mold used for sale

UNDER NEGOTIATION HUSKY GL300 System 48mm +3025 +Edible Oil 32mm + 2921 molds OPPORTUNITY HUSKY GL300 YEAR 1998 MOLDS + 48mm water neck finish 32 cavity complete mold (hot runner) with 2 sets of core (81gr~85gr~91gr.) + 30/25 water neck finish 48 cavity complete mold (hot runner) with 1 core set (16~18.2 gr) + 32mm edible oil (snap on)(wide edible oil) neck finish cold half mold with core set (24~27gr.) + 29/21 edible oil 25 gr neck finish preform change over kit. Auxiliaries: Piovan mold dehumidifier, resin dryer with hopper, and T conveyor 400v 50hz Condition: Fair condition, connected (can be inspected) More pictures upon request USA Line: +1 305 831 8888 whatsapp +5491157143569 j.plaul@optimisense

Injection molding machine efficient in operation, connected to the media, giving the opportunity to check the operation of all functions, as well as start production to verify the condition of the injection molding machine. In the years 2010-2018, the injection molding machine was equipped with a three-axis Wittmann W711 ROBOT, so the injection molding machine is 100% configured and prepared to work with a ROBOT Additional information: The Procan CT software in English or German is equipped with advanced functions for monitoring the injection process as well as monitoring all functions of the injection molding machine equipment Touch screen + quick access keypad. Interface has a built-in memory for saving programs without the need to read data from a 3.5 floppy disk. Floppy disk drive: 3.5 allows data transfer in both directions ATTENTION The injection mold and the mold mounting ...

For sale are 3 Sumitomo Demag IntElect 150/520-410 injection molding machines in good technical condition, complete with hydraulic stations, Witmann Battenfeld W-721 robots (3 axes) and robot work area fences. Stored in a heated room. Unfortunately, there is no way to see the operating time, because... The injection molding machines are not connected to the power supply. Clamping unit 1500. Closing force 1500 kN, holding force 1650 kN, opening stroke max. 495 mm, built-in mold height min/max 275/585 mm, max. the distance between the plates for clamping the mold is 1080 mm, the plates for clamping the molds are 770x770 mm, the clearance between the columns is 520x520 mm, the weight of the mold is max. 1700 kg, which makes the weight of the mold on the movable clamping plate 1150 kg. Ejector. ejector stroke - 125 mm, ejection force 35 kN, ejector return force - 35 kN Injection unit 41 ...

Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing system for thermoplastics with a screw diameter of 45 mm - Levels for the foundation of the Nolato machine - Hydraulic blockade of reverse rotation of the auger - Hydraulic auger drive with standard speed - SVO open nozzle in 2-piece design (nozzle body with screw-in nozzle). - A device for sorting good and defective parts. Pneumatic pendulum. Pendulum speed approx. 3 sec. Free-standing device under the machines discharge shaft. Including electrical standard connector and software (Pos. 42.42). - Single pneumatic valve on the movable mold clamping plate for the blowing function (1 piece of 3/2 separating valve with 1 magnetic coil). Control to choose between road/time or time/time. Possibility to manually set the flow using 1 thrott ...

Year of production: 2004 Total installed power: 185 kW Max. injection speed: 160 mm / s Max. injection pressure: 1560 bar Screw diameter: Ø76 mm Max. shot weight for PP: 1020 g Mold closing force: 6350 kN Clearance between H x V columns (↔ x ↕): 1060 x 960 mm Mold height min: 450 mm Max. mold height: 1000 mm Max. mold opening stroke: 940 mm Max. ejector pin height: 300 mm Centering rings diameter: 160 mm Max. ejector stroke: 300 mm Form H x V clamping plates dimensions: 1500 x 1400 mm Aggregate volume: 2487 g The diameter of the hole in the mouthpiece: Ø 8 mm The injection molding machine in good condition is constantly used in current production, it is possible to see it on site or send a movie with an example of operation.

