mobile shear used for sale

Alligator scissors Lindemann Alibo The Lindemann Alibo has a mechanical hold-down. The scissor head is protected with a safety basket. Machine On hand Knife length : 760 mm Weight : 4200 kg Mouth width at the tip : 200 mm Cutting capacity: 0.45 kN/ mm² : Ø 70 mm Number of strokes : 20 – 40 cuts/min Dimensions: 4.20 x 1.50 x 1.80 meters Drive: 15 kw Hold-down: Mechanical

Capacity 6070 x 6 mm Electric back gauge Elevated table at the rear

Capacity 3050 x 6 mm Adjustable backgauge

Machine in good technical condition, possibility of testing after agreement. material thickness up to 4mm cutting length 2000mm engine: power 5.5 kW, speed 1500 min-1 Machine weight 3000 kg. Machine dimensions L x W x H approx. 3000mm x 2000mm x 1300mm.

Capacity: 3100 x 8 mm (steel) Cybelec NC backgauge Rear entry protection

JMC 900 alligator shears (new machine) The JMC 900 has a hydraulic hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Out of stock Delivery time: On request Manufacturer: Mc Intyre Knife length: 920 mm Measuring opening: 473 mm Cutting capacity: 233 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 aperture: 26 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 3200 x 1030 x 1800 mm Weight: 4400 kg Drive: 18.5 kw / 400 V + 1.5 kw electric motor cooler Operation: Foot pedal

The machine is in good technical condition. Max. length of cut sheet: 4000mm Max. thickness of cut sheet: 6mm Controlled rear stop with a range of 1000mm (stroke) Manually adjustable knife spacing Stroke height regulation Weight: 11,000 kg

Capacity 4100 x 6 mm Cybelec DNC 60 CNC control Pneumatic elevation table at the rear Electric cutting gap and angle adjustment

Capacity 3050 x 6mm Touch screen control Electrically adjustable backgauge and cutting gap High support table at the rear with return to sender Small parts are ejected at the front

Capacity: 3100 x 8mm Electric Elgo NC back gauge good condition inspection possible

The machine is in good technical condition. Max. length of cut sheet: 3000mm Max. thickness of cut sheet: 12mm Dimensions LxWxH: 3600 x 1600 x 1900mm Weight: 8300kg By prior arrangement, the possibility of a tour in progress.

Capacity: 3200 x 3mm Renewed control panel from Schroder (original) New encoders and recently spindles High and sharp upper blade Hydraulic automatic top clamping

The machine is in good technical condition. Max. length of cut sheet: 2500 mm Max. tl. cut sheet metal: 12mm Machine dimensions: 3000 x 2200 x 1900mm Machine weight: approx. 10500kg In agreement, the possibility of inspection in progress.

Machine weight: 28800 kg Max. cutting length: 6100 mm Max. metal sheet thickness: 10 mm Unloading in racks: 350 mm Maximum number of strokes per minute: 8-13 min

The machine is in good technical condition, it is possible to test it by agreement. Max. sheet length: 3000 mm Max. sheet thickness: 16 mm Weight approx.: 12000 kg Dimensions: 4200x1700x2300 mm

DURMA MS 2004 guillotine shears were built in 2008 in Turkey. The machine, characterised by the application of many facilities and modern solutions, guarantees precise and efficient machining of, among others, stainless steel, aluminium, copper and plain steel. A sheet metal with a maximum thickness of 4 mm is fed through ball transfers built into the work table, whose design protects the surface of sensitive materials from scratches and nicks. All machining process parameters are programmed on the intuitive DURMA ENC-100M control panel with a clear LCD display and memory for 50 programmes. During the cutting process, the rigid design of the machine ensures that sheet deformations are within tolerance, making both the workpiece and the cut-off ready for further machining. The DURMA MS-2004 mechanical guillotine shears are offered with direct drive, high-quality cutting knives with adj ...

Ermak HGS 3100x6 CNC Guillotine Shear Cybelec Contron Unit Machine is in excellent condition

Ermak HGS 4100X6 CNC Guillotine Shear Machine is in excellent condition Cutting length : 4100 mm

Jusan shear for cutting uncoiled wood. Includes drive belt for the sheet and two 80% blades. It works perfectly and can be viewed at any time.

Hand lever plate shears and profile steel shears Knife length 400mm Cuts sheets up to 5mm Cuts round steel up to 13mm Heavy and stable design with foldable storage table. Mounted on base More hand lever plate shears in stock, also for round steel and profiles!

