mills machines used for sale

Impact forming mill is used for dry and fine grinding of brittle materials with a hardness of up to 3 Mohs. the impact fine grading mill combines efficient impact grinding with efficient classification in one unit. The supplied materials are thrown into the liner by the milling tools at a speed of 60-130m/s and then shredded. the ground material is transported to the integrated cashier for processing by means of air and rotation of the grinding tool. the fineness can then be infinitely adjusted via the speed of the classifier. Particles that are too large are sorted out by classifiers and end up in the grinding zone for continuous comminution.

Features and advantages of the classifier mill ACM: • Grinding and classifying in one machine. • Excellent selectivity, steep particle size distribution. • Infinitely adjustable fineness. • Flow-optimized, conical classifier wheel guarantees product without oversize grain and low wear compared to cylindrical classifier wheels. • Cool and gentle grinding due to high air flow. This makes the ACM ideal for processing temperature-sensitive products. • Deflection area in the grinding chamber lid: classifier gap flushing not required. • Low noise emission. • Very good running characteristics due to the belt-driven grinding disc. Bzc3pyxj32 • Easy to maintain: motors and bearings easily accessible. • The lid lifting device allows quick access to the grinding and viewing zone for cleaning and retrofitting. • Extremely compact and space-saving design. • Option ...

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank : 50 litres Power : 45 kW Voltage : 380 V Weight : 1050kg

Qty. 1 Second-hand 4-Hi reversing rolling mill – Electrical equipment and cooling unit are not included! Mfc.: MINO Type: 4-Hi Reversing Mill LLQ500 Built: 1970 Revamped: 2011 by MINO Strip width: 420 mm Thickness: 0.2 – 4.0 mm Speed: 20 – 400 m/min. Coil weight: 8.0 T Coil: ID 500 mm Coil OD: 1800 mm Rolled material: Carbon steel (can be used for other applications too)

Bead mill Manufacturer: Drais Type: PM 1 Factory number: 50215 Y.O.M.: 1980 Power: 0.75 kW in Ex-protection Power pump: 0.12 kW in Ex-protection very good condition Dimensions LWH: 800 x 500 x 850 mm Weight: approx. 100 kg

Scharmann boring mill Ecocut 1.1 TDV 3 / Retrofit in 2015, Year of construction 1983 / Retrofit 2015 by Scharmann Control Siemens 840 D, Travel X/Y/Z/W 2000/1450/1400/600 mm, Table clamping surface 120 x 1600 mm, Enclosure open at the top installed in 2015, Feeds up to 6 m/min, spindle speed up to 3,000 rpm - 30 KW, Machine does not need a foundation ! due to the self-designed polymer bed, max workpiece weight 12,000 kg, Machine weight 24,350 kg, complete documentation, Additional equipment: A CNC-controlled face plate is integrated in the drill quill. With this device, contours up to Ø600 can be rotated Services provided during retrofitting The machine was electrically and mechanically overhauled by Scharmann, most recently in 2015. During the overhaul, the entire electrical system was replaced and the control system was ...

Granulator - Wittmann CM5 (3 pcs.) Location: Lodz, Poland Year of construction: 2011 Slow-moving granulator with gearbox Power: 1.1 kW 2 stator knives, 2 x pushers, rotor with the cutters Hopper inlet: 240x210 mm Grinding chamber opening: 240x116 mm Granulator without sieve, regulation of the grinding thickness by means of the hole adjustment between milling and stator knife Granule mill is used for grinding very hard details, waste - just like the crusher Hole for material case is prepared for connecting with suction conveyor All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

Granulator - Wanner D25.38 s Location: Lodz, Poland Year of construction: 2011 Low-speed granulator with gearbox, with cyclone and dust removal Power: 7.5 kW 2 stator knives, 18 rotor knives, the sieve - interchangeable Hopper inlet: 430x380 mm Grinding chamber opening: 390x290 mm It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is often changed All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

ZERMA GSE 700 plastic granulator machine manufactured in 2018, is used in the processing of lightweight plastics such as PE, PP or PVC. The granulator has a specially shaped hopper with splash protection, inside of which there are fixed knives and a rotor with knives arranged in a ‘V’ shape. The rotor is driven by a slide-rail-mounted electric motor with tension-screw adjustable V-belts. The ZERMA GSE 700 plastic granulator machine can even cope with larger pieces of plastic, such as lumps and film rolls, thanks to the use of a deflecting wedge and block knives to prevent the rotor from blocking. All of the machine’s components are mounted on a base frame, fitted with mounting pads to dampen noise and vibration.

