mobile x ray used for sale

Fischerscope XRF X-RAY 5400 X-ray fluorescence - EDXRF spectrometer Year of manufacture 2010 2010/11 has measured with ca-400 hours of operation, only sporadically in a pilot plant (sputtering LEYBOLD) New price: 100.000 € 5400 x RAY X-ray fluorescence - spectrometer (EDXRF) are designed for use in industrial production facilities, specially designed for continuous measurement in the manufacturing process, to the non-destructive analysis and measurement of thin layers and layer systems. For the industrial requirements and continuous operation, they are particularly robust and low-maintenance design.

Raystat / Krebser Swivel Bracket US-Uni with - Generator CPI CMP 200 DR - Tube RAD 14 Fa. Varian 0.6/1.2 - Mobile patient couch • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • The offer is subject to prior sale.

Single beam X-ray inspection device,, was used for cylindrical jars and cans,, Capacity: approx. 150 glasses / min,, with ejection of contaminated containers,, with conveyor belt,, in use until 04/2024.

Throughput: approx. 150 jars/min, foreign body detection capability for glass fragments: from approx. 3 x 3 x 3mm, metal: from approx. 1 x 1 x 1mm, stones and bones: from approx. 3 x 3 x 3mm, suitable for glass containers, tinplate cans, beverage cartons (carton bricks), and plastic containers, typical false rejection rate per 10,000 inspected products: approx. 7, maximum container diameter: 155mm, maximum inspection speed: 100m/min, standard sensor speed: 45m/min, sensor height: 256 to 410mm, pixel size: 0.4 x 0.4 to 0.8 x 0.8mm, rejection system: electropneumatic cylinder, operator interface: 17 inch touchscreen, remote access: Ethernet or modem, frame material: AISI 304 stainless steel, sensor protection class: IP55, power supply: 3 phase + protective earth (3PH + GND), operating voltage: 400V, machine power consumption (2 motors): 3kW, processing unit power consumption: 500W, high vo ...

End-of-line X-ray scanner for professional foreign body detection,, Ideal introduction to state-of-the-art X-ray inspection,, easy integration into existing production lines,, comfortable user interface,, easy, fast and thorough cleaning,, Max Product, Height/width: See enclosed beam chart, Running direction: L->R, conveyor belt, height: 850 – 950 mm (adjustment range), Throughput: approx. 100 pcs/min (please contact us before submitting an offer), Degree of protection: IP 65, Sorting: using band-stop, Total length: 1,800mm, Bandwidth: 420 mm, Scan width: 400 mm, VPN access: yes, EKS: Yes, X ray lamp, Monitored yellow: yes, Light red: yes (active with FK detection), Statistics export: yes, Basic machine equipment, a) General machine data, • Industry scanner made of stainless steel with open profile, • Power supply connection:, o 110-230VAC / 50/60Hz / 1Ph I o approx. 2.2 kVA I o ap ...

Manufacturer: Precision X-Ray Model: X-Rad 160 XL Year of Manufacture: 2024 Run time: Approximately 80 hours, based on unit logs Machine type: X-ray irradiation system Input voltage: 1PH 230VAC, 50/60Hz FLA (Full Load Amps): 40 Amp Application: Used to irradiate semiconductor ICs for robustness testing to X-ray exposure Usage history: The project this unit was purchased for has concluded. It was found the exposure type could not be well quantified for future qualification needs, so the unit has not been used much recently. Condition: Fully functional, but displays error messages that do not clear during warm-up or irradiation. When this occurs the unit must be restarted, and it may take several attempts to complete warm-up and function. Cooling: The tube cooler is wall-mounted to save space, but can also be set on the floor.Hoses allow the unit to be positioned at least 10 feet  ...

Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...

Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-3000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...

