mitre used for sale

cutting diameter: 360 mm saw band length: 5200 x 34 x 1,1 mm cutting width: 700 mm work height max.: 690 mm Capacity 90° rectangular: 700 x 360 mm : 360 mm : 360 mm Capacity 45° rectangular: 450 x 360 mm : 360 mm : 360 mm : 590 x 360 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 3,67 kW weight of the machine ca.: 1,46 t dimensions of the machine ca.: 2850 x 1,3 x 1800 m Horizontal band saw with linear guideways, ideal for mitre cuts between 90° and +30°. Auto height adjustment sensors ensure that the bow can approach the material at high speed. The hydraulic cutting control makes the bow rise up again after a cut has been made. This process is controlled by a digital counter on the control panel. The bow angle is shown in the digital display. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 x 32 x 4 mm turning speeds: 3400 U/min : 160 x 130 mm Capacity 45° rectangular: 125 x 125 mm voltage: 380 V operating pressure: 6 - 8 bar total power requirement: 1,5 / 2,0 kW weight of the machine ca.: 100 kg dimensions of the machine ca.: 710 x 810 x 1400 mm Standard Accessories Mitre left & right up to 45°, 30°, 22.5°, 15°, 0° location points Intermediate angles via manual lock Twin horizontal pneumatic clamps Pressure regulator for clamps On/Off switch for clamps Machine stand Air gun included Precision angle cutting Ideal for commercial aluminium and general profile cutting Standard conveyor (2 mt. right) Durable cast hub Optional Equipment Measuring conveyor in the desired size (3-6 m right) Assistant conveyor in desired sizes (3-6 m left) 1500 mm long, double-sized caliper bracket Pneumatic and automatic working system  ...

cutting diameter: 450 mm saw band length: 5400 x 41 x 1,3 mm cutting width: 695 mm : 425 x 425 mm Capacity 90° rectangular: 560 x 425 mm capacity 45 degrees: round: 430 mm : 425 x 425 mm Capacity 45° rectangular: 430 x 425 mm : 450 mm : 425 x 425 mm : 560 x 425 mm capacity 60 degrees: round: 320 mm capacity 60 degrees: square: 290 x 290 mm capacity 60 degrees: flat: 260 x 425 mm table height: 690 mm speeds steplessly adjustable: 20 - 100 m/min dimensions of saw-blade: 5400 x 41 x 1,3 mm total power requirement: 4,67 kW weight of the machine ca.: 1,63 t dimensions of the machine ca.: 2,85 x 1,3 x 1,8 m Horizontal band saw with linear guideways, ideal for mitre cuts between 90° and +30°. Auto height adjustment sensors ensure that the bow can approach the material at high speed. The hydraulic cutting control allows the bow rise up again after a cut has been made. This process is control ...

Two cutting speeds - Vice with counter-clamping device - Infinitely variable mitre adjustment (-45° to +60°) - Coolant device - Material support roller - Pin chip remover and chip drawer

cutting diameter: 230 mm saw band length: 2730 x 27 x 0,9 mm cutting width: 240 mm : 230 x 230 mm capacity 90 degrees: flat: 240 x 230 mm speeds steplessly adjustable: 35 - 70 m/min table height: 590 mm total power requirement: 2,0 kW weight of the machine ca.: 590 kg dimensions of the machine ca.: 1,7 x 0,8 x 1,16 The HU 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large workshops and small production lines. separate control panel sawing pressure hydraulically adjustable with cooling system easily moveable with stop gear wheel driven left – right mitre sawing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

speed: 35 - 70 m/min cutting diameter: 230 mm saw band length: 2720 x 27 x 0,9 mm cutting width: 130 mm cutting capacity - flat: 90° / 320 x 130 mm cutting capacity - round: 90° / 230 mm cutting capacity - square: 90° / 230 x 230 mm cutting capacity - flat: 45° / R 220x60 /L 230x140 mm cutting capacity - round: 45° / R 180 / L 220 mm cutting capacity - square: 45° / R 150 / L 190 mm cutting capacity - flat: 60° / 120 x 105 mm cutting capacity - round: 60° /120 mm cutting capacity - square: 60° / 105 mm total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 390 kg dimensions of the machine ca.: 1,35 x 0,9 x 1,3 m The HU 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large wor ...

