mobile x ray used for sale

Sensor, Probe, Immersion Probe, Float Switch, Magnetic Switch, Magnetic Float Switch -Manufacturer: KDG Mobrey, magnetic float switch ovp -Type: S179DB/F83 -Number: 5x float switches available -Price per piece -Dimensions: 405/120/H110 mm -Weight: 2.9 kg/pc.

Semi-automatic bending, pipe bending machine, mandrel bending machine MOBITEC type BAH 1-2KOTTMANN and BERGER GmbHFabr. No. 056 Year of construction 09/2004- for simultaneous bending of two pipe sections made of steel up to 12 mmBending angle max. 90Pipe diameter max. 12mmMandrel length approx. 65 mmNominal power 3.5 kWDreturn air max. 6 bar / approx. 1 litre per bending cycleMains connection 400 volts, 50 Hz- Pneumatic clamping- Pneumatic mandrel retraction- Control for angle input via STOBER Controlbox Series 4000/5000- Control SIEMENS

range L-W-H: 490x310x190 mm weight max. in kg: 20 kg Temperature range: -10° +50° °C Colour: grün RAL material: PST AU Lot storage stackable by lateral and rear tongue and groove can be connected to each other approx ca. 700 pieces in Stock Packing unit: Pallet Exception, for small quantities only if you pick them up yourself in Goldenstedt. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cable winch, hoist winch, construction winch -Mechanical winch: with planetary gear without drive -hydraulic brake -Traction force: approx. 20,000 kg -Drum: Ø 500 mm -Rope diameter: 24 mm -Rope to be wound length: 2x 28 m -Number: 2x winches available -Price: per piece -Dimensions: 1640/700/H700 mm -Weight: 1026 kg/piece

Two (2) Surplus/Never used, Mobile Substations 25/30 MVA, 115/13.8 kV. 60 Hz. 3 Phase, with ODTF1/ODAF2 cooling, YNd1 Connection, Cooper Windings, on a low bed chassis trailer, HV Surge arrester, High Capacitive Voltage transformer, 145 kV Hybrid Switchgear, Outdoor Circuit Breaker Roof Bushing, Control and Protection Panel, Battery Charger, Batteries and all the auxiliary equipment for this substation.

1 piece used FULL MOBILE CONCRETE MIXING PLANT SBM / SIMEM SMM 100 Year of construction 2007 Performance: 100 kbm/h Mixer unit Mixer SIMEM MSO 3000/2000 Additive dosing unit 2X 12.5l Cement scale 1200kg water dosing unit 600l Row silo / aggregate storage unit / compartment batcher Weighing belt 5000kg Aggregate/aggregate boxes: 4 X approx. 38.5 kbm Cement silos 4 X approx. 80 ton Fully automatic Dorner control Installed in a container Additive storage Installed in a container Location: Austria Available: IMMEDIATELY price net , ex location without guarantee and/or warranty, mistakes and/or false representations reserve, selling in current state – standing or recumbent, subject to prior sale

length: ca. 1500 mm width: ca. 700 mm height over floor: ca. 840 mm : 2 St. With 2 drawers, interior height approx. 140 mm and 2 storage compartments, door height approx. 380 mm Mobile on casters, casters can be lowered so that the table remains stable when working The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: DART Type: MOBILE 125KG Year of Make: 2007 Net weight approx. 1.1t Condition: used / in working order Chain hoist must be renewed, or replaced, as not permitted (160kg) No testing according to the UVV and DGUV! Offer will only be sent if a complete imprint is provided! Price 2.950 Euro incl. 19% VAT Location Warstein , Germany Reference number M-DAR-1026 DESCRIPTION We offer you a used travelling crane from the manufacturer Dart. Hook travel approx. 2020mm Load capacity 125kg Net weight 1.1t kg Chain hoist not suitable, because 160kg. The chain hoist must be exchanged for a 125kg for continued operation. Availability: immediately Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your comp ...

