136,836 used machines on RESALE, but how to find them? Machine Search
Debotec A-50 mixer Serial: 1215 Stainless 50Kg mixer, tipping bowl to discharge,
Mixer 200 liters - NEW Hopper capacity: 200 l Two levels of hoper Two working shafts with paddles Power: 2.2 kW Dimensions L/W/H– 1400/750/1250 Weight: 300 kg
Type: MIX MAXI Mix volume: 450 liters Two mixing shafts with paddles Stepless speed regulation Programmable operation One outlet, mechanically operated Protective cover of hopper Lifting device for standard trolley 200 l Machine dimensions in сm: Width: 100,0 (190,00 with lifting device) Length: 180,0 Height: 220,0 Power: 5,5 kW Voltage: 380 V, 50Hz
Hooper capacity: 900 l Two working shafts with paddles Front discharge of ready product in 200 l trolley Pneumatic opening of covers Automatic stopping when cover is open Loading unit for 200l trolley Smooth regulation of speed Setting of working time Voltage / Frequency: 400 V /50 Hz /3 phasses Installed power: approx. 11,0 kW Control voltage: 24 V DC Machine dimensions in mm. (with column loader): Width: 2 129,0 Length: 2 189,0 Height: 2 745,0
VACUUM MASSAGER, INJECT STAR TYPE: MAGNUM 2600 Technical description: Serial number: 3730 Capacity: 2600 l Power supply: 380-440V/50-60 Hz, 3ph Power: 7 Kw Tumbler dimensions: 1300 x 2450 mm Dimensions: 3270 x 1850 x 1900 mm With this machine you are in a position to massage meat at any time, fully automatically and at maximum, so that the general appearance and flavour is improved, as well as the structural loosening up of the meat and the essential assimilation of both the natural juices and injected brine, by binding in, is achieved. HOMOGENEOUS BRINE DISTRIBUTION Sealing-in of Protein: The binding of the surface cells, seals off the inner moisture and prevents drying out. Optimum Protein-Water-Ratio: Whether you massage ham, shoulder, loin, tongue, belly, brisket or rough and fine fillings for cooked, boiled, raw and preserved sausage, whole chickens or chicken parts, fish or othe ...
Stock # U2423-1 Used stainless steel conical nauta type powder mixer by Pharming type HV 1000 (CZ). Cone has diameter 1550 mm x height 2200 mm. Total volume of tank about 1700 l, working volume up to 1000 l. Total height 324 cm. Standard mixing screw is top driven by el. motor 3 kW, 970 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 330 cm x diameter 170 cm x weight approx 1000 kg. Machine had been working in food industry.
Stock# U2423-2 Used stainless steel conical nauta type powder mixer by Pharming type HV 600 (CZ). Cone has diameter 1440 mm x height 1855 mm. Total volume of tank about 1300 l, working volume up to 600 l. Total height 2770 mm. Standard mixing screw is top driven by el. motor 3 kW, 965 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 277 cm x diameter 180 cm x weight 600 kg. Machine had been working in food industry.
Continuous Mixer (UP1) Manuf.: Pomini Farrel Year 1982 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW Continuous Mixer (UP2) Manuf.: Pomini Farrel Year 1986 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW
Farrel Bridge Lab BR Mixer Steam / water pressure gauges Burrell process timer BHI control Capacity of chamber 1.6 litre Motor With Gearbox
All stainless steel Hopper capacity - 450 litres Two working shafts with paddles Loading unit for 200l trolley Vacuum pump BUSCH - 21 m3 Touch screen MITSUBISHI” Power – 6.2 kW Machine dimensions in mm without loader – 1900/1050/1730(2250) Weight - 950 kg Loading unit dimensions in mm - 1100/1200/2500 Loading unit Installed power - 0,8 Kw
Used stainless steel ribbon mixer, volume 180 liters. Ready for operation.
Mixing volume: 900 liters Year of manufacture: 2023 / New machine / Stock machine CE mark: yes 2 paddle shafts Front outlet with pneumatic flap control pneumatic protective cover with safety shut-off incl. mast loading for 200 litre cutter wagon Infinitely variable mixing speed adjustment Mixing time preset Voltage: 400 V / 50 Hz. / 3 phases Connected load: 11 kW Control Voltage: 24V DC Frequency converter / touch control: Mitsubishi approx. dimensions in mm with load Latitude: 2.130 Length: 2.200 Height: 2,750
Used drum mixer made by ,,IWS” INOX WELDING SERVICES, 1000 L capacity. Stainless steel. New: 2022 Drum mixer for bulk and granular materials. 2 pieces available.
