120,836 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
Seller: Szczep-pol s.c.
Key data: 500 kN
Arburg 270C 500-100 Year of construction: 1998 Injection unit: Screw diameter: 20 mm Injection weight: 26 g Injection pressure: 2500 bar Dosing volume: 31 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 270x270 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Operating hours: approx. 50,000 h Euromap 12 Robot Interface Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal The machine has an additional control panel - control by remote control The machine was regularly serviced by Arburg's authorised service Metrics: Weight: 2200 kg Length/Width/Height: 3.42x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.3 kW Total power: 21.3 kW All offered machines are started by our service technicians before they are sold. It is possib ...
Seller: Szczep-pol s.c.
Key data: 500 kN
Arburg 320A 500-170 with the sprue picker / electric machine Year of construction: 2005 Injection unit: Screw diameter: 35 mm Spray weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 446x446 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot Interface Injection unit hardened - Bimetal Central lubrication Machine with built-in Arburg conveyor belt and original sorting flap Metrics: Weight: 3500 kg Length/Width/Height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating capacity: 5.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the select ...
Seller: Szczep-pol s.c.
Key data: 500 kN
Arburg 320C 500-170 with the Wittmann WP80 sprue picker Year of construction: 2006 Injection unit: Screw diameter: 30 mm Spray weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection A new injection unit is installed in the machine Built-in conveyor belt and sorting flap Sprue Picker Wittmann WP80 Year of construction: 2016 Travels in axes: X-100, Y-550, Z-90° Touch control panel Purchase of the sprue picker for an extra charge Metrics: Weight: 2400 kg Length/Width/Height: 3.41x1. ...
Seller: Szczep-pol s.c.
Key data: 500 kN
Arburg 320C 500-170 with the Wittmann W811 robot Year of construction: 12/2006 Injection unit: Screw diameter: 30 mm Spray weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap Robot Wittmann W811 Year of construction: 2010 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot at an additional co ...
Seller: Szczep-pol s.c.
Key data: 600 kN
Arburg 320C 600-250 / Machine in very good technical condition Year of construction: 2001 Injection unit: Screw diameter: 35 mm Spray weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 60 t Tie bar spacing: 320x320 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Very good technical condition Machine Has Produced Molded Parts For Medical Industry - Pure Production Conditions Core Pull Control Injection unit hardened - Bimetal Built-in sorting flap Metrics: Weight: 2330 kg Length/Width/Height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected ...
Seller: Szczep-pol s.c.
Key data: 700 kN
Arburg 320K 700-250 with the Arburg Multilift H lateral robot Year of construction: 2005 Injection unit: Screw diameter: 40 mm Spray weight: 158 g Spray pressure: 1390 bar Dosing volume: 188 ccm Clamping unit : Clamping force: 70 t Tie bar spacing: 320x320 mm Size of clamping plates: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Air valve x 3 Control with hot runners Injection unit hardened - Bimetal Central lubrication Metrics: Weight: 2350 kg Length/Width/Height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.1 kW Total power: 21.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On req ...
Seller: Szczep-pol s.c.
Key data: 700 kN
Arburg 320K 700-250 Year of construction: 2004 Injection unit: Screw diameter: 35 mm Spray weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 70 t Tie bar spacing: 320x320 mm Size of clamping plates: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Injection unit hardened - Bimetal Central lubrication Metrics: Weight: 2350 kg Length/Width/Height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.1 kW Total power: 21.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Seller: Szczep-pol s.c.
Key data: 700 kN
Arburg 320K 700-250 Year of construction: 2005 Injection unit: Screw diameter: 35 mm Spray weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 70 t Tie bar spacing: 320x320 mm Size of clamping plates: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Injection unit hardened - Bimetal Central lubrication Metrics: Weight: 2350 kg Length/Width/Height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.1 kW Total power: 21.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Seller: Szczep-pol s.c.
