mitre used for sale

Description: BOTTENE bottom manual mitre saw for frames, with tilting guides Approx. Onsite Dimension. (l x w x h): 800 x 700 x 1,100 mm, weight approx.: 300 kg

Description: OMO hand-held bottom mitre saw for picture frames, with tilting guides Approx. Onsite Dimension. (l x w x h): 800 x 700 x 1,400 mm, weight approx.: 300 kg

Key data: 400 mm, 180 mm

Max. diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, automatic feed 600 mm, max. feed length several times 1800 mm, minimum offcut length for single cut 20 mm, minimum remnant length in automatic operation 110 mm, Table turning area for mitre cutting 135 degrees, Total drive power 3.2 kW, Weight without roller tracks 1100 kg, coolant system, the saw is still electrified, Function video available, Operating manual with circuit diagrams and spare parts lists.

Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Vertical metal clamping - Coolant device - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 850 kg - Roller conveyor feed 4000 mm - Discharge – roller conveyor with dimension stop 5000 mm

Blade diameter 350 mm Cutting range: cross-section 90° = 430 mm / cutting height at 90° = 135 mm / mitre cut 45° = 300 mm Suction nozzle diameter 100 mm Motor 2 kW, 400 V Weight approx. 100 kg

TRENNJÄGER Precision Long Cut Saw Model PMC 8-N Ma.-No.: 5287 Built ca. 1992 Semi-automatic long-cutting circular saw with saw blade Ø 600 mm Mitre option on both sides 30 degrees and 45 degrees hydr. swivels with Manual degree scale. Guide rail Arc-shaped on the floor Cutting speed 14-32 and 19-44 Cutting feeds 0-400 / 0-2500 stepless adjustable Max. cutting area at 90° approx. 650 mm wide x 220 mm high depending on the saw blade Hold-down, feed roller conveyor 6000 mm, roller width 650 mm with hydr. Lifting the Front support roller; Discharge roller conveyor approx. 5,000 mm with dimensional scale and hydr. Lift and lowering of the stop, incl. saw blade Ø 600 mm Required transport loading area 1 x 6.5 mtr.; 1 x 4 mtr. Technical data created without obligation to the best of our knowledge. Net price plus VAT plus dismantling and loading costs  ...

Specifications: - Cutting range at 90° around 360 mm - Square 325 mm - flat 500 x 320 mm - Mitre adjustable left + right 90 to 30 ° - Cutting range at 45° around 360 mm - flat 350 x 320 mm - Material support height approx. 800 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Cutting speed 17 - 110 m/min - hydr. Lifting – lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Saw blade cleaning brush - Coolant device - Total drive power 400 V / 1.8 kW - Space requirement approx. W 2600 x H 2000 x D 2100 mm - Weight approx. 2000 kg

Sliding table saw Altendorf F45 Elmo 3 Heavy precision sliding table saw Auto. Sawing unit adjustment high-low swivel / DIGITAL Car. Scoring unit - autom. Adjustment high-low-sideways Motor 5.5 kW 3000/4000/5000/6000 rpm Saw blade tiltable 0 - 45° Saw blade diameter up to 450 mm Trimming length 3000 mm CNC controlled width stop 1050mm DIGITAL Reading width stop DIGITAL Swivelling control panel above table precise. DIGITAL cut-to-length stop Additional universal mitre stop A97 SWISS PATENT Machine from a craftsman's workshop Machine is in TOP CONDITION from stock Lieboch

Description: for saw blades up to 400 mm diameter with saw blade and mitre fence Table approx. 490 x 520 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 600 mm, weight approx.: 80 kg

Description: for saw blades up to 400 mm diameter with saw blade and mitre fence Table approx. 490 x 520 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 600 mm, weight approx.: 80 kg

Description: for saw blades up to 400 mm diameter with saw blade and mitre fence Table approx. 490 x 520 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 600 mm, weight approx.: 80 kg

Description: for saw blades up to 400 mm diameter with saw blade and mitre fence Table approx. 490 x 520 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 600 mm, weight approx.: 80 kg

Description: for saw blades up to 400 mm diameter with saw blade and mitre fence Table approx. 490 x 520 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 600 mm, weight approx.: 80 kg

Description: for saw blades up to 400 mm diameter with saw blade and mitre fence Table approx. 490 x 520 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 600 mm, weight approx.: 80 kg

Description: for saw blades up to 400 mm diameter with saw blade and mitre fence Table approx. 490 x 520 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 600 mm, weight approx.: 80 kg