REF-2471 COMITROL 3000 PROCESSOR APPLICATIONS It is mainly used for milling products with high moisture content such as kernel sweet corn, cooked meats, and vegetables. It has a variety of cutting heads and impellers. The cutting heads provides the desired particle sized. OPERATING PRINCIPLE The product is guided to the impeller. Once it is introduced in the impeller, the product starts to spins in high speed inside the cutting head. Those remaining little pieces that protrude between the spaces in the dividers are cut in flakes. Brand: URSCHEL Model: Comitrol 3000 - Power: 30 CV - Total Dimensions: height 173 cm, width 77 cm, length 125 cm. Ø of the hopper: 21 cm.

Horizontal borer Wotan B105Y Spindle: 120 mm Travels: -X: 3000 mm -Y: 1450 mm -Z: 1280 mm Table: -1400 x 3000 mm -Rotating part: 1130 x 1500 mm (manually rotated to any degrees) -Max load: 7 tn Machine weight: about 25 ton

Stock - No. 2537 1 used,, functionally tested cutting mill/granulator Manufacturer: Alpine Hosokawa Type: RO 50 / 80 Built: 1993 Material feeding hopper: 500 x 840 mm Opening hydraulic Rotor diameter 500 mm x width 800 mm Rotor semi-open, 4 rotor V-cut - 2 Fixed blades Drive 55 kW Sieve diameter 10 mm Blower and Cyclone Throughput up to approx. 800 kg/h depending Material Machine is ready for demonstration from the Wuppertal plant, Date by appointment More granulators from stock ready to show, Ask for our current stock list or visit : plasticotrading

Granulator - Wanner D25.38 s Year of construction: 2011 Location: Lodz, Poland Slow-rotating granulator with gearbox, with cyclone and dust removal Power: 7.5 kW 2 stator blades, 18 rotor blades, the sieve - interchangeable Rotor and blade are cooled with water Hopper inlet: 430x380 mm Grinding chamber opening: 390x290 mm Automatic feeding of the regrind to the big bag It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is changed often All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

U5 Lab Package For Pilot & Development Construction: 305 stainless steel with 316L stainless steel product contact parts. Surface Finish: Product contact surfaces mirror polished (Ra 0.10 micron), non-contact surfaces 150 grit (Ra 1.06 micron); welds cleaned and polished and all material contact welds ground flush and polished. Infeed Opening: 3.25" (83 mm) diameter with grid bars to prevent operator access to the rotating impeller. Infeed Chute: Hand-fed funnel, 6.4" diameter x 5" high (163 mm x 127 mm) with magnetic actuated safety interlock. Spindle Assembly: Sanitary pharmaceutical duty with pre-lubricated, sealed bearings, viton O-ring, two shaft seals, and double varilip seal in a stainless casing. Also suitable for use with vacuum. Impeller Speed: Approximately 1000 - 6500 RPM. Capacities: Varies based on tooling, feed and speed used. Discharge: 6" (152mm) tri-clamp di ...

(FP 50-13) - vertical milling head accessories for the WH 10 CNC and WHN(Q) 13 CNC machines milling operations of vertical and in surfaces manually fastening on the machine, manually clamping of tools

Make: Fryma Line ML 250 / MZ 250 for soy milling, production of soy milk Perforated disc mill: 45 kW Colloid mill: 60 kW Capacity: approx. 7000 l/h (soy milk) Dimensions LWH: 1700 x 1500 x 1550 mm Weight: approx. 1100 kg

Radius milling cutters, end mills, end mills, milling cutters -Cutter: 8 cutting edges -Diameter: 47/65 mm -Socket: Ø 32 mm -Dimensions: Ø 65 x 130 mm -Weight: 1.9 kg

Used agitated ball mill Hosokawa Alpine PV 800 Pulvis Scope of supply: Pulvis grinding system including gas distributor, feeding screw, flap valve, classifier mill Pulvis PV 800 with TTD 315 classifier head, mill motor 37kW, classifier motor 45kW, filter, flap valve, blower and switch cabinet. Technical details: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation. Normal steel with wear protection - ceramic (mill only) A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant W ...

Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knife: 4 Rotor blade: 7 x 4

TECHNICAL DATA: Working length mm: 800 Total power installed KW: 1 Weight Kg: 120

Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)

Colloid mill (vibration colloid mill) Manufacturer: Probst & Class (PUC) Type: JV14 N°: 67017 with hopper Engine: Loher & Sons Power: 1.5 kW 2880 rpm normal-toothed grinding set very good condition On-off button Product outlet milk pipe union mobile on lockable wheels LWH: 840 x 350 x 350 mm

Colloid mill Manufacturer: Probst & Class (PUC) Type: N60/S Factory no.: 87079 Power: 2.2 kW 380 V with on-off button n=2825 rpm miti hopper, circulating line & three-way valve very good condition LWH: 700 x 300 x 740 mm