Temperature controller, temperature sensor, temperature converter, temperature monitor, thermostat, flue gas thermostat, trace heating thermostat -Manufacturer: Raychem, thermostat with temperature sensor -Type: TRDR -Temperature range: - 0-15 °C / 0-15 °C -Dimension: 160/105/H55 mm -Weight: 0.6 kg

General SKU408T1293 MakeMettler-Toledo LocationBarneveld CEcheck TypeXS 3 Advancheck Main Features MaterialStainless steel/Polypropylene Specified Features - Metal detector Metal detectorcheck Tunnel sizes270x160 mm Product space270x160 mm With conveyor beltcheck Belt width290 mm Belt length2170 mm With motorcheck With variable speed drivecheck Belt speed50 m/min Inlet270x160 mm Capacity120 pcs/min With air pulse ejectioncheck General No.37000027 Year of construction2010 Mounted on framecheck With switchas is Floorspace1,6x2,2 m Total height1,9 m Weight530 kg Extra SpecificationsAccuracy class: XIII(1)Metal detectorsOils & fatPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchBiotechnologySpicesFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesBiopharmaceuticalAPIMett ...

General SKU423U1428 LocationBarneveld CEcheck MakeMettler Toledo Main Features MaterialStainless steel Motor2.3 KW Specified Features - Miscellaneous Capacity3,600 scans/sec Motor2.3 kW, 240 volt MaterialStainless steel With jacketcheck General TypeR20 Mach.No.1009R20V1321 Year of construction4-2009 Floor space2,00 x 1,00 m Total height2,40 m Weight600 kg Extra SpecificationsScan speed 3,600 scans/sec, diode size 0.2, 0.4, 0.8 or 1.5 mm.touchscreen control.input belt conveyor with motor, 0.37 kW, 1380/168 rpmair pressure 6 bar- easy to implement in a systemMiscellaneousOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-wast ...

table length: 3048 mm table width: 1524 mm burner heads: 1 stroke: 270 mm speed: 100 m/min dimensions: 8900 x 2260 x 2220 mm weight of the machine ca.: 7.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Trotec Model: Rayjet Type of Machine : CO₂ laser cutting and engraving machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

General SKU327U784 MakeRayneri Groupe VMI (FR) TypeDynablox SB 35 SE No.100853 Year of construction02-1999 Mounted on framecheck Main Features MaterialStainless steel Motor1.5 KW Length900 mm Specified Features - Stirrer Stirrercheck Propellor stirrercheck Shaft length900mm Sizes stirring headDia: 300mm Number of stirrers on shaft1 Motor1,5 kW, 230/400 Volt 1410rpm With frequency controllercheck Speed mixing shaft354 rpm Mounted on supportcheck Adjustable height(manual) MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) General LocationBarneveld With switchgear(as is) Floorspace1,6x1,1 m Total height3,0 m Weight350 kg CEcheck Extra SpecificationsThe machine comes with an additional spiral-cup agitator.Oils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberB ...

General SKU408T1292 MakeMettler-Toledo LocationBarneveld CEcheck TypeXS 3 Advancheck Main Features MaterialStainless steel/Polypropylene Specified Features - Metal detector Metal detectorcheck Tunnel sizes270x160 mm Product space270x160 mm With conveyor beltcheck Belt width290 mm Belt length2170 mm With motorcheck With variable speed drivecheck Belt speed50 m/min Inlet270x160 mm Capacity120 pcs/min With air pulse ejectioncheck General No.37000019 Year of construction2010 Mounted on framecheck With switchas is Floorspace1,6x2,2 m Total height1,9 m Weight530 kg Extra SpecificationsAccuracy class: XIII(1)Metal detectorsOils & fatPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchBiotechnologySpicesFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesBiopharmaceuticalAPIMett ...

General SKU215X090 MakeVMI Rayneri TypeDYNAVAR SB 25 No.129542 Year of construction2002 LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Length1300 mm Specified Features - Stirrer Stirrercheck Paddle stirrercheck Shaft length1300 mm Sizes stirring headø 175 x 30 mm Motor1,5 kW 400 Volt With variable speed drivecheck Speed mixing shaft350 — 1750 rpm MaterialStainless steel 1.4306 (304L) General Floorspace1,3 x 1,4 m Total height2,2 m Weight400 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsStirrersDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid phar ...