Key data: 420 mm, 650 mm

Article number: 19-03-028 Manufacturer: Kasto Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1300x800x1400mm Weight: approx. 1000kg Saw blade dimensions: approx. 650x55x2.5mm Cutting range: 90 degrees Round: approx. Ø420mm Square: approx. 300x300mm Flat: approx. 420x420mm Cutting range: 45 degrees Round: approx. Ø320mm Square: approx. 260x260mm Flat: approx. 320x260mm Mitre cut: approx. 0-45 degrees Accessories  Cutting pressure adjustable  Adjustable number of strokes  Coolant device  Footswitch  Turntable Other accessories on request Price and other technical data on request

cutting diameter: 270 mm saw band length: 3160 x 27 x 0,9 mm cutting width: 350 mm work height max.: 910 mm speed: 35 - 70 m/min : 270 mm Capacity 90° rectangular: 350 x 220 mm : 210 mm Capacity 45° rectangular: 270 x 210 mm : 180 mm capacity 60 degrees: round: 150 R mm capacity 60 degrees: square: 100 R mm total power requirement: 1,5 kW weight of the machine ca.: 465 kg dimensions of the machine ca.: 1750 x 770 x 1460 mm The HU 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large workshops and small production lines. separate control panel sawing pressure hydraulically adjustable with cooling system easily moveable with stop gear wheel driven left – right mitre sawing The data for this ...

Bandsaw with left and right tilting / mitre cutting Machine already ready for transport, machine can be viewed on viewing day for correct assessment.

cutting diameter: 230 mm saw band length: 2720 x 27 x 0,9 mm cutting width: 130 mm cutting capacity - flat: 90° / 320 x 130 mm cutting capacity - round: 90° / 230 mm cutting capacity - square: 90° / 230 x 230 mm cutting capacity - flat: 45° / R 220x60 /L 230x140 mm cutting capacity - round: 45° / R 180 / L 220 mm cutting capacity - square: 45° / R 150 / L 190 mm cutting capacity - flat: 60° / 120 x 105 mm cutting capacity - round: 60° /120 mm cutting capacity - square: 60° / 105 mm speed: 35 - 70 m/min total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 410 t dimensions of the machine ca.: 1,35 x 0,9 x 1,3 m The BMSY 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large wo ...

cutting diameter: 320 mm saw band length: 3660 x 27 x 0,9 mm cutting width: 350 mm cutting capacity - round: 90° / 320 mm cutting capacity - flat: 90° / 350 x 320 mm cutting capacity - square: 90° /320 mm speed: 20 - 100 m/min : 260 mm capacity 45 degrees: flat: 250 x 180 mm : 180 mm : 160 mm : 150 x 150 mm : 150 mm total power requirement: 1,5 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1900 x 1200 x 1350 m 280G,320G and 320GL are durable and stably laid out for universal separetion from full materials,pipes and profiles.A fast and precise mitre adjustment is characteristic within the range of 90 deg to 30 deg.The sawing property is situated in-line and becomes manuel strained in the angle of 90 deg. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. These models ...

cutting diameter: 440 mm saw band length: 5200 mm cutting width: 695 mm : 440 mm Capacity 90° rectangular: 610 x 440 mm : 4409 x 440 mm capacity 45 degrees: round: 410 mm : 440 x 440 mm Capacity 45° rectangular: 410 x 440 mm : 440 mm : 440 x 440 mm : 500 x 440 mm capacity 60 degrees: round: 320 mm capacity 60 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 250 x 440 mm table height: mm band speed: stufenlos 20-100 m/min total power requirement: 3,62 kW weight of the machine ca.: 1,54 t dimensions of the machine ca.: 2,8 x 1,21 x 1,87 m Horizontal band saw with linear guideways, ideal for mitre cuts between 90° and +30°. Auto height adjustment sensors ensure that the bow can approach the material at high speed. The hydraulic cutting control allows the bow rise up again after a cut has been made. This process is controlled by digital counter on the control panel. The bow angle ...

