mobile shear used for sale

Hydr. Sheet Metal Shear Make MENGELE Type S 4 - 5000/3Machine -No: S 2237 5000/3 Year 1976Cutting length: 5050 mmMax. Sheet thickness: 3.0 mmlateral. Discharge: 300 mmCutting angle: 0.6 °Strokes per minute: 34Number of hold-downs: 22mot. backgauge: 0 - 1000 mmlateral. Angle stop: 2000 mmOperating pressure: 230 barHold-down pressure: 58 barOil filling: 200 lDrive power: 11 kWOutside dimensions approx: 5750 x 2500 x 1700 mmWeight approx: 15 tWith- mot. backgauge- Angle stop front- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Sheat metal Shear make EHT type EHS 6-50Machine -No: 19782 Year 1983Max. Sheet thickness: 6.0 mmCutting length: 5050 mmKnife length: 5100 mmCutting angle: 1 - 15 °Knife strokes per minute: 18Number of hold-downs: 26Pressure p. Hold down: 60 barOperating pressure: 280 barOil filling: 220 lDrive power: 12 kWWeight approx: 11 tOutside dimensions approx: 5500 x 2900 x 2100 mmWith- mot. back gauge 1500 mm with length indicator- Cutting angle indicator- Cutting angle adjustment- Cutting length limit- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic sheet metal shears make LOTZE type TS 3000/5machine -No: 2623003 year 1975Technical specifications:Max. Effective length: 3040 mmMax. Sheet thickness steel: 5.0 mmMax. Sheet thickness stainless steel: 3.0 mmOutside dimensions approx: 3750 x 1255 x 1600 mmWith- motor backgauge with handwheel fine adjustment- Cutting length limit- Angle stop front- Table extension- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

McIntyre 320 Shear The well established 320 Shear is a must for any yard and is now recognised as the industry standard for all shears of this type Powerful and high quality One of our most popular shears, the McIntyre 320 Shear has maintained dominance in a demanding market due to its strength, quality and reliability

Hydraulic swing cut guillotine shears make HERA type HSS 3Machine -No: 557 built in 1984heavy, unbreakable all-steel designTechnical specifications:Passage: 1100 mmLarge sheet thickness at 400 N / mm 2.0 mmThroat: 200 mmNumber of strokes: 56 H / minStop length at the front: 1000 mmStop length at the back: 1000 mmMotor power: 2.2 kWWeight about 1500 kgDimensionswith- motorized backgauge- foot switch- front support arms- hydr. Hold-downused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

McIntyre 407 Shear An affordable efficient 407mm (16") blade shear with enough power and speed to handle a wide variety of cutting tasks Robust, affordable, efficient Built originally for scrapyard use, the McIntyre 407 shear is robust enough to withstand the most difficult of working environments. It is now our most popular alligator shear with more than 2000 still in daily use worldwide. The McIntyre 407 is able to handle; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and of course all the usual non ferrous metal separations.

Swing cut sheet metal shears make RAS type 52.31Fabr. -No: 23/7, built in 2000Technical specifications:Cutting range up to: 3100 mmmax.sheet thickness: 2.0 mmNumber of strokes per minute: 37Cutting angle: 0.9 degreesDrive power: 3.0 kWExternal dimensions approx L x W x H: 3580 x 1700 x 1220 mmWeight approx .: 1950 kgwith- CE marking- Angle stop in front- 2 table extensions- foot switch- Single stroke - continuous run- Cut material switch via hand leverwithout back gaugeused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Fully hydraulic curved roller Shear make PARX type KRS 2Machine -No: 3728 Series 61/72, year of construction 1973Shearing power b. 40 kg / mm2 strength: 6 mmShearing power b. 70 kg / mm2 strength: 4 mmProjection between stand and knife: 1050 mmStand opening height: 300 mmmin Curve radius: 75 mmmin. Rondendiam.:290 / 180 mmMax. Rondendrm. from 4-corner sheet: 2750 mmminute Flaring rim: 450 mmMax. Beading height: 50 mmMax. Beading radius: 35 mmCutting speed stepless: 0 - 12 m / min.Power requirement: 6 hpWeight: 1.85 t (without mandrel centering)Outside dimensions: 3000 x 900 x 2000 mm(without mandrel centering)With- full hydr. drive- graduated Speed control- Const. Starting and working torque- Automatic workpiece feed- Contour cutting (cropping)- Circular section- Spiral cut- Beading- with adjustable Thorn centeringused, from operational resolution, in good conditionPrice on request.Deliv ...

