mold sidel used for sale

Mol D'art Heating cabinet Model: MD60 Serial: 6 Heating cabinet, variable temp control, three shelves, internal dimensions 1450mm x 600mm x 900mm, 1Ph

Stirred boiler / silo tank van der Molen 05-031/01, built 2006, in good used condition. Completely made of stainless steel, 2850 litres capacity, double-walled, heatable (steam), filling from above or with external pump from below possible. Dimensions B/T/H 190/160/420. Operating voltage 400 volts. More on request.

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

Molteni Pearl Mill MS.15 Explosion protected version Grinding tank 15 l Double jacket Power 17,5 kW Very good operational condition, directly from production!

Manufacturer: Moldow, Type: SA, Control: yes, Year: 1992, Volume flow rate m³/h: ca. 75.000, Filter surface in m²: 690, Qty. filter hoses: 400, Hose diameter in mm!: 220, Length of filter tubes: 2500, Number of filter filter gallerys: 11, Number of fans: 4, 2nd Exhaust fan kW: 22, 3rd Exhaust fan kW: 37, 4th Exhaust fan kW: 15, 5th extractor fan kW: 22, Year :1992

Description mold control unit: 12 zones microcontroller: Tempmaster M2 HRC-MTS output voltage: 230 V temperature range: 0-350 ° C complete with thermocouple cables and 5mt resistance cables

Hot runner controller - Mold Masters M2XS-24 Year of Make: 2016 Description: 24 hot zones with cabling All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Mold Masters M1-24-24 / Like new Year of Make: 2019 Description: 24 hot zones with cabling All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Mold Masters M1-24-24 Year of Make: 2016 Location: Lodz, Poland Description: 24 hot zones with cabling All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

General SKU248T594 MakeMolteni LocationBarneveld TypeI 300 Main Features MaterialMild steel Volume250 Ltr. Motor7.5 KW Specified Features - Planetary mixer Planetary mixercheck Motorcheck 7.5 kW, 380 Volt (Ciem) With variable speed drivecheck Speed scraper1450-950 rpm With pancheck (2x) Capacity250 Ltr. Pan sizesdia. 700x680 mm MaterialStainless steel Information No.25-12 Year of construction1968 Floor space1,6x1 m Total height1,6 m Weight1500 kgPlanetary mixersMolteniMixers > Planetary mixersBrand > Molteni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Number of Spindles 8 Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Pellet Die Diameter 500mm-1550mm B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Gun Drill Speed Range 0-14,000 RPM       The LD8-150 Pellet Die is a multi-spindle gun drilling machine from Mollart’s line of deep hole drilling machines that provides accurately drilled holes for pellet dies up to 1550mm in diameter.  The LD8-150 is an eight spindle (also available in four spindle) deep hole drilling machine for designed for accurately drilling thousands of holes in to pellet dies. The drilling spindles are arranged radially around the work spindle to provide simultaneous drilling on all sides of the die for maximum efficiency. The machine can be outfitted with various workholding options for securing the pellet ...

General SKULX002 MakeMolteni LocationNetherlands TypeMH/CC.1500 SV Main Features MaterialMild steel Volume1500 Ltr. Motor90 KW Specified Features - Dissolver Dissolvercheck Double shaftcheck With covercheck With scrapercheck Hydraulic drivecheck With hydraulic unitcheck Motor90kW With pans2x Capacity1500l Pan sizesDia. 1295 mm With jacketcheck 1 vessel is with jacket With hydraulic liftingcheck MaterialMild steel Information No.4-1 Year of construction1986 With switchgearcheck (as is) Floorspace2,5x1,5 m Total height4 m Weight5200 + 1400 kg Extra Specificationsthe controls of this machine were recently renewed Linde hydraulic unit with motor, 90 Kw, 1480 rpm, 380 volt with two vessels: - Silver one: Outer diameter top flange : 1355 mm Inside diameter 1295 mm Wall thickness 8 mm  : - Green one: Outer diameter top flange : 1355 mm Inside diameter 1295 mm W ...