General SKU292M361 LocationBarneveld MakeVMI Rayneri TypePIL.direct 15/750 VF No.75953 Main Features MaterialStainless steel Motor0.75 KW Length700 mm Specified Features - Stirrer Propellor stirrercheck Shaft length± 700mm Sizes stirring headø 110mm Motor0,75 KW, 230/400 Volt With frequency controllercheck Speed mixing shaft100-808 rpm Mounted on supportcheck Adjustable heightcheck MaterialStainless steel General Year of construction1996 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgear(as is) Floorspace1,1 x0,8 M Total height1,7 M Weight150 KGOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsStirrersDetergent & surf.Other pharmace ...

This 3-axis Trotec Rayjet R400 was manufactured in 2021. It features a powerful 100 W DC CO2 laser source and a generous working area of 1030 x 630 mm. The machine is equipped with an air assist system, LED lighting, and a control panel for precise laser positioning. If you are looking to get high-quality laser engraving capabilities, consider the Trotec Rayjet R400 laser engraving machine we have for sale. Contact us for further details.

A comprehensive machine package for textile processing, automatic cutting, laser cutting, industrial sewing operations, punching and riveting is offered. 1) CNC cutting table Atom FlashCut 222, year of manufacture 2020, machine weight: approx. 650kg, the machine will be available at the end of 2026. 2) CO₂ laser cutting and engraving machine Trotec Rayjet 50 with associated extraction system, working area: approx. 457mm/305mm, laser power: 30W, max. processing speed: approx. 1.5m/s, Aigner/Trotec Atmos Cube extraction system, year of manufacture: 2020, airflow: 320m³/h. 3) Single-needle lockstitch flatbed machine with triple feed and large vertical hook Dürkopp Adler 867 ECO, subclass 867-190020-M, max. stitch length: approx. 9mm, clearance: approx. 335mm, clearance height: approx. 125mm. 4) Single-needle high-speed lockstitch machine Juki DDL-9000B-SS, year of manufacture 2019, max. ...

Fully functioning mobile X-ray system. Very good condition.

GE mobile X-ray machine VMX • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany and can be picked up immediately. • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation and configuration of the system or the system components must be carried out by a specialist or technician authorized by the manufacturer!

Technical data: Fruit wash, grind, pressing then the juice pasteurization and bag-in-box packaging pour performance up to 750 L/h incl. mounted hydraulic large box emptying wash grinding plant Kreuzmayr KWEM 1000 cover press Kreuzmayr KEB 500 Pasteur Kreuzmayr PA 750 oil bag-in-box fillers Kreuzmayr CBF 900, incl. 6-digit series bottling juice pump, strainer, 2 PCs. juice buffer tank 220 litre stainless steel base frame, Tandem chassis with tyres 195/50-10 plan building with gas spring lift for the two side walls, roll-over tarp back 4 PCs. crank rotating supports for the horizontal alignment of the System cleaner, air compressor and complete piping fix established

Two (2) Surplus/Never used, Mobile Substations 25/30 MVA, 115/13.8 kV. 60 Hz. 3 Phase, with ODTF1/ODAF2 cooling, YNd1 Connection, Cooper Windings, on a low bed chassis trailer, HV Surge arrester, High Capacitive Voltage transformer, 145 kV Hybrid Switchgear, Outdoor Circuit Breaker Roof Bushing, Control and Protection Panel, Battery Charger, Batteries and all the auxiliary equipment for this substation.

