molding line used for sale

General SKU071E295 MakeTechnoglass Italy No.2803 Year of construction1984 LocationBarneveld Material Lining materialGlass - Enamel Pressure Working pressure20 Bar Vacuum possiblecheck Working pressure jacket7 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume3355 Ltr. Specified Features - Glass-lined Reactor Reactor(1x) Capacity3355 Ltr Vessel sizesdia. 1600x1300mm Dished bottomcheck Dished top sidecheck Manholedia. 350x450mm Top connections(6x) Outletdia. 100mm With jacket(350 Ltr) Max. temperature-25/200 Degr. C. Without motorcheck Information Floorspace2,0x2,0 M Total height4,0 M Weight6000 KG Technical specs Extra informationcheckCatalysts & fillersSolventsGlass-lined ReactorsDiscountDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIAgrochemicalsBiotechnologyOther chemicalFine chemicals ...

General SKU221S092 MakeTycon (It) Type6300 ltr. No.3950 Year of construction1990 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket7 Bar Main Features MaterialGlass Volume6300 Ltr. Motor18.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity7595 ltr. (nett 6300 ltr) Vessel sizesdia. 2000x2800mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connectionsDN150 (5x) DN250 (2x) OutletDN150 With jacket(695 ltr.) Max. temperature-30/200 degr. C With paddle stirrercheck Motor18,5 kW 380 Volt (Ex) Speed mixing shaft30-120 rpm Glass Reactors MaterialGlass Information Floorspace2,6x2,6 M Total height5,7 M Weight8500 Kg ATEX compatiblecheckCatalysts & fillersSolventsGlass-lined ReactorsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIAgrochemicalsB ...

General SKUR1200 MakeDe Dietrich & Cie (FR) LocationBarneveld Type6300 ltr. Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket7 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume6300 Ltr. Motor11.2 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity7385 Ltr (nett.6300 ltr) Vessel sizesdia.2000x3060mm Dished bottomcheck Dished top sidecheck Manhole350x450 Top connections2x DN250, 5x DN150 OutletDN150 With jacket(735 Ltr) Max. temperature-30/200 degr.C. With propellor stirrercheck Motor3,07/11,2 kW 380 Volt (Ex) (402/1465 rpm) Speed mixing shaft32 / 116 rpm Glass Reactors MaterialGlass - Enamel (3008) Information No.55158 Year of construction1985 Floorspace2,5x2,5 M Total height4,8 M Weight8500 Kg ATEX compatiblecheckCatalysts & fillersSolventsGlass-lined ReactorsDetergent & surf.Other pharmaceutics ...

General SKUR0905 MakeTechnoglass spa (top part) / Tycon (vessel part ) (IT) TypeAE 6300 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket7 Bar Main Features MaterialGlass Volume6300 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity6300 ltr (Nett.) Vessel sizesdia. 2000x3060mm Dished bottomcheck Dished top sidecheck Manholedia. 500mm (man hole cover missing) Top connectionsDN250 (2x), DN150 (5x) OutletDN150 With jacket(685 ltr.) Max. temperature-25/250 Degr.C With anchor stirrercheck Motor15 kW 380 Volt (Ex) Glass Reactors MaterialGlass Information No.4512 Year of construction1990 Floorspace2,4x2,4 M Total height5,1 M Weight9000 Kg ATEX compatiblecheckCatalysts & fillersSolventsGlass-lined ReactorsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid pharmaceuticsDyes  ...

turning diameter:640 / 400 mm turning length:1500 mm control:Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z:550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis):±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z:40/24/60 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:12 / 23 kW Torque of milling spindle:100 Nm Tool magazine for milling spindle (turret 1):120 HSK-A 63 Tool change time tool/tool, milling spindle:1,6 s Spindle 1 RPM:4000 1/min Spindle 1 power:36/ 45 kW Spindle 1 Torque:730 Nm Spindle 1 max. bar diameter:90 Spindle 2 RPM:4000 1/min Spindle 2 power:36 / 45 kW Spindle 2 torque:730 Nm Spindle 2 max. bar diameter:90 c-axis:0,001 ° Travel turret 2 x:225 mm Travel Turret 2 z:1595 mm RPM of rotary tools turret 2:4000 1/min no. of tools in turret 2:12 VDI 40 high-pressure pump:20 bar total power requiremen ...

