mitre band saw used for sale

Mitre Cold Circular Saw EISELE Type VMS 300 Masch. No. 4615 Type No. 4110 3M 0002 Year of construction 1995 Sawing range at 90 (round) 100 mm sawing range at 90 (flat) 120 x 80 mm sawing range at 45 (round) 90 mm sawing range at 45 (flat) 80 x 80 mm saw blade diameter 300 mm Saw blade speed 40 / 80 rpm. 2 stages mitre cut +45 to 90 to -30 motor power 1 and 1.2 kW mains connection 400 volts, 50 Hz - coolant device - mounted saw blade approx. 270 mm Space requirement L x W x H 700 x 700 x 1600 mm Weight 212 kg very good condition; used

–Manual – CE certificate – after technical inspection – very good condition – year of production 2014 - standard feeding table 3m +3m additional = 6m TECHNICAL PARAMETERS: main motor 22 kW and 30 kW length of the feeding table 6000 mm maximum log diameter 350 mm minimum log diameter 60 mm feed rate adjustable on the inverter feed speed range 0 – 25 m/min feed motor 1.5 kW two rows of pawls diameter of discs 500 mm spindle diameter 70 mm spindle support sawdust collection conveyor belt three take-up rollers stub diameter 2 x 200 mm dimensions length/width/height 300 x 245 x 180 cm weight ~ 3000 kg

Hardly used ( year of construction 2021) Metal Band Saw with Swivel Frame from Optimum OPTIsaw S 300DG Specifications Saw blade 2750 x 27 x 0.9 mm Saw blade speed 35 + 70m/min Cutting angle -60 – +45° Cutting range 0° round 255mm Square 190mm rectangle horizontal 190 x 310mm Cutting range -45° round 220 mm Square 190mm rectangle horizontal 135 x 190mm Cutting range -60° round 135mm square 135 mm rectangle horizontal 135 x 135mm Drive power 1.5 KW - 400 Volt Weight 335 kg Dimensions (LxWxH) 1680 x 1600 x 1300 mm Scope of delivery: material stop, bi-metal saw blade, machine base, coolant pump Properties Double mitre up to +45° and -60° Silent operation Heavy-duty cast design High cutting accuracy due to vibration-free operation Ball-bearing saw blade guide Chip brush Automatic shutdown of the saw a ...

Cutting capacity round / square 90°: 255 mm / 210 x 210 mm 90° flat cutting area: 310 x 210 mm Cutting capacity round / square 45 ° R: 220 mm / 210 x 210 mm Section flat 45 ° r: 220 x 200 mm Cutting capacity round / square 45 ° L: 230 mm / 200 x 200 mm Cutting capacity 45 ° L: flat 230 x 200 mm Cutting capacity round / square 60 ° R: 135 mm / 135 x 135 mm Section flat 60 ° R: 135 x 135 mm Working height: 930 mm Band saw blade dimensions: 2750 x 27 x 0,9 mm Cutting speed: 35 / 70 m / min Coolant pump: 100 W S1 motor power output 100%: 1.5 kW Motor power S6 40%: 2.2 kW Voltage: 400 V Machine dimensions (L x D x H): 2000 x 1250 x 1900 mm Approximate weight: 350 kg Features: -Professional band saw for General workshop use, fitters... -For cutting of hollow profiles and full materials, stainless steel, tool steel,... -Twist-free, heavily dimensioned saw frame mad ...

Max cutting length: 4000 mm Cutting height: 200 mm Cutting width: 130 mm Power: 5,1 kW Weight: 650 kg

Specifications: Sawing area 90° round / flat / quad: 265 / 300 x 150 / 200 x 200 mm 75° left/right round / flat / quad.: 265 / 280 x 150 / 200 x 200 mm 60° left/right round / flat / quad.: 250 / 250 x 150 / 200 x 200 mm 45° left/right round / flat / quad: 200 / 200 x 100 / 180 x 180 mm 30° li round / flat / quad: 130 / 130 x 100 / 125 x 125 mm Cutting speed: 17 - 100 m/min Band saw dimensions: 3280 x 27 x 0.9 mm Working height: 950 mm Drive power: 2.0 kW Connection: 400 V Weight, approx.: 390 kg Dimensions, (LxWxH), approx.: 1580 x 930 x 1400 mm Equipment: - Can be swivelled left and right - Highly stable saw frame - Easy to use - Emergency stop push button -CE

Year of construction: 2016 Double Miter Saw Manufacturer: ELUMATEC, Type: DG 244-E580/5 E580 Control with automatically swivelling workpiece support, roller conveyor and accessories