Krauss Maffei KM 80-380 CX hydraulic injection molding machine Year of production - 2022 Fully hydraulic closing system. The MC 6 control system is based on an industrial computer in real-time Ethernet technology, equipped with an integrated 21.5” control panel with a color touch screen. Plasticizing system complete plasticizing system for thermoplastics with a screw diameter of 40 mm, with a return lock and an open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD VERSION Closing unit – Mold clamping force: kN 800 – Mold opening force: kN 55 – Dimensions of the mounting plate (h x v): mm 670 x 670 – Clearance between columns (h x v): mm 420 x 420 – Mold opening stroke: mm 500 – Minimum mold height: mm 250 – Opening width: mm 750 – Ejector stroke: mm 150 – Ejector force forward/reverse: kN 23 / 10 injection unit  ...

Two twin machines available Fully hydraulic closing system. MC 4 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 90 mm, with a return lock and an open nozzle. Closing system: Clamping force: 5000 kN Mold opening force, max.: 280 kN Movable pressure plate Sliding force Opening: 137 kN Movable pressure plate Sliding force Closing: 116 kN Mold plate size (hxv): 1270mm x 1200mm Distance between columns (hxv): 900 mm x 800 mm Mold opening stroke: 1170 mm Min. mold height: 480 mm Maximum opening path: 1650 mm Hydraulic ejector - stroke: 250 mm Forward/reverse ejection force: 92548 kN injection unit Screw diameter: 90 mm Injection pressure: 1742 bar Injection volume : 1953 cm³ Injection weight, PS: 1777 gr Injection rate: 649cc/sec Screw spee ...

Krauss Maffei KM 125-390 C2+ injection molding machine Year of production - 1999 Fully hydraulic closing system. MC 4 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system complete plasticizing system for thermoplastics with a screw diameter of 40 mm Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD VERSION Closing unit – Mold clamping force: kN 1250 – Mold opening force: kN 70 – Dimensions of the mounting plate (h x v): mm 745 x 770 – Clearance between columns (h x v): mm 470 x 470 – Mold opening stroke: mm 600 – Minimum mold height: mm 300 – Opening width: mm 900 – Ejector stroke: mm 150 – Ejector force forward/reverse: kN 22 / 10 injection unit – Screw diameter: mm 40 – Ls/D ratio: – 20 – Injection pressure: 1860 bar – Injection volume: cm3 204 – Inject ...

Krauss Maffei KM 300-1000 CX injection molding machine Year of production - 2010 Fully hydraulic closing system. MC 5 control system with color monitor, integrated control panel and built-in disk drive. SP 1000 plasticizing system complete plasticizing system for thermoplastics with a screw diameter of 50 mm, with a return lock and an open nozzle Nozzle radius 15 mm, nozzle opening 3 mm. Closing unit – Mold clamping force: kN 3000 – Mold opening force: kN 169 – Dimensions of the mounting plate (h x v): mm 995 x 1050 – Clearance between columns (h x v): mm 630 x 630 – Mold opening stroke: mm 820 – Minimum mold height: mm 330 – Opening width: mm 1150 – Ejector stroke: mm 200 – Ejector force forward/reverse: kN 58/28 injection unit – Screw diameter: mm 50 – Ls/D ratio: – 22.0 – Injection pressure: bar 2304 – Injection volume: cm3 432 – Inje ...

Krauss Maffei KM 200-1000 CX Year of production - 2021 Fully hydraulic locking system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 21.5 ″ control panel with a color touch screen. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 55 mm, with back-lock and open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Closing unit - Mold clamping force: 2000 kN - Mold opening force: 101 kN - Mounting plate dimensions (h x v): mm 915 x 915 - Clearance between columns (h x v): mm 560 x 560 - Mold opening stroke: mm 700 - Minimum mold height: mm 350 - Opening width: mm 1050 - Ejector stroke: mm 200 - Ejector force forward / reverse: 58/28 kN Injection unit - Screw diameter: mm 55 - Ls / D ratio: - 20.0 - Injection pres ...

