mitsubishi generators used for sale

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-2010 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-2020 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-3510 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-3520 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-3535 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-4535 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-4520 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-4545 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V24-2020 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Reparatur und Austausch Service Item: I/O Card DE65UB004251 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Mitsubishi, frequency converter FR-A044-2.2K-ER -Power: 2.2 kW -Input: 380-460 V 50/60 Hz -Output: 6.0 A -Dimensions: 215/200/H185 mm -Weight: 4.8 kg

Repair and Exchange service Reparatur und Austausch Service Item: I/O board type DE65ARU00011 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Three-phase motor, electric motor -Mitsubishi: Super Line type SF-J -Power: 2.2 kW -Speed: 1430/1720 rpm -Shaft: Ø 28 x 55 mm -Construction: B3 -Dimensions: 360/270/H205 mm -Weight: 30 kg

Central processing unit, control, switchgear, CPU, SPS, SPS control -Manufacturer: Mitsubishi, SPS control from tray sealing machine Inauen VC999/ TS 1200 N -Type: FX2n-48MR-DS -Total dimensions: 295/90/H83 mm -Weight: 1.3 kg

Repair and Exchange service Reparatur und Austausch Service Item: I/O board type DE65YUK00011 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Mitsubishi, frequency converter type FR-S520SE-0. 4K-EC -Power: 0.4 kW -Input: 200- 240 V 50/60 Hz -Output: 3PH AC200-240V 0.5-120Hz -Dimensions: 170/75/H180 mm -Weight: 1.3 kg

Repair and Exchange service Reparatur und Austausch Service Item: I/O board type DE65UB002520 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Reparatur und Austausch Service Item: I/O board type DE65UB002580 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Reparatur und Austausch Service Article: I/O board type D70RA003841 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

PLC controller, electronic module, PLC control -Manufacturer: Mitsubishi, Programmable Controller -Type: FX2N-48MR-DS FX2N-5A FX2N-2LC -Individual components: see photos -Price/Fee: complete -Dimensions: 290/85/H95 mm -Weight: 1.3 kg

Turning tool with indexable jaws, clamp holder, turning tool, indexable insert holder, turning insert, indexable insert steel, -Manufacturer: Mitsubishi, clamp holder turning tool -Type: DGHR2525MS -Dimensions: 157/25/H39 mm -Weight: 0.7 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 2.2 kW -Dimensions: L300/W220/D180 mm -Number: 1x converter available Price: per piece -Weight: 8 kg

Repair and Exchange service Reparatur und Austausch Service Item: I/O board type DE65UB002760 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Starter Mitsubishi -Voltage 24 V -Type: M2T65275 -Teeth: 11 -Weight: 7 kg

Repair and Exchange service Reparatur und Austausch Service Item: I/O board type DE65UB002530 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Max. workpiece dimensions (W x D x H) 1050 x 820 x 305 mm Max. workpiece weight 1500 kg Table dimensions (W x D) 860x640 mm Machine travels (X x Y x Z) 600 x 400 x 310 mm Machine travels (U x V) ±75 x ±75 mm

Repair and Exchange service Reparatur und Austausch Service Item: I/O board type DE65UB002580 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Reparatur und Austausch Service Article: I/O board type 03-81579-02 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Reparatur und Austausch Service Item: I/O board type DE65UB002560 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Reparatur und Austausch Service Part: Keyboard Type 40IAPT-I88-02R For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Reparatur und Austausch Service Item: Spindle Encoder Type TS5690N1230 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Key data: 1059 KW, 1500 1/min

Mitsubishi S16N - PTA Diesel Generator 1059 kW, low running hours Mitsubishi S16N - PTA Diesel Generator Description: The Mitsubishi S16N - PTA is a 1059 kW diesel generator designed for industrial use. It provides reliable power for large applications, powered by a Mitsubishi S16N engine. This model is built for durability and efficiency, offering long-term performance with minimal maintenance. Technical Specifications: Model: S16N - PTA Year: 1989 Power Output: 1059 kW / 1320 kVA Engine Type: Mitsubishi S16N (16-cylinder, naturally aspirated) Fuel Type: Diesel Speed: 1500 RPM Voltage: 400/230 V Frequency: 50 Hz Cooling System: Water-cooled Alternator: Synchronous, brushless Fuel Consumption: 210-220 g/kWh (approx.) Starting System: 24V electric start Feel free to contact if you require any further information, contact us at: Info@ukpowergeneratorsl ...