Technical data: Fruit wash, grind, pressing then the juice pasteurization and bag-in-box packaging pour performance up to 750 L/h incl. mounted hydraulic large box emptying wash grinding plant Kreuzmayr KWEM 1000 cover press Kreuzmayr KEB 500 Pasteur Kreuzmayr PA 750 oil bag-in-box fillers Kreuzmayr CBF 900, incl. 6-digit series bottling juice pump, strainer, 2 PCs. juice buffer tank 220 litre stainless steel base frame, Tandem chassis with tyres 195/50-10 plan building with gas spring lift for the two side walls, roll-over tarp back 4 PCs. crank rotating supports for the horizontal alignment of the System cleaner, air compressor and complete piping fix established

Mobile concrete batching plant, SUMAB K-60 Technical details: • 4 total storage tanks with 3.8 м3 each, with the possibility of increasing storages to 5 m3 • Pan mixer 1800/1200 litres, coated with 12 mm layer of special steel. • Automatic control for opening the damper supply for precast concrete. • 5 mixing arms. The special arrangement of the arms in the pan mixer allows all the parts of the mixer to be covered during the batch, which means that a high-quality concrete product is achieved. The K-60 Mobile concrete plant features a comfortable control cabin that allows for the automatic control of the system. The modern Siemens computer system enables you to produce over 100 recipes and types of concrete. You can print the specifications of any mix of finished batches in kilograms and percentages to prevent cement or aggregate theft while making a concrete mix. Adva ...

Mobile pneumatic agitator from PTM mechatronics for mixing and homogenizing. Technical data: Manufacturer: PTM mechatronics GmbH, Egenhofen Designation: eco-Station 30 Type: Hoist / Mobile Agitator Year of Make: 2022 Serial Number: 14521 Version: mobile Agitator drive: pneumatic Agitator drive: PTM mechatronics eco-Drive 1800 V2 Agitator speed: adjustable, display up to approx. 90 min⁻¹ Max. air supply pressure: 0.6 MPa / 6 bar Max. stroke: 500 mm Max. lifting capacity: 50 kg Air consumption hoist: 2.5 l per stroke at 0.4 MPa Max. lifting speed: 100 mm/s Stroke adjustment: pneumatic Compressed air maintenance unit with pressure regulator: available Pressure gauge: available Control Unit: Start/Stop/On-Off/Up-Down Safety device: Emergency stop Speed control: available Stirring tools: different designs as shown Chassis: 4 swivel castors, partially lockable Work ...

Mobile pneumatic agitator from PTM mechatronics for mixing and homogenizing. Technical data: Manufacturer: PTM mechatronics GmbH, Egenhofen Designation: eco-Station 30 Type: Hoist / Mobile Agitator Year of Make: 2022 Serial Number: 14521 Version: mobile Agitator drive: pneumatic Agitator drive: PTM mechatronics eco-Drive 1800 V2 Agitator speed: adjustable, display up to approx. 90 min⁻¹ Max. air supply pressure: 0.6 MPa / 6 bar Max. stroke: 500 mm Max. lifting capacity: 50 kg Air consumption hoist: 2.5 l per stroke at 0.4 MPa Max. lifting speed: 100 mm/s Stroke adjustment: pneumatic Compressed air maintenance unit with pressure regulator: available Pressure gauge: available Control Unit: Start/Stop/On-Off/Up-Down Safety device: Emergency stop Speed control: available Stirring tools: different designs as shown Chassis: 4 swivel castors, partially lockable Work ...

RAU EDP table 1023 mobile / mobile workstation trolley Mobile IT and workstation table from RAU Arbeitsplatzeinrichtungen with robust worktop made of wood-based material. Due to the working height of approx. 1,100 mm, the table is particularly suitable as a standing workstation, e.g. for PC workstations in the workshop, assembly, production, warehouse or quality assurance. Equipped with an open storage compartment, lockable base cabinet with two doors, side document storage made of metal mesh and four swivel castors for flexible use. Technical data: Manufacturer: RAU Arbeitsplatzeinrichtungen Designation: EDP table 1023 mobile Product no.: 07 1023F.11 FA number: 485388 Year of manufacture: 02/2016 Dimensions (L × W × H): 1,100 × 800 × 1,100 mm Colour: light grey / RAL 5010 gentian blue Worktop: Engineered wood Base cabinet: 2-door, lockable Storage Compartment: Open  ...