cutting diameter: 270 mm saw band length: 3160 x 27 x 0,9 mm cutting width: 350 mm cutting capacity - flat: 90° / 350 x 220 mm cutting capacity - round: 90° / 270 mm cutting capacity - square: 90° / 260 x 260 mm cutting capacity - flat: 45°/ R 180x180/ L 240x160 mm cutting capacity - round: 45° / R 210 / L 240 mm cutting capacity - square: 45° / R 180 / L 240 mm cutting capacity - flat: 60° / 150 x 150 mm cutting capacity - round: 60° /160 mm cutting capacity - square: 60° / 150 mm speed: 34 x 68 U/min total power requirement: 1,5 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 31 m The HU 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large workshops and small pro ...

cutting diameter: 810 mm saw band length: 8200 mm cutting width: mm Control: total power requirement: 4 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 4020 x1630 x 2570 mm Brand: BMSY Type: 810 CGH Year of make: 2019 Capacity round 45º: 555 mm ø Capacity round 60º: 320 mm ø Capacity round 90º: 810 mm ø Capacity square 45º: 700 mm Capacity square 60º: 310 mm Capacity square 90º: 770 mm Capacity rectangular 45º: 555 x 770 mm Capacity rectangular 60º: 310 x 770 mm Capacity rectangular 90º: 810 x 770 mm Mitre: 60 ° Saw blade dimension: 8.200 x 41 x 1,3 mm Saw speed: 20 - 100 m/min Saw motor: 4 kW Machine dimensions (lxwxh): 4.020 x 1.630 x 2.570 mm Machine weight: 3.970 kg Cap. 30 ° round: 700 mm ø Cap. 30 ° straight: 700 x 770 mm Cap. 30 ° square: 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 1020 mm saw band length: 9500 mm cutting width: mm Control: total power requirement: 7,5 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 4500 x 1700 x 2750 mm Brand: BMSY Type: 1020C Year of make: 2019 Capacity round 90º: 1.020 mm ø Capacity square 90º: 1.020 mm Capacity rectangular 90º: 1.020 x 1.020 mm Mitre: 45 ° Working height: 535 mm Saw blade dimension: 9.500 x 54 x 1,6 mm Saw motor: 7,5 kW Machine dimensions (lxwxh): 4.500 x 1.700 x 2.750 mm Machine weight: 6.950 kg Clamp: 1 x 45 ° adjustable Hydraulic clamping including top clamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Very high-quality CNC – controlled two-unit double mitre precision circular sawing machine (heavy version - 2,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale) For precise and rational cutting even of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 370 mm / largest section length 6,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Three CNC axes, electronic inclination of the saw units infinitely variable over the entire inclination range. SCHNEIDER® feed motors and electronic motor controllers. CNC control with Windows 10 operating system and 10.4" color di ...

boring depht: 220 mm; drilling length: 340 mm; height adjustment: 145 mm; drilling head tiltable: -60° bis +60°; mieter fence adjustable: 30° - 90°; motor power: 1,5 / 1,9 kW; speed: 1400 / 2850 U/min; suction connection: 100 mm; machine length: 1200 mm; machine width: 1050 mm; weight: 240 kg; The top model of the LBM range features a drill head tilting 60° to the right and left, making it the perfect solution for assemblies around staircases, window and frame works. The motor is moved single handed and the work table is mounted firmly which allows for processing of oversize workpieces such as doors for example. Properties Maintenance-free linear guiding allows for feed of drill depth Quick lift system allows for effi cient, economical processing without time-consuming winding of crank Smooth, stepless height setting of drill head features fi ne adjustment and ...

servocontroller for Rapid DGL double mitre saws we can deliver this controller suitable with firmware and parameters "plug and play" for all Rapid DGL machines with controller system PCE5000 new- or reparied units with 2 years warranty Contact us for more information