Mixer for granules and powdered products Mixomat. Completely in stainless steel. Mixing tanks on load cells. Tegiloxane pump. Vacuum pump AZO 5.5 kW. Granulate gate valve NW 100.
Mixers for plastic granules and powdered products. Completely in stainless steel. Mixing motor 4 KW. Mixing chamber with separator on load cells. Pre-tank on load cells. Vacuum pump AZO 4 kW.
Continuous mixer, single-shaft mixer, trough mixer for bulk materials used Manufacturer: AVA-HUEP GmbH Type: HTK 2100 Year: 1999 Capacity 2090 l Temp max 80°C Mixer approx. Ø 900 x 2900 mm Outlet approx. 600 x 360 mm Drive with geared motor 55 kW RPM 380/660 V Dimensions Total approx. 6000 x 2000 x 2000 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
Z Blade Stainless Steel Mix Extruder Manufacturer: Winkworth Model: 14Z HMX Working capacity 22-25 litre Approx total volume of trough litres: 32 litre with Hasco Hydraulics Ltd power pack With Panel YOM Jan 89
Suitable for the mixing of pre-cut meat and fat with salt, nitrite salt, spices or additives for the production of burgers, ground meat, sausage, nuggets, kebab, various types of dry sausage, vegetables, cheese products and many more. The two mixing shafts with separate motors are independently switchable forward and reverse, at high and low speed. As standard the mixing shafts are equipped with paddles and partial spirals enabling a fast emptying.
REF-2366 TATOMA MT-13-E HORIZONTAL UNIFEED MIXER 6000KG WITH LOAD CELLS Horizontal unifeed mixer for solids with load cells Manufacturer: TATOMA Type: MT-13-E Serial no.: 1000 Year: 1998 Capacity: 6,000 kg Volume: 13 m3 ABB motor: 75 HP/55 kW. 1,500 rpm Tank dimensions: length 4,450 mm, width 1,780 mm Outfeed height: 700 mm Overall dimensions: length 6,500 mm, width 2,300 mm, height 2,700 mm CE marking
Used stainless steel conical mixer for bulk materials type MR-05. New 2015. Capacity 3000 L Rotational speed of screw 320 rpm, Power 5,5 kW, Total weight 500 kg.
Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 25.000, -Usable volume approx. 22,500 liters - Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified
Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 44.000, -Usable volume approx. 36,000 litres -Max product weight : 27.500 kg -Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified
Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 44.000, -Usable volume approx. 36,000 litres -Max product weight : 27.500 kg -Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified
1967 Maschinenfabrik Gustav Eirich DZ 2 Compulsory mixer 1500 L Manufacturer: Maschinenfabrik Gustav Eirich Type: DZ 2 Baujahr (Year of Manufacture): 1967 1973 Maschinenfabrik Gustav Eirich Compulsory mixer 2500 L Year of Manufacture: 1973 Weight: 4500kg There is a material elevator available for each one. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Tatham Twin shaft paddle mixer Serial: CO1040 Stainless, 1200Kg twin shaft paddle mixer, New motors, new gearbox, new chains, with stainless holding hopper at base
Used stainless steel cube mixer, made by Paasch, type: F 31. Total capacity 3500 liters.
VERTICAL MIXER, 10 m3 capacity, total height approx 5.400 mm including transmission group, max Ø 2.300 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 11 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, Possible additions: horizontal loading screw and hopper + cyclone on top + collector with dust sleeves piping + bag holding structure+bag weighing station + PLC fo ...
CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 7.750 mm including transmission group, max diam. 3.000 mm.(exceptional transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle type, N.1 loading hopper with conveying screw ...