Key data: 700 kN
Arburg 370S 700-100/100 / 2K machine / Operating hours: 33,544 in automatic mode / Very good technical condition Year of construction: 2009 Injection unit: Screw diameter: 30 mm Spray weight: 65 g Spray pressure: 1390 bar Dosing volume: 71 ccm Clamping unit: Clamping force: 70 t Tie bar spacing: 370x370 mm Size of clamping plates: 510x510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Machine Operating hours: 33,544 in automatic mode Euromap 67 Robot Interface Air valve x 5 Hydraulic core pull x 2 Control with hot runners Reinforced Injection Units - Bimetal Proportional valves on spray units - precise spraying Parallel Movements The vertical injection unit - screw diameter fi 20 mm (29 g/PS) Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Machine with buil ...
Seller: Szczep-pol s.c.
Key data: 700 kN
Arburg 320KS 700-250 Year of construction: 11.2002 Injection unit: Screw diameter: 40 mm Spray weight: 158 g Spray pressure: 1390 bar Dosing volume: 188 ccm Clamping unit: Clamping force: 70 t Tie bar spacing: 320x320 mm Size of clamping plates: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Air valve x 3 Control with hot runners Injection unit hardened - Bimetal Central lubrication Metrics: Weight: 2350 kg Length/Width/Height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.1 kW Total power: 21.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Seller: Szczep-pol s.c.
Key data: 800 kN
Arburg 420C 800-250 Year of construction: 1999 Injection unit: Screw diameter: 35 mm Spray weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Very good technical condition Machine Has Produced Molded Parts For Medical Industry - Pure Production Conditions Euromap 12 Robot Interface Core Pull Control Injection unit hardened - Bimetal Metrics: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live tec ...
Seller: Szczep-pol s.c.
Key data: 750 kN
Arburg 320M 750-90 Year of construction: 1996 Injection unit: Screw diameter: 25 mm Injection weight: 26 g Injection pressure: 2500 bar Dosing volume: 31 ccm Clamping unit: Clamping force: 75 t Tie bar spacing: 320x320 mm Size of clamping plates: 490x490 mm Ejector: hydraulic Clamping unit: hydraulic Control: MULTRONICA Additional equipment: Air valve x 1 It is possible to set the injection unit vertically It is possible to change the screw diameter for fi 20, 30, 35 mm Metrics: Weight: 2360 kg Length/Width/Height: 4.24x1.90x2.05 m Drive: Pumps/motor: 15 kW Heating capacity: 4.6 kW Total power: 19.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On reque ...
Seller: Szczep-pol s.c.
Arburg 420C 800-250 with the Anvil+Langbein sprue picker Year of construction: 1999 Injection unit: Screw diameter: 40 mm Spray weight: 158 g Spray pressure: 1390 bar Dosing volume: 188 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot Interface Control with air valve Core Pull Control Injection unit hardened - Bimetal Metrics: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On re ...
Seller: Szczep-pol s.c.
Key data: 800 kN
Arburg 370S 800-350 Year of construction: 2000 Injection unit: Screw diameter: 35 mm Spray weight: 117 g Injection pressure: 2500 bar Dosing volume: 139 ccm Clamping unit : Clamping force: 80 t Tie bar spacing: 370x370 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap Robot Interface Hydraulic core pull x 2 Injection unit hardened - Bimetal Built-in sorting flap Integrated original Arburg sprue picker on the side Metrics: Weight: 3800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company i ...
Seller: Szczep-pol s.c.
Key data: 1000 kN
Arburg 420C 1000-350 Year of construction: 1995 Injection unit: Screw diameter: 40 mm Spray weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 100t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: DIALOGICA Additional equipment: Euromap Robot Interface Hydraulic Core Pull X1 Metrics: Weight: 3700 kg Length/Width/Height: 4.35x1.64x2.08m Drive: Pumps/motor: 22 kW Heating capacity: 8.6 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Seller: Szczep-pol s.c.
Key data: 850 kN
Arburg 320M 850-210-210 / 2K machine Year of construction: 1992 Injection unit: Screw diameter: 25 mm Spray weight: 62 g Injection pressure: 2950 bar Dosing volume: 73 ccm Clamping unit: Clamping force: 85 t Tie bar spacing: 320x320 mm Size of clamping plates: 490x490 mm Ejector: hydraulic Clamping unit: hydraulic Control: MULTRONICA Additional equipment: Euromap 12 Robot Interface Air Valve x 7 Hydraulic core pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 25 mm Metrics: Weight: 3010 kg Length/width/height: 0x0x0 m Drive: Pumps/motor: 22 kW Heating capacity: 8 kW Total power: 30 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Ł ...