MOLINARI GRANULATOR, High thickness structure in electro-welded carbon steel, Loading hopper, Grinding chamber 3,6 To, extra strong knives, still knives can be axially adjusted ., hydraulic cylinder to change the screen, 1.200 mm. wide rotor,, rotor diameter 600 mm, V-belts transmission, n.66 knives, staggered cutting, 75 kw drive 527 rpm, 18 mm screen + spare 16 mm one more on request, excellent cooling system on the whole machine, total weight : 6 To, machine reconditioned, presently connected and running, Complete with loading belt LxW :9 x 1 mt.+ extraction blower + filtration system., installed power - used power in work: about 60-65% : 75 kw, availability: immediate, working width: 1.200 mm., conditions: reconditioned , type: excellent Italian brand

General SKU204N022 LocationBarneveld MakeMolteni srl TypePFF 10 ES SV No.1 Material Pan materialStainless steel Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume75 Ltr. Motor5.5 KW Specified Features - Planetary mixer MaterialStainless steel Planetary mixercheck 2 Mixing/kneading shaftscheck With scrapercheck Hydraulic drive2x Bucher ASM25 Motor5,5 kW (380 V, 1450 rpm) With variable speed drivecheck Speed mixing/kneading armsbottom 0-370 rpm, midde 0-300 rpm. Speed scraper0-50 rpm. With covercheck With pan 2 Capacity15 l & 75 l Pan sizesdia. 300 mm x 210 mm / 440 mm x 520 mm Outlet+/- 40 mm With jacketcheck With hydraulic liftingcheck Information Year of construction1990 With switchgearcheck Floor space2,0 x 0,5 m Total height2,1 m Weight1350 kgP ...

General SKU245W307 MakeMolteni TypeOHN RP SV No.18/3 Year of construction1991 LocationBarneveld Main Features MaterialStainless steel Volume1000 Ltr. Motor55 KW Specified Features - Dissolver Dissolvercheck Shaft length830 mm Disc diameter400 mm Between shaft and frame800 mm With covercheck Motor55 kW, 380 volt, 1470 rpm Speed mixing shaft18 rpm ? With panscheck Capacity1000 ltr Pan sizes1200x1050 mm Outlet80 mm With hydraulic liftingcheck MaterialStainless steel Information With switchgearcheck(as is) Floorspace1,20x2,00 m Total height2,90 m Weight5000 kg ATEX compatiblecheck Extra Specificationsthis machine was originally designed to work under vacuum. however, the machine was never used in this way. so the machine is sold as an atmospheric working machine.Catalysts & fillersDissolversSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther fee ...

General SKU253N189 LocationBarneveld MakeMolteni Officine Mecc. Milano TypeTM 600 No.33-18 Main Features MaterialMild steel Motor15 KW Specified Features - Dissolver Dissolvercheck Shaft length700 mm Disc diameter250 mm With covercheck Manhole700 x 250 mm With scrapercheck Motor15 KW, 400 Volt With variable speed drivecheck With hydraulic liftingcheck Motor1 KW, 220/380 Volt MaterialMild steel Information Year of construction1971 Floorspace2,2 x 1,0 M Total height2,1 M Weight1520 KGCatalysts & fillersDissolversSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatMolteniIndustries > Chemical > Catalysts & fillersMixers > DissolversIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceut ...

General SKU002H003 MakeMolteni Milano TypeTM 5 - SV No.26-5 Year of construction1979 LocationBarneveld Main Features MaterialStainless steel Volume5 Ltr. Motor0.95 KW Specified Features - Dissolver MaterialStainless steel 1.4301 (304) Dissolvercheck Shaft length200 mm Disc diameter80 mm Motor0,80/0,95 kW, 380 Volt (Ex) With variable speed drivecheck Speed mixing shaft± 400-2400 rpm: without mixing pan With mechanical liftingcheck Information With switchcheck Floorspace0,8 x 0,6 m Total height1,0 m Weight140 kg ATEX compatiblecheck Extra SpecificationsRECONDITIONEDCatalysts & fillersDissolversSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalReconditionedFine chemicalsOintmentsPaints & coatingsOils & fatMolteniIndustries > Chemical > Catalysts & fillersMixers > DissolversIndustries > Chemical ...