1. Combined Cycle 2. Manufacturer: Mitsubishi (Japan) 3. Commissioning year: 2007 4. Output: 248MW 5. Frequency: 50Hz 6. Pulverized Coal consumption: 1700 ton/day 7. Type: Gasification Furnace/Air Blowing Dry Feed System 8. Gas purification: Wet gas purification＋ Gypsum recovery 9. Gas Turbine １200℃ class 10. Total Running hours: approx. 32,000 hours 11. Design Thermal Efficiency: 12. Power Generation End４8(46)％ / Transmission End ４2(40.5)％ 13. (Thermal efficiency is based on high-level heat (HHV), 14. Low heat (LHV) standard in parentheses) • • -Gasification Furnace • -Pulverized coal Machine • -Heat Exchanger • -Gas purifier • -Booster • -Gas Turbine • -Steam Turbine • -Generator • -HRSG (Heat Recovery Steam Generator) -Transformer

Mitsubishi FR-RC-30K TC100A 031G51

2 X ENGINES FOR SALE Brand: MITSUBISHI Model: S12A2 C2 MPTK (FW) Power: 634 kW (850 hp) 1940 rpm Specification: Flywheel housing: SAE-0, Flyvheel: 18 Inch, Starter: 2x 24V, Governor Cooling system: Keel cooled Remarks: R41E3022300 HS CODE 84081019 Dimensions (cm): 230 x 165 x 160 Dry weight (kg) : 3800

MITSUBISHI S16R-C2 MPTK (FW) Power: 1700 HP 1600 rpm Features: Flywheel housing,Flywheel,Starter,Governor,Exhaust system,Turbo, Cooling system Engine Specification: 16-cylinder 4-stroke Water-cooled diesel engine With direct-injection, turbocharger Air-cooler Fresh water cooling Bore x stroke (mm) : 170 x 180 Displacement (l) : 65.37 Dimensions (cm): 308.6 x 162.2 x 196 Dry weight (kg) : 6900 Type Approved: Yes

LISTING ID: 22764 BRAND:MITSUBISHI MODEL: S12R-MPTA POWER: 880 kW (1180 HP) RPM: 1600 RPM Running Take Out Features: Flywheel housing,Flywheel,Governor,Exhaust system,Turbo,Cooling system,Starter,Water Pump Weight Dry (kg) 5,470 Dimensions (cm) 241 x 158 x 180

For sale are intercoolers from a Mitsubishi S6R. The coolers were subjected to a test run ex works. When they arrived at our place, they were dismantled and stored. Traces of storage available Condition: as good as new (test run ex works) Model: 1A17031D Part Number: 37555-11200 Suitable for: S12R S6R S6R2

CTP-Mitsubishi - DPX 460 – Platesetter with Rip-Mate PC Year of construction: approx. 2007 incl. software and accessories incl. roll films in their original packaging For the production of ready-to-print die-cut polyester printing plates Mitsubishi SILVER DIGIPLATE Suitable for the following printing presses: For Heidelberg QM 46, GTO 46, GTO 52 For Ryobi 5xx For Roland Edelmann Practica 400x510mm For Heidelberg Speedmaster SM 52 – PM 52 2x Supply Rolls 1x integrated register punch for PM52- SM52- Autoplate

spindle diameter: 140 mm x-travel: 12500 mm y-travel: 3000 mm z-travel: 800 mm tool taper: ISO 50 dimension of the ram: - mm turning speed range - spindle: 1000 U/min main drive: - kW table surface area: 3000 x 2100 mm V-axis: 1500 mm table load: 25 t control: TNC 420 total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m equipped with - CNC control Heidenhain TNC 430 - NC rotary table 3000 x 2100mm, 25t - Telescopic steel sheet covers - Panel field (several sizes) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We are selling a Mitsubishi RV-12SDL industrial robot. It was checked before disassembly and is in good condition. The robot was regularly serviced until it was removed. Included is a Melfa CR2DA-701 controller and a teach panel with touch. Find more here - / Contact us at -