RAU EDP table 1023 mobile / mobile workstation trolley Mobile IT and workstation table from RAU Arbeitsplatzeinrichtungen with robust worktop made of wood-based material. Due to the working height of approx. 1,100 mm, the table is particularly suitable as a standing workstation, e.g. for PC workstations in the workshop, assembly, production, warehouse or quality assurance. Equipped with an open storage compartment, lockable base cabinet with two doors, side document storage made of metal mesh and four swivel castors for flexible use. Technical data: Manufacturer: RAU Arbeitsplatzeinrichtungen Designation: EDP table 1023 mobile Product no.: 40990017 F.11 FA number: 000581515 Year of construction: 09/2018 Dimensions (L × W × H): 1,100 × 800 × 1,100 mm Colour: light grey / RAL 5010 gentian blue Worktop: Engineered wood Base cabinet: 2-door, lockable Storage Compartment:  ...

Advantech AMiS-60 Professional mobile workstation for the medical sector High-quality, mobile nursing trolley of the Advantech brand (model AMiS-60). This system is designed as a "workstation on wheels" (WoW) and is perfect for hospitals, nursing homes or doctors' offices to combine medication dispensing and documentation directly on the patient. Highlights & Features: Ergonomic design: Thanks to the manual gas spring height adjustment, the stroller can be infinitely adjusted to any body size (sitting or standing position) with a flick of the wrist. Safe medication dispensing: Equipped with an MDS medication box including 16 individually removable compartments. The box has an electronic control (Open/Close) and a mechanical lock for emergency access. Integrated Power Supply: The chassis houses a powerful LiFePO4 battery system designed for long runtimes and fast charging. F ...

Mobile suction fan TEKA 400 V, 3000 m³/h with suction hose. Suitable for the removal of pollutants at the collection point, e.g. fresh air supply for containers, pipes and containers, also suitable for exhaust gas extraction. Engine: Elektromaschinenfabrik Lammers. Made in Germany. 400 V. 1.5 kW. 3405 min-1. Areas of application & details: TEKA suction fan 3000 m³/h, model 97103, mobile welding fume extraction, centrifugal fan 400V, shaft ventilation, extraction system workshop, duct blower, tank ventilation, tank cleaning, silo ventilation, spot extraction welding fumes, industrial fan mobile, 1.5 kW extraction, fan, radial blower with hose package NW 160, extraction funnel, shipbuilding ventilation, power plant technology, construction site ventilation, flue gas extraction, ventilation and ventilation, Lammers motor 12AA 90S-2.

Complete project for the construction of a mobile drum screening plant Complete production documents for a newly developed car-mobile drum screening plant -Complete set of drawings -Bom -Electrics must be adjusted during initial assembly -2.5 to car mobile drum screen -Capacity: from 25 cbm/h -Propulsion: Diesel generator, generator or direct external feed-in for electricity -no prototype produced yet Price is net plus VAT. Trade-in possible Further data is available on request.

Hydraulic power unit for mobile clinching pliers or mobile former ECKOLD type HA 500 / 2Fabr. No. 737 / 783 Year of construction 1991Hydraulic power unit type HA 500 / 2Operating pressure 50 - 500 bar adjustableFlow rate 2.6 l/minTank capacity 16 litresEngine power (hydraulic) 3 kWNead power 380 Volts, 50 Hz.Control voltage 24 Volts, DC pressure line with screw coupling- With solenoid valve HAWE GS 2-2- mobile on 4 swivel castorsWeight without hydraulic oil 125 kggood condition; used

Mobile motor jack crane, mobile pillar jib cranes, mobile pillar jib crane, assembly cranes, assembly cranes, workshop cranes, workshop cranes, pillar jib cranes, indoor cranes, workplace cranes -Transportable engine jack -incl.: manual trolley -with: cable -Load capacity: kg -Projection: 2,000 mm -Total height: max. 2,850 mm -Number: 1x available -Price: per piece -Transport dimensions: 1640/1515/H1585 mm -Own weight: 190 kg

Guttridge Bulkflo Mobile screw elevator, Stainless, mobile elevator screw conveyor, with a 400l holding hopper, horizontal discharge screw feeds directly onto the screw elevator, discharges at 2600mm, 160mm screw diameter, with vibratory mesh top, also three spare meshs, mobile, 3Ph