Durma AHGM 6012 NC Guillotine Shear Cutting length : 6100 mm Machine is in good working condition

Safer 3100 mm x 16 mm NC Guillotine Shear Cutting length : 3100 mm Max. cutting thickness : 16 mm

Ermak CNCHVR 6100 x 16 CNC Guillotine Shear Cutting length : 6100 mm Cutting : 6-10 cut per minute Machine is in good working condition

Electrically adjustable back gauge Manual cutting angle adjustment Light screen protection at the front and rear 1348 power hours

Capacity 2000 x 4 mm Adjustable backgauge Walk-in protection at the rear

Capacity 3100 x 8 mm Equipped with newer touch controls Adjustable backgauge, cutting angle and cutting clearance Elevated table at the rear

Capacity 3100 x 10 mm DT-7 Touch control Adjustable backgauge and cutting clearance Elevated table at the rear Walk-in protection

Capacity: 3100 x 6mm Electric back gauge Walk-in security at the rear

DURMA SB 3020 hydraulic guillotine shears built in 2008 in Turkey are an ideal choice for machining stainless steel, copper, aluminium and plain steel. Workpieces with a maximum thickness of 20 mm are cut using extremely precise, hardened cutting knives with manual adjustment of the gap between the blades. The high-quality monoblock design, combined with the hydraulic system, additionally ensures the highest stability and machining performance, even during the most demanding challenges. To facilitate the operator’s work, special transport rollers have been integrated into the work table, on which the workpiece is fed directly under the cutting line. The machining parameters are programmed in the intuitive DURMA ENC 100M control panel with clear LCD display and memory for 50 programs. The DURMA SB 3020 guillotine shears also features a driven back stop with T-slots and sockets with d ...

This HACO HSL 3013 Shearing machine was manufactured in the year 2007 in Belgium. It is equipped with a HACO SP8 control unit. The machine has a cutting thickness of 13mm

This Haco TS 3012 Shearing machine was manufactured in the year 2004 in Belgium. It is equipped with HACO SP 8 control unit. The machine has a max cutting length of 3000 mm.

This JORDI CH 6100 -10 Shearing machine was manufactured in the year 2001 in Spain. Contact us anytime for further questions.

This Baykal HNC 8116 Shearing machine was manufactured in the year 2014 in Turkiye. It is equipped with a CYBELEC DNC 60 control unit.

Specifications: - working width 2540 mm - max. cutting capacity St 40 4 mm - mot. Cutting angle adjustment - Cut gap. by scaled adjustment screws - Number of hydraulic holders 14 pcs - Mot. backgauge with positioning. 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per min - Hydraulic drive 400 V / 7.5 kW - Table height 1030 mm - Space requirement approx. W 2500 x H 1630 x D 2150 mm - Weight approx. 3600 kg - with: - Sheet metal holding pneum. supported - front angle stop + support arms - Electronic cutting depth adjustment - Cut line lighting - E-foot switch

sheet width: 3100 mm plate thickness: 13,0 mm thickness at Niro-steel: 8,0 mm down holder: 14 Stück no. of strokes: 11 Hub/min oil volume: 310 ltr. cutting angle: 2,0 ° throat: 350 mm table height: 900 mm total power requirement: 22,0 kW weight of the machine ca.: 12200 kg range L-W-H: ca. 4100 x 2300 x 2235 mm -------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom ...

sheet width: 3100 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm down holder: 14 Stück no. of strokes: 13 Hub/min oil volume: 260 ltr. cutting angle: 2,0 ° throat: 350 mm engine output: 22,0 kW back stop - adjustable: 1.000 mm weight: 10.575 kg. range L-W-H: 4,05 x 2,5 x 2,17 m -------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.trav ...

sheet width: 3100 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm down holder: 14 Stück no. of strokes: 13 Hub/min oil volume: 260 ltr. cutting angle: 2,0 ° throat: 350 mm engine output: 22,0 kW back stop - adjustable: 1.000 mm weight: 10.575 kg. range L-W-H: 4,05 x 2,5 x 2,17 m -------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.trav ...

cutting length: 3100 mm cutting thickness: 10 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Cutting length limitation Cut edge lighting Weight: approx. 10,000 kg

sheet width: 3050 mm plate thickness: 6 mm distance between columns: mm blade length: 3050 mm total power requirement: 11 kW weight of the machine ca.: 7,6 t dimensions of the machine ca.: 2,1 x 3,3 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: Sheet metal scissors (lid scissors) Manufacturer: MÜLLER & KURTH Condition: very good Offer type: used machine Specifications: Power: 1100 x 1.0 mm Drive type: by hand Remark: Parallel stop, Hold Weight: 300 kg The machine is in a very good and immediately ready for use condition and can be visited and demonstrated with us. We would be pleased if our offer finds your interest. Errors, changes and prior sale excepted.

cutting length: 1030 mm sheet thickness: 2.5 mm steel Motor-adjustable backgauge up to 1,000 mm in 2 speeds with digital display Pneumatic sheet metal holding up Side stop and table extension Knife sharpened Weight approx. 1000 kg

sheet width: 3100 mm plate thickness: 10 mm cutting angle: 2 ° down holder: 14 Stück no. of strokes: 13 Hub/min throat: 350 mm oil volume: 260 l control: CYBELEC CybTouch 8 total power requirement: 22 kW weight of the machine ca.: 10.550 kg dimensions of the machine ca.: 4000x2250x2050 mm Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German The data for this ad was created with ModulMWS - the ...

