miwe shop in used for sale

Overview This KHS Innopack SP, built in 2006, is a pick-and-place case packer for bottles. Empty cases run on the case conveyor into the packing zone, where they are stopped and centred; the gripper head picks the bottle formation from the four-lane infeed table and sets it into the cases. The lifting unit travels on a vertical lifting column with counterweight, and the motion is controlled by a KUKA KR C2 controller with KCP teach pendant. Four change-part trolleys with gripper heads for different bottle sizes are included. The packer is still installed in a wine bottling and packaging line and can be inspected on site. Technical data Manufacturer: KHS Model: Innopack SP Year of manufacture: 2006 Machine type: pick-and-place case packer Bottle infeed: 4 lanes, lane width 85 mm Gripper head: 2 x 18 bottle tulips, formation 3 x 6 bottles Case clearance: 175 x 400 mm Power supply packer: 4 ...

Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data Manufacturer: KHS AG (Dortmund, Germany) Model: Innopro warmer-cooler Year of manufacture: 2006 (control cabinet 2007) Machine type: thermoregulator for heating or cooling wine, skid-mounted Product: wine Throughput: 9,900 l/h (99 hl/h) Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at  ...

Used pick and place ” robot made by Pro Inzynier with a carton packaging machine. New 2022. Technical specifications: Power supply: 400 V, 50 Hz, 12 kW; Weight: 10,000 kg; Plastic conveyor belt; Conveyor belt width: 500 mm; passage dimensions: 530 mm x 120 mm; Overall dimensions: 3,250 mm x 7,700 mm x 2,550 mm.

Important note: the spindle was replaced in 2025 for approx. 40,000 EUR, therefore few spindle hours! The pallets are clamped on the rotary tilting table. Incl technical documentation and HSK-E 40 tool holders and three pallets. additional technical data: • rapid traverse: max. 30 m/min

With technical documentation as well as workbench and accessories such as HSK-E 40 tool holders, equipped with tools. Additional technical specifications: • Table T-slots quantity: 5 pcs • T-slots dimensions: 18H12 • Distance HSK holder - table: 550 mm • Feed drive X-, Y- and Z-axis: Traversing speed: 30 m/min • Dimensions of the workbench: approx. 1500 x 900 x 1100 mm

Plummer block housings, pillow block housings, pillow block housings, pillow block housing units, pillow block housing units, SKF pillow block housings, pillow block housing units -Plumb block bearing: bearing block, inner Ø 50 mm -Holes: 160 mm spacing x Ø18 mm -Quantity: 3 pillow block housings available - Price: per piece -Dimensions: 210/50/H170 mm -Weight: 3.3 kg/piece

2018 Italian Pack inline traysealer – pre-owned, Compact inline traysealer for fresh products., This 2018 Italian Pack traysealer seals trays with top film and is built as an inline machine with infeed and outfeed conveyor. It comes complete with a vacuum pump and several tool sets, and is suitable for MAP packaging depending on the configuration., Key features, - Inline version: infeed and outfeed conveyor with guards, ready to run in a packaging line, - Stainless steel construction: suited to hygienic food production environments, - PLC control with touchscreen: simple operation and programmable settings, - Automatic film feed: reel holder for top film above the sealing unit, - Vacuum pump fitted: suitable for MAP packaging, depending on the configuration, - Compact footprint: fits smaller production rooms as well, Tooling included, The machine comes with a set of tools for different ...

Description Item # 9396 - AUTOMATIC TRAY SEALER Manufactured by MECAPACK Model Meca 2003 VG Inox Year 2003 Completely refurbished & updated in 2017 by SODIMA Company 3m loading conveyor extension equipped with a variable speed drive and 1 emergency stop button (SODIMA) Tray denester with 1 magazine, 4-lane setup (SODIMA) Siemens automation system with touchscreen (SODIMA) 160 m³/h vacuum pump (SODIMA) 4-to-1 lane merging system for batch code printing (SODIMA) 1 set of 4-lane tooling sized for the trays (SODIMA) Products: 120 x 76 mm dual-compartment PP tray – fruit puree / biscuit Tray depths from 20 to 80mms Film width: 470 mm Cut pitch: 154 mm Machine core diameter: 76 mm Around 10-12 cycles per minute Line speed: 40 trays/minute (i.e., 2,400 trays/hour) Also including a FILLPACK Dual Dosing Unit Two Dosing Units, each up to 300cc Year 2017, Fruit pieces in compote for dosing unit  ...

