milling plant used for sale

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use

We offer a Milling Machine Routing Star V that is an ideal choice for automotive component machining and other high-precision tasks. We have four machines available from different years ( 2012, 2014, 2017) Technical Data: Dimensions (L x W x H): 5600mm x 2990mm x 2950mm Weight: 8000 kg Power Rating: 12 kW Connection Power: 3 x 400 V, 50 Hz Hydraulic Working Pressure: Max (bar not specified) Pneumatic Working Pressure: Not specified Table Size: 1400mm x 700mm Table Type: Rotating Table Number of Robots: 2 Tool Changer: Yes Find more here - / Contact us at -

Exchange units for contour milling HOMAG

quill dia 110 mm quill stroke 100 mm ISO 40 (DIN 2079) 360° swiveling of the spindle head previously used on Hermle UWF 1000

Key data: 500 mm, 200 mm

Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Manufacturer: RASOMA Type of Machine : End Milling Machine Year of Manufacture: 2018 Total Weight: 16,000 kg Voltage: 3x400V, 50Hz Control Voltage: 24V DC, 230V AC Rated Current: 92 A Maximum Fuse: 125 A Power Rating: 62 kW Find more here - / Contact us at -

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

We have for sale milling and borig heads for Skoda HBM IV25, IR100, IFW1, IFW2, IFW3, IFH, IOT steady rest for W200 price from 1000-5000eur

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

Double head lathe for milling and turning tubes Automatic (un)loading of workpieces nbsp;

- Z Axis 1100 mm - X Axis 1310 mm - C Axsi Endles - Working range stage 1: 4000 - 8500 mm - Working range stage 2: 4000 - 11.500 mm

Freesrobot Staubli RX170HM Deze robot is voorzien van gaten om te frezen in mallen van banden, maar ook in andere zaken is dit mogelijk. Koeling door de spindel en de koelmelk is luchtgekoeld. Smering Gebeurde met vet. spindelopname: HSK E 32 Werd gebruikt in Tire Mold fabriek Mecamold Herstal. Max weight on the table: 300 kg Admission in spindle (ISO): HSK E 32 Power on the spindle: 8 kW Drilling-capacity: 80 mm Tapping-capacity: 80 mm Control : Fanuc Number of axes: 6 Toolchanger: nee Number of toolholders: nee Number of rotations: 500 - 20 000 rpm Power principal motor : 5 kW

General SKU364X867 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor18.5 KW Inlet diameter150 mm Width165 mm Specified Features - Hammer Mill Hammer millcheck Grinding room sizeø 300 mm Moving hammers24 Hammer width12 pieces 40 mm and 12 pieces 60 mm With sieve cagecheck Housing dimensions ø 300 mm Inletø 150 mm Motor18,5 kW (400 V, 2955 rpm) Speed6900 rpm Hammer Mills MaterialStainless steel Information TypeMP2-W No.P1 187094 /4050 Year of construction2013 Mounted on framecheck Floor space2,50 x 0,95 m Total height0,80 m Weight550 kg Extra SpecificationsWith: dust filter AZO blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpm Hammer MillsNew arrivalsHosokawa AlpineMills > Hammer MillsNew arrivalsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At ...

General SKU364X863 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor37 KW Inlet diameter150 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4541 (321) Fine Impact Mills Grindercheck With sieve cagecheck Housing dimensions ø 1000 mm With hoppercheck (for a milled product) Inletø 150 mm Motor37 kW (400 V, 2960 rpm) With variable speed drivecheck Speed820—4100 rpm Information Type500 UPZ No.P1 187094 Year of construction2011 Mounted on framecheck With switchcheck (as is) With control cabinetcheck (as is) Floor space1,35 x 0,95 m Total height1,0 m Weight960 kg Extra SpecificationsWith: dust filter blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpm For the UPZ 500 we have the following additional items on stock AZO Coolable screw conveyor — SKU: 364X866 DMN Machinefabriek ...

