mod 72 used for sale

Item condition: New. Machine is delivered pre-assembled and tested. Specifications / Technical Data S-720 CNC-Fraesmaschine Engravings of all kinds, even on glass, VHM, carbide and up to 62 RC hard steel ! With the High-Z CNC-Fraes.- and Engraving Machine they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are pr ...

Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emergency stop you find ...

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in german TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the indus ...

Type: 9T S2/E2 SENSITIVE Model: A-720 Machine capacity: 135 bottles per minute

The universal rotary machine for top flexibility in self-adhesive labelling. The Pago System 630 is based on a sturdy rotary machine and the powerful Pagomat 6 series labelling heads. The system is designed for self-adhesive labelling of all kinds of products and for applications in every industry. labeler PAGO SYSTEM 630M producer: PAGO TYPE: 720.12T.S2.E2 Year: 2003

Attachment: eccentric screw pump Manufacturer: Allweiler Type: SLBP 720-1 Machine number: 7640010 Year of construction: 1989 Power: 67-484 l / min Speed gear: 50-280 RPM. Engine: Bauknecht Power: 5.5 kW, 380 V Speed: 1440 RPM Connection suction side: DN 100 Port side: DN 100 Length: 1800 mm Condition: used, ready

- double-sided bubbling machine Metabo 7445 - Metabo 72730 - 4 kW - shaft diameter 35 mm - 1500 min-1; ready for use

- double sided brishing / deburring machine Metabo 7445 / Metabo 72730 - 4 kW - shaft diam. 35 mm - 1500 rpm; ready for operation

Qty. 1 Second-hand continuous galvanising line Mfc.: POSCO Built: 1997 Capacity: approx. 100 000 per annum Strip width: 720 – 1250 mm Thickness: 0.2 – 1.6 mm De-Coiler ID 508 mm OD 2000 mm Weight: 20 Tons Finished product: Coil Strip width: 720-1250 mm Thickness: 0.2-1.6 mm ID 508 mm OD 1600 mm Weight: 10 Tons Sheet Strip width: 720-1250 mm Thickness: 0.2-1.6 mm Weight: 3 Tons Line speed Entry section: max. 150 m/min. Process section: max. 120 m/min. Exit section: Coiling max. 150 m/min. Shearing max. 100 m/min. Threading speed: 20 m/min. Coating method Both sides coating, Regular spangle Coating weight 120-500 g/m² based on both sides Post treatment Chromating Electricity High voltage 10 kV Low voltage 380 V AC, 3 ph., 50 Hz, 220 V AC, 1 ph. Water Pressure min. 3 kg/cm² Steam Pressure min. 5 kg/cm² Temperature min. 158 °C Production process Coil s ...

Transmission used, overhauled Ship boat reversing gearbox Delivery in possible exchange / reverse gear on exchange basis Various types and ratios available AS 71C; AS 72C; AS 73C; 10-17-000-001; AS1-71C; 10-17-000-002; AS1-71CR; 10-17-000-003; AS1-71CB; 10-17-000-004; AS1-71CBR; 10-17-000-005; AS2-71C; 10-17-000-006; AS2-71CR; 10-17-000-007; AS7-71C; 10-17-000-008; AS7-71CR; 10-17-000-009; AS3-71C; 10-17-000-010; AS3-71CR; 10-17-000-011; AS14-71C; 10-17-000-012; AS14-71CR various versions in stock

x/y/z = 500/360/400 mm, max. 4000 rpm, 4 clamping corner, 1 pushbutton, various shots, cabinet Lista

DEAR'S SALE, STD CRANKSAFT ABC 6DXC-720-100A Good condition, report... Liner, Conrod, piston etc.. main parts Brgds Hakan KUSCU +905323642509 info@kscege.com

HWS 720 K Tilting circular saws Electric motor with direct drive Saw blade diameter: 700 mm Speed: 1400 1/min 400V 50 Hz Working height: 850-1150 mm Rocker pad: 735 mm Dimensions: 1270 x 730 x 1130 mm Weight: 100kg G & PIECES 5965721

Three-point wood chipper, drive PTO 540 – 1,000 rpm, 4-blade chipping disc, feed up to 160 mm, Chip length 15-50 mm, power requirement 18-60 kw. Machine weight approx. 600 kg. Oil motors for wood feed leaking, one flap on the feed funnel loose, no feed electronics installed, electrical emergency stop available. Other wood chippers available - also motorized machines. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for facility and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping work and disposal, environmental care, engines and more...