5-axis machining center Hedelius ACURA 65 incl. standby magazine Control: TNC 640 Year of Make: 2017 Internal machine no. 80 Travels: X-axis: 700 mm Y-axis H / V: 650 / 465 mm Z-axis: 600 mm Swivel table: Ø 650 x 540 mm Swivel range: +30° to -115° Table load: 500 kg Mount: DIN 69871 AD 40 Tool magazine: 65 – compartment Spindle speed: 50 - 14,000 rpm Accessories Standby magazine 180 seats Inclined bed coolant system SKM 900 Chip conveyor LTA Suction 3D Probe Rinsing gun KinematicOpt

Offer 26219 Technical data: - Saw blade dimensions 3375 x 27 x 1.1 mm - Cutting speed infinitely adjustable 18 - 100 m/min - Hydr. Cutting pressure regulation - Hydr.- Lifting + lowering of the saw frame - Machine table left + right swivel for mitre cuts - Cutting area - at 90° around 255 mm - Square 240 mm - flat 300 x 180 mm - at 45° around 210 mm - flat 200 x 160 mm - at 60° left about 135 mm - Max. opening width of the vice 310 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 2000 x H 1500 x D 2100 mm - Weight approx. 990 kg with - Feed roller conveyor 5000 mm - Discharge roller conveyor with dimension stop 5000 mm

General SKU376X935 MakeBecomix LocationBarneveld CEcheck TypeDH-500 Motor Motor power8 kiloWatt Main Features MaterialStainless steel Motor8 KW Inlet diameter50 mm Specified Features - Inline mixer Colloid millcheck Emulsifiercheck Rotor sizesDia 245 x 40 mm Teethed rotorcheck Without hoppercheck Inlet25 mm and 50 mm Outlet50 mm With mechanical sealcheck Motor8 kW (400 V, 2950 rpm) With variable speed drive(freq controller) Speed2910 rpm. Inline high shear mixers MaterialStainless steel 1.4306 (304L) General No.070/4-N0003 Year of construction2010 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace0,6 x 1 m Total height1 m Weight250 kg Extra Specifications:in-line: colloid-millAgrochemicalsCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectioneryBe ...

Overview Complete wine bottling line with KHS and Krones machines for 0.75 l glass bottles, rated at 12,000 bottles per hour. The line runs from depalletizing, bottle washing and empty bottle inspection through the KHS Innofill NRF filler-closer monoblock (natural cork or aluminium screw caps) to capsuling, labelling, case packing and robotic palletizing. A KHS process area with cartridge filtration and a wine warmer-cooler prepares the wine ahead of the filler. The line is still installed and can be inspected on site. Technical data Product: still wine Containers: glass bottles, design bottle 0.75 l Line output: 12,000 bottles/h Closures: natural cork, aluminium roll-on screw caps, shrink capsules Years of manufacture: 2006 - 2023 Scope of Delivery Type | Manufacturer | Model | Description | Year | Listing Bottling line Glass depalletizer | Krones | PRESSANT UNIVERSAL 1N | sweep-off dep ...

Key data: 660 mm, 995 mm

We hereby offer this neat CNC lathe and milling machine. It is a Mazak Integrex 200-IV S from 2010 with the Mazatrol Matrix control. Technical data: Turning diameter: 260 – 660 mm Max. turning length: 1495 mm Bar Passage: 65 mm X-axis travel: 580 mm Y-axis travel: 150 mm Travel Z-axis: 1,045mm Travel W-axis: 1,050mm B-axis travels -30 to 210° Main and sub-spindle: 5,000 1/min. Milling spindle: 12,000 1/min. (Capto C6) Tool magazine: 40 tool positions We can imagine that you would like more information or would like to view the machine. In this case, please contact us with your company details so that we can contact you. About Mamach Machinehandel B.V. : With over 40 years of experience in the CNC machine business, we are now one of the leading suppliers of metalworking machines in Europe. Our success is based on high q ...