Seller: Szczep-pol s.c.
Key data: 1000 kN
Arburg 420C 1000-290 with the Geiger MiniServo 0.5 sprue picker Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 172 g Spraying pressure: 1530 bar Dosing volume: 188 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap It is possible to change the screw diameter The machine was regularly serviced by Arburg's authorised service Metrics: Weight: 3740 kg Length/Width/Height: 4.14x1.63x2.07 m Drive: Pumps/motor: 15 kW Heating capacity: 6.4 kW Total power: 21.4 kW All offered machines are st ...
Seller: Szczep-pol s.c.
Key data: 1000 kN
Arburg 420C 1000-350 / Very good technical condition Year of construction: 2002 Injection unit: Screw diameter: 40 mm Spray weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit : Clamping force: 100 t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Euromap 67 Robot Interface Hydraulic core pull x 1 Hot runner control x 10 Injection unit hardened - Bimetal The machine is integrated with the original Arburg conveyor belt Built-in sorting flap Metrics: Weight: 3430 kg Length/Width/Height: 4.35x1.64x2.08 m Drive: Pumps/motor: 22 kW Heating capacity: 10.2 kW Total power: 32.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests ...
Seller: Szczep-pol s.c.
Key data: 1000 kN
Arburg 470S 1000-290 / Production line with the Wittmann W821 robot / Operating hours: approx. 35,000 h in automatic mode Year of construction: 2012 Injection unit: Screw diameter: 30 mm Injection weight: 97 g Injection pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Size of clamping plates: 637x637 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Operating hours: 35,000 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic, needle core pull, controlled by a proportional valve x 2 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Cavity pressure sensor Priamus Robot Wittmann W821 Year of construction: 2012 5-axis robots: 4 axes ...
Seller: Szczep-pol s.c.
Key data: 1000 kN
Arburg 470H 1000-800 e² with the Wittmann W821 robot / Hybrid machine / Operating hours: 16,458 h in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 55 mm Spray weight: 434 g Spray pressure: 1650 bar Dosing volume: 474 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Size of clamping plates: 637x637 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 16,458 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter - energy saving The injection unit is driven by the servo motor, which is controlled by an ...
Seller: Szczep-pol s.c.
Key data: 1300 kN
Arburg 470S 1300-350 Year of construction: 2001 Injection unit: Screw diameter: 35 mm Spray weight: 117 g Injection pressure: 2500 bar Dosing volume: 139 ccm Clamping unit: Clamping force: 130 t Tie bar spacing: 470x470 mm Size of clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot Interface Hydraulic core pull x 1 Hot runner control x 6 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Built-in print quality control system from Sensor Kistler - tool pressure measurement Type of injection unit: Vario - This offers the possibility to use the injection unit, e.g. for side spraying The new injection unit is installed in the machine Metrics: Weight: 5100 kg Length/Width/Height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating c ...
Seller: Szczep-pol s.c.
Key data: 1300 kN
Arburg 470S 1300-350 Year of construction: 2001 Injection unit: Screw diameter: 35 mm Spray weight: 117 g Injection pressure: 2500 bar Dosing volume: 139 ccm Clamping unit : Clamping force: 130 t Tie bar spacing: 470x470 mm Size of clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot Interface Hydraulic core pull x 1 Hot runner control x 6 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Built-in print quality control system from Sensor Kistler - tool pressure measurement Type of injection unit: Vario - This offers the possibility to use the injection unit, e.g. for side spraying The new injection unit is installed in the machine Metrics: Weight: 5100 kg Length/Width/Height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heatin ...
Seller: Szczep-pol s.c.
Key data: 1300 kN
Arburg 420C 1300-675 with the Star sprue picker Year of construction: 2002 Injection unit: Screw diameter: 50 mm Spray weight: 297 g Spray pressure: 2080 bar Dosing volume: 353 ccm Clamping unit: Clamping force: 130 t Tie bar spacing: 420x420 mm Size of clamping plates: 605x605 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot Interface Air valve x 2 Hydraulic core pull x 2 Injection unit hardened - Bimetal Type of injection unit: Vario - This offers the possibility to use the injection unit, e.g. for side spraying Covers from the operator's side open automatically Metrics: Weight: 4330 kg Length/Width/Height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All offered machines are started by our service technicians before they are sold. It is possib ...