Gluing and Milling Line Manufactured by FISHER+RÜCKLE Model: EFA-28 Cross-feed Splicer Manufactured by FISHER+RÜCKLE Model: FL-728

TO WHOM IT MAY CONCERN; WE VE 6 PCS USED WOODWARD 721 DIGITAL SPEED CONTROL AT OUR STOCK. WE DISMANTLED THOSE CARDS FROM RUNNING SYSTEM. PLS FIND DETAIL ON BELOW PART NO 8280 - 303 PART NO 9987 - 206 CTRL ASSY 8237 - 951 REV. E CTRL ASSY 8237 - 735 REV. G ALL PANES LOCATED IZMIR TURKEY . READY TO SHIPMENT. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba Best Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Control Board A1

The ICP-725-OES of the Agilent 700 series from Agilent Technologies delivers reliable and timely analysis results. Emission spectroscopy with inductively coupled plasma enables the simultaneous determination of major, minor and trace elements. The plasma viewed radially is vertically oriented, which makes it tolerant of complex matrices. In this way, it ensures reliable and reproducible results. A fast warm-up phase increases sample throughput and productivity. Due to its robustness, the ICP725 is ideal for applications in mining, chemical industry, salt production, wear metal analysis, petrochemical production and precious metal refining. The ICP is sold with the following accessories: • Autosampler: SPS3 (S/N: AY1103M057) with associated housing • Refrigerated mobile Minore II VS – R101-19 (S/N: SZ 1337 11) • PC and ICP-Expert II software • 2 x SPS3 probe 1.0 mm id i ...

TO WHOM IT MAY CONCERN; WE VE 1 PCS NEW & UNUSED WOODWARD 723 PLUS DIGITAL SPEED CONTROL AT OUR STOCK. WE VE ALSO 9 PCS USED 723 PLUS AT OUR STOCK . WE DISMANTLED THOSE CARDS FROM RUNNING SYSTEM. PLS FIND DETAIL NEW PART NO 8280 -488 REV D CTRL ASSY 9906-619. REV G USED PART NO 8280 - 5010 PAAE034117 REVISION NEW 2PCS ( WARTSILA W9L 20 ) PART NO 9906 - 619 REVISION NEW 6PCS PART NO 8280 - 336 1PCS ALL PANELS LOCATED IZMIR TURKEY . READY TO SHIPMENT. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba Best Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

1. Qty. 1 Second-hand labeller Mfc.: Krones Type: Universella 723-931 Built: 1993 15 labelling stations Number of labels: 8 labels per bottle Number of grippers in the cylinder: 6 Capacity: 18 000 Btl./h Size of bottles: 0.5, 0.7, 0.75 & 1.0 Ltr.

2. Qty. 1 Second-hand labeller Mfc.: Krones Type: Universella 723-844 Built: 1991 10 labelling stations Number of labels: 4 labels per bottle Capacity: 12 000 Btl./h Size of bottles: 0.5, 0.7, 0.75 & 1.0 Ltr. 2 glue stations

length: 720 mm width: 500 mm height: 600 mm weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1200x640x600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 15 mm length: 800 mm = bar loading and de-loading magazine for bars up to 15 mmø, bar length 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 720 mm width: 500 mm height: 700 mm weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1200x640x700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Part Number 6338 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 160mm 5,5kW 3) vertical left 160mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 7,5kW 6) horizontal bottom 230mm 7,5kW 7) universal 360° 230mm 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - all spindles equipped with a brake - spindle speed 6000rpm in advance: - 6 pulling, toothed, metal introductory shafts, including 2 double - 4 pulling shafts, rubber including 1 double - 3 clamps on the lead bottom: - pressure from the side on the inlet - introductory shaft, toothed, pulling, swivel in the lower table top - 3 pull rollers, metal, smooth - pneumatically adjustable shafts - length of the introductory table top 1190mm - central lubricati ...