VERTICAL MIXER, 5.000 lt.capacity Total height approx 5.000 mm Max diam. 1,850 mm. Constructed in painted electro- welded carbon steel. Inner auger diam.280 mm. Loading hopper with safety grid and sampling shutter, 600 x 500 mm. Pulley and belt transmission, protected by carters Inspection door with safety limits, Cleaning hinged door on bottom of cone for complete discharging, with safety opening Side discharging pipe to big bag with valve at 1.000 mm from ground Bottom discharging pipe propeller type max level indicator automatic greasing kit 7,5 kw electric motor Complete with control panel. Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V CE compliance and instruction manual, installed power - used power in work: about 60-65% : 7.5, capacity: 5.000 lt.
3,0 m3 capacity Total height approx 4.000 mm Max diam. 1.600 mm. Constructed in painted electro- welded carbon steel. Inner auger diam.280 mm. Loading hopper with safety grid and sampling shutter, 900 x 740 h 830 Pulley and belt transmission, protected by carters Inspection door with safety limits, Cleaning hinged door on bottom of cone for complete discharging, with safety opening Side discharging pipe to big bag with valve at 1.000 mm from ground Bottom discharging pipe propeller type max level indicator automatic greasing kit 5,5 kw electric motor Complete with control panel. Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V CE compliance and instruction manual, installed power - used power in work: about 60-65% : 5.5, capacity: 3.000 lt.
VERTICAL MIXER, 8 m3 capacity, total height approx 4.500 mm including transmission group, max Ø 2.200 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 11 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power - used power in work: about 60-65% : 11
CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...
Our VERTICAL MIXER 5 to 30 m3 are used to blend different batches of one material and grant a more homogeneous quality within one lot., Please see our attached [PDF](drive.google/file/d/1kQKOuxvrbrpfSZBrVxh2jrXbJ7StrQMp/view?usp=d rive_link) and photos for different sizes availables., Another important task they are used for, is to complete cooling of materials after a heat related process, like regranulation or agglomeration, in order to avoid the possibility that materials, due to residual heat, clog into lumps., Our standard mixers for plastic materials are constructed in sturdy electro-welded steel, painted on the outer surface with an anti-rust layer and a protection coating. Installed in a sheltered, dry place they will perform at their best for years ., - inner auger diam.350 mm., - lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600 x ...
USED VERTICAL MIXER, constructed in sturdy carbon steel, Total height 3.400 mm., Diameter 1.300 mm., Legs 2.150 mm., Barrel height 1.250 mm., Cone height 750 mm., inner screw 180 mm. diam., Nominal capacity 1.800 lt.ca, side discharging pipe, Discharging point 860 mm. from floor., hatch on barrel mm. 500 x 700, 1,5 kw drive, installed power - used power in work: about 60-65% : 1.5, capacity: 1800 lt.
USED VERTICAL MIXER, 24 m3 capacity, total height approx 5.400 mm including transmission group + cyclon, max Ø 2.800 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter,, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, electric voltage: 400 V, 50 Hz,, conditions: good working conditions, availability: immediate, width: 2800 mm. special transport
REF-2704 LLEAL MAX-MIX MM-500 VACUUM MIXER FOR LIQUID AND VISCOUS PRODUCTS Manufacturer: LLEAL Model: MAX-MIX MM-500 Year: 2000 Machine no.: 14890 Series: 3712 Electrical specifications: 49.8 kW/380 V/104 A/3+N+E/50 Hz Dimensions (in mm): See the drawing in the last picture. MAX-MIX MM-500 mixing, dispersion, emulsion and homogenisation system. The MAX-MIX processor is a multifunctional piece of equipment ideal for manufacturing liquid and viscous products that require dispersion, homogenisation and emulsion stages (in both solid/liquid and liquid/liquid processes) and that also require a complete deaeration, which is possible thanks to the internal vacuum circuit. The process can also include the heating or cooling of the products during their manufacture, the addition of solids and liquids in vacuum conditions, and the recirculation and discharge by positive displac ...
cantilevered mixer 120l when filled with water approx. 100l usable volume with control box with stud work with ball segment valve as outlet 0 operating hours at the end customer
Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel
Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel
General SKU309T740 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor3 KW Rotor70 mm Specified Features - Foam mixer Foam mixer:oscillation method: Rotor/Stator with pinscheck Rotor sizesdia. 70 mm InletDN25 OutletDN25 Motor3 kW 400-690 Volt With frequency controllercheck With MonopumpNetzsch NM021RY Motor0,75 kW Netzsch NM021RY Speed301 rpm Capacity40-300 Ltr/h MaterialStainless steel 1.4571 (316Ti) General MakeBEBA Mischtechnik TypeBM 800 With switchgearcheck Floorspace2,5x1,2 m Total height1,1 m Weight680 kg Extra SpecificationsWith tank: ± 200 Ltr., with jacketFoam mixersPowdered foodsRubberFood additivesLubricants & oleoDairyConfectioneryBEBA MischtechnikMixers > Foam mixersIndustries > Food & Feed > Powdered foodsIndustries > Chemical > RubberIndustries > Food & Feed > Food additivesIndustries > Chemical > Lubricants & oleoIndustries ...