turning diameter:325 mm turning length:600 mm total power requirement:35 kW spindle drive:25 kW spindle turning speed range:5000 U/min speeds of tool:4500 U/min rapid traverse X-axis:60 m/min diverse toolholders:VDI 40 rapid traverse Z-axis:45 m/min weight of the machine ca.:6,5 t dimensions of the machine ca.:3,5 x 2,5 x 2,1 m Machine with SIEMENS 840 D control power line with shopturn - C and Y-axis, driven tools - bar loader IRCO ILS-RBK - coolant device with coolant throough revolving head - Revolver - counter spindle - chip conveyor - collet clamping - part catcher

pressure:600 t distance between columns:3640 mm stroke:350 mm no. of strokes:11 - 44 /min Distance table/ram, max. stroke up, adjustment up:1550 mm table surface area:3600 x 2500 mm sliding table:3600 x 2500 mm ram surface:3600 x 2500 mm Side window:2200 mm ram adjustment:400 mm material width coil line:500 - 1950 mm Material thickness at 1200 mm material width:0,6 - 2,5 mm Material thickness at 1850 mm material width:0,6 - 2,0 mm Material thickness at 1950 mm material width:0,6 - 1,75 mm Coil weight:35,0 t coil internal diameter:610 mm coil external diameter:900 - 1900 mm no. of straightening rolls:13 straightening roll diameter:50 mm Stack height:400 mm stacking dimensions - station 1+2 (L x W):150-2000 x 250-2000 mm stations:2 power requirement:112,0 + 35,0 kW Weight:390,0 t Dimensions (WxDxH):7,3 x 5,1 x 15,0 m Height above floor:9,1 m Height below floor:5,9 m clutch-/ brake combinat ...

General SKU251U330 LocationBarneveld CEcheck Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialGlass Motor15 KW Surface3 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface3 m² Capacity3500 Ltr. (max. 5900 Ltr.) Vessel sizesø 2000 x 1500 mm Plate sizesø 2000 mm Top connectionscheck DN80 (6x), DN50 Solids outletcheck DN300 Liquid outletcheck DN80 Max. temperature0 / 100 ºC With stirrercheck Hasteloy 2.4602 Stirrer Motorcheck 15 kW 400V 1455 rpm (Ex) Stirrer speed3-25 rpm (reversibel) Cake thicknessmax. 500 mm Cake capacity± 1570 Ltr. Stirrer can be liftedcheck With hydraulic unitcheck 1,5 kW 230/400 V (Ex) MaterialGlass - Enamel, Stainless steel 2.4610 (Hastelloy C-4) Information MakeMavag / EHW Thale Mach.No.6 1 2045 Year of construction1998 Mounted on legscheck Floorspace2,4 x 2,4 m Total height5,75 m ...

General SKU269X296 MakePrism Type16 mm Euro-lab Mach.No.3944 Year of construction2000 Sizes Screw diameter16 mm Main Features Motor1.25 KW Inlet diameter20 mm L/D22 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter16 L/D22 DC-motor1,25 kW, 240 volt, 3000 rpm Hydraulic motorcheck Screw speed0 to 500 rpm Feeding with hoppercheck Feeding with metering screwcheck 0,26 kW, 3000 rpm Used onThermoplastic compounds CapacityUp to 5 kg/h MaterialStainless steel Information LocationSold With switchgearcheck Floorspace1,10x0,80 m Total height1,30 m Weight300 kg CEcheck Extra SpecificationsWith mobile cooling bath, dimensions 2,15x0,40x1,20 m, Prism, sheet haul off unit, type KX16, dimensions 0,80x0,50x1,40 m, Extruder with Scada touchscreen control Double screw extrudersThermofischerExtruders > Double screw extrudersBrand > Thermofis ...

CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 22 Nm Tool interfaces: ER 25, ER 32, saw blade flange 30 mm, dia. max. 300 mm We recommend with saw blade or for heavy duty rough milling a gear reduction: Type DUO, version R Max. drive speed 12,000 R.P.M. Max. tool spindle speed 8,000 R.P.M. Gear Ratio i = 1:0,676 Torque max. 22 Nm

Kelch KENOVA set line V346CYear of manuf. : 2024 ____________Description:Technical Data:Toollength (max.):600 mmTool-ø (max.):400 mmElectric connection:230V/50HzAirpressure:6 barIn general:Control system:Kelch EASY 10Display:24 TFTTaper:High-precisionspindle UWS-II SK50Handling:CNCEquipment/Accessory:Positionsensor:Direct ScalesTurningcentermeasuring:Incidentlight camTool adapters:HSK63Dataoutput:LabelprinterFurther Accessory:Autofocus (CNC-Drive in C-Axis)

1 pc for sale, in working order, good condition Husky HPN 726619 HMI Human Machine Interface FOR SALE XYCOM 9960 Operator Station HMI for Husky G-line, Index-line & others PET Preforms Injection Molding Machines. Exworks Miami USA contact us: j.plaul@optimisense Whatsapp +5491157143569 US Mobile +1.305.831.8888 Skype: optimisense For more info and pictures join our FB group HUSKY USED PET PREFORMS RELATED MACHINERY

Linear bearing, linear rail, linear guide, roller guide rail, without guide carriage, guide rail -Guide rail with: 2 pieces of slide -Length: 1600 mm -Dimensions: in the pictures -Price: per piece -Number: 2 pieces -Dimensions: 1600/100/H48 mm -Weight: 13.2 kg

Used Pasta Filata Plant PRIMA / ALPMA, Type: WCLSE-1000/1 For the production of Pasta Filata cheese with high dry matter, such as pizza cheese, Kashkaval, etc. Composed of: - Filleting machine, type: WCLSE-1000/1 - Climbing auger, type: cochlear conveyor - Cutting device, type: CHT50B003 - Lifting and tilting device FRONTMATEC Hygiene GmbH, type: 27000 for 200 and 300 litre standard trolleys - Capacity: 200 - 800 kg/h Plant out of order. Viewing possible.

Used pastry machine CANOL, type: CA-L -in bakery condition- - Dough preparation CA-L (built in 2001) - Calibration unit TS/0 (built in 2002) -Longitudinal section -Guillotine - Incl. many cutting tools (cutting rollers) - incl. band C/L (built in 2001) The system was still in use until recently and works without any problems. Visits and test runs are possible by arrangement.

Linear unit, linear axis, portal axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripperREXROTH INDRAMAT Type: MKD0771B-061-KP1-KNIdent No. 247238 0001Year of construction: 2000Axis movement: 2400 mmCarriage length: approx. 500 mmTotal length: 3520 mm- pneumatic feed pliers (clamping pliers with 2 Festo compressed air cylinders)- Standard linear guide 65 x 25 mm- basic profile made of steel- ball screw 32 x 10 mm- pneumatic with position indicator- Permanent Servo Motor Type:

JWell cast film line 160cm widht CPE CPP microembossed cast film line 15-100 gram m2 CPP, CPE embossed film line

https://www.seeburg.net/de/lautsprecher/gl-16/5 Sold as a pair in a flight case, with the following accessories per set: - 2x Powercon connection cables, - 4x U-bolt screw M8, - 4x star handle screw M8, - 4x connecting plate + screws, - 2x tripod frame Auction-ID: A7-45172-15

https://www.seeburg.net/de/lautsprecher/gl-16/5 Sold as a pair in a flight case, with the following accessories: per set: - 2x Powercon connection cables, - 2x link cables Powercon/XLR, - 4x U-bolt screw M8, - 4x star handle screw M8, - 4x connecting plate + screws Auction-ID: A7-45172-11

https://www.seeburg.net/de/lautsprecher/gl-16/5 Sold as a pair in a flight case, with the following accessories per set: - 2x Powercon connection cables, - 4x U-bolt screw M8, - 4x star handle screw M8, - 4x connecting plate + screws, - 2x tripod frame Auction-ID: A7-45172-14

https://www.seeburg.net/de/lautsprecher/gl-16/5 Sold as a pair in a flight case, with the following accessories: per set: - 2x Powercon connection cables, - 2x link cables Powercon/XLR, - 4x U-bolt screw M8, - 4x star handle screw M8, - 4x connecting plate + screws Auction-ID: A7-45172-10

https://www.seeburg.net/de/lautsprecher/gl-16/5 Sold as a pair in a flight case, with the following accessories per set: - 2x Powercon connection cables, - 4x U-bolt screw M8, - 4x star handle screw M8, - 4x connecting plate + screws, - 2x tripod frame Auction-ID: A7-45172-13

https://www.seeburg.net/de/lautsprecher/gl-16/5 Sold as a pair in a flight case, with the following accessories per set: - 2x Powercon connection cables, - 4x U-bolt screw M8, - 4x star handle screw M8, - 4x connecting plate + screws, - 2x tripod frame Auction-ID: A7-45172-12

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage -Manufacturer: THK, 4 pieces guide rails with 8 pieces guide carriages/slides -Guide carriage: Type SR -Rail length: 410/340 mm -Rail width: 23 mm -Dimensions: in the pictures -Delivery/Price: complete -Transport dimensions: 410/100/50 mm -Weight: 6.7 kg

linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, electric spindle drive, electric linear drive, window drive -Manufacturer: Geze, electric linear drive type E212R/230V-AC Ovp -Ident.-No.: 05428 -Stroke length: 42-66 mm -Network: 230 V DC -Shaft: Ø 20 mm -Number: 1x linear drive available -Dimensions box: 230/100/H50 mm -Weight: 1.0 kg

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage -Manufacturer: igus DryLin T, guide rail with 2 guide carriages drylin T -Guide carriage: Type TW-01-25 -Rail length: 300 mm -Rail width: 34 mm -Number: 6x linear guide available -Price: per piece -Transport dimensions: 300/70/35 mm -Weight: 1.0 kg/piece

Linear bearings, flange bearings, housing bearings, flange bearing units, tandem linear ball bearings -Linear bearings: Tandem linear ball bearings -Type: Shaft diameter 20mm long version -Bolt circle: Ø 43x6 mm -Material: Steel casing, plastic ball cage -Number: 8x linear bearings available -Price: per piece/minimum order 2 pieces -Dimensions: Ø 54 x 80 mm -Weight: 0.2 kg/piece

Linear bearings, flange bearings, housing bearings, flange bearing units, tandem linear ball bearings -Linear bearings: Tandem linear ball bearings -Type: Shaft diameter 16mm long version -Bolt circle: Ø 35x5 mm -Material: Steel casing, plastic ball cage -Number: 8x linear bearings available -Price: per piece/minimum order 2 pieces -Dimensions: Ø 46 x 68 mm -Weight: 0.1 kg/piece

SALE ONLY OUTSIDE GERMANY. Complete production line, consisting of: LAWECO Lift OEST glue mixing plant BÜRKLE CBM1400 - Brushing machine BÜRKLE DAK1300 - Glue Applying Machine KRAFT Disc Conveyor KRAFT Paper Coater SERGIANI LAS230 - 10ET Press Bonding Station Pruning station Laying station Stacking Auction-ID: A1-45406-10