COMPLETE LOT SPECIFICATIONS - 2x Fanuc R2000iB 165F industrial robots with RJ3iC controllers - 2x Gudel 8 metre linear tracks with bellows fully integrated - 2x HSD 8kW automatic tool change spindles, Year 2022.Inverters, cables, and full integration included Find more here - / Contact us at -

with technical advice, Affordable housing Low-cost housing, cmodul austria low cost housing • Pallet circulation systems for filigree and double wall elements NEW & USED • Machines and systems for prefabricated parts - battery formwork, tilting tables and special moulds • Stationary concrete block paving stone and edge stone installations + shapes as NEW • Mobile concrete stone machines + moulds as NEW • Concrete pipe and shaft ring machines and parts thereof • KS - Lime sandstone works • Dry mortar plants and parts thereof • Brickworks and parts thereof our used lines meets after reinstallation by us the Definition RETROFIT

Qty. 1 Second-hand steel strip production plant Mfc.: NKK, SMS, Bricmont, Siemens, Woo Jin Inc., Kum Soo Ind., Yong Woon Heavy Ind., Affival, Chun Yang, Sumitomo Heavy Ind., Primetals, Toshiba, Sungmyung Eng., Kiheung, Hyundai Steel, Dosan, Kobe, Yaskaawa, IMS, ABB Built: 1995 – 2018 Production plant weight: approx. 50,000 T Slab dimensions: 55 mm x 900~1,560 mm x 20,000~43,000 mm - T x W x L Strip dimensions: 1.4~16 mm x 900~1,560 mm – Coil weight: 28 ton Scope of supply: EAF A EAF B Ladle Furnace Continuous Caster Soaking Pit Descaler Hot Rolling Mill Cooling Unit Coiler Skin Pass Mill Equalizer EAF A Built: 1995 – 2005 Stopped in 2011 EAF B Built: 1995 – 2005 Stopped in 2020 Caster & Rolling Mill Built: 1995 -2005 Stopped in 2020 Capacity (slab) 1.8 MT /annum (A & B combined) Slab dimensions: 55 x 900-1,560 x 20,000-43,000 mm T x W x L  ...

ECOLAB filler outdoor cleaning system, but can also be used as a satellite station. As good as new, ready for immediate use

Grease Environmentally friendly, quickly biodegradable lubricating greases based on calcium soap and rapeseed oil. Manufacturer: Fuchs Item No.: 600654726 Plantogel 2 N 180 kg NEW - orig. packaging

COMPLETE TETRA PAK UHT PLANT WITH TWO ASEPTIC FILLING LINES FOR SALE Item #: Usm-211 Category Tetra Pak TBA 19 1 Tetra Therm Aseptic Drink/ Als Tetra Pak South East (Pvt) ltd Liter 20,000 2 Tetra Alex Homogeniser Tetra Pak South East (Pvt) ltd LPH 10,000 3 Jumbo Reel Truck 080 Tetra Pak South East (Pvt) ltd 4 Juice Processing Equipments Tetra Pak South East (Pvt) ltd LPH 8,000 5 Tetra Pak TBA/8 1000S Filling Tetra Pak South East (Pvt) ltd LPH 6,500 6 Cap Applicator - 30 Flex Tetra Pak South East (Pvt) ltd PPH 9,000 7 Conveyor Control Lubri/Systems Tetra Pak South East (Pvt) ltd 8 Tetra Straw Applicator 21 Tetra Pak South East (Pvt) ltd PPH 9,000 9 Conveyors Tetra Pak South East (Pvt) ltd 10 SS Pipes and Fittings Tetra Pak South East (Pvt) ltd 11 Tetra Pak TBA/19 Filling Machine Tetra Pak South East (Pvt) ltd LPH 1,500 12 Tetra Pak Strainer  ...

Plant for fire aluminizing steel wire The total length of the plant is about 56 meters A 01 Wire uncoiler Uncoiling device Uncoiling device A 02 Wire cleaning Electrochemical wire cleaning equipment Ultrasonic wire cleaning device A 03 Wire heating Inductive wire heating Control cabinet Inductive wire heating A 04 Melt preparation - preheating Pre-melting furnace Melting - low pressure furnace A 05 Wire coating Coating device view Coating device A 06 Wire cooling Cooling channel Wire . Quenching tank A 07 Wire - rewinding device Wire rewinding view Wire winder view 2 Total power in KW and total 631 KW 1 Current in A: 593 A Technical performance parameters: Steel wire: C < 1,0 %. Diameter 1,00mm . - 2,00mm Strengths < 1400 N/mm² Coating speed design: Wire diameter: 1,00mm -1,50 mm Maximum coating speed: 120 m/min Wire diameter: > 1,50mm - 2,00mm Maximum c ...