General SKU420U1321 LocationBarneveld MakeMondomix Pressure Working pressure8 Bar Main Features MaterialStainless steel Motor1.1 KW Rotor80 mm Specified Features - Foam mixer Foam mixercheck Rotor/Stator with pinscheck Rotor sizesdia. 80x125 mm Inlet365x310 mm Outletdia. 19 mm Motor± 1,1 kW With frequency controllercheck With pumpcheck With Lobe pumpcheck Motorcheck MaterialStainless steel 1.4301 (304) General TypeA05 No.1283 Mounted on wheelscheck Floorspace1,60x0,55 m Total height1,60 m Weight200 kgFoam mixersPowdered foodsRubberFood additivesLubricants & oleoDairyConfectioneryMondomix HollandMixers > Foam mixersIndustries > Food & Feed > Powdered foodsIndustries > Chemical > RubberIndustries > Food & Feed > Food additivesIndustries > Chemical > Lubricants & oleoIndustries > Food & Feed > DairyIndustries > Food & Feed > ConfectioneryBrand > Mondomix Hollan ...
General SKU277S325 MakeSussmayer S.A. (BE) LocationBarneveld CEcheck TypeLSV-20 Main Features MaterialStainless steel Volume150 Ltr. Motor15 KW Specified Features - Butterfly mixer Butterfly-mixercheck Shaft length680 mm Butterfly diameter520 mm With covercheck With scrapercheck Motor15 kW 660-725/380-420 Volt With pans2x Capacity± 150 Ltr. Pan sizesdia. 590x570 mm With hydraulic liftingcheck Motor1,1 kW 220-240/380-415 Volt With vacuum pumpcheck Motor0,32 kW 230/400 Volt MaterialMild steel, Stainless steel General No.112945 Year of construction2000 Floorspace1,8x1 m Total height1,77 m Weight1400 kgButterfly mixersGeneric medicinesOintmentsCatalysts & fillersDetergent & surf.CosmeticsFood additivesDairyConfectioneryDyes & pigmentsBiopharmaceuticalMinerals & inorganicOils & fatSussmeyerMixers > Butterfly mixersIndustries > Pharmaceutical > Generic medicines ...
General SKU332T896 MakeNetsch LocationBarneveld TypeVPD 550 Main Features MaterialStainless steel Volume1000 Ltr. Motor55 KW Specified Features - Butterfly mixer Butterfly-mixercheck Shaft length900 mm Butterfly diameter1100 mm Motor55 kW With variable speed drive0-100 min-1 With pans(4x) Capacity1000 Ltr. Pan sizesdia. 1200x900 mm With hydraulic liftingcheck MaterialStainless steel, Stainless steel 1.4301 (304) General No.204574 Year of construction1999 With switchgearcheck Floorspace1,6x2,5 m Total height2,6 m Weight3200 kgButterfly mixersGeneric medicinesOintmentsCatalysts & fillersDetergent & surf.CosmeticsFood additivesDairyConfectioneryDyes & pigmentsBiopharmaceuticalMinerals & inorganicOils & fatNetzschMixers > Butterfly mixersIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Catalysts & fillers ...