Metal detector on its own conveyor, This Lock MET 30+ by Lock Inspection Systems (England) checks products for metal particles as they pass through the detector head on the belt. The detector sits on its own frame with a modular plastic belt and castors, so it is easy to place in a line. Product settings are selected with the keys on the display; one of the stored programmes is for tomatoes., The serial number and year of manufacture have not been filled in on the rating plate, so they are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/lock-met-30-metal-detector-with-conveyo r/, Type: Metal detector with conveyor, Belt: Modular plastic belt, Controls: Display with selection keys, stored product programmes, Construction: Stainless steel, frame on castors

Minebea Intec metal detector on conveyor, built in 2021, This Minebea Intec metal detector is mounted on a mobile conveyor with a 350 mm wide modular belt, a reject unit and a roller section at the outfeed. The aperture is 400 × 165 mm (w × h), the belt is 2,100 mm long. The conveyor has a transparent guard over the belt., Located in Emmeloord, the Netherlands. Available on request, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/2021-minebea-intec-metal-detector-conve yor/, Type: Metal detector with conveyor, Aperture: 400 × 165 mm (w × h), Belt width: 350 mm, Belt length: 2,100 mm, Dimensions: Approx. 2,400 × 1,200 × 1,200 mm (l × w × h)

The scope of delivery includes: 01x U-shaped collision protection corner, new Material colour: yellow / black (according to DIN standard) Total height: 400 mm Total width: 340 mm Total depth: 205 mm Unit weight: 10.366 kg Opening inner dimensions: 240 mm Base plate: 50 x 200 mm Bore diameter: 15.5 mm Leg length at the bottom: 200 mm Top leg length: 200 mm Material thickness: 5 mm General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

The scope of delivery includes: 01x U-shaped collision protection corner, new Material colour: yellow / black (according to DIN standard) Total height: 400 mm Total width: 350 mm Total depth: 200 mm Unit weight: 7.92 kg Opening inner dimension: 236 mm Base plate: 60 x 200 mm Bore diameter: 15.5 mm Leg length at the bottom: 200 mm Top leg length: 55 mm Material thickness: 5 mm General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

TECHNICAL DATA Materials: • PE • PP • Extra Cut • Thermo • Clear and Clear • PET • Suitable for blank materials • Suitable for pre-printed materials with register marks Operating / Printing Modes: • Semi-rotary • Full-rotary • Centre dancer • Webbing-up mode for web threading • Printing mode • Web type selection: blank web / printed web Flexographic Printing Unit: • 1 flexographic printing station • Suitable for UV ink and varnish • Printing cylinder • Varnish cylinder • Impression roller • Anilox roller • Cartridge Electrical & Pneumatic Requirements: Electrical supply: 400 V Current: 40 A Frequency: 50 Hz Compressed air: 6 bar Air consumption: 300 l/min

Qty. 1 Second-hand extrusion pres line – in storage Mfc.: Tuerkish Co., Rexroth, Siemens Force: 1600 MT Built: 1996 Billet dia.: 6”, 157 x 560 mm Main Cylinder Dia.: Ø395 mm PLC: Siemens, S7 – 1500 Press presusre: 315 bar Hydraulic System: Rexroth Main Press Motor: 110 kW – 1,400 rpm Main Pump: Rexroth A4VSO 125 Auxiliary Pump Motor: 75 kW – 1,400 rpm Auxiliary Pump: Rexroth A2F016 Container Pump: 5.5 kW – 1,400 rpm – Rexroth A2F016

Qty. 1 Second-hand extrusion pres line – in storage Mfc.: Tuerkish Co., Rexroth, Siemens Force: 900 MT Built: 2007 Billet dia.: 5”, 127 x 390 mm Main Cylinder Dia.: Ø395 mm PLC: Siemens, S7 – 1500 Press presusre: 315 bar Hydraulic System: Rexroth Main Press Motor: 90 kW – 1,400 rpm Main Pump: Rexroth A4VSO 125 Auxiliary Pump Motor: 7 kW – 1,400 rpm Auxiliary Pump: Rexroth A2F016 Container Pump: 5.5 kW – 1,400 rpm – Rexroth A2F016

