milling machine used for sale

Manufacturer: OPS-Ingersol Model: EAGLE-V5 Precision-Line Year of Manufacture: 2025 Type of Machine : Milling Machine with Multi Change Automation Condition: Used.Ready for operation, connected to power Travel Distances - X axis: 550 mm - Y axis: 400 mm - Z axis: 400 mm Rotary Table - Swivel/rotary table with torque drives Spindle - Spindle type: HF spindle HSK-E40 with DDF by Fischer - Spindle speed: 1 to 42,000 rpm - Spindle power: 15 kW - Torque S6 (60%): 6.7 Nm Tool Magazine and Control - Tool magazine capacity: 100 positions - Control: Heidenhain - Weight: 8,500 kg Extra Accessories can be negotiated into the offer. - 20x Erowa ITS 148 Palette Type G with clamping studs for automation - 13x HSK E40 shrink fit chuck d3 by Haimer - 28x HSK E40 shrink fit chuck d4 by Haimer - 14x HSK E40 shrink fit chuck d5 by Haimer Find more here - .ucymachines/ Contact us at - sales@ ...

Year of Make: 2015 Machine type: BC 1001 HS Total production hours: 1608h Total standby time: 5070h

x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm table-size: 850 x 440 mm spindle taper: SK 40 control: HEIDENHAIN TNC 355 ATC: 32 Pos spindle turning speed range: 20 - 4000 U/min spindle drive: 5,9 kW quill stroke: 80 mm feeds longditudinal/cross/vertical: 1 - 2000 mm/min power feed x/y/z: 7200 N rapid traverse longitudinal and cross: 10 m/min rapid traverse vertical: 10 m/min total power requirement: 12 kW weight of the machine ca.: 3 t Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm spindle turning speed range: 80-2200 U/min table-size: 600 x 200 mm dimensions of the machine ca.: 1400 x 1150 x 1600 mmxmmxmm weight of the machine ca.: 0.6 t misc. accessories: Digital read-out 3 axes www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mm y-travel: 320 mm z-travel: 400 mm table-size: 950 x 450 mm table load: 300 - 350 kg tool adaptor: ISO 40 turning speeds: 25 – 2000 / 2240 U/min quill stroke: 95-100 mm vertical head swivelling: 90 Grad rapid traverse: 1400 mm/min total power requirement: 2,8 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 1,8 x 1,6 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300-320 mm y-travel: 240-270 mm z-travel: 300-310 mm table-size: 670 x 320 mm tool adaptor: ISO 40 turning speeds: 45-2240 U/min quill stroke: 60 mm head swivability: 360 ° feed: 12,5 - 630 mm/U rapid traverse: 1200 mm/min weight of the machine ca.: 1 t dimensions of the machine ca.: 1,265 x 1,08 x 1,62 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300-320 mm y-travel: 240-270 mm z-travel: 300-310 mm table-size: 670 x 320 mm tool adaptor: ISO 40 turning speeds: 45-2240 U/min quill stroke: 60 mm head swivability: 360 ° feed: 12,5 - 630 mm/U total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 400 mm, 400 mm

MAHO MH 600 E CNC milling machine – used, functional (only for commercial use) For sale is a MAHO MH 600 E CNC milling machine from 1989 in used condition. The machine shows signs of wear and tear according to its age, but is basically in functional condition and is currently under power, so that an inspection and demonstration during operation is possible at any time by arrangement. Technical data: Travels: X 600 mm / Y 450 mm / Z 450 mm Spindle speed: max. 4,000 rpm Tool holder: SK40 Condition / Notes: Machine running and ready for use All axes can be moved Control system functional Z-axis clearly audible during the process (according to the fitter's statement, not unusual for this type) Slipper clutch of the Z-axis is oily and should be replaced when the opportunity arises Note: Sale only to tradespeople Under exclusion of any warranty and guarantee N ...