Circular shears make PARX / KUNZ type KSM / 2 / schMachine -No: 3756 built in 1975Technical specifications:Shear capacity 40 kg / mm2 4.0 mmShear capacity 70 kg / mm2 2.5 mmProjection 380 mmGuide curve projection 750 mmgr. round square sheet metal 1000 mm gr.Ronde octagonal sheet metal 1250 mm Flare diameter max. 400 mmFlare height max. 30 mmFlaring radius max. 20 mmCutting speed 15/30 m / minDrive power 2.5 / 3.0 kWWeight approx. 2500 kgDimensions 3600 x 500 x 2200 mmWeight approx. 2500 kgWith- automated with hydr. Adjustment of the circle center point guidancefor different diameters and material tension in the center- complete electr. Facility- Inclined lower knife shaft- swiveling control panel- hydr. Infeed of the upper tool for scissors and guide arch- hydr. Guide arc swivel device- various cutting wheelsused, in good conditionPrice on request.Delivery: ex warehouse or  ...

Motorized crank sheet metal shears make FASTI type 507 15-3.5Machine -No: 84517010 built in 1984Technical specifications:Cutting length: 1540 mmmax.sheet thickness: 3.5 mmAdjustment range of backgauge: 1500 mmStrokes per minute: 56Drive power: 7.5 kWWeight approx: 1610 kgwith- Front-operated motor stop with digital display and 1 dimension preselection- foot switch- single stroke - continuous stroke - jogging- Side stop 750 mm- 2 table extensionsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

McIntyre 500 GT Shear The 500 GT is designed for those needing just a bit more blade length without an equivalent increase in price Versatile The 500 GT gives customers just a bit more blade length without a big price increase. It is powerful enough to handle most non-ferrous cleaning and sizing operations, and can also be fitted with an optional bracket enabling it to double up as a catalytic converter shear.

Motorized sheet metal shears make RAS type 83.25Machine -No: 27/10Technical specifications:Cutting length: 2540 mmSheet thickness max.: 3.0 mmNumber of strokes per minute: 50Cutting Angle:1.35°Table width: 430 mmTable height: 750 mmlateral projection: 100 mmRear stop adjustment: 550 mmDrive power: 5.5 kWWeight approx.: 2.5 twith- manual backgauge- manual adjustment of the back gauge from the front with reading scale- foot switch- angle stop- support arms- Tilting roller tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Angle shears make THEIS type 3/30 - 60 H 80Machine -No: 1085/77, built in 1977Sheet thickness at 42kp / mm: max. : 4 mmCutting dimensions max .: 300 x 600 mmNumber of strokes / continuous stroke without load: 92 / min.Stroke: 26 mmKnife angle: 1.5 °Downholder: mechanicallyOpening width between downholder and knife table: 6 mmHydraulic operating pressure: 300 barOil tank: 300 ltr.Connection voltage: 380 V / 50 HzDrive power: 15 kWDrive power conveyor belt: 0.55 kWOutside dimensions approx: 2200 x 2300 x 2200 mmWith- Front table 200 x 500 u. 200 x 725 mmwith adjustable page rash- Back gauge by hand 0 - 500 mm- Cutting gap adjustment- Conveyor belt with scrap switchused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer a ...

McIntyre 600 HD Shear A fast and strong shear with an extended blade and hold down clamp, making it ideal for every cutting and cleaning task including car radiators Extended blade Built at the request of customers looking for a shear with a longer blade to handle larger items such as car radiators, the 600 HD offers more cutting area at less cost. The 600 HD will cut through radiators, for example, in one pass, speeding up processing and improving safety for the operator.

Motor flat bar shears / bar shears make MUBEA type KFS 20Machine -No: 161/23028/420for rectangular cutting of round, square and flat steelMax. Shear cross section: 4000 mmCutting performance flat: 100 x 36 mmor: 300 x 20 mmwith special tool round: 65 mm: square: 60 x 60 mmStroke rate: 40 hpM.Power requirement: 7.5 hpWeight approx: 2450 kgOutside dimensions approx: 1600 x 1200 x 2700 mmWith- Central lubrication- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

McIntyre 600 HD Shear A fast and strong shear with an extended blade and hold down clamp, making it ideal for every cutting and cleaning task including car radiators Extended blade Built at the request of customers looking for a shear with a longer blade to handle larger items such as car radiators, the 600 HD offers more cutting area at less cost. The 600 HD will cut through radiators, for example, in one pass, speeding up processing and improving safety for the operator.

