mob used for sale

Technical data: Fruit wash, grind, pressing then the juice pasteurization and bag-in-box packaging pour performance up to 750 L/h incl. mounted hydraulic large box emptying wash grinding plant Kreuzmayr KWEM 1000 cover press Kreuzmayr KEB 500 Pasteur Kreuzmayr PA 750 oil bag-in-box fillers Kreuzmayr CBF 900, incl. 6-digit series bottling juice pump, strainer, 2 PCs. juice buffer tank 220 litre stainless steel base frame, Tandem chassis with tyres 195/50-10 plan building with gas spring lift for the two side walls, roll-over tarp back 4 PCs. crank rotating supports for the horizontal alignment of the System cleaner, air compressor and complete piping fix established

Two (2) Surplus/Never used, Mobile Substations 25/30 MVA, 115/13.8 kV. 60 Hz. 3 Phase, with ODTF1/ODAF2 cooling, YNd1 Connection, Cooper Windings, on a low bed chassis trailer, HV Surge arrester, High Capacitive Voltage transformer, 145 kV Hybrid Switchgear, Outdoor Circuit Breaker Roof Bushing, Control and Protection Panel, Battery Charger, Batteries and all the auxiliary equipment for this substation.

1 piece used FULL MOBILE CONCRETE MIXING PLANT SBM / SIMEM SMM 100 Year of construction 2007 Performance: 100 kbm/h Mixer unit Mixer SIMEM MSO 3000/2000 Additive dosing unit 2X 12.5l Cement scale 1200kg water dosing unit 600l Row silo / aggregate storage unit / compartment batcher Weighing belt 5000kg Aggregate/aggregate boxes: 4 X approx. 38.5 kbm Cement silos 4 X approx. 80 ton Fully automatic Dorner control Installed in a container Additive storage Installed in a container System is in a technically well-maintained and fully functional condition. Location: Austria Available: IMMEDIATELY Price: on request price net , ex location without guarantee and/or warranty, mistakes and/or false representations reserve, selling in current state – standing or recumbent, subject to prior sale

New plastic handles for drawers, tool cabinets, etc. 380 pieces. Partially original packaged. Price reduced VS €/piece

Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...

cheese press stainless steel very good condition, been apparently very little used for sliced cheese such as Gouda designed for various sizes approx. 1 kg - 8 kg Special cheese sizes are possible by simple modification

To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm Max 700 x 2,500 mm

FINLAY / TEREX 390 HydraScreen, screen / screening, Deutz engine, including additional belts, German Machine, 5.150 h, year 1996

ID3522 Semi-mobile screening plant for dry classification consisting of: 17 m³ feed hopper with bar sizer, mobile and pivoting AA 30 m conveyor belt, double-deck screening machine (screening area 2 x 16 m²), various conveyor belts (discharge belts, ascending belt, sand conveyor, oversize belt, product belt), control cabinet (built in 2021) Semi-mobile screening plant for dry classification consisting of: 17 cbm feed hopper with bar sizer, riser belt movable and swivelling AA 30 m, double-deck screening machine (screening area 2x16 sqm), various conveyor belts (discharge belts, riser belt, sand belt, oversize belt, product belt), control cabinet (year of construction 2021)

Machine type TIG inverter welding system gas-cooled DC system Make Merkle Type MobiTIG 190 DC Connection voltage 1 x 230 volts Adjustment range 5 - 190 ampere Switch-on time 20% ED at 180 amperes 100% ED at 90 amperes Current adjustment infinitely variable max. weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 355 x 160 x 275 mm Weight 9 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG burner 4 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare part box kpl. Equipped 18 month warranty 1 piece user manual New price €1,590.00 + VAT Price kpl. wi ...

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Plant No. 123.035 Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 2 years Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon w ...

Hydraulic mobile tin hole punch for e.g. control cabinet construction and control construction Manufacturer Alfra Type SKP-1 Punches holes of max 140mm diameter in 3mm sheet metal Round, square and rectangular stamps possible. Punch punch punch tin punch drill tin hole drill monocut gap-plate-hole, hand hydraulics, ball bearing screw, Klauke Alfra Special price

Complete clean air extraction system with briquette press and piping with gate valves, etc. Extraction system for woodworking companies with briquetting press undermounted. Aspirator ALKO Type: MOBIL-JET 250 Year of construction 2003 Extraction diameter 250 mm Nominal capacity 4900 m³/h Motor power 6.5 KW Dimensions approx. 330 x 135 x 2.95 cm with suction control for automatic slide control. Briquette press WEIMA/ ALKO Type: APC30S Year of manufacture 2007 Motor power 5.5 KW Pressing capacity 30 - 50 kg/h Briquette diameter approx. 50 mm incl. complete piping with branches, bends, valves. there would be another batch of extraction pipes with fittings, which can be purchased cheaply. Plant has been dismantled and packed ready for loading. Condition see pictures, or follow the item description. Parts can also be picked up ...

