mill pin used for sale

Manufacturer: Homag KF, for right machine side: Geräteträger mit Verstellung, Number of motors: für linke und rechte Seite, Motor : komplett mit Aggragaten, kW-Leistung : und Verstelleinheit,

Manufacturer: Homag Kantenfräsgerät, Ersatzteil aus Maschine: Homag KF 62, für Maschinenseite rechts: yes, Motorenanzahl: 2, kW-Leistung : 0,55, Volt/Hz : 380/165, Drehzahlen U/min : 12000, Siko Anzeige : no, Horizontal Rollentastung : yes, Vertikale Rollentastung: yes, pneumatisch ansteuerbar: no, Schwenkbar vertikal: yes,

Manufacturer: Sägeaggregat, Type: für CNC, Werkzeugdurchmesser mm: 180, Bohrung mm: 30, Zustand: gut, HSK 63: yes, pm: 6000,

MAHO MH-700 with numeric control X, Y Table size: 800x300 Working area: X-450,Y-250,Z-300 Spindle taper: MK3 Feed range: 7-250mm/min Vertical head swiveling 90 degreess Power: 3KW Dimensions: 1300x1200x1700

Automatic double copy milling machine - longitudinal copy milling machine Manufacturer: Wigo Model: 1075 Working length: Workpiece with straight end faces .. 1300mm Wersktück with rounded end faces .. 1000mm Working width: max. 200mm Working height: max. 130mm Feed continuously 0.5 - 12 m/min Milling units: 2 x 4 KW Hydraulic unit: 1.1 KW Additional 2 milling unit on the right side. Clamping cylinder pneumatic: 2 pcs.

The Hot Strip Mill at JFE Steel’s Keihin district stands as a testament to cutting-edge steel production technology, boasting the capability to manufacture Japan's widest hot-rolled steel strip. Commissioned in 1979, the mill has been continually upgraded throughout the years to maintain its competitive edge. Production ceased in September 2023, leaving behind a legacy of excellence. It features a Pair Cross Shift Mill for adaptive roll gap control to optimize thickness and shape. A key enhancement was the integration of a Sizing Press in 2009, which allows for variable strip widths while using slabs of constant width. This not only increases the productivity of the slab caster and reheating furnace upstream but also expands the range of products that can be manufactured efficiently. Capable of rolling slabs measuring up to 2,300 mm in width, with thicknesses ranging from 160 t ...

Originally commissioned in the 1980s, the Tandem Cold Mill at JFE Steel's Keihin plant undegone a significant modernization in 2007 to meet high standards. Upgraded with a state-of-the-art pickling line and carrousel tension reel, the 5-stand PLTCM integrates advanced technologies from industry leaders Mitsubishi, Hitachi, and IHI, enhancing the system’s reliability, productivity, and quality control. Make: MITSUBISHI-HITACHI-IHI Year of manufacture: 2007 (integrated to TCM from 1980s) Mothballed since: Ceased production in March 2019 Production capacity: 1,200,000 tons per year Rolling direction: Right to left (right hand line) Processed material: Low carbon steel Strip width: 600 – 1,350 mm Strip thickness: 1.8 - 4.5 mm entry 0.12 – 1.6 mm exit Coil weight: max. 32,000 kg entry max. 45,000 kg exit Line speed: 250 mpm PL section  ...

Rieter Fine Rolling Mill - GSA 1,000800

Stock - No. 2537 1 used,, functionally tested cutting mill/granulator Manufacturer: Alpine Hosokawa Type: RO 50 / 80 Built: 1993 Material feeding hopper: 500 x 840 mm Opening hydraulic Rotor diameter 500 mm x width 800 mm Rotor semi-open, 4 rotor V-cut - 2 Fixed blades Drive 55 kW Sieve diameter 10 mm Blower and Cyclone Throughput up to approx. 800 kg/h depending Material Machine is ready for demonstration from the Wuppertal plant, Date by appointment More granulators from stock ready to show, Ask for our current stock list or visit : plasticotrading

Britsh Rema Classifier Mill

Make: Fryma Line ML 250 / MZ 250 for soy milling, production of soy milk Perforated disc mill: 45 kW Colloid mill: 60 kW Capacity: approx. 7000 l/h (soy milk) Dimensions LWH: 1700 x 1500 x 1550 mm Weight: approx. 1100 kg

CME FU2 universal milling machine. Table: 1400x300mm. Longitudinal travel: 1050mm. Cross travel: 300mm. Vertical travel: 500mm. ISO40. Hure head. Speeds range: 12. (40-1800rpm). Motor power: 7,5Kw. DRO Fagor for 3 axis.

Mikron WF31D Precision Milling and Drilling Machine Machine with chips and splash guard cabin Equipped with a Heidenhain TNC355 controller Technical Specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shifting step gearbox and Poly-V belts. Vertical spindle can be extended by 90 mm; Conversion from vertical to horizontal machining possible. Ball screws with DC drives allow simultaneous feed movements. Guides are protected against dust, chips and coolant. Specifications Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Perpendicular movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equip ...