Hydraulic flat steel shears make SANDT type 426 - 72789Fabr. -No: 808407Technical specifications:Knife length: 80 mmcuts steel up to approx: 80 x 6 mmTable size: 350 x 300 mmelectrical connection: 380 V 50 HzExternal dimensions Scissors L x W x H: 200 x 200 x 350 mmOverall dimensions with base and hydraulics: 450 x 360 x 1400 mmWith- Hydraulic compact unit HAWE HC4 / 4,3xa0xa0 1.5 kW, 4.3 l / min, 380 bar- Foot operationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

McIntyre 640-240T Shear A beast of a machine, the 640-240T is strong, reliable and able to cut up to 88mm (3.5") mild steel High capacity Available as an electric or diesel version, the 640-240T is one of McIntyre’s most rugged pieces of equipment and offers more cutting capability than any other shear of its size. The 640-240T can be fitted with solenoid control allowing it to be coupled with infeed and out feed conveyors. Other options include; forced air cooling for hotter climates and an infeed table to facilitate the handling of sheets or long pieces of extrusion (as shown).

McIntyre 640-240T Shear A beast of a machine, the 640-240T is strong, reliable and able to cut up to 88mm (3.5") mild steel High capacity Available as an electric or diesel version, the 640-240T is one of McIntyre’s most rugged pieces of equipment and offers more cutting capability than any other shear of its size. The 640-240T can be fitted with solenoid control allowing it to be coupled with infeed and out feed conveyors. Other options include; forced air cooling for hotter climates and an infeed table to facilitate the handling of sheets or long pieces of extrusion (as shown).

Automatic circular knife trimming machine make ELMA type E 144 RBuilt in 1995 for horizontal trimming of stamped sheet metal partsTechnical specifications:Table size: 1100 x 800 mmmax.sheet thickness: 3.0 / 2.0 mmStroke max .: 100 mmGear ratio of the shafts: 4max.overhang of the flanges on the topruning part: 335 mmAir pressure max .: 8.0 Kh / cm²Power connection: 220 - 380 V / 50 HzDimensions approx: 2000 x 1300 x 1600 mmWeight about: 500 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Maximum cutting length: 3080 mm Maximum sheet thickness during cutting: 6 mm Maximum cutting angle: 2 st Total power requirement: 11 kW Rear stop: 1000 mm Machine height: 1950 mm Machine length: 4100 mm Machine width: 2050/3650 mm Machine weight: 7980 t

BOSCHERT G CUT 2504 CNC guillotine shears were manufactured in 2014 in Germany. The guillotine is designed for cutting metal sheets with a maximum length of 2600 mm and a thickness of 4 mm (mild steel st42) or 2 mm (stainless steel). The sheet metal is held in place by 13 hydraulic clamps and, thanks to the installed CNC controller with touch panel, it is also possible to store many different work programmes, making the machine very useful and versatile. After entering the parameters of the steel sheet to be cut, the controller automatically sets the cutting gap, choices the angle of the upper knife and the appropriate pressure force and then starts the cutting process. The guillotine is also equipped with, among other things: a foot control to facilitate the operator’s work, light curtains to prevent a worker from entering the working area of the machine and an automatic metal shee ...

cutting effort 1000t the number of strokes (no load) 17 /min course a support of the blades 140mm Max. cutting diameter of rounded workpiece, mm 190 Max. cutting diameter of squared workpiece, mm 180 for 450 N/mm2. Machine weight, kg 60000

cutting effort 800t the number of strokes (no load) 20 /min single strokes 16 /min course a support of the blades 125mm Main drive motor 55 kw in 1475 rev / min cutting power Strength of the material Tensile N/mm2 450 500 600 700 800 900 N/mm2 square mm 160 150 132 118 106 100 round mm 170 160 140 125 112 106 strip steel 425x 67 60 53 47 42 38 320 x 80

