders (5), motorized tool holders (3), hydraulic system Dimensions (mm): 8000 × 3000 × 2700 Weight (kg): approx. 4500 Remarks: Machine in good condition, powered on. Serial number included in the description. Auction-ID: A1-50714-4002

Used Tetra Pak A3 Flex 1000 SQ filling line 7000 PPHTechnical Specifications & Performance DataThis used Tetra Pak A3 FLEX 1000SQ filling line is designed for industrial packaging and beverage production in carton packages. The main filling machine was manufactured in 2005 and is configured for the 1000SQ format, with a production capacity of 7000 packages per hour. The filler has been upgraded from 100V to 300V.Main filling machine: Tetra Pak A3 FLEXMain format: 1000SQAdditional format capability: 500SQ through a quick change kitProduction capacity: 7.000 packages per hourIncluded accessories: 2 paper reels and 1 paper trolleyAdvanced Automation & Control SystemsThe line is arranged as an integrated carton filling and packaging system. Its format-specific configuration supports coordinated operation between the filler, cap applicator, accumulation equipment and cardboard packing section ...

Used Tetra Pak A3 Flex 200S, 100V filling lineTechnical Specifications & Performance DataThis used Tetra Pak A3 Flex filling line is configured for the 200S carton format and is centered on a Tetra Pak A3 Flex 100V filling machine manufactured in 2005. The line includes coordinated downstream equipment for carton handling, straw application and cardboard secondary packaging.Filler: Tetra Pak A3 Flex, version 100V, year 2005Line format: 200SAccumulator: Tetra Pak ACHX30-50M, year 2010Straw applicator: Tetra Pak SA22, year 2009Cardboard packer: Tetra Pak CBP32, year 2009Included accessories: 2 paper reels and 1 paper trolley supplied with the fillerAdvanced Automation & Control SystemsThe filling line is arranged as an integrated industrial packaging system, with the accumulator supporting product flow between filling and downstream operations. The equipment configuration is intended to co ...

CFS automatic slicer line, consisting of: - CFS slicer, type: UNI-SLICER, number: 450.2251, year of construction: 2004, plastic belt, belt width: 230 mm, clearance: 260 mm x 140 mm, diameter knife: 420 mm, slicer dimensions: 2550 mm x 880 mm x 2170 mm. - CFS dividing belt, wire belt, belt width: 270 mm, dimensions: 850 mm x 610 mm x 1110 mm. - CFS check weigher, type: CW2000MK3 091.1992, year of construction: 2004, plastic belt, belt width: 275 mm, dimensions: 700 mm x 780 mm x 1100 mm. - CFS outfeed belt, type: ATB 791 991.1994, plastic belt, belt width: 400 mm, dimensions: 3030 mm x 900 mm x 1260 mm. - CFS knife sharpener, type: KSM 60 091.2174, year of construction: 2004, dimensions: 710 mm x 530 mm x 1170 mm. Without transport rollies.

Manter BV sewing line for packaging bags with labeller, machine code: RSB-M, machine number: 211-132, year of construction: 06-2011, machine weight: 600 kg, rubber belt, belt width: 300 mm, mesh bags width: 600 mm, seal length: 700 mm, label width: 65 mm, total dimensions: 4500 mm x 1250 mm x 2300 mm.

dimensions: W800 x D550 x H1850 mm, connection: 230 volts Auction-ID: A1-50060-137

Stacker + buffer table Ø 1250 mm. Includes steel stacking bin/stacker and 4 belts transport trolleys. This lot is part of the final combination 53 (Lots 48 to 52) Auction-ID: A1-50060-52

SYLEX Fiber Optics S-line Modular Fibre-Optic Measurement / Test System Manufacturer: SYLEX Fiber Optics Series: S-line Equipment type: Modular Fibre-Optic Measurement / Test System Asset references: Z0000753 / 17IM00033 / 8800000643 Location: 91701 Trnava Modular fibre-optic measurement and testing system comprising SYLEX S-line measurement, optical switching and computer/control components. Supplied in a Peli 1520 protective transport case with fibre-optic accessories. Included equipment: SYLEX S-line Scan 800 measurement unit SYLEX S-line Switch 1×16 optical switching unit SYLEX S-line Comp computer/controller Peli 1520 protective transport case Fibre-optic patch leads and connectors Fujikura One-Click SC fibre cleaner Power accessories Associated accessories as photographed Controller interfaces: USB Dual LAN COM VGA Condition: Used extensively wi ...

2-head, with 1 Galli drying tunnel, type: TGV 20, 1x Firanko Techniek e.g. belt stacker, connection: 380 volts. Includes 4 belts of transport carts Auction-ID: A1-50060-6

Connection: 220 volts. Total dimensions: L185 x W63 x H155 cm. Table included Auction-ID: A1-50060-2

Dimensions: W950 x D850 x H1950 mm, connection: 230 volts. Includes 4x transport cart straps Auction-ID: A1-50060-17

Dimensions: W950 x D850 x H1950 mm, connection: 230 volts. Includes 4x transport cart straps Auction-ID: A1-50060-18

consisting of: 1x Galli server (14.16), year of manufacture: 2000, 1x A+A stamping machine (20.05) model: FS 90, maximum working width: 50mm, belt speed infinitely adjustable (1998), 1x Bibo punch crosscut cutting machine (20.07), model: FCA 93N (2013), 1x A+A linkage machine (15.04), 1x belt stacker (14.19) 1x buffer table, Ø 1250mm, 1x stacking box and 4 belt transport trolleys. Auction-ID: A1-50060-47

Connection: 220 volts. Total dimensions: L185 x W63 x H155 cm. Table included Auction-ID: A1-50060-3

consisting of: 1x paint / polishing machine (13.04), model: FCE (2001), 1x drying tunnel (14.07), type: TGV 20 (1998), 1x paint polishing machine (13.03), 1x drying tunnel (14.05), type: TGV-20 (1998), 1 conveyor belt (14.09), model R1, (1995), 1 grinding machine, model: RC 50 and double steel material tray. The final combination is part of the lots (54 to 58) Auction-ID: A1-50060-59

Dimensions: W950 x D850 x H1950 mm, connection: 230 volts. Includes 3x transport cart straps Auction-ID: A1-50060-14