Seller: Szczep-pol s.c.
Key data: 1500 kN
Arburg 470C 1500-150/150 / 2K machine / machine in very good technical condition Year of construction: 2005 Injection unit: Screw diameter: 25 mm Injection weight: 49 g Injection pressure: 2500 bar Dosing volume: 54 ccm Clamping unit : Clamping force: 150 t Tie bar spacing: 470x470 mm Size of clamping plates: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: 2K Machine Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Type of injection unit: Vario - This offers the possibility to use the injection unit, e.g. for side spraying Parallel Movements The vertical injection unit - screw diameter fi 25 mm (49 g/PS) It is possible to change screw diameters in both injection units for the screw diameters recomm ...
Seller: Szczep-pol s.c.
Key data: 1300 kN
Arburg 520S 1300-800 / Machine in very good technical condition Year of construction: 2008 Injection unit: Screw diameter: 50 mm Spray weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 130 t Tie bar spacing: 520x520 mm Size of clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot Interface Air valve x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorised service company Arburg in the United States. Metrics: Weight: 6450 kg Length/Width/Height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the se ...
Seller: Szczep-pol s.c.
Key data: 1500 kN
Arburg 470C 1500-675 Year of construction: 2004 Injection unit: Screw diameter: 60 mm Injection weight: 427 g Spray pressure: 1440 bar Dosing volume: 508 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 470x470 mm Size of clamping plates: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot Interface Core Pull Control Injection unit hardened - Bimetal Parallel Movements Metrics: Weight: 4660 kg Length/Width/Height: 5.00x1.93x2.22 m Drive: Pumps/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Seller: Szczep-pol s.c.
Key data: 1500 kN
Arburg 470C 1500-400 with the Wittmann W721 robot Year of construction: 12.2006 Injection unit: Screw diameter: 40 mm Spray weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 470x470 mm Size of clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 1 Injection unit hardened - Bimetal Built-in conveyor belt and sorting flap Robot Wittmann W721 Year of construction: 2006 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1200, Z-3000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Metrics: Weight: 4900 kg Length/Width/Height: 4 ...
Seller: Szczep-pol s.c.
Key data: 1500 kN
Arburg 470C 1500-800 with the Sepro Industrial Robot 65 sprue picker Year of construction: 2021 Injection unit: Screw diameter: 50 mm Spray weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 470x470 mm Size of clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Perfect technical condition, machine like new Operating hours: 7,788 h in automatic mode Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Pneumatic Core Pull x 2 Pneumatic nozzle closing valve x 2 Injection unit hardened - Bimetal Sprue Picker Sepro Industrial Robot 65 Year of construction: 2021 Purchase of the sprue picker at an additional cost It is possible to buy the machine with another robot It is possible to buy a Moretto raw materi ...
Seller: Szczep-pol s.c.
Key data: 2000 kN
Arburg 570H 2000-2100 with the Sepro Industrial Robot SDR 22S robot / Hybrid machine / Operating hours: approx. 29,000 h in automatic mode Year of construction: 2010 Injection unit: Screw diameter: 70 mm Injection weight: 984 g Spray pressure: 2000 bar Dosing volume: 1078 ccm Clamping unit : Clamping force: 200 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 29,000 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Air Core Pull x 7 Hot runner control x 15 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter - energy saving The injection unit ...
Seller: Szczep-pol s.c.
Key data: 2000 kN
Arburg 570C 2000-150/60 / 2K machine Year of construction: 2003 Injection unit: Screw diameter: 35 mm Injection weight: 97 g Spray pressure: 1620 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 200 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot Interface Hydraulic Core Pull x 2 Hot runner control x 12 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 18 mm Machine with 1 cylinder/battery with compressed nitrogen (extra charge for fast working) It is possible to install a turntable in the machine - at an additional cost Metrics: Weight: 8000 kg Length/width/height: 0x0x0 m Drive: Pumps/motor: 30 kW Heating capacity: 9.4 + 3.2 kW Total power: 42.6 kW All offered machines are started by ou ...
Seller: Szczep-pol s.c.