Automatic traysealing machine, for preformed containers. Semi new used equipment. From the manufacturer INAVEN MASCHINEN AG (VC999), model TS1200 N. Specially designed for packaging in heat sealing format with vacuum and with modified atmosphere, to achieve greater conservation, better presentation, as well as ease of storage and transport. It automatically performs the MAP cycle, heat sealing and gas injection, perfect film trimming and automatic film collection. It has 2 sealing lasts in different formats. Lasts for sealing 2 containers at the same time. • External dimensions 4400 mm long x 870 mm wide x 1790 mm high, input tape 2700 mm long, output tape 1120 mm long. • Power 6 kW; • Power supply 400 V, 50 Hz; • Measures of containers by molds: 1st Mold 225x180 mm x 2 containers 2nd Mold 180x130 mm x 2 containers • Film width 460 mm; • Roller width 480 mm; � ...

Description MAXIMUM MOLD DIMENSION 400X400mm MINIMUM ACTUAL MOLD THICKNESS 320mm MAXIMUM ACTUAL MOLD THICKNESS 479mm 2 WARM ROOMS 2 PNEUMATIC JACKS

Spotting- and test injection press make REIS type TUS 60 AMachine -No: 791, built in 1974Max. Mold area: 600 x 1000 mmMax. Mold height: 727 mmMax. Mold weight: 2500 kgEjector force at 100 atm oil: 2000 kgPressing force infinitely variable: 10 tControl capacity: 1/100 mmSwing radius of the upper swivel plate: 92 °Load capacity of the upper swing-out plate: 1500 kgLoad capacity of the carriage plate: 2500 kgHeight of the column guide: 245 mmInjection volume: 2.5 lSpec. Spray pressure: 2 - 15 kg / cmColumn diameter: 80 mmDrive power: 5.5 kWHeating power: 1.2 kWAir connection: 2 - 15 atüDimensions L x W x H approx.: 1420 x 1360 2810 mmWeight approx. 2300 kgWith- Control panel- Test sprayer- Heater- ejectorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We ...

Sandwich Shapes Bread Mold Box Mold Toast Mold External dimensions: 56x30cm Internal dimensions: 12cm wide 28,5cm Long 11cm High

Semi-automatic traysealer, for preformed containers. Practically new used equipment. From the manufacturer ULMA, model SMART 300. Specially designed for packaging in heat-sealing format to achieve a better presentation, as well as ease of storage and transport. It automatically performs heat sealing, perfect film trimming and automatic film collection. It has 2 sealing lasts in different formats. Lasts for sealing 2 containers at the same time. • External dimensions 1020 mm long x 1050 mm wide x 1540 mm high. • Power 6 kW; • Power supply 400 V, 50 Hz, 3W+N+PE • Measures of containers by molds: 1st Mold 225x180 mm x 2 containers. 2nd Mold 180x180 mm x 2 containers, plate Q. • Film width 390 mm; • Roller width 450 mm; • Aluminium rollers; • With seal-only function. • Sealing area 450x350 mm; • Maximum tray height 100 mm; • Pneumatic mold lifting system ...

Machine description - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW Year of production 2015 Dimensions 326x120x220 [cm] Weight 4000 [kg]

Battenfeld Microsystem 50 injection molding machine Year of production - 2001 Unilog B4 control technical data of the clamping unit, clamping force: 50 kN size of mold plates h: 364 mm mold plate size v: 196 mm min. mold height: 100 mm max. open daylight: 300 mm opening stroke: 200 mm technical data of the injection unit screw diameter: 14 mm injection volume: 1.1cc injection pressure: 2,500 bar measures and weight machine dimensions lxbxh: 1.862 m x 0.81 m x 2.428 m total weight: 1050KG