: neu : ca. 10 Wochen ab Auftrags : Türkei : 69200 € : 1266.36 € : 9500x54x1,6 mm : 20-100 m/min : 1020 mm : 1020 mm : 1020x1020 mm : rund 675 mm, quadrat 675 : 535 mm : 0.12 kW : 2.2 kW : 7.5 kW : 4500 mm : 1700 mm : 2750 mm : 5860 kg blade brush control panel hydraulic vice hydraulic blade tension inverter linear ways height adjustment by optical sensor automatic adjustment of blade guide arm, syncrounos to vice movement senitive pressure adjustment coolant pump saw blade user manual in GERMAN or ENGLISH OPTION: hydraulic top clamping € 1.940,-- chip conveyer € 1.540,-- turn table for turning the machine for mitre cutting € 5.730,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I sell a continuous double mitre saw with scoring OMGA TI2500 Super, year of construction 2003. Motor 5kW on each side for both main saw and scorer. Working width max. 1200mm Cutting depth (slot length) 2500mm Underpressure for this and light elements 1 pc. on each side. Self pump. Material pressures top 1 pc. on each side. Available same. Fully operational. All errors fixed.

saw-blade dia.: 315 mm cutting capacity - round: 100/ 90° mm cutting capacity - square: 90 x 90 /90° mm cutting capacity - flat: 85 x 110 / 90° mm cutting capacity - flat: 85 x 85 / 45° mm cutting capacity - round: 100 / 45° mm cutting capacity - square: 85 x 110 /45° mm saw blade turning speeds: 25 / 50 U/min voltage: 400 V / 50 Hz Motor output: 1 kW machine weight ab.: 240 kg Dimensions (L/W/H): 980 x 790 x 780 mm • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 40° left, 45° right The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw-blade dia.: 370 mm cutting capacity - round: 115/ 90° mm cutting capacity - square: 110 x 110 /90° mm cutting capacity - flat: 110 x 110 / 90° mm cutting capacity - flat: 100 x 100 / 45° mm cutting capacity - round: 115 / 45° mm cutting capacity - square: 100 x 100 /45° mm saw blade turning speeds: 22 / 44 U/min voltage: 400 V / 50 Hz Motor output: 3 kW machine weight ab.: 270 kg Dimensions (L/W/H): 980 x 790 x 780 mm • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 40° left, 45° right The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 19100 € : 389.64 € : 4800x34x1,1 mm : 20-100 m/min : 380 mm : 380 mm : 520x380 mm : rund 300 mm, quadrat 300 : 590 mm : 0.12 kW : 0.55 kW : 3 kW : 2850 mm : 930 mm : 1660 mm : 1330 kg 2° inclined band blade brush control panel hydraulic vice hydromechanical blade tension inverter for continous adjustable cutting speed linear guides optical height adjustment pressure adjustment coolant pump saw band security switch heavy duty gearbox 1,2 meter roller table user manual in GERMAN or ENGLISH OPTION: turn table for mitre cuts€ 3.520,-- hydraulic top clamping € 1.170,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 36800 € : 743.36 € : 8200x41x1,3 mm : 20-100 m/min : 810 mm : 810 mm : 850x810 mm : rund 480 mm, quadrat 480 : 585 mm : 0.12 kW : 1.5 kW : 4 kW : 3900 mm : 1200 mm : 2350 mm : 3080 kg 2° inlined saw band optical height adjustment linear guides control panel security switch pressure adjustment hydraulic vice chip brush hydromechanical blade tensioning coolant pump heavy duty gearbox 1,2 m roller table user manual in GERMAN or ENGLISH OPTION: turn table for mitre cuts€ 3.960,-- hydraulic top clamping from above € 1.410,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 660 mm saw band length: 9000 x 54 mm cutting width: 1,6 mm Capacity 90° - round: 660 mm Capacity 90° - square: 650 x 650 mm Capacity 90° - rectangle: 650 x 1080 mm Capacity 45° - round: 660 mm Capacity 45° - square: 650 x 650 mm Capacity 45° - rectangle: 650 x 670 mm Capacity 30° - round: 410 mm Capacity 30° - square: 410 x 410 mm Capacity 30° - rectangle: 650 x 410 mm total power requirement: 5,5 kW / 2775 Nm weight of the machine ca.: 7100 kg dimensions of the machine ca.: 2500 x 2200 x 4500 kg The KSY 2DT 650 is a semi-automatic and column-guided horizontal bandsaw. The machine also has a driven roller table, which is 2 metres long on the front has a spray mist has a spray mist cooling system. Equipped with a linear guided saw blade, the KSY 2DT 650 can perform precise and fast Mitre cuts. Standard Specifications - Swarf Brush - Hydraulic Blade Guide - Hydr ...