5 pieces, mobile dock levellers made of aluminium, – used- : Price per piece from location: Type 1: normal (approx. 2 pieces) now only 450.-€ instead of 650.-€ (net)! Type 2: two side tread plates (approx. 3 pieces) now only 550.-€ instead of 850.-€ (net)! Manufacturer: unknown, could be Altec Type: unknown, could be HF 09, Year of manufacture: unknown Width approx. 1.50m Length with movable driveways at the ends: approx. 2.35m Load capacity: unknown, could be 1800kg Net weight: unknown, could be 107kg Original price approx. 1.900.-€ (net) Condition: good Available: immediately Location: Niedernberg near Aschaffenburg

Mobile Mixing Plant, Fabr. IMER 1. Mixer: 1,200 litre capacity, 800 L net output for compacted concrete 2. Control: Original IMER control type HPS 2100-P 3. Year of manufacture 2021 - In-line feeder 4. Cement silos: 3 pieces each 60 tons or 42.9 m³ capacity 5. Cement augers: 3 pcs, with lengths of 6.0 m & 6.8 m 6. Aggregate bunker: 3 chambers with a total volume of 65 m³ 7. Kübelwagen: with a 1,000 litre bucket

FINLAY / TEREX 390 HydraScreen, screen / screening, Deutz engine, including additional belts, German Machine, 5.150 h, year 1996

Hydraulic mobile tin hole punch for e.g. control cabinet construction and control construction Manufacturer Alfra Type SKP-1 Punches holes of max 140mm diameter in 3mm sheet metal Round, square and rectangular stamps possible. Punch punch punch tin punch drill tin hole drill monocut gap-plate-hole, hand hydraulics, ball bearing screw, Klauke Alfra Special price

ID3522 Semi-mobile screening plant for dry classification consisting of: 17 m³ feed hopper with bar sizer, mobile and pivoting AA 30 m conveyor belt, double-deck screening machine (screening area 2 x 16 m²), various conveyor belts (discharge belts, ascending belt, sand conveyor, oversize belt, product belt), control cabinet (built in 2021) Semi-mobile screening plant for dry classification consisting of: 17 cbm feed hopper with bar sizer, riser belt movable and swivelling AA 30 m, double-deck screening machine (screening area 2x16 sqm), various conveyor belts (discharge belts, riser belt, sand belt, oversize belt, product belt), control cabinet (year of construction 2021)

Kuka Robot KR6 R700 sixx, Mobile SZ AGILUS V2 Year of construction: 2016 Reach: 706 mm Weight: 50 kg Payload: 6 kg Kuka KRC4 compact controller KUKA. SystemSoftware KSS SR 8.2 Kuka SmartPAD 1.0 Kuka connecting cable 7m Dimensions 900 x 1200 x 1850mm Weight 295kg Ideal for training or trade fair

Paint mist extraction mobile with 3 meters flexible slauch

External extraction 0.37 KW 380 V 16 A 3 ports Length 40 cm Width 50 cm Height 84 cm

Recycling machine trade AGICOM-Pedergnana OG: The battery-powered cutter has been specially designed for applications where more freedom of movement is required, to carry out cutting operations in hard-to-reach places or when it is important that the cutter must be ready for use in standby mode in case of emergency. Battery-powered cutters are made of high-quality aluminum. The HOLMATRO cutter model ICU 10 A 10 is particularly suitable for cutting telephone cables, underground cables, electrical cables and steel cables. Specifications: Maximum cutting force: approx. 242 kN, approx. 24.7 tons Maximum opening width: 115 mm Maximum operating pressure: approx. 500 bar Dimensions: L 737 x W 222 x H 177 mm Weight: 17.3 kg

We are offering for sale a complete mobile screen plant with trailer : Trailer Type: ZAL 4PA Towing capacity: 47,000 kg Own weight: 8,600 kg Conveyor Belt Type: ML-Band Year of Manufacture: 2012 Screen Type: SEWU 2400 x 5000 Year of Manufacture: 2012 Find more here - .ucymachines/ Contact us at - sales@ucymachines