VERTICAL MIXER 16.000 lt., Total height approx 6.450 mm, Loading from top with cyclone and dust sleeves collector, Max diam.2.380 mm., Constructed in painted electro-welded carbon steel., Inner auger diam.350 mm., Sampling hopper with safety grid and shutter, mm.600×500, Pulley and belt transmission, protected by carters, Inspection doors with safety limits, Cleaning hinged door with on bottom of cone for complete discharging,, with safety opening, Side discharging pipe to big bag with valve, paddle type max level indicator, automatic greasing kit, 11 kw electric motor, Complete with control panel., Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power - used power in work: about 60-65% : 11
General SKU127X744 MakeVibro-Mac Year of constructionunknown ( typeplate missing) LocationBarneveld Material Pan materialStainless steel Main Features MaterialStainless steel Volume5 Ltr. Specified Features - Butterfly mixer Butterfly-mixer(1x) With hydraulic drivecheck With variable speed drivecheck With pans(1x) Capacity± 5 Ltr Pan sizesdia. 200x200mm With hydraulic liftingcheck MaterialStainless steel General With switchgear(as is) Floorspace0,7 x 0,6 m Total height1,7 m Weight350 kgButterfly mixersGeneric medicinesOintmentsCatalysts & fillersDiscountDetergent & surf.CosmeticsFood additivesDairyConfectioneryDyes & pigmentsBiopharmaceuticalMinerals & inorganicOils & fatVibro-MacMixers > Butterfly mixersIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Catalysts & fillersDiscountIndustries > Chemical > ...
General SKU307S484 MakeTrefa Continu Aerating Systems B.V. (NL) LocationBarneveld CEcheck TypeT250 Main Features MaterialStainless steel Motor7.5 KW Rotor168 mm Specified Features - Foam mixer Rotor/Stator with pinscheck Rotor sizesdia.168x175mm Inletdia. 25mm Outletdia. 25mm With jacketcheck Motor7.5kW 380/420 Volt With frequency controllercheck Rotor speedmax. 604 Rpm Capacitymax. 360 l/h air @ max. 10 bar MaterialStainless steel With jacketcheck General No.025.282 Year of construction2004 Mounted on stainless st. framecheck With switchgear(as is) Floorspace0.9x1.6 M Total height2.2 M Weight600 KgFoam mixersPowdered foodsRubberFood additivesLubricants & oleoDairyConfectioneryTrefa AeratingMixers > Foam mixersIndustries > Food & Feed > Powdered foodsIndustries > Chemical > RubberIndustries > Food & Feed > Food additivesIndustries > Chemical > Lubricants & o ...
General SKU307S485 MakeCampen Machinery A/S (DK) LocationBarneveld CEcheck TypeAN 200500 Main Features MaterialStainless steel Motor5.5 KW Rotor240 mm Specified Features - Foam mixer Foam mixercheck Rotor/Stator with pinscheck Rotor sizesdia. 240x400mm Inletdia. 40mm Outletdia. 45mm With jacketcheck Motor5,5 kW 400 volt With Monopumpcheck MaterialStainless steel With jacketcheck General No.02 03 350 Year of construction2002 Mounted on wheelscheck With switch(as is) Floorspace2,4x1,7 M Total height1,9 M Weight1000 Kg Extra SpecificationsIncludes a spare mono pumpFoam mixersPowdered foodsRubberFood additivesLubricants & oleoDairyConfectioneryCampen Machinery A/SMixers > Foam mixersIndustries > Food & Feed > Powdered foodsIndustries > Chemical > RubberIndustries > Food & Feed > Food additivesIndustries > Chemical > Lubricants & oleoIndustries > Food & Feed > Da ...
General SKU362X851 MakeCOLLIN LocationBarneveld CEcheck Type3-Roller Calander: calander type 250 × 600 Main Features Motor46 KW Width600 mm Specified Features - Mixing mill Roll width600 mm (nominal 500 mm) Roll diameter252 mm Rolls can be heated/cooled(roller 2&:3) 9 kW: 320 °C With variable speed drivecheck Roll speed± 8,6 rpm Rolls can be adjusted0—2 mm With hydraulic unitcheck With motorcheck MotorServo motor nominal power 1.4 kW (per roll drive): unwinder 0.24 kW: winder 0.24 kW: hydraulic pump 2.2 kW: oil cooler 0.25 kW: heating 9 kW per heated roller Mixing mills MaterialHardened Tool Steel General No.4490-07-06 Year of construction2006 Mounted on framecheck With switchcheck With switchgear(as is) Floorspace3,12 x 1,8 m Total height3,16 m Weight3500 kg Extra SpecificationsApplication: finishing/planishing of foil materials up to 2 mm thickness&: ...
maximum number of results exceeded
please refine your search