Krauss Maffei KM 320 – 2700 C3 injection molding machine Year of manufacture -2003 Control : MC4 Technical data Closing unit Clamping force: 3200 kN Size of mold plates: 1240 mm x 1240 mm Distance between columns (h x v): 710 mm x 710 mm Mold opening stroke: 769 mm Mold height min.: 120 mm Hydraulic ejector - stroke: 251 mm injection unit – Screw diameter: mm 70 – Ls/D ratio: – 23 – Injection pressure: bar 2389 – Injection volume: cm3 1097 – Injection weight: g 998 – Injection efficiency: cm3/s 393 – Number of screw revolutions: 1/min 272 – Plasticizing efficiency 1): g/s 83/108option – Nozzle pressure force: kN 129 Electrical and hydraulic equipment Adjustable hot runner zones: 20 Hydraulic cores: 2 pcs Euromap connector 12 Hydraulic cylinder tip valve Electric scooping motor Air valves 2 pcs

Battenfeld HM 100/525 Injection molding machine Year: 2006 Control version: B 4 Technical details Closing force: 1000 kN Mold plate size (hxv): 680mm x 594mm Distance between columns: 470 mm x 420 mm Mold opening stroke: 500 mm Mold height min .: 250 mm Maximum ground clearance: 750 mm Hydraulic ejector - stroke: 150 mm Ejector force forward / back: 41.2 kN Injection unit Screw diameter: 40 mm Ls / D ratio: 22 Injection pressure: 2,100 bar Injection volume: 251 cm³ Shot weight, PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1 / min Plasticization rate: 30.4 g / sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating capacity: 12.1 kW Adjustable barrel heating zones: 1 + 3 Pump power 18.5 kW Oil 275 liters Dimensions and weights Total machine weight: 4.600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m the machine has a hyd ...

MC5 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 50 mm TECHNICAL DATA Closing unit - Mold clamping force: 1760 kN - Mounting plate dimensions (h x v): mm 790 x 740 - Clearance between columns (h x v): mm 560 x 510 - Way of opening the mold max: mm 450 - Height of the mold development min./max: mm 200/600 - Plate opening stroke: mm 1050 - Ejector stroke: mm 130 - Ejector force: 49 kN Injection unit - Screw diameter: mm 50 - Ls / D ratio: 20.2 - Injection pressure: 1892 bar - Injection volume: cm3 393 - Injection weight for PS: 357 g - Injection capacity: cm3 / s 314 - Number of screw revolutions, max: rpm 320 - Nozzle clamping force: 29.4 kN Electrical parameters - Connection value: kW 38 - Heaters power: kW 15.6 - Number of cylind ...

Description: TrimStar The TrimStar is a very compact punching machine with integrated mold that has combined the functional principles behind the CutStar (bottom mold rotation) and the TrimStar Eco (top mold vertical stroke). Approx. Onsite Dimension. (l x w x h): 2,800 x 2,900 x 3,400 mm, weight approx.: 16,000 kg

Description: TrimStar The TrimStar is a very compact punching machine with integrated mold that has combined the functional principles behind the CutStar (bottom mold rotation) and the TrimStar Eco (top mold vertical stroke). Approx. Onsite Dimension. (l x w x h): 2,800 x 2,900 x 3,400 mm, weight approx.: 16,000 kg

Description: TrimStar The TrimStar is a very compact punching machine with integrated mold that has combined the functional principles behind the CutStar (bottom mold rotation) and the TrimStar Eco (top mold vertical stroke). Approx. Onsite Dimension. (l x w x h): 2,800 x 2,900 x 3,300 mm, weight approx.: 16,000 kg

Motorized Film Indexing Max. Film width 805 mm Double Heating:Top Heater 81.90 kW Lower Heater 54.60 kWGabler M92XL Thermoformer, age 2009, with Cup Mold for Ø95mm PP Cups, Sheet Sag Control Max. Form Area 765 x 436 mm Indramat Servomotor Plug Assist Max. Depth of draw 150 mm (optional 200 mm) Clamping pressure 380 kN Motor Drive Rating 81.90 kW Air Pressure 6 - 10 bar Max. dry cycle speed 52/ minGabler M92XL Thermoformer, age 2009, with Cup Mold for Ø95mm PP Cups, Bottom Platten with Tilting movement Inline Counter/ Stacker Unit Counted products delivered to delivery conveyor at 90degs. to machine direction Suitable for PS, PP, PVC, ABS, PLA, PET etc. Siemens S7 PLC Controls Siemens SIMATIC MULTI PANEL Touchpad Display Inclusive of PP Cup Mold for Ø95mm PP Cups, 22-Cavity and associated Stacking Parts