60T bis 80T per hour capable Find more here - /

Power plant (Lambion-Howden-Scheuch-Hamworthy) History - Commissioning: 2009 - Power plant built for the heat supply Manufacturer: Lambion Siemens (turbine, measurement and control technology) Imtech (electrics and performance data: 950 kW rated electrical power 2.00 MW rated thermal output HT(128 128°C) 1.50 MW thermal output NT (85 85°C) 6.74 MW thermal firing capacity Steam output: 7.5 t/h approx. 11,000 tonnes of fuel required per year LPM and WHS Boiler Manufacturer Lambion Year of construction 2008 Maximum steam production [t/h] 7.5 Max. permissible pressure [bar] 32 Max. permissible vapour temperature [ [°C] 440 Turbine / Generator manufacturer Howden Machine TWIN CA 34 Year of construction: 2008 Generator manufacturer: AvK Generator Generator type: DSG 74 M2 System data: Flue gas cleaning Manufacturer Scheuch Condenser / recooling manufa ...

Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block or completely overhauled. The components relevant to assemblies for "modernization" were marked: - complete panelling - Interfaceschronk - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger" - Pressure expansion foll3 (if present) - Pressure transducer and temperature sensors - Rubber rails for motor and generator - Clutch element - Air filter inserts - Safety valves and arnot inserts - Sylomer strips - Hot water preheating pump and heating el ...

For Sale: Complete 10 MW / 2 MW Cogeneration Power Plant Available for immediate acquisition: a fully integrated power plant for the combined and efficient production of heat and electricity through a cogeneration system. Technical Description: The whole installation (Model: E.V.A.) for sale includes components listed below: STEAM BOILER Manufacturer: Wehrle Werk Year: 1999, Heating capacity: up to 10 MW Fuel type: biomass/RDF Fuel gas volume: 20.000 Nm³/h Fuel consumption: approx. 2500 kg/h Fuel need: approx. 20 000 t/a Average combustion temperature: approx. 900°C Main steam pressure: water steam with 40 bar Main steam temperature: 410°C Main steam mass flow: 11 t/h Combustion power gross: max. 10.000 kW Combustion power gross: min. 7000 kW Water content: 25 m³ STEAM TURBINE Manufacturer: KKK / Siemens SST110 Electrical capacity: up to 2 MW Year: 1999, serial  ...

Concrete Mixing Plant 1: Manufacturer: ELBA- Model: Supermobil ESM 60 Year of Manufacture: 1998 Status: Decommissioned Technical Specifications: - Rated Output: Approx. 30 m³/h - Dosing Unit: - Loaded by wheel loader - Total capacity: 180 m³ - Four chambers: 4 × 45 m³ (25t each) - Binder Storage: - 3 vertical silos - Each silo approx. 66 m³ (80t) at a density of 1.2 t/m³ - Dosing System: - Aggregates: via weighbelt, 2500 kg - Binder: via container scale, 500 kg - Water: via container scale, 500 kg - Additives: - Two-chamber liquid additive scale, 2 × 12.5 liters, 25 kg total - Mixing Equipment: - 1 EMS 1000C single-shaft compulsory mixer - Concrete discharge: 1,000 liters - Discharge Height: - For truck mixer and truck loading: 4.00 m - Control System: - Fully automatic with computer - Operator container included - Electrical supply: 400 V, 50 Hz, 3-phase, 104 A fuse Concre ...

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation of business, master and execution plans • Sale of various machines and equipment for the production of building materials and prefabricated parts • Commissioning of the plants and personnel train ...

Straightening and cutting machine rolling from Coil. used test line please ask us for your special offer.

full line for mesh up to 6 m

Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...

C-Module AUSTRIA ERICH PETER MASCHINEN-PLANTS GMBH A - 7083 Purbach - Austria office@machines-plants.at www.machines-plants.at Affordable housing, affordable houses, Hotels - Residential complexes - Residential complexes - Detached houses - cheap houses we have sold our used ones, we also offer NEW C-Module 3000 mm x 6000 mm NEW FORMEN Cheap houses - cheap apartments I am proud to introduce you to our improved system for building affordable homes. Especially for villages and small towns. But hotels have already been built in this way - we can do all the planning for them. A useful system also for stairwells, corridors and elevator shafts - easy to manufacture. It is a modular system, but still flexible in the size of the room and in the positioning of the windows and doors. Connecting to other materials such as wood, glass and concrete slab is easy. Th ...