Process Vessels Stainless Steel Mixer/Melting Tank Manufacturer: Dibir Group Srl Capacity approx. 120 litres Electrically heated, thermal oil Frequency-controlled agitator Temperature control

General SKU200W001 MakeHPV TypeDish LPD liquid processing unit No.1200-0708/2008 Year of construction2008 LocationBarneveld Main Features MaterialStainless steel Motor5.5 KW Specified Features - Inline mixer Capacity18,0 t/h of final product MaterialStainless steel 1.4435 (316L) General Floorspace6,4x2,35 m Total height2,6 m Weight3500 kg CEcheck Extra Specificationsperfume, aroma, mixing skidThe LLPD mixing machine is designed for continuous mixing of the final product and its accumulation for subsequent pumping into final packaging. The machine is capable of producing various modifications of the final product (FP) in 10 perfume variants and different color spectra available within the capacity ranges of dye dosing systems. Qualified reblend (RB) can be added to FP during normal production within the dosing capacity range. The LLPD mixing machine consists of:• 2x w ...

General SKU200W006 MakeHPV LocationBarneveld TypeRV Base SO Main Features MaterialStainless steel Motor7.5 KW Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 75x15 mm Inletdia. 40 mm OutletDia. 30 mm Number of stages:2 Capacity2500l/h Max. temperature160°C With mechanical sealcheck Motor7,5 kw, 400V, (EX) With frequency controllercheck Rotor speed6000 rpm With vesselcheck Capacity2x 600l Vessel sizesDIa. 790x1400 mm Inline high shear mixers Capacity0,6m³/h With motor1,5kW, 400V, 720rpm (EX) 2x With frequency invertercheck Specified Features - Inline mixer MaterialStainless steel 1.4404 (316L) General No.2002-M-1 Year of construction2013 With switchgear(as is) Floorspace4,0x3,0 m Total height2.5 Extra SpecificationsSkid mounted stainless steel RV base SO.with:IKA, type Dispax-reactor DR2000/5-ATEX, year 2013, motor 7,5kw, 400 ...

Reference ID: PP-62267 Manufacturer: Inmatech Model: DFG 3000 Year: 2021 Max. Size: 3,000 x 2,000 mm Condition: Good Location: Europe Availability: Immediately INMATECH GLUER FOR LARGE-FORMAT RSC BOXES Manufacturer: INMATECH Machine Type: Gluer for Large-Format RSCs (Regular Slotted Containers) Machine Description Designed for joining two identical half-blanks Two vertically stacked feeders Automatic pick-up of two blanks Automatic folding of glue flaps Hot-Melt Adhesive Application Automatic joining of both halves into a finished box High folding and gluing repeatability Optional Dual-Adhesive System Hot-melt adhesive applied at the beginning, middle and end of the glue flap Dispersion (cold) glue applied to the remaining sections Reduced adhesive costs Lower consumption of expensive hot-melt adhesive Suitable for cost-efficient large-format box production  ...

Top/bottom calibrating line: Bottom sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction Top sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction

PFM S.P.A. FALCON HORIZONTAL FLOW WRAPER WITH TRAY DENESTER

Key data: 915 mm, 6000 mm

1 turning and milling center Make: Mazak Model: Integrex 650 H Year of Make: 2004 CNC control. Mazatrol 640 NT-Pro Turning diameter: 915 mm Turning length: 6000 mm Equipment / Accessories: Drill rods Tool measuring device Tool Changer 2 automatic setting sticks diameter 190 – 350 mm 1 automatic setting stick diameter 50 – 268 mm 1 manual setting stick diameter 400 - 610 mm 1 three-jaw chuck diameter 630 mm Cooling lubrication system Coolant tank 1150 l Coolant pump 70 bar otherwise according to the technical data in the appendix. Machine has been regularly serviced and is in very good condition.

turning diameter:200 mm swing diameter:260 mm turning height:200 mm Tool table:1054 x 400 mm Dimensions (L/W/H):2200 x 2300 x 2300 mm weight:3300 kg slide travel radial ( X-axis ):520 mm slide travel axial ( Z-axis ):200 mm no pallet circulating belt, no C-axis, no driven tools

number of spindles:6 spindle passage:22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. No socket for powered tools!