Bead mill Manufacturer: Fryma Type: MSZ-12 Factory no.: M12362 Pressure product space: 2.5 / 0.2 bar Pressure double jacket: 2.0 / 0.2 bar Power: 2.5 kW 380 V Machine in EEx protection Rotor speed controlled Feed pump speed-controlled with pressure & temperature gauge Grinding set as good as new Switchgear in EEx protection very good condition Weight: approx. 150 kg LWH: 700 x 600 x 750 mm

Rental system Hosokawa Alpine AS 100 Aeroplex, not for sale. The Hosokawa Alpine Aeroplex AS spiral jet mill is a simple jet mill without dynamic classifier (different to our Hosokawa Alpine AFG) that allows the ultrafine micronization with a final fineness of around 10 to 150µm of different products. Mainly dry non abrasive materials up to 3 Mohs hardness can be pulverized although some models allow wear protection inserts within the grinding chamber (pending availability). The micronizer design without rotating parts (thus no bearings or grease) makes this mill especially suitable for pharmaceutical and food applications, although it´s used as well on the chemicals industry for instance. The comminution takes place inside the grinding chamber where the product is accelerated by the compress gas injected through the grinding nozzles causing the different particles to collide with ...

Digital Table area 800 x 900 mm Cross-stroke table 1200 mm Drilling depth 700 mm Vertical stroke 900 mm Tool holder ISO 50

Used only for experiments.

It is used in rubber and plastics mixing, warming mixing, sheeting mixing, etc. III Equipment specification XK400×1000 mixing mill 1. Main technical specification NO. Item Main technology data and feature A Main technology data 1 Roll diameter 400mm 2 Roll working length 1000mm 3 Roll linear speed Front:14.85m/min Rear:18.85m/min 4 Speed ratio of rolls 1:1.27 5 Max roll space 10mm 6 Compound feeding capacity 25kg-35kg 7 Motor power 37KW,n=980r/min，IE3 8 Dimensions 4400X1710X1850mm 9 Gross weight 8500kg B Feature of main machine 1 Roll size(mm) Ф400×1000 material alloy chilled hard cast iron, surface hardness HS70±2,Surface roughness: Ra0.2 Bearing type Adopt the aligning roller bearing, copper pressure ring, bearing taper 1:12 type Front roll is drilled roll and rear roll is drilled roll, can pass cooling water, e ...

Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nit ...

Fully refurbished Hosokawa Alpine UPZ 100 used system by Alpine Originals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation (N2) Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system in large table fitted with pins (other grinding tools of choice could be offered for an additional price), small feeding hopper with a dosing screw, filter and barrel to collect the fines, blower and piping. Includes a relay control panel. This small size system with an universall mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mil ...

Grinder mill with open rotor blades, cutting chamber: 430x200 mm, motor: 5.5 kw. With electrical panel. We offer a highly efficient shredder mill with blades and open rotor, designed to optimize the reduction of plastic materials. Our machine features a 430x200mm cutting chamber and a 5.5 kW motor that ensures solid performance in plastics processing. In addition, we include an electrical panel that facilitates the control and safe operation of the machinery. At [Your Company], we are committed to providing state-of-the-art solutions for the thermoplastics management and recycling industry. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Used mill made by Comec, model MM-12. New 2014. Weight 650 kg, 12 L, 30 kW, 6 Bar, CE, Eex dIIB T4. Control panel.

Stawert Mill Model G12F1. The grain mill is without attachment/funnel. - Ser. N°: 288975 - elek. Voltage: 220V - elek. Power: 550W

Inlet opening: approx. 100 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: 350 mm Stator knife: 2 Rotor blade: 3 Drive: 30 kW Feed opening: approx. 100 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: 350 mm Stator knives: 2 Rotor knives: 3 Drive: 30 kW

ID2430 Waagner Biro Wet Ball Mill 260 x 550 cm year/Year of construction 1987 52 t Wet ball mill, overflow ball mill, drum diameter 2600 mm, grinding track length 5500 mm, ground material: limestone 0-10 (16 mm), wet grinding process, 2-stage cyclone circuit, nominal grinding capacity: 12-22 t/h, filling weight max./normal: 44/39 t, installed engine power: 450 KW, rubber Skega armor Wet ball mill, overflow ball mill, drum diameter 2600 mm, grinding track length 5500 mm, regrind: limestone 0-10 (16 mm), wet grinding process, 2-stage cyclone circuit, nominal grinding capacity: 12-22 t/h, filling weight max./normal: 44/39 t, installed engine power: 450 KW, armouring rubber skega

Inlet opening: approx. 100 x 1000 mmm Rotor width: approx. 1000 mm Rotor diameter: 350 mm Stator knife: 2 Rotor blade: 3 Drive: 30 kW Feed opening: approx. 100 x 1000 mm Rotor width: 1000 mm Rotor diameter: 350 mm Stator knives: 2 Rotor knives: 3 Drive: 30 kW