Generac Mobile Products VT1 Super Light professional light tower, year 2017, designed to provide powerful lighting on construction sites, road works, industrial areas, events or night-time interventions. This autonomous unit combines a generator set and an imposing telescopic mast of up to 9 meters, equipped with 4 powerful 1,000 W metal halide spotlights. An ideal solution to quickly illuminate a large work area without a fixed installation. ⚙️ KEY FEATURES: • Brand: Generac Mobile Products / Tower Light • Model: VT1 Super Light • Year: 2017 • Telescopic mast: 9 m • Lighting: 4 x 1,000 W • Metal halide projectors • Integrated generator set: 8 kVA • Voltage: 220/240 V • Frequency: 50 Hz • RPM: 1,500 rpm • Kubota engine • Meter: 1,813 hours • Weight: 1,115 kg • GVW: 1,300 kg • Trailer category: O2 The machine is mounted on a road trailer with drawba ...

IBIX 9 mobile sandblaster / pressure blasting unit – 2014 Specifications: - Brand: IBIX - Type / model: IBIX 9 - Product type: mobile sandblaster / pressure blasting unit - Manufacturer Description: Sabbiatrice / Sandblaster - Year of construction: 2014 - Serial number: 9185 - Pressure vessel capacity: 9 litres - Maximum working pressure (PS): 9 bar - Test pressure (PT): 10 bar - Set safety pressure (SET-PSV): 9 bar - Temperature range (TS): -10 °C to +40 °C - Material group/condition: 2/G - CE marking - Manufacturer: IBIX S.r.l., Italy Features: - Vertical pressure jet pot - Filling opening at the top - Compressed air connection - Pressure regulator - Pressure gauge - Shut-off and control valves - Blasting hose - Blasting gun / blasting nozzle - Mobile chassis - Transport wheels - Handle - Safety valve - Metal pressure vessel Application: suitable for blasting and surface treatment, ...

Attachment: Chamber filter press used semi mobile Model: pilot plant on platform mounted Design: page Holm led Filter plate format: 400 x 400 mm Chamber number: 20 Thickness: 25 mm Filter plates: PP Filter cloths: optionally available in voting on the medium Filter surface: approx. 4.72 m m² Presses contents: approx. 56 dm m³ PCB package length: 1024 mm Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min 10° MAX 50° Plate transport: manually Pumps: optional Motor voltage: 380 V Control voltage: 230V - 24 V Optional accessories: according to customer requirements and design Condition: It is a complete semi-mobile system on platform mounted, incl. control cabinet as full drainage system. This compact drainage system is easy to transport and can be taken in a very short time in operation. Appendix: Selling without trailer You want to rent this fac ...

Mobile Medical Containers The medical containers provide a safe and secure environment for most medical applications in expedition base camps or mobile field hospitals. Made of high-quality materials that meet hospital standards, these medical containers offer an optimal solution for medical operations in difficult circumstances or harsh conditions by providing functional medical space with minimal logistical space requirements. 2 x containers equipped with medical rooms 1 x container with high-quality operating equipment, practice furniture Equipment: Practice furniture / laboratory equipment Medication refrigerators Heating asecos Hazardous Goods Cabinet Helios KWL EC ventilation system Mitsubishi Air Conditioner Esco Airstream Class II Microbiological Safety Cabinets Lighting APC UPS Areas of application Disaster relief and military Field clinics Expedi ...

Transport vehicle / autonomous mobile robot (AMR), ActiveShuttle 2.0, Bosch Rexroth - used - : Price from location: 25.000.-€ (net)! autonomous mobile robot (AMR) for the automation of intralogistics, which transports floor rollers with a payload of up to 260 kg. It offers 3D obstacle detection, laser navigation without infrastructure adjustment, and an integrated touchscreen display for operation. The system is VDA 5050 compatible. Manufacturer: Bosch Rexroth Type: ActiveShuttle 2.0 Year of Make: 2021 7211000002280 / 3842560131 1x charging station 1x hand control unit Goods to be transported: floor rollers (600 x 400 mm) max. 1200 x 600mm Transport weight: max. 260 kg Travel speed: max. 1 m/s Localization (SLAM) & Navigation: Laser scanner, odometry Safety Laser Scanner: Type 3, SIL2, Performance Level d ESD (Electrostatic discharge) Li-Ion battery (48 V, 17 ...