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table-size: 800 x 400 mm spindle taper ISO: Sk 40 spindle turning speed range: 10 - 3150 U/min quill stroke: mm total power requirement: 12,0 kVA weight of the machine ca.: 2,2 t dimensions: 2,0 x 1,85 x 1,95 m CNC Universal Milling Machine - Heidenhain TNC 310 with handwheel - Hydraulic tool clamp - Central lubrication - Coolant system - Machine light - Machine feet - Enclosure The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

380 V 16 A Speeds 100 - 1250 rpm Length 1 m Width 0.8 m Height 1.40 m Table converted to pneumatic control.

380 V 16 A 63- 800 rpm Length 1 m Width 0.8 m Height 1.40 m Color: Green Machine is overhauled.

Speed 32 - 1500 rpm Digital display 3 axes Mitutoyo Length 2.60 m Width 2 m Height 2.05 m Weight 3.5 t Color: Green Milling cutters Milling cutter mounts

This 5-axis SHW UFZ 6L Bed Type Milling Machine was manufactured in 2008. It features an impressive X-axis travel of 6000 mm, Y-axis travel of 2100 mm, and Z-axis travel of 1600 mm. The machine includes an automatic tool changer with a capacity for 150 tools and a robust clamping plate surface of 3600 x 3750 mm. If you are looking to get high-quality milling capabilities, consider the SHW UFZ 6L machine we have for sale. Contact us for further details.

Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with adjustable speed -Depth adjustment: 0 - 7 mm -Drive: 0.75 kW -Adjustable speed: 0 - 6000 rpm -Angle: 45° -Accessories: Widia milling head -Dimensions: 650/560/H1190 mm -Weight: 94 kg

serial number: 10970000633 control: 3D Bahnsteuerung MILLPLUS letzte Ausbaust Control: 67 10.221.661 x-travel: 600 mm y-travel: 700 mm z-travel: 550 mm spindle: SK40 - neu - 380 Std. : spindle speed:: 12.000 U/min automatic swivel milling head: tool change unit: 30 Plätze : Infrarot-Taster : : : : 600 L : : : : 40 bar : mode of operation: 3 + 4 : : MillPlus IT flushing gun: mit Pumpe : Durchmesser 630 mm T-slots: 9 T-Nuten 14 H7 / 63 mm capacity: 700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 7200 mm, 4100 mm, 1250 mm

Control Heidenhain ... TNC7 Clamping table surface ... 6000x2900mm Axis X ... 7200mm Stand passage ... 3200mm Axis Y ... 4100mm Axis Z ... 1250mm Axis W ... 1600 mm Spindle speed... 0-3000 rpm. Max. table load ... 20 000kg The machine has undergone a complete overhaul. More info on request, new Fermat headstock new UHAmi 30 milling head CE new electrics and hydraulics new HH TNC 7 controller new digital display HH New linear guide new ball screws cooling New tool changer device

Key data: 4000 mm, 2700 mm, 1250 mm

Control Heidenhain ... TNC 640 Clamping pond area ... 4000x2000mm Axis X ... 4000mm Stand passage ... 2500mm Passage between the table and the crossbeam... 1890mm Axis Y ... 2700mm Axis Z ... 1250mm Spindle speed... 0-5500 rpm. Max. table load... 15 000kg The machine is after the general overhaul. More info on request. new Fermat headstock new electrics and hydraulics new digital display HH New linear guide new ball screws cooling CE Options: Tool changer setup Swivel Heads

Key data: 4200 mm, 2300 mm, 1250 mm

Control Siemens ... Sinumerik 840 D Clamping table surface ... 1600x4000mm Axis X ... 4200mm Stand passage... 2100mm Max. table load ... 10 000kg Axis Y ... 2300mm Axis Z ... 1250mm Spindle mount... ISO 50 Spindle speed ... 40-6000 rpm Max. spindle torque ... 1050/1435Nm Rapid traverse ... 10m/min Main engine power ... 30/41kW Total power requirement ... 79kVA Machine weight ... 51000kg L x W x H ... 10480 x 5200 x 6120mm Incl. milling heads - C50 and N75 The machine is in good condition, possible to test under power.

x-travel: 200 mm y-travel: 200 mm z-travel: 400 mm Control: Siemens 840 D total power requirement: 84 kW weight of the machine ca.: 19 t dimensions of the machine ca.: 7,9 x 6 x 2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling cutter diameter 250 mm Milling width: 305 mm Milling depth: 160 mm Pneumatic workpiece clamps Manual feed Weight: approx. 200 kg