turning diameter:270 -300 mm turning length:710 mm total power requirement:43 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:3,16 x 2,15 x 2,15 m The machine does not include a chuck or tools ? the machine was originally purchased without these accessories. The G300 has X, Z, Y, C, SP, and driven tools. A bar feeder can be used, but the machine does not have one.

turning diameter:270 mm turning length:710 mm weight of the machine ca.:6,5 t max. swing diameter:590 mm with automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.

turning diameter:270 mm turning length:710 mm weight of the machine ca.:6,5 t max. swing diameter:590 mm with live tools:VDI40 Live tooling VDI40 with automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock version Chip conveyor, belt filter press, hydraulic unit, as well as infeed and outfeed chain conveyor EWAP, with 33 pallets. The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.

turning diameter:270 mm turning length:710 mm weight of the machine ca.:6,5 t max. swing diameter:590 mm with automatic loading and unloading system, chip conveyor G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.

turning diameter:626 mm turning length:3000 mm Turning diameter:600 mm spindle bore:100 mm spindle turning speed range:2800 U/min weight of the machine ca.:18 t Machine overhold and retrofit in 2003 with SIEMENS 840 D control - NC steady rest - 12-fold revolving head - splash doors - tailstock - coolant device

Complete reconditioned Caterpillar C9 engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact our sales on www.hamofa. com, überholt, gebraucht, Teile, reconditionné, utilisé, pièces, reacondicionado, utiliza, piezas., , 4ZF: 1660270 1660273 1687966-7967 1693788-1693791 1716598 1747515-7516 1747518-7519 1747521-7522 1765509 1769269 1771414-1771420 1794952 1794954 1794956 1794958 1870470-0471 1910127 1944160-4161 2037058 2051484 2083027 2090527-0528 2115020 2155528 2164798 2164800-2164804 2336935 2342917 2354129 2370283 2420067-1676 2421677 2429110 2538366-8367 2545748-2545753 2555205 2641329-1330 2671315-1316 2856123 2901143-2901145, 7AZ: 1693791 1716598 1870470 2083027 2115020 2342917 2354129 2370283 2545750 2545752, CLJ: 1968493 2010333 ...

Complete reconditioned Caterpillar C18 industrial engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact sales on www.hamofa. com, , BDN: 3390032 3442365 3466743 3466745 3505414 3507655 3507664 3516331 3660331 3660332 3660334 3660335 3662750 3665643 3670852 3761311 3761312 3901782 3901783 4434685 4627717 4728136 4728139, BE2: 4321964 4366389 4370377, EJG: 2410018 2543824 3264061 3264761 3605970 3605971 3678505 3678506, GJE: 3264061 3264761 3605970 3605971 3678505 3678506, JDA: 3253283 3266581, N8F: 3765374 3765376 3765377 3857727 3857728 4240056, NBB: 3149713 3149714 3311789 3311790 3645379 3645434 3645443 3645476 4228810 4343754-4343756, PRL: 3048533 3260703, R4L: 3016805 3424633 3473707 3473708 3547688 3592012 3612444 3704606, RDP: 3643723 ...

Technical details Type: Industrial metalworking cutting tool lot Configuration: - Morse taper twist drills - Taper shank reamers - Machine reamers - Shell mills - Side and face milling cutters - Gear cutters - Slitting saws - Thread taps - Thread plug gauges (GO/NO-GO) - End mills - Countersinks - Arbor-mounted cutters - Tool holders and machine accessories - Industrial fasteners Application: - Drilling - Reaming - Milling - Gear cutting - Thread cutting - Precision machining - General machine shop operations Construction: - HSS and solid metal cutting tools - Precision-ground tooling Estimated quantity: - Several hundred individual tools Dimensions (lot): - Length: Approx. 600 mm - Width: Approx. 400 mm - Height: Approx. 300 mm Weight: Approx. 80 kg Condition: Used Observed condition: - Cutting edges generally appear serviceable - No significant co ...