Control: Siemens 810 Main drive Number of spindles: 1 Spindle speed range: 12000 1/min Tool holder: Sk 40 Movement X-axis movement: 640 mm X-axis feed: 0-40 m/min X-axis feed force: 7000 N X-axis rapid traverse: 60 m/min X-Axis Precision: 0.027 Y-axis movement: 600 mm Y-axis feed: 0-40 m/min Y-axis feed force: 7000 N Y-axis rapid traverse: 40 m/min Y-Axis Precision: 0.024 Z-axis movement: 500 mm Z-axis feed: 0-40 m/min Z-axis feed force: 7000 N Z-axis rapid traverse: 40 m/min Workpiece Workpiece Z: 500 mm Max. table load: 600 kg Work table Tool Changer Available grooves: 30 Max. weight of tools: 7 kg Max. diameter of the tools: 140 mm Auction-ID: A7-45416-264

Control: Siemens 810 Main drive Number of spindles: 1 Spindle speed range: 12000 1/min Tool holder: Sk 40 Movement X-axis movement: 640 mm X-axis feed: 0-40 m/min X-axis feed force: 7000 N X-axis rapid traverse: 60 m/min X-Axis Precision: 0.027 Y-axis movement: 600 mm Y-axis feed: 0-40 m/min Y-axis feed force: 7000 N Y-axis rapid traverse: 40 m/min Y-Axis Precision: 0.024 Z-axis movement: 500 mm Z-axis feed: 0-40 m/min Z-axis feed force: 7000 N Z-axis rapid traverse: 40 m/min Workpiece Workpiece Z: 500 mm Max. table load: 600 kg Work table Tool Changer Available grooves: 30 Max. weight of tools: 7 kg Max. diameter of the tools: 140 mm

Used injection molding machine, Manufacturer of Husky Injection Systems Ltd. Type: GL225RS60/50 Year of constr.: 23.04.1998 400 V, 96 A greatest engine, 42 A total load heating Functional The machine can be visited like us. Price: 8.000,00 plus VAT, from stock Sale even after parts possible

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2

Complete control CC 90 for ENGEL injection moulding machines

various spare parts incl.

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

many moldes available for Husky Glines and Hypets Husky Moog Servo Valve HPN 4952777 Compatible with Later Hypet & Hylectric injection molding machines, Hypets 4.0 & 5.0, Used in working order 6 Months Warranty (1) Piece available

Key data: 150 , 394 , 50

Manufacturer/manufacturer: Krauss Maffei Typ/type: KM 110-390 C1 Year/year: 1993 Control/controller: MC 4 Clamping force/clamping force: 1500 kN Holmabstand/Dist.Betw.Tiebars: 500 mm x 500 mm Disk size/platen size: 750 x 750 mm WZ height/mould hight: min 250 max 500 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 1060 mm Auger/screw size: 50 mm Stroke volume/shot volume: 442 CC / 394 gram PS Spritzdr / injection pressure: 1946 bar General / General engine power: 30 kW Heating/heating power: 14,8 kW Dimensions/dimensions: 5.5 m x 1.6 m x 2.10 m Weight/weight: 5600 kg Screen text: German Options/optional extras Core puller / core pulling: x 1 Air valve / air valve: x 1

POWER: 500 TON

PLASTIC MOLDING MACHINE FOR CONSTRUCTION POWER: 600 TON FLOOR FROM 1130 X 1130 MM SWITCHING BETWEEN COLUMNS: 730 X 730 MM

VERTICAL PRESS RUTIL MODEL: ZEUSS1000TCDDB MATR. C06/100 YEAR: 2000 CLOSING FORCE: 1000 TON VOLTAGE: 380 V FREQUENCY: 50 HZ POWER: 216 KW PRESS. AIR: 6 BAR PRESS H20:4.5 BAR

80 TON YEAR: 2008 POWER: 28KW