PFAUTER PE 150 Hobbing machine GENERAL Project No.: 906008 Quantity: 1 pcs. Manufacturer: PFAUTER Type: PE 150 Control: Siemens 840 D powerline Year of manufacture: 1991/2009 Condition: Used machine Engine Approx (hrs): 33500 DESCRIPTION GEAR CUTTING Max. head circle diameter 150 mm Carriage stroke Z'-axis 200 mm Travel in X 150 mm Module 1-3 mm Bevel angle +30 to/to -45 degrees Max. tooth width 150 mm Max. diameter hob 130 mm Max. length of hob 220 mm Tailstock OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Electrostatic oil/emulsion mist extraction system Chip conveyor Engine is/was operated with oil Coolant Setup Circumferential Parts Storage Belt GENERAL TECHNICAL DATA Mains fuse 100 A Total power requirement 49 kVA Machine dimensions (LxWxH) approx. 5820x4047x2810 m ...

DOOSAN VCF 850 LSR II is a multi-purpose, vertical machining centers suitable for a wide range of applications. 1993 working hours (like new)

A bed milling machine is offered. Spindle drive: 25kW, table clamping surface X/Y: 1250mm/500mm, travel paths X/Y/Z: 1000mm/500mm/600mm, tool holder: ISO 40, feed rate: 0mm - 3000mm/min. Equipped with CNC control, coolant system, electronic handwheel, machine weight: approx. 4200kg, machine dimensions X/Y/Z: approx. 2800mm/2400mm/2500mm. Inspection possible by arrangement.

This 5-axis WALDRICH COBURG 17-10 FP NC/5 was manufactured in 1985 and lastly retrofitted in 2011. It features a maximum workpiece weight of 60 tons and a substantial table size of 2,500 mm by 5,000 mm. The machine is equipped with a Sinumerik 840 control system, ensuring precision in operations. If you are looking to get high-quality milling capabilities, consider the WALDRICH COBURG 17-10 FP NC/5 gantry milling machine we have for sale. Contact us for further details.

Dear Ladies and Gentlemen, at the Bruchsal location we offer a used machine for sale without obligation: Worm Gear Milling Machine Gear Shaping Machine Manufacturer: Gleason Pfauter Type: GP200 Year of Make: 2002 Weight: approx. 9.7 t If you are interested, please leave us an offer until 15.06.2026, taking into account the following points: If you have any questions or would like to arrange a viewing appointment (from 01.06.2026), please do not hesitate to contact us.

Inv. Num. : 9154 Type: 17-10 FP NC/5 Producer: Waldrich Coburg Created: 1985, GO 2011 Parameters: Operating system: Sinumerik 840 Table length: 5000 mm Table width: 2500 mm Max. workpiece weight: 60000 kg Weight: 125000 kg Coolant leaks out in the spindle area of the machine. GOs were carried out on the machine in 1997/2008/2011.

Offered is a universal knee-type milling machine. Working area X/Y/Z: approx. 710mm/250mm/430mm, table clamping surface: 1250mm/315mm, spindle mount: ISO 40, speed range: 45-2000rpm (18 steps), feed rate: 10-1000mm/min, rapid traverse: available, control: conventional with electrical program control (PFAFF panel). Equipped with horizontal milling spindle, manual support bracket for long milling arbors, hydraulic pressure accumulator system, coolant device, chip collection tray, central lubrication. Weight: approx. 2100kg, overall dimensions X/Y/Z: approx. 1950mm/1750mm/1850mm. Inspection possible by arrangement.

Offered is a universal tool milling machine. Working area X/Y/Z: approx. 330mm/145mm/370mm, table clamping surface: 630mm × 180mm, spindle speeds: 63-3150rpm (across 8 steps), spindle mount: SK 30, connected load: 380V/16A, control: manual. Equipped with swiveling vertical head, manual axis feed via handwheels, T-slot table, integrated chip support tray. Overall dimensions X/Y/Z: approx. 1100mm/1200mm/1650mm. Inspection possible by arrangement.