; Gross weight [kg]: 670; Engine: Battery System: LiFePO4; Accessories: Battery, Control Panel, AC output sockets: 2x 32A (1 for parallel), AC Input sockets: 1x 15kW, DC input: 1x 30kW

4x mobile 4m privacy screens on castors with door These 4 mobile privacy screens on castors are a flexible solution for your construction site needs. Made of sturdy steel, they offer optimal security and protection with their length of 4 meters and a 1m door. The set of 4 allows for a quick and uncomplicated assembly and dismantling process, making them ideal for use on a wide variety of construction sites. Ideal for privacy or as a barrier - these privacy screens are a must for every professional craftsman's needs. Flooring allows for a beautiful look. They are painted in black, the blue picture is from other walls. The privacy screens were built for 1500€ for a customer. It briefly set it up once and then went bankrupt. Since then, they have been packed on two pallets. Thus, they are almost new.

Mobile pipe layer, self-sufficient: You can find exposé, pictures and videos on our homepage The Mobile Factory is a stationary system originally developed for welding and laying pipelines. Thanks to its crawler chassis, this system can follow the work progress or be deployed on different terrains as needed. In principle, there are no limits to its application areas. Thanks to pre-installed facilities such as electricity, compressed air, hydraulics, lighting, a recreation room, an incineration toilet, a kitchen, and generators, the Mobile Factory is completely self-sufficient. It can therefore also be used in connection with basic services such as pipeline construction. It can also be used as a workshop, production facility, development center, research station or similar. Technical specifications: 1. Mobile Factory complete: 2. Basic module: Highlights: - Pipe magazine for 8 pipes up t ...

table length: 1200 mm table width: 800 mm weight: 153 kg With the new mobile lifting table from Siegmund you can get there quickly and easily to the ideal working height. Set new standards in ergonomics as well Flexibility and benefit from the wide range of possible uses. The stable steel construction offers stability even during the Adjustment of the working height. Maximum load capacity including perforated plate 500 kg Working height between approx. 700 and 1,000 mm including 16 hole plate: - through hardened tool steel X8.7, - plasma nitrided and BAR coated - Hole Ø 16 mm - Holes surface 50x50 mm grid - Material thickness 12 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

fire: SCM Technology, model: CM 1200 Mobile, Year of construction: 2010, Length: 11.000 mm, Width: 2.700 mm, box: 8.000 mm, Engine: Diesel engine, Cutting: 1000 x 900 mm, Stamper: 1 x 200 tons, General conditions: working, Cutting force: 1200 tons, Weight of machine: 53 tons

Pusher force: 120 t, Open box dimensions: 5000 x 2400 mm, Bale size: 800 x 600 mm, Engine: Electro, Engine power: 90 kW, Year of construction: 2011, Hydraulic: Parker Pumps and Valves, Operating hours: 7500 h

General SKULT009 MakePharmatec GmbH LocationGermany CEcheck TypeFluent Tank Specified Features - Bioreactor Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume350 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Bioreactor Capacity350 Ltr (460 Ltr) Vessel sizesdia.791 x696mm Dished topcheck Dished bottomcheck With covercheck OutletG1: Max. temperature-10/95°C. With propellor stirrer:Magnetic ZETA, Type BMRT 125 PI Ex S Dk Y: Motor0,18kW, 230/400V, 2825rpm (EX) With variable speed drivecheck Speed mixing shaft75-540 rpm Bioreactors MaterialStainless steel 1.4404 (316L) General No.12563 Year of construction2021 Mounted on legs:platform: With switchcheck With switchgear(as is) Total height+/- 1,7 m Extra SpecificationsThe tank is equipped with pressure gauge, temperature sen ...