Key data: 2000 kN
Arburg 570E 2000-800 with the Sepro Industrial Robot 65 sprue picker / Electric machine / Operating hours: approx. 3,500 h in automatic mode Year of construction: 2021 Injection unit: Screw diameter: 50 mm Spray weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Perfect technical condition, machine like new Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 3,500 h in automatic mode Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 2 Air core on solid plate side x 2 Pneumatic nozzle closing valve x 2 Injection unit hardened - Bimetal Central lubrication Parallel Movements Sprue Picker Sepr ...
Seller: Szczep-pol s.c.
Key data: 2000 kN
Arburg 520C 2000-350/150 / Production line with the Wittmann W731 robot Year of construction: 2008 Injection unit: Screw diameter: 40 mm Spray weight: 166 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 520x520 mm Size of clamping plates: 728x728 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2-Component Injection Molding Machine Very good technical condition Euromap 67 Robot Interface Air Valve x 4 Hydraulic, needle core pull, controlled by a proportional valve x 3 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the vertical injection unit – precise injection Parallel Movements Screw diameter in vertical injection unit: ⌀25 mm - 49 g/hp Robot Wittmann W731 Year of construction: 2008 5-axis robots: 3 axes ar ...
Seller: Szczep-pol s.c.
Key data: 2200 kN
Arburg 570S 2200-290/100/100 / Production line with the Wittmann W843 robot / Operating hours: 23,897 h in automatic mode Year of construction: 2014 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 23,897 h in automatic mode Euromap 67 Robot Interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed ...
Seller: Szczep-pol s.c.
Key data: 2200 kN
Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot Interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed ...
Seller: Szczep-pol s.c.
Key data: 3200 kN
Arburg 1500T 3200-1300 e² / Hybrid machine with one turntable Year of construction: 2011 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Spray pressure: 2000 bar Dosing volume: 664 ccm Clamping unit: Clamping force: 320 t Tie bar spacing: 0x0 mm Size of clamping plates: 1510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30,000 in automatic mode Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 3 Hot runner control x 13 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter Very precise turntable, driven by a servo motor, controlled by an inverter Turntable diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Sel ...
ALREADY SOLD Hypet 500 for sale We only sell the machine with a mold 144 cavity complete mold 29/25 neck finish preform weight 10.63 grams made by Husky This machine HPP 4.0 and ISS, fast speed. Cycle 6.2 (83612 preforms per hour) 2 Million preforms per day Manufactured 2011 Installed 2012 380v 50hz Excellent condition
Seller: AMARON s.r.o.
Inv. Num. : 6779 Type: Hi-MOLD 560/5A Producer: HYUNDAI WIA Created: 2014 Parameters: Control system: SIEMENS Working table length: 500 mm Working table width: 270 mm Number of axles: 5 pieces Maximum table load (uniform): 250 kg Spindle drive power: 33 kW X-axis travel: 1000 mm Y-axis travel: 560 mm Z-axis travel: 450 mm Maximum vertical spindle speed: 24000 1/min Cone: HSK-A63 Number of all tools: 24 pieces Rapid traverse X/Y/Z: 50 m/min
Seller: AMARON s.r.o.