Complete dairy - Plate heat exchanger / milk heater from API Schmidt boards automatic heating system including documentation and temperature recording - 3 x tank storage 1000 l. each with agitator (insulated) - CIP cleaning system 3 x stainless steel container (500 l.) with direct steam injection - Process tank 160 Ltr. Content

Continuous drying tunnel

Continuous tunnel

freestanding

Sugar dissolving station Type Pulsmaster PI 7/7/10 Capacity: Contimol 6.000l/h

The CONTIMOL is the continuous sugar dissolver to produce sugar syrup (simple syrup) with constant quality and concentration. The unit can be customized to individual needs regarding potential product output and based on usage and availability of energy. Module Features • High degree of automation • Jet-Mix-System • Short start-up phase • Existing CIP integration • Manufactured using high quality material The unit includes: -Mixing station on the frame; -Control cabinet; -Power cabinet; -Vertical bunker for sugar 5.000l. with scales; -A set of augers for feeding sugar into the dissolving unit;

Key data: 273 m², 5000 kg, 7300 mm

Volume flow 25,000 m3/h Exhaust fans 2x

for overhauling all types of shoes, tools incl.

with water filter (collection basin)

for application adhesive for sole production

Damping tunnel for inserted/pinched shafts

1) Vertical Rubber Molding Machine - Manufacturer: Rutil - Model: 2000/250 RS SX-F - Stations: 1 - Clamping Force: 500 Ton - Heating Platens Dimensions: 520x650 mm - Max Shot Volume: 2000 cc - Max Daylight: 450 mm - Minimal Mould Height: 100 mm 2) Vertical Rubber Molding Machine - Manufacturer: Rutil - Model: MP3 700/150 - Stations: 3 - Clamping Force: 150 Ton - Heating Platens Dimensions: 420x500 mm - Max Shot Volume: 700 cc - Max Daylight: 400 mm - Minimal Mould Height: 140 mm 3) Vertical Rubber Molding Machine - Manufacturer: Rutil - Model: 680/150 RS - Stations: 1 - Clamping Force: 150 Ton - Heating Platens Dimensions: 430x500 mm - Max Shot Volume: 680 cc - Max Daylight: 400 mm - Minimal Mould Height: 70 mm 4) Vertical Rubber Molding Machine - Manufacturer: Rutil - Model: 680/150 RS - Stations: 1 - Clamping Force: 150 Ton - Heating Platens Dimensions: 430x500 mm - Max Shot Vol ...

Lid Mold Manufactured by TERMOSTAMPI to fit Drinking Cups Ø98 mm, Age 2022, Forming mold 24 cavities (6 x 4 arrangement), 2 sets of inserts for:, Dome Lid For Cup Ø9 8mm ., Flat Lid For Cup Ø 98mm, Hole Punch Mold - Punch and Die., 24 cavities to Punch 24 holes diam.25 mm on Dome Lid., 24 cavities to Punch 24 cross cut., Steel Rule Pucning Mold :, with 24 cavities for both Dome and Flat Lid., Stacking Device:, for Domes and Flat Lids

ILLIG RDM 70K PP/ PS Cup Mold, manufactured by Marbach, 77 mm cut dia., 14-Cavity Inclusive of stacker Parts

ILLIG RDM70Kb Mold for PP Cups, Ø73 mm 32 Cavities, complete with Stacker Basket with Rods & Brushes & Rake, age May, 1997., Manufacturer: MARBACH

ILLIG RDM70K Mold, dia. Ø70 mm, for PP Cups, 21 Cavities, age 1995, with 1 set of inserts and Stacker basket with Rods with Brushes.