Technical details Type: Industrial machine shop tooling lot Configuration: - Machine taps and thread taps - Twist drills - Reamers and adjustable reamers - Milling cutters - Slitting saws - Boring bars - Tool holders - Machine arbors - Precision fixtures - Lathe tool blocks - Dial measuring instruments - Bearing components - Wooden storage cases - Miscellaneous precision spare parts Application: - Drilling - Milling - Reaming - Thread cutting - Boring - Toolroom and maintenance operations - General machine shop use Construction: - HSS and precision-ground tooling - Hardened steel machine accessories Estimated quantity: - Approx. 600–1200 tooling items - Approx. 150–300 wooden storage cases - Several hundred additional precision components Condition: Used Observed condition: - Stored indoors - Inventory appears largely complete - Moderate surface o ...

Wiesheu B4 M Hot air oven with fermentation oven used shop oven Wiesheu for 4 sheets 60x40 cm with exhaust hood. The oven is made with a fermentation cabinet from 2005. The furnace is with fixed water connection for swelling and is movable on wheels. We have a wide selection of shop ovens in the warehouse to visit at any time. You can visit this and theothere ovens. Payment and shipping on request. Wiesheu circulating air oven Type: B4 E2 IS600 for 4 sheets 60x40 sheets with fermentation chamber / built 2005 with IS500 control 2x10 editions for 60x40 sheets Control IS 600 Hood completely stainless steel clad Door stop left Furnace built in 2005 Technical data furnace: 400V - 50Hz - 13A - 8.4 kW Dimensions: Height: approx. 210 cm Width: approx. 90 cm Depth: approx. 95 cm

Unit set for paint booth with speed control and heat recovery: Make : Wolf, Type 4/B-M Year of construction 2009 Dimensions : 1.5 m x 4.2 m x 3.0 m (approx. WxLxH) Heating unit : 209 kW Burners : oil burners, Weishaupt brand, alternatively gas burners Exhaust gas fireplace : stainless steel, single-walled, diameter 250 mm length approx. 6 m Supply air unit : 21,200 m3/h; 7.5 kW, 1,500 1/min Exhaust air unit : 21,000 m3/h; 7.5 kW, 1,500 1/min Energy saving : Speed control with frequency converter and heat recovery Pipelines : Supply and exhaust air pipes, deflector hood, air intake hood Electrics : Control cabinet Location : Nuremberg Area Retail price : € 11.900,-, net, ex location

Paint shop Memmingen: Paint booth, special size: Make : LUTRO Year of manuf.: 1995 / 2017 - new units and pipelines, LED lighting, etc. Dimensions : 5.6 m x 9.48 m x 4.7 m (approx. WxLxH), total height 5.5 m Supply air blanket : Filter ceiling Lamps : 2x4 pcs LED inclined recessed luminaires + 2x3 LED wall recessed luminaires on the side Entrance side : Roller shutter 5.3 m x 4.2 m (approx. WxH) Exit side : Sliding gate (fire protection gate) is not included in the scope of delivery Escape door: 3 pieces: 0.95 m x 3.0 m; 0.95 x 2.0 m; 0.75 x 2.0 m (approx. WxH) Rusting : without rusting, without substructure, we have ev. Grates in stock Heating unit : approx. 250 kW, gas surface burner Energy saving: Heat recovery Dry temperature: 80 degrees C Supply air unit : approx. 22,000 m3/h Exhaust air unit : approx. 22,000 m3/h Pipelines : supply and exhaust air pipes, deflec ...

Line is equipped with the following: • 25 ton EAF w/356mm electrode & 16 MVA trsfmr (rblt 2006) • 25 ton LF w/305mm electrode & 3 MVA trsfmr new 2006 • 25 ton VOD/VAD w/305mm electrode & 3 MVA trsfmr23297 • 2-Strand VAI Caster new 1990's: Hand & Auto Controls 6 ton tundish (ladle) movable crystalizer electromagnetic stirrer • 8 ton ESR (2 pillars) w/4MVA transformer will produce 1 to 10 ton ingots • Dust collection system • 12.5 ton charging cranes • 50 ton ladle cranes • 12.5 ton service cranes • ingot moulds • ladles