Inv. Num. : 6780 Type: Hi-MOLD 750/5A Producer: HYUNDAI WIA Created: 2014 Parameters: Control System: Fanuc Series 31i-MODEL A5 Working table length: 630 mm Working table width: 500 mm Maximum table load (uniform): 500 kg X-axis travel: 650 mm Y-axis travel: 765 mm Z-axis travel: 510 mm Maximum vertical spindle speed: 15000 1/min Cone: HSK-A63 Number of all tools: 30 pieces Max. tool weight: 8 kg Machine height: 3865 mm Machine length: 4235 mm Machine width: 2797 mm Machine weight: 18000 kg
Seller: Industrialbay
Mazak Mold Maker 2500 Milling Machine :::SPECIFICATIONS::: CNC Model: Mazatrol CNC Version: PC FUSION CNC 640M Tool holder: ISO 40 Spindle speed: 12000 Number of tools: 24 X-axis stroke: 1020mm Y-axis stroke: 510mm Z-axis travel: 460mm Rapid feeds for linear axes X Y Z: 30m/min Guides: roller High refrigerant pressure: yes Portal type: Gantry with fixed upright moving table Chip conveyor: belt conveyor Presetting: yes
Seller: BlowMolderSale
Two-station machine with double head for container 5 ltr in double cavity or triple head for subject 500 - 950 ml. Extruder S 100. With removal robot, conveyor belts for bottles and waste. Mill, cooling unit, material handling. 380V 60 Hz
used
Seller: BlowMolderSale UG
Two-station machine for canister 4 x 5 ltr. Extruder S 100. Double and triple heads with 250 mm center to center. Clamping force 196 kN. With view strip extruder, cutting edge, removal robot, conveyor belt. Maquire mixer, refrigeration unit. Very few operating hours
Technical Sheet of Thermoforming Machine Model: SF-VF-22-13-06p Year 2007 Brand: QS Group Status: For sale Delivery time: Immediately Description This single station thermoforming machine is designed and built to meet the requirements of various production sectors, for small and medium productions of thermoplastic materials with thicknesses ranging from 1 mm to 10 mm and maximum dimension of plates up to 2310 x 1360 mm. This is a machine in very good working order. • Maximum dimension of the plates: 2310 x 1360 mm • Thickness of the plates: up to 10 mm • Loading the plate and unloading the product: Manual Mold holder table: • Maximum stroke: 90 mm • Maximum mold height: 600 mm • Mold base height: 195 mm • Closing force: 27 kN • Contains: Stroke control with linear transducer, vacuum line for forming the part, water line for thermoregulation of the mo ...
Closing unit Clamping force [kN] 8000 Dimensions of mounting plates (hxv) [mm] 1610 x 1530 Clearance between columns (hxv) [mm] 1120 x 1000 Min./max. mold height [mm] min 600 Maximum opening width [mm] 2000 Injection unit Screw diameter [mm] 95 Injection volume [cm3] 3367 Injection weight [g] 3064 Injection pressure [bar] 1795 Electrical and hydraulic equipment Rated power of the pump motor [kW] 90 Heater power [kW] 61 Dimensions and weight Net weight with control cabinet [t] 55 Dimensions (length x width x height) [m] 10.5 x 2.65 x 2.4 Hydraulic auger drive with permanent motor (with torque limitation in the upper speed range). The screw drive is adjustable on the monitor screen. For independent and parallel plasticization when opening and closing the mold, a screw drive with an electric motor or a second pump unit is used Single pneumatic valve on movable mold mou ...
Stork S6600-5650 injection molding machine Year of production: 2011 Total installed power: 90 kW Max. injection speed: 500 mm / s Max. injection pressure: 1650 bar Screw diameter: Ã84 mm Max. shot weight for PP: 2042 g Mold closing force: 6600kN Clearance between H x V columns (â x â): 900 x 900 mm Mold height min: 300 mm Max. mold height: 900 mm Max. mold opening stroke: 940 mm Max. ejector pin height: 680 mm Centering rings diameter: 200 mm Max. ejector stroke: 300 mm Dimensions of the mold mounting plates H x V: 1370 x 1370 mm Aggregate volume: 4527g The diameter of the hole in the mouthpiece: Ã 8 mm The injection molding machine in good condition is constantly used in current production, it is possible to see it on site or send a movie with an example of operation.
Krauss Maffei KM 300 – 1900 C2 injection molding machine Year of manufacture -2000 Control : MC4 Closing unit Clamping force: 3000 kN Mold opening force, max.: 160 kN Sliding force of the moving plate Opening: 86 kN Sliding force of the moving plate Closing: 68 kN Mold plate size (h x v): 995 mm x 1050 mm Distance between columns (h x v): 630 mm x 630 mm Mold opening stroke: 820 mm Min. mold height: 330 mm mold height: 1150 mm Hydraulic ejector - stroke: 200 mm Forward/reverse ejection force: 58/28 kN injection unit Screw diameter: 70mm Ls/D ratio: 20 Injection pressure: 1778 bar Displacement: 1047 cc Shot weight, PS: 953 g Injection speed: 400cc/sec Screw speed: 218 1/min Plasticizing capacity max.: 75 g/s Nozzle pressure: 110 kN Electrical and hydraulic equipment Pump motor nominal capacity: 55 kW Installed heating power: 30 kW Adjustable barrel heating zo ...