A tool milling machine is offered. Travel range X/Y: approx. 400mm/200mm, spindle speed: 224-2240rpm (6 steps), feeds: 0.10-0.71mm/rev, tool holder: MT/SK, control: manual. Equipped with vertical milling head, adjustable compound table, mechanical handwheels. Inspection possible by arrangement.

module: 10 diameter: 180 mm Bore diameter: 40 mm width: 75 mm : 2 weight: 14 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

module: 4 diameter: 180 mm Bore diameter: 40 mm width: 67 mm : 5 weight: 15 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 6500 mm y-travel: 1500 mm z-travel: 2000 mm control: HEIDENHAIN iTNC 530 HSCI total power requirement: kW weight of the machine ca.: 58 t dimensions of the machine ca.: 14,5x7 m The ANAYAK HVM-65 traveling column milling machine stands for high rigidity, precision and machining performance. Equipped with a Heidenhain iTNC530 HSCI control, this CNC milling machine is ideally suited for demanding heavy-duty machining applications. The proven traveling column design with a fixed distance between column and spindle axis ensures consistent accuracy across the entire working range. The cross movement is performed by the column, eliminating the need for a contoured foundation. The orthogonal milling head with 28/42 kW power output reaches speeds of up to 6,000 rpm and features a precise 0.02° x 0.02° indexing resolution. The rigid auxiliary table offers a large clamping surface of 7 ...

This 3-axis PORTIC VTEC gantry milling machine was manufactured in 2016. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 800 mm. The machine includes a robust table size of 2,000 x 1,300 mm and a maximum workpiece weight capacity of 8,000 kg. If you are looking to get high-quality milling capabilities, consider the PORTIC VTEC gantry milling machine we have for sale. Contact us for further details.

2019 Hurco VMX 42i Vertical Milling Machine. Less than 100 hours on machine. Machine has been stored in heated building. Boasting a 24-inch Z-axis travel bed and a 42-inch X-axis travel bed, 24-inc Z verticle travel. Equipped with 12,000 RPM, CAT 40 spindle taper and a powerful 24 hp spindle horsepower. 30 station automatic tool changer. Wired for 220 V power source. Magnet shown in video not included in sale of machine. Renishaw tool and part probe.

Has a 14" wide by 7.5" depth working limits. Works great with no issues! Features listed below. -10 tool ATC Automatic Tool Changer -Power Draw Bar -Flood coolant -Fog Buster Coolant -All Tool holders and Tooling shown in pictures. -4th Axis w/ 4 jaw chuck -Vise -One way needle bearing tool holder for tightening and loosening tools (fabricated on this machine in picture) -Tool chest with everything in it. (endmills, tool holders, fixturing, tool setting, lubricants)

Number of axes: 3, table dimensions: 1210x267mm, max. spindle speed: 4000rpm, weight: approx. 2t. An on-site inspection is possible.

Number of T-slots: 8, rated current: 23A, controls: CONTOUR 3, with tool magazine. An on-site inspection is possible.

x-travel: 1550 mm y-travel: 400 mm z-travel: 500 mm table-size: 1850 x 350 mm spindle taper ISO: Sk 50 spindle turning speed range: 40 - 1800 U/min quill stroke: mm total power requirement: 7,5 KW weight of the machine ca.: 2,8 t dimensions: 2,4 x 2,2 x 2,1 m Universal Milling Machine - 3-axis digital readout - Central lubrication system - Coolant system - Machine lamp - Machine leveling feet - Chip guard - Emergency stop device - Mobile workbench incl. tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PART NUMBER 7753 SPECIFICATIONS - max diameter of machined dowels 130mm - 110mm bushing fitted - max diameter of input material 160mm - min length of input material 800mm - max machining allowance per side 15mm - 15kW knife head drive motor - 3 types of feed speed + front/rear - 1.1kW feed motor In sequence: - 3 toothed pulling shafts - 3-knife head - 3 smooth pulling output shafts - Dimensions L/W/H 3100x1400x1500mm - weight 2100kg ADVANTAGES – Polish production – 3-knife head – used beam, very good condition Net price: 32900 PLN Net price: 7833 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Travels: X-axis 500 mm, Y-axis 200 mm, Z-axis 400 mm Tool holder SK 40, spindle speed 40-2000 rpm, Table clamping area 830 x 240 mm, weight of the machine 1,100 kg Equipment and accessories: • Vertical milling head with quill • Feeds and rapid traverse in all 3-axes • Various tool holders, collets • Hydraulic vise • Coolant device • Documentation • Bellows damaged

Rotational speed: 0-3150/min, power supply: 20A, connected load: 9kW, control: Heidenhain TNC 155, length: 2700mm, width: 2900mm, height: 2000mm, weight: 2.3t. An on-site inspection is possible.