Engel Injection Moulding Machine e-Cap 3440/420 T. Consider this machine had a new list of 447k in 2013 – see attached. Today new price is around 650k. Working hours is only 18384. Machine from 2012 and still in production Clamp force to/ kN 420/4200 Opening force kN 420 Opening stroke mm 700 Mold height max. mm 750 Mold height min. mm 350 Mould fixing platens h x v mm 1350 x 1350 Tie bar distance hor. x vert. mm 920 x 920 Ejector stroke mm 220 Ejector force forward / return kN 120 mold weight, max on moving platen/center of gravity1 kg/mm 6200 / 315 Dry operation time sec @ imm 2.1 @ 600

Description: TrimStar The TrimStar is a very compact punching machine with integrated mold that has combined the functional principles behind the CutStar (bottom mold rotation) and the TrimStar Eco (top mold vertical stroke). Approx. Onsite Dimension. (l x w x h): 2,800 x 2,900 x 3,300 mm, weight approx.: 16,000 kg

Can make meatballs and burgers up to 130mm in diameter. and height up to 30 mm; – The height can be adjusted; – Equipped with a speed controller; – Limit switch for more tape security; – Motor: 0.3 kW – Single-phase motor – Hopper capacity 24 l. Standard shapes: Round burgers with diameter: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm. Depending on the chosen thickness, a different weight of the final product can be achieved with one mold. Accessories: As standard, the machine comes with one mold. As an option, you can also order: Round burgers with a diameter of: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm.

Press clearance for boneless hams, Spanish type format, from the manufacturer ROSER, model 02. Rectangular mold in stainless steel. Against molds of technical plastic material Boneless ham format Spanish type of 6 to 7 kg. Interchangeable mold formats. Hydraulic drive. Regulation of massage and pressing time. Safety system operated by two pushbuttons. Built in AISI-304 stainless steel. External measurements: length 1090 mm x width 1650mm x height 2050mm. Weight: 1800kg. Power consumption: 4Kw. 400V. Air consumption: 5 liters/min Production of: 30/120 pcs /h. Ham press, ham press, rectangular ham press, meat machinery, machinery for sausages, machinery for hams. Its condition is excellent re-release. Equipment revised and guaranteed practically new.

Automatic traysealer is sold, for preformed containers. Semi new used equipment. From the manufacturer ULMA, model TAURUS 300. Specially designed for packaging in heat sealing format with vacuum and with modified atmosphere, to achieve greater conservation, better presentation, as well as ease of storage and transport. It automatically performs the MAP cycle, heat sealing and gas injection, perfect film trimming and automatic film collection. It has 1 sealing lasts. Dimensions of the welding area Last for sealing 2 containers at once: 250 x 180 mm. Busch vacuum pump of 100m3/h RED special for injection of OXYGEN with values greater than 20%. Automatic tray sealing machine Ulma Taurus 300 • Overall dimensions 2300 mm long x 1000 mm wide x 1750 mm high, input tape 1000 mm long. • power 7 kW; • power supply 400 V, 50 Hz; • Mold 250x180 mm x 2 containers. • film width 460 mm; ...

Traysealer Ilpra model Food Pack Tank with vacuum pump Bush. As characteristics of the machine we highlight the following: automatic film collector, macula detector for printed film, new BUSCH vacuum pump of 63 m3, input feed belt for trays in automatic, Exit of the machine by dragging by chains to roller outlet, prepared to pack with protective atmosphere, with vacuum and only heat-sealed. Automatic traysealer, works at cycles of 2 trays and production capacity of 12 cycles per minute with heat sealing with vacuum and gas. The heat sealing machine performs a welding process from one thermoplastic to another thermoplastic or other compatible material, using heat and pressure.  It is used to make a protective atmosphere by extracting oxygen from inside the container and replacing it with an inert gas, or it only performs the sealing action and can also be sealed with vacuum. The machine  ...