Modular Touch Screen Scale PC Scale METTLER TOLEDO Model: FW-T 6D B Proven quality from Mettler-Toledo! Year of Make: 2021 Calibrated until 31.12.2025 Colour: black 12.1-inch (30.7 cm) touchscreen 15.6" (39.6 cm) display 2-inch receipt printer (54 mm) Printer: Linerless Printer Interfaces: Gigabit Ethernet 10/100/1000; 1 x RJ11; 2 x USB; 2 x USB 3.0 Intel® Dual Core Up to 8 GB RAM; Up to 128 GB Flash DDR3 RAM; Solid State Disk (SSD) Microsoft Windows® 10 IoT 64-bit Shock-resistant die-cast aluminum housing with non-stick coating incl. 12" customer display incl. TK POS POS POS software Multigrade weigher: 3/6kg Graduation(s): 1/2g Minimum load (min): 10/20g The current model from Mettler Toledo prepared for TSE. incl. Windows and cash register option, which you need for TSE Fast Linerless / Receipt Printer up to 30  ...

A used Wiesheu DUO in-store baking oven B4 + B8 EM Vario from 2015 is currently for sale and immediately available in stock. The oven consists of two ovens on top of each other, a B4 oven which is for 5 trays of 60x40cm and a B8 oven which is for 10 trays of 60x40cm each. The oven has two digital controls including baking program storage. In addition, the stove is mobile on castors and has a fixed water connection. Wiesheu DUO In-store Baking Oven B4 + B8 EM Vario - Stainless steel clad - Large glass front -digital control - 5 cushions 60x40 cm (upper oven) - 8 60 x40 cm cushions (lower oven) - Mobile on swivel castors - With steam condenser Dimensions: Height: 217 cm Width: 94cm Depth: 95cm + hood 25cm Specifications Year of Make: 2015 Voltage: 400 V / 50 Hz Power: 20.8 kW Rated current 32 A

Tier Oven Wachtel Piccolo I-6 DMS 3 Year of Make: 2016 A used electric deck oven Wachtel Piccolo I-6 with 6 shelves each 80x60cm is for sale. This oven is function-tested immediately available in stock. The oven is equipped with exhaust hood and proofer. Deck Oven Quail Piccolo I-6 DMS 3 Glass with 7-Day Clock - 6 shelves each 80x60cm - Each floor with separate controls - Top and bottom heat can be controlled separately - Each floor with a separate steam box for the generation of steam - With automatic night start function - With exhaust hood - Stove with water connection for steam - 29.3 kW - Voltage: 400V AC/3Ph/N/PE/50Hz - Year of construction: 7/2016 Shipping costs and trade-in on request.

-Hot air oven Torero Store 4 -for 4 sheets 60x40cm -Built in 2012 -10 kw -2 floors Matador Store 6.4 -per floor one sheet 60x40cm -Built in 2012 -per floor 6.7 kW -Base 6.4.600

Shop oven Wiesheu B4-E2 and B8-E2 Type: B4-E2 and B8-E2 2 ovens on top of each other Stainless steel clad digital control 5 lengths 60x40 cm (upper oven) 8 lengths 60x40 cm (lower oven) Mobile on steering wheels Dimensions: Height: 210 cm Width: 95 cm Depth: 90 cm Technical data: upper oven: B4-E2 9.2 kW lower oven: B8-E2 18.4 kW both from 2012 400V - 50 Hz

Debag Backcombi Dila + Helios consisting of Debag Dila+ Helios+ fermentation cabinet Debag Dila for 5 sheets 60x40cm -Built 08/2011 -12.6 kW -Door stop on the left -Debag Helios 4060 E -Bj: 08/2011 -4.0 kW

-Oven with program memory -Oven is 10 sheets 60x40cm -Door stop on the left -with swath capacitor and hood -with base including sheet metal pads -18.4 kW -400 Volt, 32 A CEE plug -Year of construction 10 / 2011 Dimensions: approx. 93cm wide Height with hood 216cm

In-store oven Wiesheu B10 Dibas 2 Hot air oven Wiesheu Dibas for 10 trays 60x40cm with fermentation cabinet and exhaust air hood including steam condenser immediately available in the warehouse for sale. -Oven is for 10 trays 60x40cm -with automatic door -with IS600 control -Year of construction 2006 -Rated current 26.6 A -Power: 18.4 kW -Proofing cabinet for 20 sheets 60x40cm -Model : GS2 ED60/40 0700_A-BJDBA -Year of construction 2009 -Connection: 2.1 kW Dimensions: Width: 93cm Depth: 105cm Height 218cm