X-axis: 600mm, y-axis: 600mm, z-axis: 450mm, infinitely variable speed range (vertical and horizontal): 10-6,300rpm, AC main spindle drive power at 44% duty cycle: 9kW, drive power at 100% duty cycle: 6kW, max. torque: 800Nm, braking: electrical, number of gearbox stages: 4, max. spindle torque at 44% duty cycle: 800Nm, tool holder: SK40/ DIN69871, retention knob: DIN69872 B, min. clamping force: 12,000N, min. unclamping force: 3,000N, clamping surface of angle table: 530x900mm, number of T-slots: 8, T-slot width: 14H7, T-slot spacing: 63mm, max. workpiece weight: 400kg, coolant tank capacity: 150l, flow rate: 20l/min, connected load: 15kW, with tool holders and documentation. An on-site inspection is possible.

HEYLIGENSTAEDT HEYMUNILL 3200-P in heavy-duty portal design with fixed crossrail, suitable for machining large and heavy workpieces. Large working area with travels of X 6,000 mm / Y 5,000 mm / Z 1,500 mm, as well as a table size of approx. 5,000 x 3,000 mm and a table load capacity of approx. 50,000 kg. Portal clearance approx. 3,220 mm width / 2,050 mm height. 5-axis machining / milling heads A- and B-axis (swivel axes in the milling head) C-axis (360° rotation) Simultaneous 5-axis machining possible (with fork head) Milling heads: Straight milling head FK 120/340 90° angle head WFK 100/750M Fork head FK 100/2D Milling head magazine: 5 positions Automatic milling head change Additional equipment: Internal cooling (IKZ) approx. 7 bar Tool changer 32 positions (SK50, Fibro ATC 32/50) Tool holder SK50 (DIN 69871) Tool measuring system (laser) Chip conveyor Coolant system Adaptive feed ...

POS POSmill H 800 U – 5-axis machining center The machine is designed as a 5-axis machining center and features a swivel axis with a range of -120° to +120°, as well as a rotary table with a continuously rotating 360° C-axis. A separate A-axis is not available. The working area is realized by a high-quality Kessler rotary table with a diameter of 800 mm. The machine is not equipped with a pallet changer. A key highlight is the 96-position tool changer, making the machine ideal for series production as well as complex machining tasks. In combination with the integrated through-spindle coolant system (IKZ) with 50 bar, the machine is well suited for demanding applications in toolmaking and the automotive industry. Operating data: Control ON: approx. 25,280 h Machine ON: approx. 24,730 h Program run: approx. 9,150 h Spindle hours: approx. 8,555 h

POS PosMill Type C1050 – Universal Milling Machine Universal milling machine with travel paths X 1,050 mm / Y 530 mm / Z 630 mm and table size 1,150 x 560 mm. CNC control HEIDENHAIN iTNC 530. Hydraulic system for precise movements. Equipment: Coolant system and chip conveyor. Machine with protective devices and emergency stop system.

POS PosMill Typ 1100 3-axis CNC milling machine Vertical CNC machining center with a machine table size of approx. 1,050 x 600 mm. Equipped with a HEIDENHAIN TNC 430 CNC control. Automatic tool changer. Equipment: cooling system with through-spindle coolant (IKZ), hydraulic system, and chip conveyor.

Control Heidenhain ... TNC 430 Clamping table surface... 800 x 400mm Axis X ... 500mm Axis Y ... 400mm Axis Z ... 400mm ISO 40 Spindle speed ... 0-4000 rpm. Max. workpiece weight ... 300kg L x W x H ... 2800x2700x1980mm Machine weight ... 2600kg Main engine power ... 5.5kW The machine is in good condition.

Thread milling machine WMW GFL 400x2000 with change gears.