Liquidation of ILPRA automatic traysealer of the FOODPACK series, model 500 v/g. It is a traysealer of Italian manufacture, with rotary table in 2 positions. The machine can perform 4 different packaging functions: sealing only, vacuum/sealing, vacuum/sealing/modified atmosphere (MAP). It is suitable for the use of a wide range of packaging of any material (PP, PS, APET, CPET, cardboard, etc.) using compatible film. Foodpack 500 has been designed to offer a compact solution (occupies just under 2 m / 2 ) and allows, thanks to a high technological content, to meet high production needs (up to 1440 pieces / hour) depending on the type of mold from 1 to 4 containers per cycle. The solidity and versatility of this model, together with an optimal value for money, have made the Foodpack 500 V/G one of the most successful machines. Built with first class components, with exclusive noble materia ...

Manufacturer: Germany Year of release: 2005 Clamping force: 1000 t Raw material injection volume: 4372cm3 Built-in mold height max: 1200 mm Built-in mold height min: 500 mm Auger diameter: 95 mm Working equipment, serviced.

GeneralUniversal machining centre; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal600 mmCross500 mmVertical500 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmDie and Mold Package linear incl. B-/C-TorqueDie and Mold Package linear incl. B-/C-Torque Dynamic package V-type Eagle timing belt for Z axis Torque table B-/C-axis including ATC AVD - Heidenhain or MVC - Heidenhain (starting NC 340590 11) APC and Top Speed - Siemens High End cooling unit for machiSpindle speed 20.000 rpm, HSK-A63Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min- ...

Used thermopacking machine from Ulma, model TF-SUPRA. Year of production 2006. The machine uses two types of foil. The lower foil is plastic and, passing through the forming station under the influence of heat and stretching, takes the shape of the mold, creating a package. Once the foil has cooled, it moves to the loading area where the products are placed into the package, this function can be performed manually or automatically using special assistive devices. After filling the molds, the upper foil is placed above the mold and welded to it, it is possible to simultaneously create a vacuum in the package and fill it with protective gas. Ultimately, the cutting station separates the packages into individual or groups that leave the machine in exactly the condition in which the recipient is to receive them.

2 shapes, 4 cavities each suitable for Flexblow FB 4 One mold 355 ml, round bottle, neck Bericap 38-2. Bottle weight 25 g One mold square bottle1.420 ml (48 oz). Neck 38 mm. Bottle weight 65 g Immediately available

Automatic encrustation- confectionery and confectionery machine new Double filling machine with cutting rod function Standard mold size and weight: Popcorn Cookie 25g Diameter 45mm Rotating twist 50 g length 90mm Cyclone volume 30 g diameter 55mm Mochi mold 30 g directly 35mm Two-color strip cookie 40g length 60mm Moon cake 60 g directly 50mm Two-color cookie 30g diameter 40mm Encapsulated cookie 30g diameter 40mm Cwjbewkq Pick up from 14547 Beelitz or shipping with extra shipping costs for more info please send email or by Whatsapp 00491605664856

Semi-automatic for the production of PET bottles - ZENTRONIK ZR-7 with two forms. The device is used for the production of PET bottles from semi-finished products. 1. Heating furnace for heating PET preforms - 24 kW (dimensions: 1500mmX50mmX1320mm) 2. Semi-automatic PET bottle making machine (dimensions: 1900mmX630mmX1420mm) 3. Bottle mold: single hole mold for 5 liter bottle. ATTENTION! It is possible to convert the machine into a different bottle format for a fee, e.g. a 0.5-liter double-cavity bottle or any other shape and capacity depending on the needs of the buyer. Technical condition: very good as new