Control panel, display, operator panel, PLC, Simatic Panel PC, Simatic Multi Panel, Simatic Mobile Panel -Manufacturer: Siemens, Simatic Mobile Panel 277 -Type: 6AV6645-0CC01-0AX0 -Quantity: 1 piece available -Dimensions: Ø 280 x 180 mm -Weight: 2.8kg

mobile workbench, folding workbench, work table, assembly bench -mobile workbench: solid design -Width: 1240mm -Depth: 800mm -Height: 840mm -Weight: 56 kg

Control panel, display, operator panel, PLC, Simatic Panel PC, Simatic Multi Panel, Simatic Mobile Panel -Manufacturer: Siemens, Simatic Mobile Panel 177 PN -Type: 6AV6645-0BA01-0AX0 -Number: 2x panels available -Price: per piece -Transport dimensions: Ø 250 x 180 mm -Weight: 2.5 kg/pc.

IBS mobile water tanks provide large additional water capacity, which is especially important on construction sites and locations that are difficult to access or do not have their own water source. The tanks are designed for quick and easy lifting onto a truck using a hook-lift system, transport to the nearest water source, fast filling, return to the site, and easy unloading. Each tank is equipped with a high-capacity pump that enables fast filling and emptying of the tank. The pump can also be used for rapid filling of the tank from larger reservoirs or other available water sources. It is sufficient to connect the pump to the water source using the hose supplied as part of the tank equipment. In addition to standard models, tanks can also be manufactured according to special customer requirements. In such cases, the customer defines the tank dimensions and pump capacity accordin ...

Mobile Hydraulic Scissor Lift (Work Platform) Platform Capacity: 500 kg Item Specification Equipment Mobile Scissor Lift Platform Capacity 500 kg Working Platform Steel anti-slip platform Drive Electric / Battery Operated Lifting Mechanism Hydraulic Scissor Type Platform Extension Depending on model Maximum Occupants 2 persons (depending on manufacturer) Guardrail Height Approx. 1.1 m Emergency Stop Yes Emergency Lowering System Yes Outriggers 4 Manual Outriggers Wheels Solid Rubber Wheels Power Supply 24 VDC Battery System (typical) PLEASE CONTACT MS.SUPAWADEE +6693-7478585 (THAILAND NUMBER) LOCATION GREATGLOVE FACTORY 6.

1 semi mobile concrete batching plant Producer: Tublorom Type: tublomix M C 1TZ capacity: 56 cbm/h working hours: 0,0 Mixer: pan mixer - Stetter 1,0 m3 Storage bins / compartment batcher: 4 aggregate inters per 10cbm (Total 40 cbm) Silos: Optional 2 pcs (80to or 100 to) Mobile silo foundation: Optional cladding/ housing: optional Silo equipment: 2 complete sets for 2 silos (filter, screws, etc) cement dosing hopper water dosing hopper admixture / chemical dosing device: 20 l + 20 l Control unit: automatic control system MCI 460 Operators stand / control container: include - incl. documentation - CE-certificate OPTIONAL possible: - Transport free construction site” (only inside EU) - Assembly and Commissioning (only inside EU) PRE FEEDING SYSTEM ON REQUEST AND AS OPTION POSSIBLE Inspection of the selling object and of reference tublomix plants by appointm ...

1 semi mobile concrete batching plant Producer: Tublorom Type: tublomix M 2,5 TZ capacity: 112 cbm/h Mixer: Stetter twin shaft mixer - Stetter DW 2,5 Mixer cleaning system optional possible Storage bins / compartment batcher: 4 aggregate inters per 17,5 cbm (Total 70 cbm) Silos: Optional 2 – 5 pcs (80to or 100 to) Mobile silo foundation: Optional cladding/ housing: optional Silo equipment: 2 complete sets for 2 silos (filter, screws, etc) cement dosing hopper water dosing hopper admixture / chemical dosing device: 20 l + 20 l Control unit: automatic control system MCI 550 Operators stand / control container: include - incl. documentation - CE-certificate OPTIONAL possible: - Transport free construction site” (only inside EU) - Assembly and Commissioning (only inside EU) PRE FEEDING SYSTEM ON REQUEST AND AS OPTION POSSIBLE Inspection of the selling obje ...