Labeler, make Krones, type: Prontomatic 720-21-8-8-110 RM, for 0,7 lt GdB bottle, for 24.000 bph, for body-, shoulder- and back label, right -> left counter clockwise, with 2 heated glue pumps, built 1997

Key data: 3200 mm, 287 , 50

Screw diameter: 50 mm Injection weight in polystyrene: 287 g Clamping force: 3200 kN Screw diameter: 35 or 50 mm Stroke volume: 141 /314 cm³ Injection weight in polystyrene: 154 / 287 g/hp Injection pressure: 2,500/1280 bar Clamping force: 320 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 300 mm Opening distance: 600 mm Microprocessor control: Selogica direct Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.5 x 2.1 x 2.2 m Payment terms: 100 % before taking over the machine, net only

CATALOG NO. 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of the shredded material 160mm - roller width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - 25mm sieve dimensions - pressing roller at the input 0.75 kW - toothed shaft pulling from the bottom 1.8 kW - toothed shaft pulling from above 1.8 kW - length of the vibrochute 4470mm - width of vibrochute 710mm - 2.2 kW vibrating motor - main engine 55kW - autoreverse - diameter of the extraction spigot 260mm - dimensions of the vibro-chute length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight about 5500 kg – German production - very low mileage – original documentation – used chipper, very good / perfect condition Net price: PLN 169900 Net price: 36538EUR Net price calculated according t ...

Mayr EAS overload clutch with sprocket 12 B1 Z 23 Bore ø 30 Height 64 No. 2/490.720.0SX0911968 160-400 Nm

Transnorm Rising falling Incline belt conveyor GF 7200-600-500 RA2053 Technical data: Conveyor length (NL): 7200 mm (3800 mm + 3400 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7200 Nominal / outsid ...

Kersting plastic chain conveyor belt conveyor conveyor Inclined conveyor washing GF 3350-720-620 RA1974 Technical data: Conveying length (NL): 3350 mm Framework width (NB): 720 mm belt width (GuB): 620 mm Height/band run (BH): from 920 mm to 1250 mm rising +/- 50 mm height adjustment Conveying speed (v m/s): pleas contact us with you needed Speed Drive: DEW- Gearmotor Electrical data: 400 V / 50 Hz / 0,37 kW Belt: plastic chain with toothwheel drive Year of construction: 2013 Special feature / accessories: Drip tray to catch the washing water All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2013 condition: good (used) Conveying length in mm: 3350 Nominal / outside width in mm: 720 Belt width in mm: 620 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 scope of delivery: including supports and side guides For indivi ...

MADO MEW 725 automatic grinder, including lifting device, two feeding worms, one working worm, cutting set Unger 5 pcs., including key for the removal of the working worm

Electric chain hoist, crane, indoor crane, assembly crane, electric lift, chain bag chain hoist -Chain bag: for crane chain hoist -Dimensions: 720/300/280 mm -Weight: 6.3 kg

Transnorm Rising falling Incline with arch belt conveyor GF 7200+700-700-600 RA2201 Technical data: Conveyor length (NL): 7900 mm ( 7200 mm incline + 700 mm arch ) frame width (NB): 700 mm, 8000 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 7900 ( 7200 + 700 ) Nominal / outside width in ...

CATALOG NO. 7220 TECHNICAL DATA - min – max width of the processed element 20 – 230mm - min – max height of the processed element 8 – 160mm 7 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) vertical left 160mm 5.5kW 6) horizontal top 230mm 7.5kW 7) horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 10 pulling, toothed and metal input rollers, including 2 double rollers - 3 side pressures from down: - pressure from the side at the insertion - input shaft, toothed, pulling, turning in the lower tabletop - 2 pressure points from the side - grooved top - drawing roller, metal, grooved - drawing roller, metal, smooth - pneumatically adjustable rollers - length of the introductory tab ...

Inv. Num. : 7298 In good technical condition.