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 12 months Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon with 2 pressure gau ...

Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 180 K Connection voltage 1 x 230 volts Adjustment range 25 - 180 amperes Switch-on time 20% ED at 180 amperes 60% ED at 110 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 2-wheel transmission Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special accessories ColdMIG welding process E-welding, MIG soldering Filling wire welding Weight 17 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-200 coil, 5 kg 1 can  ...

Machine type MIG/MAG inverter welding system with bi-power setup Make Merkle Type MobiMIG 280 K - BiPower Connection voltage 230/400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Bi-Power Setup Weight 27 kg Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reduc ...

AUTEL ADAS MaxiSYS MA 600 Mobil Full Kit Manufacturer: AUTEL (autel.com) MA600 ADAS Calibration System with Mobile Calibration Frame and Diagnostic Systems Procurement according to invoice: May 2024 Condition: Very good Autel's MA600 portable, mobile ADAS calibration system includes a collapsible aluminum calibration frame, various line, centering, and alignment lasers, laser-assisted reflectors, and a lane departure assistant calibration target (LDW) for vehicle camera system calibration. The MA600 is compatible with almost any diagnostic tablet. AUTEL ADAS MA 600 Mobil Full Kit according to the invoice of May 2024 consisting of (see pictures for details) : - Autel MA 600 FULLKIT with mobile calibration frame - Autel MA 600 BAG (bags for mobile calibration frames) - Autel reflector CSC0602/01 with mirrors and case - Autel mounting plate MA 600 RAP - Autel ITS 600 with ...

Machine type Electrode inverter welding rectiveror with bi-power setup Make Merkle Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Adjustment range 20 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes 100% ED at 210 amperes Current adjustment infinitely variable max. weldable material thickness 7 mm Cooling inverter by built-in fan Version of portable assembly line Special accessories Bi-Power-Device Fuse 16 Ampere Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 5 years Condition workshop-tested, good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with  ...

Kuka Robot KR6 R700 sixx, Mobile SZ AGILUS V2 Year of construction: 2016 Reach: 706 mm Weight: 50 kg Payload: 6 kg Kuka KRC4 compact controller KUKA. SystemSoftware KSS SR 8.2 Kuka SmartPAD 1.0 Kuka connecting cable 7m Dimensions 900 x 1200 x 1850mm Weight 295kg Ideal for training or trade fair

storage positions: 90 Boxen weight: 21 kg dimensions: 670 x 520 x 1330 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 675 x 510 x 880 mm weight: 56 kg : 5 St. Professional tool trolley for workshop equipment. Internal dimensions of the upper 4 drawers 56 x 43 x 10 cm. Inner dimensions of the lower drawer 56 x 43 x 17 cm. Dimensions of the wheels 100 x 30 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Type Electrode Inverter Welding Rectifier with bi-power setup Merkle brand Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Setting range 20 – 280 amps Duty cycle 35 % ED at 280 Ampere 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable weldable material thickness 7 mm Cooling inverter by built-in fan Special accessories Bi-Power setup Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 6 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece of ...

range L-W-H: 490x310x190 mm weight max. in kg: 20 kg Temperature range: -10° +50° °C Colour: grün RAL material: PST AU Lot storage stackable by lateral and rear tongue and groove can be connected to each other approx ca. 700 pieces in Stock Packing unit: Pallet Exception, for small quantities only if you pick them up yourself in Goldenstedt. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diesel tank system, diesel tank, gas station, fuel tank system -for: diesel, heating oil -Mobile -with: electric motor pump -Delivery rate: approx. 30 l/min -Liter display clock -Content: 800 liters -Dimensions: 1500/800/H1480 mm -Empty weight: 310 kg

GE mobile X-ray machine VMX • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany and can be picked up immediately. • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation and configuration of the system or the system components must be carried out by a specialist or technician authorized by the manufacturer!