1 semi mobile concrete batching plant Producer: Tublorom Type: tublomix M3 ILS capacity: 135 cbm/h working hours: 0,0 Mixer: Stetter twin shaft mixer – Stetter DW 3,0 Mixer cleaning system optional Storage bins / inline silo: 6 bins = 2 x 30 m³ + 4 x 15 m³ (total 120 m³) Silos: Optional 2-6 pcs (80to or 100 to) Mobile silo foundation: Optional cladding/ housing: optional cement dosing hopper water dosing hopper admixture / chemical dosing device: 20 l + 20 l Control unit: automatic control system MCI 460 Operators stand / control container: include - incl. documentation - CE-certificate OPTIONAL possible: - Transport free construction site” (only inside EU) - Assembly and Commissioning (only inside EU) PRE FEEDING SYSTEM ON REQUEST AND AS OPTION POSSIBLE Inspection of the selling object and of reference EASYBATCH plants by appointment possible!  ...

Mobile containerised steam boiler plant 2.000 kg/h • Configuration: mobile containerised steam boiler plant with auxiliary systems for independent operation, designed for relocation between sites. • Inspection certificate: the pressure equipment has an inspection certificate issued by accredited pressure equipment inspection body. The certificate covers the equipment and scope of inspection identified in the certificate. • Steam boiler: I.VAR Industry BHP-EN 2000, type PFV1422000, high-pressure, monobloc design. • Performance: steam production 2,000 kg/h, rated boiler output 1,385 kW. • Pressure: 6–10 bar; maximum working pressure of the boiler 12 bar. • Fuel: LPG – propane–butane. • Burner: Baltur TBG 200 LX ME modulating low-NOx gas burner, output range 475–2,000 kW, with Lamtec BT320 electronic controls and LCM100 load controller. • Gas train: DUNGS R2 ...

Welding fume filter, welding fume extraction, soldering fume extraction, mobile filter unit, welding fume extractor -Manufacturer: Euromate, mobile welding fume extraction with 2 extraction pipes -Type: MFD -Drive: 0.75 kW -Filter: with contamination indicator -Suction pipes: length 2900 mm -Transport dimensions: 1200/800/H1100 mm -Weight: 101 kg

Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors -Manufacturer: Kemper, mobile welding fume extraction -Drive: 0.75 kW -Extraction arm: Ø 150 mm x 5000 mm -Fan wheel: Ø 290 mm x 60 mm -Quantity: 3 pieces available -Price: per piece -Transport dimensions: 1200/800/H780 mm -Weight: 38 kg/pc.

Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, dust collectors, welding fume extractors -Manufacturer: Donaldson Torit, mobile welding fume extraction / dust collector type PT 1000 -Drive: 1.1 kW -Max. volume flow: 1100 m³/h -Extraction arm: Ø 165 mm x 2210 mm -Transport dimensions: 1200/620/H1645 mm -Weight: 105 kg

NNP Mobile heated jet spray glazer Stainless steel spray glazer, twin jets mounted on frame, heated 100L tank, adjustable temp control, mobile, 3Ph

Mobil Knife Folding Unit Heidelberg VFZ-52.D Vierbruchfalzwerk Schwertfalzwerk / Mobil Knife Folding Unit Heidelberg VFZ-52.D Four-directional folding unit - Vierbruchfalzwerk Baujahr / Year 2001- Serial-No. 703796-297059 Format / Sheet Size min. 120 x 100mm Format / Sheet Size min. 520 x 360mm Geschwindigkeit / Speed 25 - 160 m/min Taktzahl / Cycle rate max. 30.000(T/h) Einlaufhöhe / Infeed height 51,5 – 91,5cm Schwertposition / Knife position 180° schwenkbar / 180° pivotable zum Anschluss an Maschinen mit DCT Steuerung / to connect on machines with DCT Control

Mobile Knife Folding Unit GUK ZG 500 Schwertfalzwerk / Mobile Knife Folding Unit GUK ZG 500 Baujahr / Year 1999 - Serial-No. 40094 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 40m/min - max. 160m/min Produktivität / Productivity 20.000 cycles/h Messerfalzwerk ist getestet und  in einem guten Zustand, getestet. Mit Eigensteuerung Elektronische Steuerung. Zum Anbau an Falzmaschinen von GUK, Heidelberg - Stahl oder MBO, sowie an Fremdmaschinen wie Sammelhefter, Zusammentragmaschinen usw. The knife folding unit has been tested and is in good working order. It has its own electronic control system. For mounting on folding machines from GUK, Heidelberg-Stahl, or MBO, as well as on third-party machines such as saddle stitchers, collators ...