Lippert rising falling Incline belt conveyor GF 720+11450+850-750-600 RA2263 Technical data: Conveyor length (NL): 13020 mm ( 850 mm forerun + 11450 mm ascending belt + 720 mm top bend ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1992 condition: good (used) Conveying length in mm: 13020 ( 850 + 11450 + 720 ) Nominal / outside width in mm: 750 Belt w ...

Gate valve with flange connection, butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve - Manufacturer: Valpres -Type: 72000007 -Size: DN32 PN40 -Price: per piece -Number: 3 piece -Dimensions: 155/250/50 mm -Weight: 4.3 kg/piece

Workbench, work table, assembly bench -with: bench vice and 2 side tables -Workbench: 2045/720 mm, total height: 1100 mm -Vice: 380/150/H140 mm -Jaws: 115 x 20 mm, clamping width: 185 mm -Side tables: 500/500/H860 mm -Weight: 164 kg

Gearboxes, stin gearboxes, angular gearboxes, transmission gearboxes, crane gearboxes -Ratio: 16.29: 1 -Hollow shaft: Ø 80 x 310 mm -Hole circle: Ø 300/ M16 -Price: per piece -Number: 2 pieces -Dimensions: 700/540/H405 mm -Weight: 282 kg/piece

Screening drums suitable for all common screening machines such as Doppstadt SM 314 / SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus , Cribus , Pronar , Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - offset or straight - smallest webs - welded-in spiral - in various material thicknesses - Perforated plates sharp-edged in the highest quality - Perforated plates made of special steel We deliver our drums free of charge. Many models in stock without waiting.

Messer HSS für Papierschneider / paper knife HSS - guillotine Ideal 7228 / 7260 (Krug & Priester) Art.: PS4409 Ersatzteil Nr. / parts No. 9000141 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimensions: 840x100x10 mm. Number of holes M10: 6 Number of rows of holes: 2 Packaging : Disposable crate

RAFFEL NH3 – 722 m² Brand:RAFFEL Type:NH3 – 722 m² Stock number:M23-2490 Cooling capacity:120 kW Application:Freezing Number of fans:3 Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:5100 x 2260 x 5060 mm Number in stock:2 piece(s) Price:Quotation request Description: Nice Raffel Ammonia evaporator with 3 fans. Heat exchange surface is 722 m2. Visit our website: used-refrigeration

Qty. 1 Second-hand Labeling machine Mfc.: KRONES A.G. Type: Universella 723 - 0.25, 0.5, 0.7 L Built: 1993 Labeling without positioning or with side positioning. Carousel type 15 pcs. plates Gluing: label, counter label, large and small "L" type band. Several sizes of palettes. Multi-row plate conveyors feeding into and out of the labelling machine. Technical assessment: complete device, technically efficient.

Caljan telescopic roller conveyor 600-5/6.5 RA2166 Base part with 2 manualy retractable telescopic elements. The telescope can be moved in or out with a crank handle on the take-off side. Attention: ONLY for trucks loading Type: 600-5/6.5 Year of manufacture: 1998 Condition: functionally tested faultless optical: minimal traces of use fixed part with double supports: 400 mm hight Telescope elements 2 pieces: manualy retractable and extendable Telescope extension/retraction: crank handle on operator take-off side Accumulating effect: accumulating with slope Technical data: Staionary part Length: 5000, +6500 mm extention Part Roll width: 600 mm Outside width: 930 mm Height 1 transfer: 400 mm - Feeding e.g. via belt conveyor on customer side Rollers galvanized and plastic: d = 50 mm Roller pitch super narrow: RTLG = 65 mm Protective cover: bottom complete Operation/crank handle: front side  ...

Used labelling machine by Krones A. G. Herman Kronseder type Universella 723-931, new 1993. Specification: - number of discs: 15, - number of pallets in the aggregate: 8, - number of grippers in the cylinder: 6, - bander: large and small, - capacity 18,000 bottles/h, - several bottle formats, - side positioning of bottles.

Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, -Cover comes: from a WMW boring mill -for guide inside dimensions: 100 x 725 mm -Extractable: mm -Dimensions: 950/820/H150 mm -Weight: 30 kg