Melfa Mitsubishi RV-12SL A Melfa/Mitsubishi RV-12Sl industrial robot is for sale. It was checked before disassembly and is in good condition. The robot was regularly serviced until it was removed. It comes with a Melfa CR3-535M controller and an R28TB teach panel. Find more here - / Contact us at -

Mitsubishi Heavy Industries Ltd Type - SC1F ( Single Cylinder Single Flow ), Condensing Steam Turbine Power : 205.440MW HP Steam : 85 ata, 538 C LP Steam : 5.5 ata 193 C Steam Turbine Generator Model : MB-H Power - 241, 680 KVA Voltage - 16.5KV, 50 Hz

Fuel: diesel, max. speed: 20km/h, max. load: 4000kg, machine dimensions X/Y/Z: approx. 3150mm/1500mm/2300mm, weight: approx. 6200kg, operating hours: approx. 13533h. The handbrake of the must be adjusted. Documentation available. An on-site inspection is possible.

Injection pump in exchange PS6-HL-50 ASSY 48270-00004 Mitsubishi S6R2

Manufacturer: MITSUBISHI Model: Laser Cutting Machine Year of Manufacture: 2017 3000×1500 mm Power: 2.7kw Technology: Co2 2 changing tables AVAILABLE: immediately Find more here - / Contact us at -

Reconditioned turbocharger TD13L part number 49182-03661 fully reconditioned with new bearings and seals for Mitsubishi S 12 R more turbochargers en parts available Perfect Machinery international bv the Netherlands info@perfectmachinery.nl Whatsapp +31 653549259 the Netherlands Whatsapp +34 682511830 Spain

Size: 720 x 1020 mm Impression: 300 Mio. Equipments: Plate Cylinder Cocking blanket wash up device: autom. SAPC semi automatic plate changer Grafix Digitronic powder device wash device for impression cylinders Mitsubishi Delta Dampening Refrigeration & Recirculation System Non-Stop Feeder IPC II Intelligent Press Control high speed separator

Mitsubishi MAF 210/150A Year: 1977 Table Size: 3000 × 3000 mm | Load Capacity: 60,000 kg Axis Travel: X: 14,000 mm | Y: 4500 mm | Z: 900 mm Spindle: Ø164 mm | 4–3460 rpm | 37/45 kW DC motor Control: ISO/EIA compatible | 5-axis interpolation | M-NUX115 DRO Accuracy: ±0.015 mm/m (X/Y), Repeatability ±0.01 mm Included Accessories: • Tool locking (5 pull studs) • Digital readout system • NC controller with startup components • Setup/leveling blocks • Maintenance toolkit • Protective covers Optional Add-ons (upon request): • Chip conveyor and coolant system • Rotary/angled fixturing • Pendant control • Bellows or floor plate systems • Special tooling packages Utilities & Installation: • Power: AC 220V (standard) • Air: 2–7 kg/cm² at 100 L/min • Installation space & foundation info on request

M. No.: 91080-41861 Age : around 1994 Speed: first 70 Sec. / Following 52 Sec. Format (cm): 41,4 x 55 (max.) Equipment / Additional information: Plate width (cm): 22.9 - 41.4 Plate length (cm): 22.0 - 55 Maximum effective image size (cm): 40.4 - 54 Magnification: 100% Lens (cm): 25 Step and Repeat setter: Original side down Digital recording: 0 - 99 Light source: 1 Halogen-Diode, 80 V / 800 W Tank capacity: Activator 0.55 l, stabilizer 0.60 l Power supply: 200 V / 220 V / 240 V, 1.9 Kw High quality plate results: up to 133 lpi