ID3713 SCS 10.920 hours/hours Mobile Scrap Shear Mobile scrap shears

General SKU419T1316 Make3C France LocationBarneveld CEcheck TypeSKID Fondoir Mobile 150 Liters Girard Pressure Working pressure0.5 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume230 Ltr. Motor3 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity230 Ltr. (150 Ltr. net) Vessel sizesdia. 675x746 mm Dished bottomcheck Dished top sidecheck With covercheck Top connectionsDN76 OutletDN25 With jacket30 Ltr. Max. temperature140 °C With turbo stirrer(dia. 150 mm) Motor3 kW Speed mixing shaft1500 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General No.6158 Year of construction2000 Mounted on legscheck With switchas is Floorspace2,3x1,3 m Total height2,3 m Weight955 kg Extra Specificationswith:stirring vessel: 3C France, Tremie 15 Liters: Ø300x364 mm, 22 Ltr. (15 Ltr. net), vessel insulated, w ...

50-liter BCD mixing tank with Huber temperature control (0 to 65°C), With agitation, lifting the lid, tank lighting, 4 vents. 1 CIP ball, All documentation is in English (including the FAT), 1 tank of their 1 temperature regulation system Huber are available., Volume: 57 litres, Useful volume: 50 litres, Metal of the tank: 316L, Pressure +: ATM, Metal tank: 316L, Pressure -: -6,5 ATM, Elec: 400V 50Hz , Tank metal: 316L, Agitation type: Small blades / from the top, Stirring speed variation: Yes, Engine: ABB, Engine power: 0,25kW, Cover diameter: 450mm, Tank bottom outlet: Yes / 25mm , Event: Yes, Mobile tank: Yes, Double envelope: Yes, Metal of the double envelope: 304L, Double envelope volume: 10 liters, Double envelope pressure: + 6,5 , Double envelope fluid: Gas Group 2, Dimensions (mm): 600 x 1250 mm H2000mm, Weight (kg): 438 / 505 kg, Set temperature: 0-150°C , Double envelope meta ...

General SKULT0109 LocationBarneveld CEcheck MakePharmatec GmbH / HINKE Tankbau GmbH Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume7.5 Ltr. Motor0.12 KW Specified Features - Bioreactor Reactorcheck Capacity6 l. (7,5 l.) Vessel sizesø 150 x 458.5 mm Slope bottomcheck Outlet3/4: With jacket2,5 l. Max. temperature—10 / 95 °C With propellor stirrerMagnetic: ZETA, Type BMRT 50 W EX S Dk Motor0,12 kW 230/400 V (Ex) Speed mixing shaft125—860 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404 General TypeBreak / Side Fraction Tank Year of construction2021 Total height± 1.2 m Extra SpecificationsThe tank is equipped with a pressure gauge, a temperature sensor, level switches, and manually or pneumatically operated valves, including safety d ...

General SKULT0108 LocationBarneveld CEcheck MakePharmatec GmbH / HINKE Tankbau GmbH Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume7.5 Ltr. Motor0.12 KW Specified Features - Bioreactor Reactorcheck Capacity6 l. (7,5 l.) Vessel sizesø 150 x 458.5 mm Slope bottomcheck Outlet3/4: With jacket2,5 l. Max. temperature—10 / 95 °C With propellor stirrerMagnetic: ZETA, Type BMRT 50 W EX S Dk Motor0,12 kW 230/400 V (Ex) Speed mixing shaft125—860 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404 General TypeBreak / Side Fraction Tank Year of construction2021 Total height± 1.2 m Extra SpecificationsThe tank is equipped with a pressure gauge, a temperature sensor, level switches, and manually or pneumatically operated valves, including safety d ...

General SKULT0107 LocationBarneveld CEcheck MakePharmatec GmbH / HINKE Tankbau GmbH Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume7.5 Ltr. Motor0.12 KW Specified Features - Bioreactor Reactorcheck Capacity6 l. (7,5 l.) Vessel sizesø 150 x 458.5 mm Slope bottomcheck Outlet3/4: With jacket2,5 l. Max. temperature—10 / 95 °C With propellor stirrerMagnetic: ZETA, Type BMRT 50 W EX S Dk Motor0,12 kW 230/400 V (Ex) Speed mixing shaft125—860 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404 General TypeBreak / Side Fraction Tank Year of construction2021 Total height± 1.2 m Extra SpecificationsThe tank is equipped with a pressure gauge, a temperature sensor, level switches, and manually or pneumatically operated valves, including safety d ...