Paint mist extraction mobile with 3 meters flexible slauch

External extraction 0.37 KW 380 V 16 A 3 ports Length 40 cm Width 50 cm Height 84 cm

Recycling machine trade AGICOM-Pedergnana OG: The battery-powered cutter has been specially designed for applications where more freedom of movement is required, to carry out cutting operations in hard-to-reach places or when it is important that the cutter must be ready for use in standby mode in case of emergency. Battery-powered cutters are made of high-quality aluminum. The HOLMATRO cutter model ICU 10 A 10 is particularly suitable for cutting telephone cables, underground cables, electrical cables and steel cables. Specifications: Maximum cutting force: approx. 242 kN, approx. 24.7 tons Maximum opening width: 115 mm Maximum operating pressure: approx. 500 bar Dimensions: L 737 x W 222 x H 177 mm Weight: 17.3 kg

Sensor, Probe, Immersion Probe, Float Switch, Magnetic Switch, Magnetic Float Switch -Manufacturer: KDG Mobrey, magnetic float switch ovp -Type: S179DB/F83 -Number: 5x float switches available -Price per piece -Dimensions: 405/120/H110 mm -Weight: 2.9 kg/pc.

• Stirring volume max. 200 l • Stirring speeds 100-1,000 rpm • Mounting plate 180 x 180 mm • Effective power 80 W • Max. Shaft torque 50 Ncm • Control unit Cimarec Telemodul 40 M (stirring start, stirring time, speed) • Mounted on a mobile stainless steel frame with inclined mounting plate with counter support (format part) for mounting a vessel with Ø 235 mm • Drive 230V/50-60Hz

Transport trolley, order picking trolley, Corlette, furniture transport trolley, roll container, furniture Corlette -Manufacturer: Cordes, Furniture transport trolley - Corlette -Type: Folding and collapsible design -Load capacity: approx. 600 kg -Number: 11x transport trolleys available -Price: per piece -Dimensions: 2020/1150/H1800 mm -Weight: 91 kg/unit

Stockpile conveyor 21 m Belt width 650 mm troughed Manufacturer: Polxmair Frame made of square tubing Drive 2.2 KW Can be dismantled, everything is screwed Camp Saxony-Anhalt Price ex farm

Edge Press Hess Type mobil 3000 Machine No. M 2 2791 1538 Year of manufacture 1991 Working length 3000 mm Pneumatic Banding width 60 mm Pressure range 0 – 8 bar 6 press cylinders, pressure plate 120 mm diameter Mobile on castors Heavy version Heating element 0 – 200 °C Solid edge preheating device Length 3200 mm x width 850 mm Weight approx. 450 kg

; Gross weight [kg]: 670; Engine: Battery System: LiFePO4; Accessories: Battery, Control Panel, AC output sockets: 2x 32A (1 for parallel), AC Input sockets: 1x 15kW, DC input: 1x 30kW

Machine Type: MIG/MAG Inverter Welding Machine Make Merkle Type MobiMIG 180 K Serial No. 89.754 Connection voltage 1 x 230 Volt Adjustment range 25 – 180 amps Duty cycle 20% ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner gas-cooled Portable assembly system design Wire Feeder 2-Roller Gearbox Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special Accessories ColdMIG Welding Process E-welding, MIG soldering, cored wire welding Weight 17 kg Age 12 years Condition workshop tested, very good incl. UVV workshop test report Scope of supply welding system with the following accessories: 1 piece of welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick sp ...

We are offering for sale a complete mobile screen plant with trailer : Trailer Type: ZAL 4PA Towing capacity: 47,000 kg Own weight: 8,600 kg Conveyor Belt Type: ML-Band Year of Manufacture: 2012 Screen Type: SEWU 2400 x 5000 Year of Manufacture: 2012 Find more here - / Contact us at -

Manufacturer: Hess, Type: Mobil Kantenbügelpresse, Min.-max. workpiece height in mm: 60, Pre-warming of massive edges and heating rod: yes, Working length mm: 1.100, Working widht mm: 1.100, Carriage: yes, Tiltable design: yes, Cylinder: 2,

Machine Type: Electrode Inverter Welding Rectifier without bi-power device Make Merkle Type MobiARC 284 cel Appendix No. 103.101 Connection voltage 3 x 400 volts Adjustment range 20 – 280 amps Duty cycle 35% ED at 280 amps 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable max. weldable material thickness 7 mm Cooling inverter through built-in fan Portable assembly system design Fuse 16 Ampere Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 9 years Connection for hand and foot remote control Condition workshop tested, very good, incl. UVV test protocol Scope of supply welding system with the following accessories: 1 piece of electrode cable 1 piece ground cable 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 pcs rod electrodes ...