Inlet opening: approx. 300 x 600 mm Rotor width: approx. 600 mm Rotor diameter: approx. 300 mm Stator knife: 2 Rotor blade: 4 x 2 Drive: 30 kW Feed opening: approx. 300 x 600 mm Rotor width: approx. 600 mm Rotor diameter: approx. 300 mm Stator knives: 2 Rotor knives: 4 x 2 Drive: 30 kW

Used slow speed ball mill for the production of chocolate creams made by Techmasz model WMK350. New 2019. The offer consists of: - 2x WMK350 ball mill - 2x chocolate pump with water jacket + piping - 1x DUO fat melting tank The slow-running ball mill was manufactured mainly for the food industry. Its technical parameters allow it to meet the high requirements of this industry. Technical data: - Mixer drive: Nord SK2282 VF - 112 MH/4 geared motor controlled by NORD inverter type SK500E-401-340 - Coupling type: Maintenance-free flexible torsion coupling size 75 with 92 Sh A coupling. - Agitator speed control: In the range 20-80 rpm - Noise level: Less than 85 dB(A) - Ball diameter/type: 13 mm/91 kg (approx. 10000 pcs.) - Usable volume of mixing chamber: Min. 11.50 l., Max. 342.00 l. Full documentation.

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

ROLL DIAMETER 550 mm POLL WORKING LENGTH 1530 mm MOTOR POWER 110 KW DIMENSIONS: 630022301830 (L×W×H) SPEED RATIO OF ROLLS 1:1.27 Structure description 1 Base frame is welded and annealed . 2 The motor is 3- phase asynchronous motor, protection levels :IP54. 3 The driving type :Single out- shaft or double out- shaft. The speed reducer is hard gear reducer,which has long service life and low noise. 4 The roller bearing is rolling bearing with Low noise, save power almost 20%. the roller bearing use grease lubricating. 5 The nip adjusting Motor type 6 This machine is equipped with two pieces of moving blade. 7 Safety device : Pull the safety rod to achieve emergency stop. It can be installed with kick stop device and emergency stop device for safety. 8 The electrical design theory conform to the TWO ROLL MILL specifications strictly . It is equipped  ...

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Used sand miill Vollrath type VMSM 2/15 A. Two chambers 15 L volume each. Motor 24 kW, weight 1050 kg.

Used cryogenic mill model PCJ-500. Machine for grinding the product cooled with liquid nitrogen, made of 304 stainless steel, 16 mm thick, externally dimensioned: - length: 6844 mm - width: 2132 mm - height: 3588 mm. Focused on grinding the product based on liquid nitrogen, which allows achieving a temperature of -196 ° C. Liquid nitrogen does not come into contact with the product, it is the source of this low temperature. The cryogenic mill requires a nominal power consumption of 40.45 kW, at 380V, 50Hz.

Drives: 45 KW + 15 KW Weight: 2100 kg Dimensions: L 3.50 m x W 1.36 m x H 1.52 m;

Inlet opening: approx. 400 x 600 mm Rotor width: approx. 600 mm Rotor diameter: approx. 500 mm Stator knife: 3 Rotor blade: 5 x 2 Drive: 55 kW

oven 550 industrial 2x2x6m temperature range 100 - 550C Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel  ...

Technical Features of this Boring Machine Manufacturer JOHNFORD Model BMC-110 Year 2012 CNC FAGOR 8055-MC Table Table Surface 1.400 x 1.600 mm. Table max load capacity 12.000 kg. Table Rotation (B Axis) Continuous (0.001º) Travels and feeds X axis – longitudinal travel 2.000 mm. W axis – Quill travel 550 mm. Y axis – vertical travel 1.800 mm. Z axis – cross travel 1.600 mm. Spindle nose to table center 550-2.150 mm. Spindle center to table top 0-1.800 mm. Controlled Axis X, Y, Z, W, B X/Y/Z rapid feed 12.000 mm/min W rapid feed 6.000 mm/min Cutting feed axis X/Y/Z/W 1-6.000 mm/min Table revolution – B axis 4 rpm Boring spindle Boring spindle diameter 110 mm. Speed Ranges 2 Turning Speeds 0-3.000 rpm Spindle power 22/25 kW Automatic tool changer Tool selection Bidirectiona Random shortest path Tool magazine capacity 60 Max tool diameter 125 mm.  ...

Corundum stone mill Manufacturer: Fryma Type: MK-270 R Built: 1981 N°: F815198/9 Pressure working space: 1 bar Pressure double jacket: 10 bar with control cabinet with temp gauge with outlet chute various spare parts LWH: 1100 x 850 x 1700 mm