General SKULT0101 MakePharmatec GmbH / HINKE Tankbau GmbH TypeFluent Tank Year of construction2021 Mounted on legs:platform: Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume350 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Bioreactor Notified bodyHINKE Tankbau GmbH Capacity350 l. (460 l.) Vessel sizesø 791 x 696 mm Dished topcheck Dished bottomcheck OutletG1: Max. temperature—10 / 95 °C With propellor stirrer:Magnetic ZETA, Type BMRT 125 PI Ex S Dk Y: Motor0,18 kW 230/400V 2825 rpm (Ex) With variable speed drivecheck Speed mixing shaft75—540 rpm Bioreactors MaterialStainless steel 1.4404 General LocationBarneveld With switchcheck With switchgear(as is) Total height± 1,7 m CEcheck ATEX designedcheck Extra SpecificationsThe tank is equipped with a pressure gauge, a temperature sensor, level swi ...

General SKULT0106 LocationBarneveld CEcheck MakePharmatec GmbH / HINKE Tankbau GmbH Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume20.5 Ltr. Motor0.12 KW Specified Features - Bioreactor Reactorcheck Capacity15 l. (20,5 l.) Vessel sizesø 250 x 458 mm Dished bottomcheck Dished top sidecheck Outlet3/4: With jacket4,5 l. Max. temperature—10 / 95 °C With propellor stirrer:Magnetic ZETA, Type BMRT 50 W EX S Dk: Motor0,12 kW 230/400 V (Ex) Speed mixing shaft125—860 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404 General TypeMain Fraction Tank Year of construction2021 Mounted on legs:mobile skid: With switchcheck With switchgear(as is) Total height± 1,2 m Extra SpecificationsThe tank is equipped with&:nbsp:a pressure gauge,&:nbsp:a  ...

General SKULT0102 LocationBarneveld CEcheck MakePharmatec GmbH / HINKE Tankbau GmbH Pressure Working pressure3 Bar Vacuum possiblecheck Number of horizontal pressure tanks1 Main Features MaterialStainless steel Volume255 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Bioreactor Notified bodyHINKE Tankbau GmbH Capacity190 l. (255 l.) Vessel sizesø 641 x 879 mm Dished topcheck Dished bottomcheck OutletG1: Max. temperature—10 / 95 °C With paddle stirrer:Magnetic ZETA, Type BMRT 80 PI Ex S Dk Y: Motorcheck With variable speed drivecheck Speed mixing shaft125—930 rpm Bioreactors MaterialStainless steel 1.4404 General TypeSolvent Tank Year of construction2021 Mounted on legs:mobile skid: With switchcheck With switchgear(as is) Total height+/- 1.5 m Extra SpecificationsThe tank is equipped with&:nbsp:a pressure gauge,&:nbsp:a temperature sensor, an ...

General SKULT0105 LocationBarneveld CEcheck MakePharmatec GmbH / HINKE Tankbau GmbH Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume80 Ltr. Motor0.12 KW Specified Features - Bioreactor Reactorcheck Capacity65 l. (80 l.) Vessel sizesø 347,6 x 888 mm Dished bottomcheck Dished top sidecheck OutletG1: With jacket13 l. Max. temperature—10 / 95 °C With propellor stirrerMagnetic: ZETA, Type BMRT 50 W EX S Dk Motor0,12 kW 230/400 V 900 rpm (Ex) Speed mixing shaft125—860 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404 General TypePool Tank Year of construction2021 Mounted on legs:mobile skid: With switchcheck With switchgear(as is) Total height± 1 m Extra SpecificationsThe tank is equipped with a pressure gauge, a temperature sensor,  ...