- Cutting angle adjustment 0° - 45° - Robust touchscreen control panel - Automatic workpiece feed - Torsion-resistant double column construction - Hydraulic infeed of the saw bar via chrome-plated column guide - Slightly inclined saw handle for improved cutting performance and increased saw blade life - Double, hydraulic workpiece clamping - Infinitely variable adjustment of the cutting speed - Programmable, automatic angle positioning in 1° steps from 0° to 45° - High angular accuracy due to precise and stable saw blade guides - Automatic belt breakage control - Belt speed is infinitely variable and is shown on the display - Machine with signs of wear and damage to the paintwork - no functional impairment

Specifications: - Manual band sawing machine - Saw blade dimensions 2925 x 27.0 x 0.9 mm - 2 cutting speeds N 36 / 72 m/min - Max. clamping range 355 mm - Mitre adjustable left + right up to 30 ° - Cutting range - 90° round 270 mm - Square 260 mm - Flat 350 x 240 mm - 45° li + right round 200 mm - Drive 400 V / 1.9 kW - Coolant device - Feed – roller table 2000 mm - Weight approx. 550 kg - Space requirement approx. W 1100 x H 2000 x D 1600 mm

Inv. Num. : 7509 Type: DG 79/31 M Producer: Elumatec Created: 2009 Parameters: Maximum sawing speed: 2800 1/min Cutting length: 520 mm Wheel diameter: 380 mm Motor power: 3 kW

really well maintained, equipped with simple CNC control. Saw blade diameter 400 mm This section at 90 ° round 130 mm rectangle 240 x 85 mm flat 180 x 70 mm in MITRE at 45 ° profiles Portrait 120 x 55 mm Feed length with double lifting device to 2 cutting speeds 10/20 m / min. Speed infinitely variable 0-1000 mm / min. Drive motor 400 V, 1.7/2,6 kW Weight 1350 kg Dimensions W x D x H 2750 x 1500 x 1900 mm Accessories: Spray cooling device "Mini pos 807", Blade, roller conveyor, manual.

Type USK 1710 Payload 150 kg Measurements (91-171)x60x(59-82 cm) Table size 60x46 cm Weight 15,5 kg

Type KAP 255XJL Cutting height 45?-90?: 80 mm Cutting height swing 45?: 40 mm Cutting lenght 90?: 430 mm Cutting lenght tilt 45?: 310 mm Motor power S1 1,8 kW Saw blade speed 4800 rpm HM-saw blade teeth 254x30x3 mm Transport dimensions 850x520x410 mm Weight 20 kg

automatic double mitre saw OMS SALVARANI INVINCIBILE OK 330 CE standard : Yes n.02 motors . power Hp 3 each one blades diam.mm.330 max. useful cutting length mm.3000 max. useful cutting width 90° mm. 165 max. useful cutting width 45° mm. 115 max. useful cutting heigth mm.115 volt. 380/50 weigth kgs.650

Graule ZS 200N Cutting and miter circular saws Motor 400 V / 3.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range: horizontal 45°-90°-20° Miter range: vertical 60° -90°-45° Saw blade s. 520 mm Suction nozzle 100 mm Weight 310 kg G&GA-ZS200N-3KW Underframe optional

CNC double miter saw make ANTON type ADS-ENMachine -No: 39091, built in 1991For efficient sawing of aluminum and PVC profilesSaw blade diameter: 450 x 30 mmFeed infinitely variableAir consumption: 7 atm 200 l / minBlade speed: 2800 rpm.Cutting length: 260 - 5000 mmCutting area square: 265 x 100 mmCutting area round: 150 mmDrive power: 2 x 2.25 kWExternal dimensions: 6150 x 1200 x 1750 mmWeight: 1460 kgWith:- Control De Man 408- automatic pivoting from 45 ° to 90 °used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double miter saw make ELU type DG 102Machine -No: 23122 built in 1981for efficient sawing of aluminum profilesSaw blade diameter: 420 mmCutting area straight for profiles approx: 100 x 240 mmxa0xa0xa0 at 45 ° approx.: 100 x 180 mmSection length up to: 4500 mmSaw blade speed: 2800 rpm.Saw blade motor: 2800 rpm, 3 kW eachelec. Connection: 380 V, 6 kWDimensions: 1200 x 6000 x 1350 mmWeight approx: 1000 kgWith- compl. elec. and pneumatic. Facility- pneumatic. tensioning device- 2.5 m roller conveyor on movable saw carriage- saw bladesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Distance sawing max 90° mm: 2800 Diameter saw blade mm: 300 Main motor kW: 3.3 Weight Kg: 500

-Round capacity: 90 mm; -Volume Rectangular: 120 mm; -A fixed and a movable head; -Displacement approx. 6 m (with size scale); -2800 rpm; -The brackets of the guide rails are broken. But can be replaced; -Please note! The brackets of the guide rail are broken, small brackets are broken during transport, but these are replaceable.