PP-Drinking Cup Mold for ILLIG RDM75Kc, manufactured by TERMOSTAMPI, age 2022 with Inmold Forming and Trimmimg, for PP-Cups Ø98 mm dia. for the ILLIG RDM 75Kc, consists of:, 24 cavities (6 x 4 arrangement), complete with Trimming Knives, Cavity Inserts, Ejectors, Down Holders., and 4 series of inserts for the following PP drinking cups:-, 24 oz, 20 oz, 16 oz, 12/ 14 oz, Complete with Stacker Parts for the ILLIG PH75 counter/ stacker

ILLIG RDM70K Mold for Ø75 mm dia. PS Cups, 21-Cavities, with 1 set of inserts, no Stacking Basket, age 1995. missing engraved Cup bottom discs, as these are the intellectual property of the previous owner. Very sparingly used !

Key data: 20000 kN, 135 mm

Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...

Concerns combination lot of lot numbers: 256 to 264 ! A total of 23 molds in which 71 blocks can be produced. Lot 258: Concrete mould clamp lot 259: Concerns 6 concrete block molds for \"lego\" blocks 160x80x80 cm, 3 pieces per mold. Lot 260: Concerns 6 concrete block molds for \"lego\" blocks 160x80x80 cm, 3 pieces per mold. Lot 261: Concerns 4 concrete block molds for \"lego\" blocks 160x80x40 cm, 3 pieces per mold. lot 262: Concerns 5 concrete block molds for \"lego\" blocks 160x80x80 cm, 3 pieces per mold. Lot 263: Concerns 1 concrete block mold for \"lego\" blocks 160x80x40 cm, 4 pieces per mold. Includes steel underlay! Lot 264: Concerns 1 concrete block mold for \"lego\" blocks 160x80x80 cm, 4 pieces per mold. Includes steel underlay! Auction-ID: A1-40134-265

Manufacturer: Demag Model: EL-EXIS S 250/630-1450 Year of Manufacture: 2005 Clamping Unit - Clamping force: 2500 kN - Clamping holding force: 2750 kN - Opening stroke max.: 675 mm - Mold installation height min.: 330 mm - Mold installation height max.: 710 mm (830 mm with extended configuration) - Max. distance between mold clamping platens: 1385 mm (1505 mm with extended configuration) - Mold clamping platens (H x V): 950 x 950 mm - Clear tie-bar spacing (H x V): 630 x 630 mm - Mold weight max.: 3300 kg - Max. weight portion on moving mold clamping platen: 2200 kg Hydraulic Ejector - Ejector stroke: 200 mm - - Ejector force: 69 kN - - Ejector retraction force: 31 kN Find more here - / Contact us at -

Set of blow molds for PET blowing machine Sidel SBO Universal - 10 molds HR for heat resistent bottle 1.0 litre - 10 molds for standard bottle1.0 litre Molds were used to produce PET bottles for juices Low working hours Molds are n very good condition Available immediately Can be customised

On behalf of our client, we are selling this KHS Blomax 16 PET blow molding machine which is designed for the automated production of PET bottles. It ran together with 2x KHS Absofill / ABF 710 machines before (one of these 2 we are also selling on our , .hamburg-machinery/listings/7469327-used-aseptic-pet-bottle-filling-ma chine-khs-innosept-absofill-abf-710-03). It is dismantled ± 8 years ago and is stored since in a closed warehouse. The client bought the machine used and decided not to blow bottles themselve, but buy them from another supplier, already blown. This bottle blower is direct available. Loading on the truck / inside the container will be done by the dairy factory., The machine was used to blow PET bottle for a fruit juice factory in Germany. Capacity: 28.800 bottles/h. Bottle size: min. 200 ml and max. 2.000 ml. Current bottle neck nominal diameter: 38 mm. With the same  ...

Key data: 1500 kN

Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Molding Machine with the Rotary Molding Machine Year of Make: 2015 Injection unit: Screw diameter: 35 mm Injection weight: 175.6 g Spray pressure: 2743 bar Dosing volume: 193 cc Clamping unit: Clamping force: 150 t Spar spacing: 0x0 mm Size of the clamping plates: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 Additional equipment: Vertical Injection Molding Machine with the Rotary Molding Machine Hybrid machine: high-speed, energy-saving and very quiet Air Valve x 5 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Rotary table diameter: 1500 mm Rotary table driven by a servo motor, controlled by an inverter Dimensions: Weight: 11300 kg Length/Width/Height: 3.83x1.50x4.07 m All offered machines ...