Description: for saw blades up to 400 mm diameter with saw blade and mitre fence Table approx. 490 x 520 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 600 mm, weight approx.: 80 kg

Description: SPECIFICATIONS Brand: Eisele Type: PSU 470 Year of construction: 1987 Fully automatic undercut metal circular saw Cutting capacity: 200 mm Capacity round: 90º: ø200 mm Capacity round 45º: ø200 mm Saw blade diameter ø450 mm Mitre: 90º Measuring system: 2 mm Cooling pump Hydraulic Unit dimensions: 1100 x 1000x 2000 mm | 2300 x 1100 x 1500 mm weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,100 x 2,000 mm

Description: Serial number: 117628 Cutting speed: 0 - 1000 mm/min Saw blade diameter: 400 mm With feed roller conveyor Length: approx. 2000 mm With outfeed roller conveyor Length: approx. 3000 mm With rotary table for mitre cuts weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 5,800 x 1,300 x 1,800 mm

2 assembled aluminum circular saws make EISELE type LMS III PVMachine -No: 2224 + 2225 built in 1988xa0Technical specifications:Saw blade size: 400 x 4.0 x 40 mmCutting area 90 °: 500 x 140 mmhor. 45 ° L + R: 400 x 140 mmvertical 45 ° L: 500 x 90 mmVenetian blind box profile: 500 x 152 mm(with saw blade 410 mm)Saw blade speed: 2800 rpm.Drive power: 2.6 kWWeight per piece: 670 kgExternal dimensions per piece: 1800 x 800 x 1300 mmWith- hydr. stepless feed- Spraying device2 identical saws LMS III PV - mounted together on a base frame - for cutting larger widths and mitres 45 ° L and 45 ° R!The saws are sold together or single!If the saws are sold together, a designated cabinet is included.The saws come from a CNC controlled profiling machineThe technical. Data concerns 1 machine. When taken over and used in the now inflated state (both machines assembled opposite each other), the machi ...

saw blade diameter: 450 x 32 x 4 mm turning speeds: 3000 U/min : 210 x 170 mm : 130 x 130 mm Capacity 45° rectangular: 145 x 170 mm : 100 x 100 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 2,2 / 3,0 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 850 x 970 x 1370 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting ...

saw blade diameter: 400 x 32 x 4 mm turning speeds: 3580 U/min : 150 x 100 mm : 120 x 120 mm Capacity 45° rectangular: 130 x 80 mm : 100 x 100 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 1,5 / 2,0 kW weight of the machine ca.: 132 kg dimensions of the machine ca.: 720 x 760 x 1330 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting  ...

saw blade diameter: 500 x 32 x 4 mm turning speeds: 3580 U/min : 230 x 180 mm : 135 x 135 mm Capacity 45° rectangular: 165 x 180 mm : 115 x115 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 3,0 / 4,0 kW weight of the machine ca.: 220 kg dimensions of the machine ca.: 980 x 1130 x 1430 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting ...

saw blade diameter: 550 x 32 x 4 mm turning speeds: 3580 U/min : 260 x 200 mm : 155 x 155 mm Capacity 45° rectangular: 180 x 200 mm : 130 x 130 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 3 / 4 kW weight of the machine ca.: 220 kg dimensions of the machine ca.: 980 x 1130 x 1430 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting al ...

Punching machine make EDEL type HM 25/250Machine -No: 222191169, built in 1969Technical specifications:Cutting pressure max .: 25 tProjection / entry depth: 250 mmpunches holes up to dia. : 20, 26, 30, 40 mmin leg irons up to thickness: 10 / 7.5 / 6.5 / 4 mmpunches mitres andNotches in L-irons up to: 40 x 40 x 5 mmStamp size (shaft diameter x length): 30 x 120 mmDrive power: 2 HPWeight: approx. 900 kgExternal dimensions: 1400 x 900 x 1800 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

T60C sliding table saw in CE equipment • Control 3.5" in control panel at eye level included • Handwheel for adjusting the parallel stop from operating position, digital display included • Cutting width 1,350 mm included Trimming table length 3.3 m Cutting width 1,350 mm "2-axis scoring unit, electric Scratch position left/right and scratch height can be positioned via control while the scoring saw is running, electronic display of the adjustment paths; automatic adjustment of the scoring system to each main saw blade; Blade change with ProLock; pneumatically liftable / lowered, separately from the main saw blade can be switched on / off; 0. ...

Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...

Hand lever snips, lever scissors, long-knife tin and round steel snips, tin snips, profile steel snips -Manufacturer: Hoko, lever scissors profile steel scissors type HB 15 -Steel sheet: up to 10 mm -Flat/band iron: up to 18 mm -Round steel: up to 20 mm -Sheet metal: up to 6 mm -mitred: 50 x 5 -Cutting capacity: see photo nameplate -hold-down: -Total dimensions: 670/200/H1670 mm -Transport dimension: 1340/200/H510 mm -Weight: 90 kg

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width:At 90° processing of profiles up to 300 mmTip mitres up to 30° / profile height max. 280 mmNotching depth:at 90° horizontally up to 185 mm / at 90° vertical up to 230 mmMaterial stop:swivel 30° - 90° - 45° Swivel material stop with latching points and digital display Latch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication

Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Cutting area at 90° rectangle: 200 x 80 mm Cutting area mitred at 45° rectangle: 150 x 70 mm Cutting speed: 13, 17, 26 m/min Drive motor: 380 V, 1.7/2.2/2.6 kW Space requirement: 1050 x 1000 x 1680 mm Weight: approx. 850 kg

Pneumatic frame stapling machine for joining two mitred pieces of wood to form frames using steel clamps on rollers., length: 120 cm, width: 100 cm, height: 120 cm, Included: Many brackets

Multi spindle drilling machine Brand: VITAP Type: ALFA DIGIT New machines - QUICK CHANGE SPINDLES - Side reference fences with digital electronic readouts and with manual exclusion for the execution of the system 32 mm drilling holes - Pneumatic cylinder for horizontal/vertical positioning of the boring group - Front caliper with digital electronic readouts - Nr. 2 alu fences with 2 stops each (1500 mm. each) - Quick change fitting of the alu fences with stops - 2 safety clamps inclined 4 degrees - 6 positions turret to adjust the drilling depth (0-80mm) - Height regulation of the boring group by mechanical digital position indicator - Automatic vertical-horizontal depth difference device (10 mm) - Drilling speed adjustment from the panel control - Strengthened steel structure for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropne ...

Semi-automatic boring machine Brand: VITAP Typ: ALFA 35 T New machine Technical data: - One boring head 35 spindles - QUICK CHANGE SPINDLES - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degreese and any intermediate angles) - Frontal/top 51aliper to obtain the same boring measure between horizontal and vertical position - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop - 2 safety clamps inclined 4 degrees - Height regulation of the boring group by mechanical digital position indicator - Stroke regulation by means of 6 positions revolver (turret) (0-80 mm) - Automatic vertical-horizontal depth difference device (10 mm) - Speed regulation of the boring group command by control board - Strengthened steel structures for tilting of the boring group - 1 motor HP. 3 (Kw 2,2) - Sta ...

Dowel hole drilling machine Brand: VITAP Type: ALFA 21 CLASSIC New machine - One boring unit 21 spindles - QUICK CHANGE SPINDLES - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degreed and any intermediate angles) - Front/top caliper to obtain the same boring measure between horizontal and vertical position - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop - 2 safety clamps inclined 4 degrees - Height regulation of the boring group by mechanical digital position indicator; - 6 positions turret to adjust the drilling depth (0-80 mm) - Automatic vertical-horizontal depth difference device (10 mms) - Drilling speed adjustment from the panel control - Strengthened steel structures for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropneumatic circuit by mean ...

Description: The assembly saw with elaborate series equipment and a large cutting range · For mitred cuts on the left up to 45 ° · For sawing steel, stainless steel and aluminum profiles · Cooling system directly on the saw blade · 24 V safety switch in the handle with restart protection · 38 kg Complete weight = easy to transport · Length stop, assembly tool Including saw blade HSS 250x2.0x32mm, 128 Z / ZT 6 + NL Optional: Machine support type 20505 (125, -EUR) Saw blade diameter 250 mm Cutting range at 90 degrees: about 85 mm Cutting range at 90 degrees: square 75 mm Cutting range at 90 degrees: flat 100x65 mm Cutting range at 45 degrees: about 80 mm Cutting range at 45 degrees: square 75 mm Cutting range at 60 degrees: flat 90x60 mm Total power requirement 0.8 kW Machine weight approx. 0.04 t weight approx.: 40 kg, Approx. Onsite Dimension. (l x w x h): 300 x 800 x 750 mm