Max shearing power: 500 ton Max speed: 40/1 min Stroke: 100 mm Single stroke: 25/1 min Square: 125 mm Max round: 132 mm Length of blades: 420 mm Main motor power: 45 kW Height above floor: 3500 mm Weight: 23 ton

course of the blade slide 100 mm number of moves at idle position 25 / min Main drive motor 30 kw in 1480 rev / min cutting power Strength of the material Tensile N/mm2 450 500 600 700 800N/mm2 square mm 125 118 105 95 85 round mm 132 125 112 100 90 flat 375x 60 45 40 35 32 Weight 23,000 kg (50,692 lb) Length x width x height 1850 mm × 2450 mm × 3750 mm

Mecanica guillotine shear Arrieta CGM 10/2. Typing clutch. Sheet metal length: 1050mm. Sheet metal thickness: 2mm. Rear stops. Power: 1.5hp. Ce. Year: 2001

Ladies and gentlemen, we offer: Alligator scissors shepherds: Type: Proto III Drive: 18.5 KW Number of cuts per minute: 22 Measuring opening Knife tip: 310 mm Knife length: 810 mm Weight: 6.8 tons Machine has been overhauled. Control cabinet renewed

ERMAK CNC HVR 3100 x 13 hydraulic guillotine shears built in Turkey in 2008, are designed for cutting workpieces made of among others mild steel or stainless steel. The metal sheet with a maximum length of 3100 mm and a maximum thickness of 8 mm (plain steel) or 13 mm (stainless steel), is held during machining by 14 hydraulic clamps. The angle of the cutting blade can be freely adjusted in the range from 0.5° to 2.0°. Full control over the operation of the CNC HVR 3113 machine is guaranteed by the control panel located on the guillotine shears body with installed CYBELEC DNC 60 CNC controller, allowing programming of many different machining processes. The guillotine shears is equipped with among others new cutting blades and a foot control pedal, making the operator’s work much more comfortable and simple. The total weight of the machine is 13400 kg. The total weight of the mach ...

Sell a table scissors, which was used exclusively for plastic cutting. Manufacturer RAS Type: 50.20 Space requirement 2.5m1.1m1.6m High Cutting length 1020mm Nmyhr Cutting thickness 1.25mm Weight 220kg

Manufacturer: Mc Intyre Knife length: 508 mm Opening of measurement: 250 mm Cutting capacity: 120 tons Round iron ST 37: 67 mm diameter Number of strokes at 1/4 opening: 100 per minute Number of strokes at full opening: 20 per minute Dimensions ( L x W x H ): 1650 x 915 x 1490 mm Weight: 1143 kg Drive: 7.5 kw / 400 V Operation: foot pedal Alligator scissors JMC 500 HD The JMC 500 HD has a hydraulic holder. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket.

Alligator scissors JMC 640-240 with hydraulic holder (Used machine) The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Manufacturer: Mc Intyre Knife length: 640 mm Measuring opening: 355 mm Cutting capacity: 240 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 opening: 60 / min Dimensions (LxWxH): 3200x1000x1800 mm Weight: 4000 kg Drive: 18.5 kw /400 V +1.5 kw Electric motor cooler Operation: foot pedal

SAY-MAK TAFELSCHERE TYPE SRGM 1360 - Capaciteite 1360 x 6 mm - Achteraanslag - Plaathouders voor - Voetbediening - Noodstop - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS TAFELSCHERE TYPE OGM 1050 x 1.5 - Capaciteit 1050 x 1.5 mm - Achteraanslag - Weight 450 kg DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

SAY-MAK TAFELSCHERE TYPE SRGM 1360 - Capaciteite 1360 x 6 mm - NC achteraanslag - Small knipped plaat wordt automatically aan de voorzijde van de machine uitgeworpen - Plaathouders voor - Voetbediening - Noodstop - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Scissor knife for table scissors . Shear knife. Knives.