-KM 110-380 CX PVC - Mold clamping force: 1100 kN - Mold opening force: 70 kN - Mounting plate dimensions (H x W): 745 x 770 mm - Clearance between columns (H x W): 470 x 470 mm - Mold opening stroke: 600 mm - Minimum mold height: 300 mm - Opening width: 900 mm - Ejector stroke: mm 150 - Ejector force forward / backward: 22.6 / 9.8 kN Injection unit - Screw diameter: 35 mm - Ls / D ratio: - 22.9 - Injection pressure: 2429 bar - Injection volume: cm3 154 - Injection weight 1): 140 g - Injection capacity: cm3 / s - Screw rotation speed, standard speed 390 - Plasticizing capacity 1): - with standard screw speed: g / s 22.1 Electrical and hydraulic equipment - Pump motor rated power: kW 19 - Installed heater power: kW 10.9 - Number of cylinder heating zones: - 5 - Dry cycle time / stroke according to Euromap 6 2): s / mm 2.1 / 329 - Oil tank capacity: dm3 489 Dimensi ...
Krauss Maffei KM 250-1400 C2 Injection molding machine Year of production - 2006 Fully hydraulic locking system. MC 4 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 60 mm, with back-lock and open nozzle Nozzle radius 15mm, nozzle opening 6mm. TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Closing unit - Mold clamping force: 2500 kN - Mold opening force: 160 kN - Movement force of the movable plate clamping the mold - - - opening: kN 86 - closing: 68 kN - Mounting plate dimensions (h x v): mm 995 x 1050 - Clearance between columns (h x v): mm 630 x 630 - Mold opening stroke: mm 820 - Minimum mold height: mm 330 - Opening width: mm 1150 - Ejector stroke: mm 200 - Ejector force: 58/28 kN Injection unit - Screw diameter: mm 60 - Injec ...
Krauss Maffei KM 110-520 C1 injection molding machine Year of production - 2004 Fully hydraulic locking system. MC4 control system with color monitor, integrated control panel and built-in disk drive Plasticizing system 1 complete plasticizing system for thermoplastics, abrasive version, 45 mm screw diameter, with backlatch and open nozzle TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Closing unit: - Mold closing force: 1100 kN - Mold opening force: 70 kN - Movement force of the movable plate clamping the mold - - - opening: 35 kN - closing: kN 28 - Mounting plate dimensions (h x v): mm 745 x 770 - Clearance between columns (h x v): mm 470 x 470 - Way of opening the mold: mm 600 - Mold development height: mm 300 - Opening width: mm 900 - Ejector stroke: mm 150 - Ejector force: 22/10 kN Injection unit: - Screw diameter: mm 45 - Injection pressure: 1878 bar - In ...
UNDER NEGOTIATION HUSKY GL300 System 48mm +3025 +Edible Oil 32mm + 2921 molds OPPORTUNITY HUSKY GL300 YEAR 1998 MOLDS + 48mm water neck finish 32 cavity complete mold (hot runner) with 2 sets of core (81gr~85gr~91gr.) + 30/25 water neck finish 48 cavity complete mold (hot runner) with 1 core set (16~18.2 gr) + 32mm edible oil (snap on)(wide edible oil) neck finish cold half mold with core set (24~27gr.) + 29/21 edible oil 25 gr neck finish preform change over kit. Auxiliaries: Piovan mold dehumidifier, resin dryer with hopper, and T conveyor 400v 50hz Condition: Fair condition, connected (can be inspected) More pictures upon request USA Line: +1 305 831 8888 whatsapp +5491157143569 j.plaul@optimisense
Injection molding machine efficient in operation, connected to the media, giving the opportunity to check the operation of all functions, as well as start production to verify the condition of the injection molding machine. In the years 2010-2018, the injection molding machine was equipped with a three-axis Wittmann W711 ROBOT, so the injection molding machine is 100% configured and prepared to work with a ROBOT Additional information: The Procan CT software in English or German is equipped with advanced functions for monitoring the injection process as well as monitoring all functions of the injection molding machine equipment Touch screen + quick access keypad. Interface has a built-in memory for saving programs without the need to read data from a 3.5 floppy disk. Floppy disk drive: 3.5 allows data transfer in both directions ATTENTION The injection mold and the mold mounting ...