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...

Catalog No. : 7418 Type: Concept 420/810-2300 Producer: Demag Made in: 2006 Characteristic: Clamping force: 420 t Closing force: 4200 kN Screw diameter: 70 mm Injection capacity: 891 cm³ Injection weight: 800 g Height of the plate for mounting the mold: 1200 mm Width of the plate for mounting the mold: 1100 mm Distance between the columns (horizontal): 800 mm Distance between the columns (vertical): 710 mm Maximum injection pressure: 1877 bar Mold height: 820 mm Machine length: 7800 mm Machine width: 2200 mm Machine height: 2400 mm Weight of the injection molding machine: 20000 kg

Offered are 2 identical horizontally operating hydraulic injection molding machines from ARBURG. Clamping force: 700kN, opening stroke: 250mm, mold installation height: 200-430mm, mold mounting plates X/Y: 476mm/476mm, movable mold half maximum weight: 250kg, screw diameter: 20/25/30mm, injection pressure: 2250/2240/1550bar, horizontal injection position: max. 120mm, weight: 2090kg, machine dimensions X/Y/Z: approx. 3500mm/1900mm/1950mm. Documentation vorhanden, viewing possible by arrangement.

An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible.

Injection molding cutting device for injection molding machine, injection molding machine, cutting pliers -Cutting device: for cutting plastic sprues, tabs, overflow cavities, webs, etc. -6 Cutting pliers: Cutting insert/individual components see photos -Price: complete -Total dimensions 1570/770/H680 mm -Weight: 49 kg

Key data: 6 kN, 2582 g/PS, 90 mm

Tederic NEO H680-i4800 – Two-platen injection molding machine Exhibition piece with minimal operating hours – excellently equipped! This machine is a former pilot plant and demonstration device that was used exclusively for demonstration and test purposes. Accordingly, the The machine has hardly any operating hours and is in excellent condition. The extensive equipment goes far beyond the standard. --- Technical data - Clamping force: 680 t (6,669 kN) - Year of construction: 2022 - Injection unit: i4800 - Screw diameter: 90 mm - Injection weight (hp): 2,582 g - Injection volume: 2,837 cc - Spec. Spray pressure: 1,615 bar - L/D Ratio: 20.8 - Clamping plates: 1,500 x 1,400 mm - Handlebar spacing: 1,100 x 960 mm - Ejector force: 182 kN - Tool installation height: 450 mm - Opening travel: 1,400 mm - Max. panel spacing: 1,850 mm - Ejector trave ...

Injection Mold Type: Plastic injection mold Year of build: 2022 Mold Features High durability tool steel construction Reinforced cavity design for large part molding Multi-point injection to ensure uniform filling Optimized cooling system to reduce cycle time Robust ejection system for large plastic parts Designed for high-volume industrial production Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-71

Ersatzteile für Spritzgießmaschinen Arburg, Demag, Krauss Maffei, Battenfeld, Ferromatik, Boy, Engel Die Teile sind 100 % original und funktionsfähig und vor allem deutlich günstiger als Neuteile Wegaufnehmer für Spritzgießmaschinen Position sensors for injection molding machines Scales Position Sensors for Injection Molding Machines Novotechnik LWH 100 100 mm Novotechnik LWH 127 127 mm Novotechnik LWH 130 130 mm Novotechnik LWH 150 150 mm Novotechnik LWH 151 151 mm Novotechnik LWH 225 225 mm Novotechnik LWH 300 300 mm Novotechnik LWH 353 353 mm Novotechnik LWH 360 360 mm Novotechnik LWH 450 450 mm Novotechnik LWH 452 452 mm Novotechnik LWH 500 500 mm Novotechnik LWH 500 500 mm Novotechnik LWH 503 503 mm Novotechnik LWH 600 600 mm Novotechnik LWH 75 75 mm Novotechnik LWH 900 900 mm Novotechnik TL 225 225 mm Novote ...