Mobiles Schwertfalzwerk mit Eigensteuerung / Mobile Knife Folding Unit with SelfControl MBO Z2 Mobiles Schwertfalzwerk Eigensteuerung / Mobile Knife Folding Unit SelfControl MBO Z2 Year 1995 - Serial-No. 44951206-A Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 20m/min - max. 210m/min Produktivität / Productivity 15.000 cycles/h

Mobile Waste Sand Container Heavy-duty mobile steel container marked POUŽITÝ PIESOK / WASTE SAND”, suitable for collecting and handling used sand or similar bulk material. Power: Not applicable Configuration: Open-top reinforced frame with internal bulk bag, fork pockets or lifting channels, side locking mechanisms and four industrial caster wheels Application: Collection and internal handling of waste sand and bulk materials Condition: Used Approximate dimensions: 1,400 × 1,100 × 1,000 mm Approximate weight: 180 kg All descriptions are indicative only. Auction-ID: A1-50546-72

Mobile Material Rack Heavy-duty welded-steel mobile storage and transport rack with blue painted finish, multiple horizontal support channels and four swivel castors. Suitable for storing and moving long or flat production components. Configuration: Welded steel frame with horizontal support channels and four swivel castors Condition: Used Approximate dimensions: 1,350 × 950 × 2,040 mm Approximate weight: 100 kg All descriptions are indicative only. Auction-ID: A1-50546-55

Specifications: - Product type: mechanical support leg / support frame - Version: mobile - Operation: manual - Height adjustment by screw spindle - Heavy-duty steel construction - Wide footplate - Colour: yellow/cream - Brand: unknown - Type: unknown - Maximum load capacity: unknown Equipped with, among other things: - Mechanical screw spindle - Manual height adjustment - Swivel support/support head - Control lever - 2 transport wheels - Wide steel base plate - Reinforcement ribs around the foot - Heavy-duty central support tube - Mobile version Application: - Suitable for support and stabilization of trailers, semi-trailers and equipment, among other things - Height adjustable for positioning under the object to be supported Auction-ID: A1-47393-132

4 mobile lifting columns Specifications: Number of columns: 4 pieces Load capacity per column: 4,000 kg Total capacity: probably 16,000 kg Version: electromechanical Construction date: December 1, 2006 Features: Mobile lifting columns Wheel forks Particularities: Operation unknown but complete Auction-ID: A1-47365-98

Mobile high-pressure water mist fan (extinguishing fan) Specifications: Type: Mobile High Pressure Water Mist Fan Fan drive: hydraulic Application: Smoke & Heat Extraction, Water Mist Dispersion, Fire Suppression & Refrigeration Features: Large hydraulically driven fan Hose for water supply Front spray nozzle for spreading a fine water mist Particularities: Technical condition and operation not specified. Auction-ID: A1-47394-196

If mobile chamber filter press / used filter press Filox 800 x 800 construction year: In 1980 record format: 800 x 800 mms benefit length: 5,200 mms chamber number: 88 pieces cake thickness: 25 mms filter pressure: 15 cash Schliessdruck: Min 300 cash, max. 320 cash whole filter surface: approx. 98 square metres cake volumes ges .: approx. 1,100 litres engine tension: 380 V, 50 hertz protective kind: IP 44 record material: PP expiry: openly service side: on the left cloths: Optionally

Mobile Auger with hinged hopper. Ideal for filling of silo trucks. The appliance without problems in the open air can be stored by the hinged hopper. The promotion or a change of location is quickly done with the hitch. (Street legal on request possible)Displacement approx. 60 m m³/h, screw diameter 350 mm, length 8 m, spout height approx. 5 m, drive motor 4KW, capacity of the hopper 4 m³. Please request special designs and snails with different services to meet your needs! We almost always have a solution!

Mobile press system with belt or packing press - can be varied by hourly performance More detailed information on request!; New machine - best condition

J. Engelsmann mobile lifter for containers etc., max. weight 300kg, fork length approx 700mm, fork diameter 50mm, fork gap approx. 600mm, max. lift approx. 1700mm from the floor.