Machine has 30tns, 30001500, sheet thickness max 8mm, stamping speed 1100 hits/min, max positioning speed x/y 80/160, simultanious 100m/min, Siemens 840D, - scrap conveyor SC1T - Lifting scrap conveyor SC2 - Sheet lubrication, - Tool lubrication - Light guards 5 - safety net LD3000 - GSM Alarm - RS scrap conveyor - Lifting scrap conveyor RSC2 - tool adjust ACS - C1500 sorting belt conveyor - STS 3015 stacking system. - Control type: Siemens Sinumerik 840D - Compressed air pressure min: 6 bar - Power supply: 80 kVA - Operating hours: 45.000 - Number of turret stations (pcs): 20 - Turret rotation: 166 r/min - Axis speed [X axis] max: 150 m/min - Punch diameter max: 89 mm - Axis speed [Y axis] max: 150 m/min - Working area max: 1.500 x 3.000 mm - Punching force: 300 kN - Material thickness max: 8 mm - Material thickness (punching) max: 8 mm - Material thickness ...

Available with 350, 450, 500 and 820 tons cutting force. Continuous work Drive: Electric motor Motor New machine Field of application as follows: -Scrap -Windows and doors made of aluminium and plastic -Alu varieties -Types of wood (pallets, cabinets, industrial wood, more) -Mixed scrap -Bulky waste -more approx. 6 months delivery time after order Further information on request For a written offer, please write an email with your company details and address

Sheet thickness: 3,00 mm void: 0 Table length: 1000 mm Table width: 0 mm Knife length: 0 mm CIDAN - MS-M 10/3,0 Guillotine 1000 x 3,0 mm MACH - ID 6324 Make: CIDAN Type: MS-M 10/3,0 YOP: 1995 Maximum sheet thickness   3 mm Max. cutting length     1.000 mm Strokes on full length   20 mm Strokes in short 1000 length    30 Length backgauge      500 mm Dimensions Length     1.500 mm Width      1.400 mm Height     1.200 mm Weight    1.000 kg

Sheet thickness: 10,00 mm Sheet width: 2550 mm Depth rear gauge: 0 mm MACH-id      6014 MAKE           Darley Holland TYPE             GS 2500 / 10 YOP               1998 SPECIFICATIONS Maximum sheet thickness        10 mm Control          Delem DAC 350 DIMENSIONS Length          3000 mm Width            2200 mm Height           2000 mm Weight           8500 kg

Sheet thickness: 6,00 mm void: 0 Table length: 3000 mm Table width: 3000 mm Knife length: 3000 mm MACH-id    5325 MAKE        HACO TYPE          TS 306 YOP            80 er SPECIFICATIONS Guillotine / Lazer / Cutting table        Guillotine Cutting lenght         3050 mm Maximum sheet thickness      6 mm Backgauge stroke X in mm        0 - 1000 mm DIMENSIONS Length       3600 mm Width         2100 mm Height        2000 mm

Sheet thickness: 6,00 mm void: 0 Table length: 3100 mm Table width: 3100 mm Knife length: 6 mm MACH-id  4149 MAKE       DURMA TYPE         SB 3006 YEAR        2007 SPECIFICATIONS Controll     ENC 100 Guillotine / Lazer / Cutting table        Guillotine Maximum sheet thickness      6 mm Throat       350 mm Backgauge stroke X in mm      1000 mm DIMENSIONS Length    3850 mm Width     3000 mm Height    2000 mm

Sheet thickness: 12,00 mm void: 0 Table length: 3050 mm Table width: 0 mm Knife length: 0 mm MACH-id   3984 MAKE    Amada Promecam TYPE      GX 1230 YEAR     1999 SPECIFICATIONS Guillotine / Lazer / Cutting table    Guillotine Cutting lenght    3050 mm Maximum sheet thickness   12 mm Backgauge stroke X in mm    1000 mm DIMENSIONS Length    3850 mm Width     2380 mm Height      2040 mm  

Sheet thickness: 10,00 mm void: 0 Table length: 3100 mm Table width: 0 mm Knife length: 0 mm MACH-id  3616 MAKE   Promecam France TYPE   GH 1030 Z YEAR  80 er SPECIFICATIONS Guillotine / Lazer / Cutting table  Guillotine Cutting lenght   3100 mm Maximum sheet thickness    10 mm Backgauge stroke X in mm   0 - 1000 mm DIMENSIONS Length   3620 mm Width     2400 mm Height    1800 mm