: 6 St. weight: 12 kg range L-W-H: 990 x 400 x 870 mm Tool trolley with 6 storage boxes Dimensions of the containers 26 x 40 x 16 cm. Internal dimensions of the containers 23 x 35 x 15.5 cm. Equipped with four wheels, two wheels with brakes. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air volume flow: 4500m³/h, max. negative pressure: 3400Pa, motor power: 4kW, filter area: 42m², number of filters: 3, machine dimensions X/Y/Z: approx. 2050mm/1050mm/2050mm, weight: approx. 350kg. Documentation available. On-site inspection is possible.

Mobile pipe layer, self-sufficient: You can find exposé, pictures and videos on our homepage The Mobile Factory is a stationary system originally developed for welding and laying pipelines. Thanks to its crawler chassis, this system can follow the work progress or be deployed on different terrains as needed. In principle, there are no limits to its application areas. Thanks to pre-installed facilities such as electricity, compressed air, hydraulics, lighting, a recreation room, an incineration toilet, a kitchen, and generators, the Mobile Factory is completely self-sufficient. It can therefore also be used in connection with basic services such as pipeline construction. It can also be used as a workshop, production facility, development center, research station or similar. Technical specifications: 1. Mobile Factory complete: 2. Basic module: Highlights: - Pipe magazine for 8 pipes up t ...

Omron LD90 mobile robot

Semi-automatic bending, pipe bending machine, mandrel bending machine MOBITEC type BAH 1-2KOTTMANN and BERGER GmbHFabr. No. 056 Year of construction 09/2004- for simultaneous bending of two pipe sections made of steel up to 12 mmBending angle max. 90Pipe diameter max. 12mmMandrel length approx. 65 mmNominal power 3.5 kWDreturn air max. 6 bar / approx. 1 litre per bending cycleMains connection 400 volts, 50 Hz- Pneumatic clamping- Pneumatic mandrel retraction- Control for angle input via STOBER Controlbox Series 4000/5000- Control SIEMENS

table length: 1200 mm table width: 800 mm weight: 153 kg With the new mobile lifting table from Siegmund you can get there quickly and easily to the ideal working height. Set new standards in ergonomics as well Flexibility and benefit from the wide range of possible uses. The stable steel construction offers stability even during the Adjustment of the working height. Maximum load capacity including perforated plate 500 kg Working height between approx. 700 and 1,000 mm including 16 hole plate: - through hardened tool steel X8.7, - plasma nitrided and BAR coated - Hole Ø 16 mm - Holes surface 50x50 mm grid - Material thickness 12 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm weight: 177 kg With the new mobile lifting table from Siegmund you can get there quickly and easily to the ideal working height. Set new standards in ergonomics as well Flexibility and benefit from the wide range of possible uses. The stable steel construction offers stability even during the Adjustment of the working height. Maximum load capacity including perforated plate 500 kg Working height between approx. 700 and 1,000 mm For clamping on Premium Light with a clamping bolt if the spacer ring article no. 280653.N required. including 28 mm perforated plate (light): - Premium Light - through hardened tool steel X8.7, - plasma nitrided and BAR coated - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Material thickness 15 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A mobile pallet racking system BITO is available. Upright type: P20, compartment distance FA1/FA2: 1725mm/1725mm, bay width 1/2: 2700mm/3600mm, beam type 1/2: PT27.82LN/PT36.127LN, load carrier: Euro pallet, dimensions X/Y: 1200mm/800mm, weight: 500kg, max. compartment load: 1500kg/2000kg, max. bay load at 1725mm buckling length: 12000kg/16000kg, top storage level: 5175mm+215mm, max. carriage load: 120000kg, mobile racks: 6, carriage depth: 2650mm, carriage length: 27966mm, transfer carriages: 2, max. travel speed: 4.5km/h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026.

fire: SCM Technology, model: CM 1200 Mobile, Year of construction: 2010, Length: 11.000 mm, Width: 2.700 mm, box: 8.000 mm, Engine: Diesel engine, Cutting: 1000 x 900 mm, Stamper: 1 x 200 tons, General conditions: working, Cutting force: 1200 tons, Weight of machine: 53 tons