Precast Modular House Machine, Low Cost Precast Concrete House ERICH PETER MACHINES-PLANTS GMBH deals with complete solutions for the implementation of construction projects according to EU standards. We are not a construction company, but give the required knowledge in theory and practice to plan, calculate and implement construction projects. Business offers: ? Creation of necessary business, master and execution plans ? Sales of needed machines and plants for building material production ? Precast plant supply (new or refurbished) ? Plant commissioning and personnel training ? Concept & design for precast concrete projects as well as for multi-story wood structure buildings 5 key arguments: ? High speed buildings with short realisation time very important in all markets. ? High quality mainly in precast realised (minimized human failure) ? Low c ...

STRIP WIDTH: 750 MM, ENTRY THICKNESS: 0.5 MM, EXIT: 2 x 0.007 MM,

Four nearly new moulds for garden wall and fence.

From small through medium to big concrete batching plants, Prometal presents the most efficient ways of production of concrete with great results of high-quality concrete. Our customers can choose between 15 cubic meters per hour to 120 cubic meters per hour concrete batching plants. Long-lasting structures and stable design provides our customers with long term profitable investment with no regrets. The aggregate bunker is designed and manufactured to operate under heavy working conditions for a long time. There are 2 electro-pneumatically controlled discharge gates, which provide easiness and choice in the discharge together with suitable elevation. Aggregates are weighed by 4 units of load cells. Electric installation of concrete batching plant includes all electrical connections of voltage, controlling and part for measuring of the plant. All installations and sa ...

NANO FILTRATION PLANTS CAPACITY: FROM 5.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION AND PRE CONCENTRATION TO 20 % SOLID RATIO FULLY AUTOMATION CONTROLLED WITH PLC CONTROL PANEL AND TOUCHSCREEN

REX - TORWEGGE - HOMAG- BARGSTED - KALFASS - HOMS-410-K core layer production plant (also solid wood boards) Consisting of feeding roller, Package cross-cut saw HOLTEC's 121-SHKA,. more feed roller TRANSA, Rotary scissors type lift roller Solid wood loading portal, Loading system KALFA for planing machine REX, REX planing machine HOMS-410-K built in 2004. with RIP saw unit. Central RIP saw unit, upper and lower drum, Much sheet saw unit, Belt conveyor system 8 manual workstations circular saws, 12 x material import System. 12 x glue system. Glue press TORWEGGE Working length approx. 6600 mm,. 2 cross cutting, 8-speed The stack and cooling system, Stacking line, Conveyor roller conveyor Power 2500 sqm / 7 hours PLATTENAUSBESSERUNGS AND ROLL FORMING LINE BARGSTEDT/HOMAG Plattenausbesserungs line Doppelendprofilier line in TOP condition! Workpiece parameters of ...

ULTRAFILTRATION PLANT CAPACITY: FROM 5.000 LITER TO 30.000 LITER PER HOUR USED FOR PROTEIN CONCENTRATION APPLICATIONS: UF CHEESE, FETA CHEESE, MILK PROTEIN CONCENTRATE, WHEY PROTEIN CONCENTRATE FULLY AUTOMATION CONTROLLED WITH PLC CONTROL PANEL AND TOUCHSCREEN

NANO FILTRATION & REVERSE OSMOSIS PLANT USED FOR WHEY CONCENTRATION FEED CAPACITY: 20.000 LITER PER HOUR OUTLET: 22 % SOLID RATIO ALFA LAVAL AND FRISTAM PUMPS VERY GOOD MECHANICAL CONDITION YOM: 2002

ULTRAFILTRATION PLANT CAPACITY: FROM 1.000 LITER TO 50.000 LITER PER HOUR PROTEIN CONCENTRATION APPLICATIONS: UF CHEESE, FETA CHEESE, LABNE CHEESE, FRESH CHEESE, CREAM CHEESE, MILK PROTEIN CONCENTRATE, WHEY PROTEIN CONCENTRATE ...ETC PRODUCTIONS FULLY AUTOMATION CONTROLLED WITH HMI