Includes wooden table and tool grinding machine

Max. saw blade diameter: 470mm, max. workpiece diameter: 150mm, connected load: 8.5kW.

Length: 900mm, width: 800mm, height: 920mm, weight: 330kg.

Main functions: Precision cutting of profiles at various angles. Operating pressure: max. 1MPa, air consumption: 28l/cycle, weight: approx. 2150kg.

Swivel range inwards: 90°-45°, saw blade diameter: 500mm, min. cutting length: 400mm at 90° and 45°, max. cutting length: 6000mm, saw blade speed: 2800rpm. Air consumption per cycle with/without spraying: 64l/40l. Documentation available. On-site inspection is possible.

2-spindle cross-cut saw for series production for precise shortening of materials. The machine can be manufactured in different versions depending on the specification and requirements. Specifications: Motor power: 2.2kW / 3kW Material length: 500 - 1500 mm Possibility to tilt the discs: YES Machine manufactured on request

Aluminum Double Miter Saw Fabr. ELUMATEC Type DG 79Year of construction 1982Saw blade diameter: 380 mmSaw blade hole: 32 mmCutting length: 4500 mmSwivel range R + L: 15 ° 22.5 ° 30 ° 45 °Angle: 0 - 45 °Section range: sh. sectional diagramCompressed air connection: 7 barSaw blade speed: 3800 rpm.smallest cutting length: 500 mmDrive power: 2 x 3000 WWeight approx: 490 kgwithout controlused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC double miter saw make ELUMATEC type DG 104Machine -No: 25725 Year 1990Saw blade diameter: 420 mmSaw blade hole: 30 mmCutting length: 6000 mmSlope range: 45 + 90 °Saw blade speed: 2800 rpm.Section range: sh. diagramkl. Cutting length: 335 mmPower: 2 x 4000 WDimensions: 6050 x 1600 x 1450 mmWeight approx. 1520 kgWith- CNC control E 255used from an operating resolution, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC Double Miter Saw Fabr. ELUMATEC Type DG 104Machine -No: 25591 Year 1989Saw blade diameter: 420 mmSaw blade hole: 30 mmCutting length: 6000 mmSlope range: 45 + 90 °Saw blade speed: 2800 rpm.Section range: sh. diagramsmallest Cutting length: 335 mmPower: 2 x 4000 WDimensions: 6050 x 1600 x 1450 mmWeight approx. 1520 kgWith- Control E 200- Roller conveyorused from an operational resolution, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC Double Miter Saw Fabr. ELUMATEC Type DG 104Year of construction 1992Saw blade diameter: 420 mmSaw blade hole: 30 mmMax. Cutting length: 6000 mmminimum cutting length at 90º + 45º: 360 mmPivoting range inwards: 90º - 22,5ºInclination range inside: 90º - 45ºSaw blade speed: 2800 rpm.Section range: sh. diagramPower: 2 x 4.0 kWDimensions approx: 7500 x 1600 x 2200 mmWith- CNC control - screen -- separate control cabinetused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double miter saw make RAPID type DGLSeries 3737, make -No: 2748 built in 1978with drilling and milling machine type BFA series 1109, make -No: 301 built in 1978Sägeblattdrm. : 420 mmCutting length: 4500 mmSaw blades tiltable: 90 - 45 °Max. Cutting height: 150 mmDrive power sawing units: 2 x 3 kWDrive power drilling unit: 1.1 kW (2700 rpm)Motor longitudinal adjustment sawing units: 0.75 kWExternal dimensions L x W x H: 7000 x 1100 x 1700 mmfor olive drilling and lock boxWith- Programmable control MTH for length- 2 revolving extraction systems- Drilling unit BFA (for drilling and milling of handle and lock machining)used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best r ...