Description Electrical drawing machine 12 zone mold heating software package n ° 1 and 2: extensive control of the mechanical mold functions for complex applications, extended movements software package n ° 3: production control software package n ° 5: optimization helps the operator software package n ° 6: quality assurance software package n ° 7: documentation with real value protocol

Maker: SUMITOMO HEAVY INDUSTRIES (made in Japan) Model: FPA-3000 Year: 1985 (2) Capacity & main specification 1) Capacity: 3000tf 2) Ability Limit Point: 5mm 3) Allowable eccentric load: 3000tf 4) Allowable eccentric distance: L&R 350mm 5) Slide stroke: 350mm 6) Slide stroke speed: 20~50spm 7) Stroke number: 20tpm(Max) 8) Shut height: 1200mm 9) Slide adjust distance: 10mm 10) Bed hard plate dimensions: RL 1300mm x FB 1500mm 11) Slide dimensions: RL 1200mm x FB 1400mm 12) Slide knockout capacity: Total 20tf (pin number: 4ea) 13) SKO stroke: 50mm ( adjust up) 40mm ( adjust down) 14) Bottom knockout capacity: 50tf (pin number 4ea) 15) BKO stroke: 20~30mm 16) Upright internal dimensions: RL 1400mm 17) Main motor: DC 200kw x 1450rpm 440V 18) Floor height: 6800mm 19) Working height: 1030mm 20) Side opening: FB 1000mm x TB 1400mm 21) Flywheel energy: 200tf-m (50spm)  ...

Tuschier- and test injection press make REIS type TUS 60 A 10 HMachine -No: 177/66, built in 1966Table surface: 590 x 600 mmMax. Shaped area: 600 x 1200 mmMax. Mold height: 680 mmMax. Mold weight: 2.5 tStroke of the table: 500 mmEjector stroke: 200 mmEjector force at 100 atm oil: 2000 kgPressing force infinitely variable: 0 - 10 tControl capacity: 1/100 mmSwing radius of the upper swivel plate: 92 °Stroke speed stepless: 0 - 80 mm / sLoad capacity of the upper swivel plate: 1500 kgLoad capacity of the carriage plate: 2500 kgHeight of the column guide: 245 mmInjection volume: 2.5 lSpec. Spray pressure: 2 - 15 kg / cmDrive power: 5.5 kWHeating power: 1.2 kWAir connection: 2 - 15 atüDimensions L x W x H: 1420 x 1360 2810 mmWeight approx. 2300 kgWith- Test sprayer- Heater- ejector- swivel top plate m. hydr. locklittle usedPrice on request.Delivery: ex warehouse or location free loading tru ...

- Manufacturer: Bekum - Machine type: BAS 34.2 - Stations / Stations: Single station / Single station - Year of construction / Built: 2001 - Location Germany - Control system: Original Bekum Beckhoff - Extruder | Extruder: 100/24D - Hose head / Parison head: AKZ4 (New by UES !) - Mold dimensions mm /mold dimensions mm (A length/ length x B width/ width x C depth/ depth): 700/700/2250 - Bottle volume Max./ Bottle volume max.: 30 lit - Monitor language: German/English - Delivery time | Delivery time: 30 days/ 30 days - Weight (kg): 13000

-Manufacturer: TESSA -Capacity: 1500 Btls/h -Filling Machines - Two Pcs -Labeling device ( Self- adhesive labels) -Shrink tunnel -Set of conveyers -PET Bottles blowing machine -Mold for blowing PET bottles 1 l -Mold for blowing PET bottles 0.5 l