NANO FILTRATION PLANTS CAPACITY: FROM 1.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION AND CONCENTRATION, PERMEATE CONCENTRATION, FERMENTATION BROTH CONCENTRATION AND MANY APPLICATIONS FULLY AUTOMATION CONTROLLED WITH HMI TOUCH SCREEN OPEREATOR PANEL

A complete power plant consisting of 3 JEBANCHER units is now available. Below are the details: 2x Engines Model J616C - Power: 2519 kVA (2.519 MW each) - Overhauled (E60) in 2011 - Operating hours since overhaul: 20,503 hours - Manufacture date: 1997 - Serial numbers: 1200959 / 1200956 1x Engine Model J320 GS S04 - Power: 1366 kVA (1.366 MW) - Overhauled (E60) in 2011 - Operating hours since overhaul: 19,059 hours - Manufacture date: 1997 - Serial number: 1200954 Total power capacity: 2 x 2.519 MW + 1.366 MW = 6.404 MW Scope of supply includes: - XT3 Diane control panel - GEC ALSTHOM transformers: 3 units (2x 2500 kVA, 1x 1600 kVA) - Gas line - Heat exchanger - Smoke exchanger - Pumps - Table cooler (radiators) - Oil tank Location: Paris, France For more information, please feel free to contact us.

ID3500 Crushing plant for the production of frost protection Crushing plant for the production of frost protection Crushing plant for the production of frost protection consisting of: 1) Humboldt - double knee crusher Type: BDG 900 x 700 Jaw width 900 x 700 2) Pfister vehicle scale type TAW 30 Maximum load: 30 tons Bridge size: 8 x 2.5 m Standard printing unit as a recording device 3) Steel sheet silo for individual installation 4 supports made of IP beams Total height 8 m, clearance height 3 m Outlet 600 mm, silo closure as a flat slide with rack adjustment and handwheel operation. An electric vibrator was subsequently attached to the outlet. 4) SBM impact grinding mill type PMM 10/6/4 export 5) Push-cart feeder type SW 1000 x 4000 with inlet hopper for the crusher 6) Existing conveyor belts 7) Screening system Parts lists and purchase invoices are available for mo ...

Milk Pasteurisation Set With Seital Separator 2000-3000[tel:2000-3000] L/h Description This Combined GEA VT 10 pasteuriser with Seital Cream Separator was used on Cheese and Fresh milk products. This is ideal for a small/medium sized dairy wanting to move away from manual cleaning separators and Bach Pasteurization process gaining time, efficiency and product quality . Having a cream separator opens new markets for the dairy such as butter, cream, clotted cream, skimmed milk and zero fat milk products are some of the opportunities. Pasteuriser Make : GEA Model : VT 10 Year of Manufacture : 2005 S/N : 169/15597[tel:169/15597] Temperatures: Shown in Chart Hot Water inlet PHE Balance Tank Temperature Valve regulation Diver Valve for non pasteurised product Chart Recorder Product pumps Water Pump Stainless steel skid mounted for quick installation Con ...

We can offer 2 complete BCF spimming lines, eachline has 6 positions, manufactured by Plantex, Italy in 1996, can produce PP, PA yarn, 1~3 color, 1000~4000d, working condition. Seriou buyers contact us.

GEA Complete UHT Plant For Sale Item #: Usm-154 Category UHT Plants GEA UHT Plant For Sale

GM 1207 thermal oil plant consisting of: 4 wagon ovens 1 central heating system with gas burner Total baking area: 48 sqm Manufacturer: MIwe Year of construction: 2002 Condition: very good dismantled in stock Pratteln Specifications: 4 trolley ovens for 2 baking trolleys each with 10 supports Baking area per oven: 12 sqm Central heating system: Gas, 350 Kw 18 baking trolleys with 10 pads for: Baking trays: 600 mm x 1000 mm Footprint per furnace: W 1600 mm x D 3100 mm x H > 3000 mm Side by side: W 8000 mm x D 3100 mm x H 3000 mm

Make : Armfield Capacity : 40 litres Mixing : Silverson Mixer Processing vessel with cooling Usage : Pasteuriser and mixing vesle Model: FT 40 Make : Armfield Model : FT 75 Usage : Crystaliser Pin mixer Single tube Usage : Margarine and ice cream Make : Armfield Model : UHT Usage : UHT Pasteuriser All in excellent condition came out of university in UK