Cutting height at 90Â: 125 mm; Cutting length: 570 mm; Horizontal mitre range: 0 - 45Â; Miter range vertical: -45Â to +45Â; Roller conveyor / support table: no; Saw blade diameter: 400 mm; Speed: 2800rpm; Motor power: 3 kW; Engine brake: yes; Suction port: 60mm; Machine length: Machine width: Weight: 180kg;

Cutting height at 90Â: 200 mm; Cutting length: 570 mm; Horizontal mitre range: 0 - 45Â; Miter range vertical: -45Â to +45Â; Roller conveyor / support table: no; Saw blade diameter: 565 mm; Speed: 2800rpm; Motor power: 5.5 kW; Engine brake: yes; Suction port: 100mm; Machine length: Machine width: Weight: 310kg;

SAC CS40 sliding table saw Year of construction: 2008 S/N 312029 Cutting length 3,200 mm Anodized aluminum sliding table 3200 x 420 mm, Locking mechanism for easy plate loading in any position Steel sliding system Main saw mandrel (30 mm) 45° swivel Electric raising and lowering of the main sheet. Main motor 5.5 kW, self-braking motor Cutting speeds 2,600 - 4,000 and 5,600 rpm Saw blade diameter max. 400 mm Maximum cutting height 130 mm ( 90° ) 100 mm ( 45° ) Rip fence 1,500 mm Scoring saw motor 0.75 kW 120 mm (diameter scoring saw blade - 8,000 rpm scoring unit with external adjustment) Square length stop with stops, Extension table with mitre stop and sliding boom support. 400 V, 50 Hz Weight 820 kg CE, marked

Weibert HX 260-CE 5-fold station wagon Motor 3x 3HP, 400V, 50Hz Saw blade diameter 250mm Cutting height 85mm to 90° Cutting height 55mm to 45° Milling mandrel 3000/6000 rpm Sliding table 1450 x 320mm Cutting length 1200mm Mitre stop Eccentric clamp Weight: 485kg G&RO-HX260-CE

Cutting height at 90Â: 85 mm; Cutting length: mm; Miter range horizontal: -; Vertical mitre range: -60Â to +60Â; Roller conveyor / support table: no; Saw blade diameter: Speed: 2800rpm; Motor power: 2 kW; Engine brake: yes; Suction port: 100mm; Machine length: Machine width: Weight: 110kg;

-Exhibition machine-Double trolley swivel one. Height and swivel adjustment Rip fence with man. Fine adjustment angle mitre stop Extraction hood large Vorritzer Basic with LED lighting---------- Technical data ---------- swivel range: 0 - 46 Carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm max. saw blade : 315 mm Cut-to-length stop extendable to: 3,450 mm Speeds: 3,600 / 4,200 rpm Engine power: 5.5 kW (7.5 hp) Working table height: 880 mm Suction nozzle : 120 + 80 mm ; new exhibition machine

Universally applicable frame and slotted hole drilling machine Especially for window construction and universal use through pneumatic height adjustment Double-hole drilling on two levels in one clamping operation Motor power 1.5 kW Starting the engine with a practical handle switch With two-jaw chuck 1 - 20mm from Röhm Pneumatic adjustment of the processing height, dowels on two levels without moving. The desired drilling heights can be set for each drilling level with a digital counter, and switching is then carried out pneumatically from the front Transverse adjustment 430mm, infinitely variable or in 12mm increments Maximum height adjustment approx. 100mm above table height Drilling stroke approx. 150mm 2 pneumatic workpiece clamps Grid rail for quick adjustment laterally in 12mm grid Stop for longitudinal adjustment during slotted hole milling 2 swivelling workpiece  ...

Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 90 x 90 mm Mitre cutting area at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Space requirements: 850 x 600 x 1600 mm

Cutting height at 90Â: 170 mm; Cutting length: 430 mm; Miter range horizontal: 45Â-90Â-25Â; Vertical mitre range: 60Â - 90Â - 30Â; Swivel adjustment with crank: yes; Roller conveyor / support table: yes; Saw blade diameter: 420 mm; Speed: 2800rpm; Motor power: 3 kW; Engine brake: yes; Suction port: 100mm; Length of roller conveyor: 2 x 1500 mm; Machine length: 4000 mm; Machine width: 1250 mm; Machine height: 1550 mm; Weight:

Powerful double mitre saw, ideal for mass cuts of plastic and aluminium profiles at 90° or 45°. Saw blade diameter 550 mm, 4,500 mm length, and 1-axis control E 590/1. Proven elumatec principle of "sawing from below" for optimum accessibility and the best possible use of the saw blade. - Minimized calculation effort thanks to external dimension cut. - Pneumatic angle positioning 90° or 45". - Protective shields with automatic lowering over the sawing areas. - Standard with suction nozzle at the top and bottom. - Steel machine bed in post-and-beam construction. PC control E 590/1: - Industrial PC 1-axis control E590/1 for the cutting length (X-axis) - Drive-independent absolute measuring system - Pneumatic locking in position - Robust, low-wear direct drive of the mobile sawing unit - Ergonomic arrangement of the control unit - Positioning accuracy +/-0.1 mm pe ...

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 26300 € : 6000x41x1,3 mm : 20-100 m/min : 560 mm : 560 mm : 750x560 mm : rund 410 mm, quadrat 410 : 590 mm : 0.12 kW : 1.1 kW : 4 kW : 3400 mm : 1000 mm : 2050 mm : 2045 kg 2° inclined band linear guides control panel material limit shaft coolant pump 1200 mm roller table hydraulic vice hydromechanic band tensioning inverter presser adjustment band brush optical height adjustment security switch operating manual in Englisch OPTION: turn table for mitre cuts€ 3.700,-- hydraulic top clamping from above € 1.280,-- micro cooling unit € 890,-- laser cutting line € 560,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Profile Machining Center Machining length approx. 8,500 mm, max. profile size 300 x 200 mm, Travel XYZ = 9,300 x 1,000 x 800 mm, Sawing unit (mitre cuts), 4-axis drilling/milling unit (16 kW, 18,000 rpm), tool changer 24-fold option pendulum operation, option Clamping element displacement, preparation Flowdrill, , safety enclosure, BECKHOFF control panel (programming software CamQuix), refrigeration unit IDEA 16CCM-50-A-F-3 (No. C2019010009, year of construction 2019), Control cabinet, machine under power in production use Original price 176.500 EUR

Saw blade Ø: 275 mm Cutting range at 90° round: 90 mm Cutting area at 90° rectangle: 75 x 75 mm Mitre cutting area at 45° rectangle: 75 x 75 mm Saw blade speed: 40/80 rpm Drive motor: 380 V, 0.5/0.9 kW Space requirements: 700 x 600 x 1580 mm Weight: approx. 180 kg

cutting diameter: 185 mm saw band length: 2.080 x 20 x 0,90 mm cutting width: 100x185 mm connected load frequency: 230 V band speed: 35 und 70 stufenlos m/min mitre joint 90° (angle-iron till): 60 ° total power requirement: 2,35 KW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280 x 550 x 1480 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw ...

Cutting range Round 340 mm Double mitre Saw blade 5.000 x 34 x 1.1 mm Speed range 20 - 80 m/min

Weibert WJ-KS30S Oscillating edge grinding machine WEIBERT WJ-KS30S with polished veneer 400V 3 KW (4 HP) n=2840 min Work table 960x350 mm Table height adjustment 230 mm Sanding belt back panel 1050x200 mm Belt speed 20 m/sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 HP) Can be switched on/off Machine table and guides made of GREY CAST IRON Quick adjustment of the swivel 90°-45° with degree display Weight of 400 kg Suction nozzle 120 mm Roll pull-out table widening Belt width 200 mm WJ-R00300 Optional at extra charge: Roll extension table widening WJ-R00101 Mitre stop WJ-R00102 Feeder console WJ-R00204 Driving device WJ-R00103