SANDRETTO MEGA T 4435/610 injection moulding machine (1998) 610 ton thermoplastic injection machine In working condition. Euromap 4435/610 Screw diameter: 21 Calculated injection volume: 2831cm3 Screw length (LD): 21 Maximum injection capacity: 746 cm3/1” Laminating capacity: 86 g/1” Pressure on material: 1548 bar Closing force: 610 tons. Variable displacement engine torque: 5570 Nm. Screw speed: 153 RPM Screw hydraulic motor power: 120 HP Injection group stroke: 725 mm. Heating zones: 4+nozzle. Total heating power: 38 kW. Mold locking force: 5985 kN Mold thickness min/max.: 300/1000 mm. Mobile plane stroke: 930 mm. Plate dimensions: 1270 x 1270 mm. Column passage: 850 x 850 mm. Column diameter: 160 mm. Extraction force: 103 kN Puller stroke: 350 Vacuum cycles: 10-11 n/1” Hydraulic circuit pressure: 160 bar Oil tank capacity: 850 l. Electric motor powe ...

(BEING NEGOTIATED) HUSKY HYPET AE 230 RSE 80D/80 + MOLD + AUX inc CHILLER OCT 2013 Mold : 14g x 48 (30mm neck for water) cavity (HUSKY) Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FASTEST DELIVERY MUST GO ASK FOR VIDEO WILL NOT LAST LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2008 21.7g 96cav mold Expected delivery July2023 Can be inspected and seen in production

Krauss Maffei PET Machine with Milk neck finish mold 27.5G 48cav 450-4500 CS PET 450Ton year 2010 Mold 27.5Grams 38mm Milk neck finish (requires attention) 48 cavities 25sec cycle Can be inspected

WILL NOT LAST Husky Hypet 300 P100/110 E100 year 2010 working hs approx 65.000 Condition In production Availability Immediate Auxiliaries Resin dryer with hopper and Mold dehumidifer Cavities 72 Mold YES 2925 water short 12g and 13g 3025 water long/milk 13g 14.5g 15.5g 17.5g ask for info and dont delay

Complete system for automatic Filling of products into cups/tubs SIEMENS PLC Control S7-300 With 2 cup formats: square and rectangular Filling capacity up to 4200 cups/hour Filling volume: 10-150 ml, manually adjustable With automatic lid attachment and closure Mold kit 1: for square plastic cups (tubs) Cup size: 92 x 92mm, lid size 96 x 96 mm, for different heights from 30 to 42 mm Content: approx. 100/ 125 ml Mold set 2: for rectangular plastic cups (tubs) Cup or tub size: 78 x 95 mm (W/L), height 28.8 mm Content: approx. 90 ml Output up to approx. 4200 units/hour / approx. 350 – 400 kg/hour

Automatic traysealer, for preformed containers of last generation, very fast, efficient and with 2 sets of mold. Used equipment completely revised and reconditioned. From the manufacturer CFS, model STAR 2 HS. Built entirely in stainless steel. Specially designed for packaging in heat sealing format with vacuum and with modified atmosphere, to achieve greater conservation, better presentation, as well as ease of storage and transport. It automatically performs the MAP cycle, heat sealing and gas injection, perfect film trimming and automatic film collection. It has 2 sealing molds, 1st for containers 1/2GN 2 trays per sealing last, Dimensions of the welding area, for the molding of 2 containers at the same time (1/2GN): 260 x 320 mm. Sealing area measures 700 x 300mm. 2nd for containers 1/4GN 5 trays per sealing last. Welding area dimensions, for molding 5 contain ...

Semi-automatic traysealer from the manufacturer DOSITERM, model SEMI V/G, ready for packaging with protective atmosphere, with vacuum or only heat sealing. Semi-automatic traysealer, works at cycles of 4 or 8 containers depends mold, 5/8 cycles per minute, depends on the working function. Tray feeder by automatic trolley. Output of the machine through the same input carriage.  The heat sealing machine performs a welding process from one thermoplastic to another thermoplastic or other compatible material using heat and pressure. It is used to make a protective atmosphere by extracting oxygen from inside the container and replacing it with an inert gas, or it only performs the sealing action and can also be sealed with vacuum. The machine is ready to plug in and work with. External measurements (mm): Height: 1800, Length: 1720, Depth: 1400. It has 2 molds to work. Rect ...