Technical data: - Knife length 150 mm - Special knives for processing thin sheets - 2 pcs material tensioner - mounted on sliding table - Table height 1000 mm - Space requirement approx. W 800 x H 1300 x D 800 mm - Weight approx. 100 kg

Max shearing power: 315 ton Stroke: 70 mm Single stroke: 30/1 min Square: 100 mm Max billet cut : 106 mm Main motor power: 20 kW Weight: 14 ton

Cutting length 3050 mm Sheet thickness 4 mm Engine 7.5 kW Dimensions 3700x1600x1600 mm Weight approx. 4650 kg

High-quality, PLC-controlled circular shears / circular, blank and flange ring shears with punching device used - refurbished PLC – Control for 120 cutting programs with 30 program sets each Projection in tailstock 1,000 mm Automatic tailstock clamping Outreach in the shear station 400 mm Shear performance 0.5 to 5 mm sheet steel 400 N/mm² 0.5 to 3 mm stainless steel sheet 650 N/mm² Largest shearable disc diameter Ø 1,400 mm for rectangular starting material Ø 1,800 mm for octagonal starting material Smallest shear diameter 150 mm Diameter Ø shear knife 100 mm Shear rate up to 35 m/min punching diameter at S = 2 mm sheet steel 400 N/mm² - Ø 25 mm at S = 3 mm sheet steel 400 N/mm² - Ø 17 mm Drive power 7 KW Weight 1.300 kg Dimensions 2.7 x 1.8 m x H 1.7 m Optionally available with a flanging device – Maximum board height 20 mm Large ...

NC - controlled mechanical sheet metal panel scissors in backdrop cutting design, maximum cutting length 1,050 mm, maximum cutting capacity 4 mm steel sheet/ST40, cutting angle 1.5°, NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections lower than 1,000 mm - optionally available with a foldable sheet support at the rear stop or a conveyor belt with upliftrs, drive power 5 kW, weight approx. 2,500 kg

Hydraulic sheet metal shears in backdrop cutting design with NC - controlled rear stop - manual cutting angle adjustment and hydraulic cutting gap adjustment, maximum cutting length 3,020 mm, maximum cutting capacity 8 mm steel sheet/ST40, cutting angle 0.5° to 2° NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections deeper than 1,000 mm - optionally available with a foldable sheet metal support at the rear stop or a conveyor belt with high-stop strips, drive power 11.5 kW, dimensions 3.6 x 1.2 m, weight approx. 7,600 kg

We supply round and flange ring shears (circular shears) in two sizes - 3/1300 and 5/1800 Our KS circular shears are PLC - controlled hydraulic - electromechanical machines designed for the production of rounds and flanges made of steel sheet, VA stainless steel sheet, Aluminium and non-ferrous metal sheet, maximum shearing performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 3 mm or 0.5 mm to 5 mm, smallest / largest cutable circular board 150 mm / 1,300 mm or 1,800 mm respectively – cutting speed up to 35 m/min, drive power 5 kW or 7.5 kW, weight approx. 2,000 kg and 3,000 kg

Mechanical manual sheet metal shears of excellent quality, for the burr-free precision cutting of fine sheets up to 1 mm sheet thickness steel sheet/ST40 – aluminium 1.2 mm, backdrop-guided knife beam, maximum cutting length 3,080 mm, cutting angle 1.5°, manually operated rear stop with 750 mm travel range - +/- 5 mm slantable for conical cutting, optional with sheet metal high-holding device and automatic tipping device for the sheet metal cuttings in the section collection trolley, scissor table height 800 mm - scissor table width 300 mm - scissor table support width up to 480 mm, dimensions 3.55 m x 1.6 m x H 1.3 m, weight approx. 790 kg

PLC - controlled round and flange ring shears (circular scissors) This can also be expanded into a combined circular scissors - flange machine. We supply the machine in semi-automatic design and as a fully automated production island. Rounds and flanges (sheet rings) made of steel sheet, VA stainless steel sheet, aluminium and non-ferrous metal sheet can be cut, maximum shear performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 12 mm, smallest / largest cutable circular board 500 mm to 2,200 mm – cutting speed up to 25 m/min, drive power 15 kW, weight of the base machine

swing beam Cutting length: 4100 mm Max sheet thickness st 45: 6 mm Backgauge: no backgauge

Hydraul. Table scissors, used, ready for demonstration under electricity       hydraulic plate shearer, used , under power, ready for operation Type: XTSL 3016 Fabr./ make : Atlantic Year of construction/ year: 1993 Sheet thickness with the largest sheet width/ thickness at max. cutting length: 16 mm ( structural steel / mild steel ) 12 mm ( stainless steel / high grade steel) Cutting width/ cutting length: 3100 mm Weight/ weight: approx. 14 t Specification: Rear stop / backstop

LVD MVN 3100 x 6,35 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Backgauge: no backgauge