Double Miter Saw Make EISELE EMMEGI Type VISA -2 TU / 5Fabr. -No: 148402, built in 1988Saw blade diameter: 450 mmSection length min.:240 mmSection length max .: 5000 mmDrive power: 2 x 2.5 kWOutside dimensions approx. 6500 x 1400 x 1600 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC double miter saw, make ELUMATEC type DG 104Masch. -No: 25647 Year of construction 1989Technical specifications:Saw blade diameter: 420 mmSaw blade bore: 30 mmCutting length: 4000 mmTilt range: 45 + 90 °Saw blade speed: 2800 rpm.Cutting area: sh. diagramsmall Cutting length: 335 mmPower: 2 x 4000 W.Dimensions: 6050 x 1600 x 1450 mmWeight: 1520 kgWith- CNC control E 255used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double miter saw make RAPID type DGLSeries 6954, machine -No: 4066 built in 1989Technical specifications:Saw blade diameter: 6000 mmCan be swiveled up to: 45 °Section length up to: mmSaw blade speed: 2800 rpm.Unit adjustment: via spindle with handwheelSaw blade drive per unit: 2 x 3.5 kWelectrical connection: 380 VExternal dimensions L x W x H: 7200 x 1500 x 1900 mmWeight approx: 400 kgwithout controlusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC double miter saw make RAPID type DGLYear of construction 1990Technical specifications:Saw blade diameter: 380 mmSection length: 4800 mmcan be swiveled up to: 45 °Saw blade speed: 2800 rpm.max.cutting height: 210 mmDrive power: 2 x 2.2 kW eachWeight approx: 700 kgExternal dimensions approx .: 1250 x 5850 x 1200 mmwith- CNC Control- pneumatic clamping cylinderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double miter saw Make Pressta Eisele Type Norma LMS D 400 Masch. -No: 222633 Year of construction 1992 Technical specifications Cutting length 4000 mm Saw blade diameter 400 mm Speed 2890 rpm. with - Neig and tiltable - Digital length display Used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Order No. 6712 TECHNICAL DATA - min. board length after formatting 800mm - max length of the board after formatting is 1300mm - max board width 270mm - max board height 70mm - max diameter of the disc 350mm - shield on the discs (serves as a pressure) - spindle diameters 60mm - length of spindles working part 260mm - main engine power 4kW - feed motor power 0.75kW - 2 feed speeds - dimensions of the table top 1820x15100mm - diameter of the extraction connector 2x100mm - overall dimensions: length / width / height 1900x1900x1400mm - weight 578 kg ADVANTAGES - Polish production - for processing a pallet board - used saw, very good condition Net price: PLN 14900 Net price: EUR 3311 Net price, calculated at the rate of 4.5 PLN / EUR (with greater fluctuations in the rate, the price may change)

Manufacturer: H&M HM-ZN 8000-R automatic miter and beam saw Type: ZN-8000 R Motor: 6 kW Saw blade: ø600 - ø700 mm Axle: ø30 Saw height: 250mm Angle adjustment: 0 dead 180° Tilt: 0 tot 45° Zenter line: 200mm Printer: 2 boven- en 2 zijdrukkers Feed table: 9500mm Export table: 6000mm Table castors: Incoming and outgoing conveyors are driven Feed: 55 m/min. Length stop rack with 0.4 m/s feed Repeatability: 0.1 - 1 mm (naar wens instelbaar)\ Noise: 81 dB Suction: ø200 mm weight 1350KG Powers: 380V, 3 Ph, 35A + 220 V, 16A

Wegoma 350 Double miter saws - Writing saws Type: 350 Year of construction: Motor: 2 2.2 kW (3 PK) Saw: ø330 mm Speed: 2800rpm Length: 3,500 mm Panning: 0 - 45° Inclination: 0 - 45° Werkst. Fixation: Pneum. Clamping Semi-automatic pneumatic saw movement Condition: Functionally tested

Double cross-cut saws Hüllhorst Year of construction: 1999 Cutting length 3000mm Cutting width 3000mm Scoring on each side Scoring is pneumatically evasive Saw blade diameter max. 400mm Saw blades are not swivelling The width of sawing units can be adjusted by motorisation

Double mitre saw Omga for glazing beads Ready for pickup, price EXW The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Double mitre saw STRIFFLER-STRIMA 2750 Year of construction: 1992 S/N 289 Manufacturer: Striffler GmbH Germany Cutting width 2,200 mm Cutting height at 45° 240 mm 2 saw motors 1.1 kW, 2800RPM / 380 V 50 Hz Saw blade 250mm Rear-cutting design Width adjustment by electromotive Saw feed pneumatic Length adjustment by handwheel Pneumatic clamping device Length 2940 mm Width 1,100 mm Height 1,220 mm Weight approx. 360 kg

Double mitre saw Hoffmann type MS 35 Specifications: Cutting width (mm): 85 Cutting height (mm): 85 Motor (kW): 2 x 2,2 Horizontal clamp: 1 set Material supports: 1 set

SPECIFICATIONS: Working range mm: min 220 - max 1200 Saw blade diameter mm: 350 Bore mm: 30 2 motors, 1.5 KW each Vertical and horizontal saw blade inclination 35° With drawer for accessories