Sliding table saw Altendorf F 45 YOC 2011 Trolley length 3200 mm, double trolley Saw blade max Ø 500 mm Motor power: 5.5 kW Scoring unit 0.75 kW, 2 axes adjustable Electromotive height and swivel adjustment 0 - 46° for the main saw blade Cutting width at rip fence 1050 mm adjustable parallel and mitre stop Table extension 840 mm

Weibert WJ-K315-A Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° with motorized height adjustment and swivel of the sawing unit WJ-800100-A Special price: Options: Scoring unit with motor 0.75 kW WJ-800105 Mitre stop 900 mm WJ-400207 Suction pipe with hose WJ-400104 Saw motor 400 V / three-phase / 4.0 kW WJ-800109 Eccentric clamp WJ-500103 Format table L= 2743 mm WJ-800102

Weibert WJ-K315-A Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° with motorized height adjustment and swivel of the sawing unit WJ-800100-A Options at extra cost: Mitre stop 900 mm WJ-400207 Suction pipe with hose WJ-400104 Eccentric clamp WJ-500103 Scoring unit with motor 0.75 kW

Key data: 230 mm

- Mitre cut: 90 -/+ degrees - Clamping range: 90 mm - Speed levels: 36 / 72 m/min - Saw blade diameter: 230 (max. 250) mm - Total power: 0.75 kW - Machine weight: 180 kg - Dimensions (W x D x H): 0.8 x 0.6 x 1.6 m - Condition: good Details Miter, automatic pneumatic clamping

Carriage length: 3200 mm; Cutting width at the width stop: 1250 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 125 mm; Vorritzer: yes; Height adjustment saw blade: electric; Swivel adjustment saw blade: electric; Width stop adjustment: electric; Display Saw Blade Angle: Digital; Display Cutting Height: Digital; Display Width Stop: Digital; Display cutting ruler: Digital; Saw blade diameter: 400mm; Speeds: 3000 / 4000 / 5000 rpm; Motor power: 7 kW; Engine brake: yes / automatic; Suction port: 80mm and 120mm; Machine length: 3400mm; Machine width: 2000mm; Weight: 1000kg; Z4COMFPACK EXTENDABLE SUPPORT OPTIONÂ INDEX SYSTEM FOR Z400 FRAME TABLE Z4DIGIFL1 DIGITAL DISPLAY OPTION ON Z400 CROSS FENCE Z4LED OPTION LED STRIP AT SCORINGÂ Z4RITS OPTION AUTOMATIC SCORING TABLE 1Â Z4BA EXTRA SUPPORT TABLE WITH STOP AND SCALEÂ Z4LEADER120 QUICKLY ADJUSTABLE SCORIN ...

Cutting height at 90Â: 135 mm; Cutting length: mm; Miter range horizontal: -; Vertical mitre range: -60Â to +60Â; Roller conveyor / support table: no; Saw blade diameter: Speed: 2800rpm; Motor power: 2 kW; Engine brake: yes; Suction port: 100mm; Machine length: Machine width: Weight: 110kg;

Manufacturer: Brandt KDF mit Fügefräsen, Type: Profiline KDF 670, Year: 2005, Barcode: 0,5-3, Min-max edge material mm: 120-3500, Work piece width min-max mm: 10-55, Min.-max. workpiece length in mm: 10-60, Edgeband height max mm: 20, Luftkissentische Einlauf: Umstellung von 2mm auf Fase automatisch, mit Vakuum: yes, mit Klemmung: yes, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, PU-EVA: yes, Laser technology: yes, kW Leistung Laser: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, with tool holders: yes, Nut Motore: yes, Type of scraper: yes, Number of tools per tool-magazine: yes, Number of sanding units: yes, Buffing unit: yes, Top pressure belt/roller: yes, Workpiece support: yes, Workpiece return: Rolle, Return type: yes, System dismantled: ca. 6700, FREE TEXT: ZHR 01, : ink Rückführung/ Verfügbarkeit ca. ab Jul ...