Efficient

Lid FP 4 A Used machine (very good) Control mode Conventional Built in 1992 Operating hours approx. 500h Price 12,000 € net plus VAT Dimensions 2500x2500x1900 Weight 2000 kg Location Haiger Description Universal tool milling machine of the brand lid suitable for tooling, fixture construction, training as well as mold making Travel: 560/500/450mm Control : Dialog 11 Technical data Control CNC Dialog 11 Table 900x530mm Longitudinal path (X,Y,Z axis) 560/500/450mm Tool changer no Tool holder: ISO 40 Vertical spindle speeds: 31.5-5000rpm

Description Universal tooling machine from Lid suitable for tooling, fixture construction, training as well as mold making Technical data Year of construction / YOM 1991 Speeds / Spindle 63 - 6300 rpm Steuerung Control CNC Grundig Dialog 11 Vorschübe / Feeds 2 - 3000mm/min Tisch / Table 910 x 530mm Recording / Taper ISO 40 Way / Travel (X,Y,Z) 600x500x500mm Weight /Weight ca 1830kg Changer / Tool changer No Dimensions / Dimension 2500x2000x2000mm Travel: 600x500x500mm Speed: 31.5 - 6300 rpm The machine comes from a tool making and has been regularly serviced.

High-performance milling spindle, unused                high speed milling spindle, unused   Machine model: MFWS 1709/24/72 VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                                         FS 40-10-30-4- AOW                                                                                B 812LD 9913 - 319416 spindle speed/ infinitely variable: 150... 5300 rpm taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

High-performance milling spindle, unused                high speed milling spindle, unused  high speed milling spindle, unused/new   Machine model: MFWS 1709/24/47/VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                            FS 40-10-30-4- AOW                                                                  B 812LD 1551 - 230 30 84 Speeds/ spindle speed/ infinitely variable: 150... 5300 rpm Wz recording /taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knife: 4 Rotor blade: 7 x 4

front roll 560x1500 for mixing mill Buzuluk 14823

rear roll 560x1500 for mixing mill Buzuluk 14823

Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)

HBM STANKO 2A622 CNC

Table clamping area: 290 x 1250 mm Table movement x: 800 mm Table movement y: 360 mm Table movement z: 450 mm Milling head pivotable: 90/45 ° Spindle holder: ISA 40 Spindle speeds: 56 - 4500 rpm Pinolene stroke: 125 mm Pinolene feeds: 0.035; 0,14; 0.7 mm/min Spindle drive: 1.8/2.4 kW Space requirement: 2000 x 1900 x 2300 mm Weight: 1700 kg

Colloid mill Manufacturer: Probst & Class (PUC) Type: N60/S Factory no.: 87079 Power: 2.2 kW 380 V with on-off button n=2825 rpm miti hopper, circulating line & three-way valve very good condition LWH: 700 x 300 x 740 mm

Colloid mill (vibration colloid mill) Manufacturer: Probst & Class (PUC) Type: JV14 N°: 67017 with hopper Engine: Loher & Sons Power: 1.5 kW 2880 rpm normal-toothed grinding set very good condition On-off button Product outlet milk pipe union mobile on lockable wheels LWH: 840 x 350 x 350 mm

Used only for experiments.

Stock# U2462-4 Used ball mill with stainless steel drum. Polish made. Total volume about 1500 l. Working volume about 500 l. Belt driven by el motor 4 kW, 1410 rpm, 220-380 V, 50 Hz and reducer. Mounted on carbon steel supporting frame. Includes local control panel and alumbit milling balls. Last time used in chemical production (mineral pigments).

Granulator - Moditec Digicolor Gplus1 / New, unused (2 pcs.) Year of Make: 2016 Location: Lodz, Poland Description: Slow-Moving Granulator with Gearbox Granulate mill is used for grinding the very hard details, waste - just like the crusher Power: 2.2 kW 6 stator blades, 1 x push, rotor with milling cutters Hopper inlet: 220x170 mm Grinding chamber opening: 240x180 mm Granulator without sieve, regulation of the mill thickness by means of the hole adjustment between the milling machine and stator knife Hole for material case is prepared for connection with suction conveyor When the shredded molding is blocked/clamped in the cutting chamber, rotor knife will retract and it will restart to crush the molding. Drawer for material case with mixer All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technica ...

Bead mill Manufacturer: Fryma Type: MSZ-12 Factory no.: M12362 Pressure product space: 2.5 / 0.2 bar Pressure double jacket: 2.0 / 0.2 bar Power: 2.5 kW 380 V Machine in EEx protection Rotor speed controlled Feed pump speed-controlled with pressure & temperature gauge Grinding set as good as new Switchgear in EEx protection very good condition Weight: approx. 150 kg LWH: 700 x 600 x 750 mm

Granulator - Wanner D25.38 s Year of Make: 2011 Location: Lodz, Poland Description: Slow-moving granulator with gearbox, with cyclone and dedusting Power: 7.5 kW 2 stator blades, 18 rotor blades, the sieve - interchangeable Rotor and blade are cooled with water Hopper inlet: 430x380 mm Grinding chamber opening: 390x290 mm Automatic feeding of the regrind to the big bag It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is changed often All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hammer mill Manufacturer Faller used, outdated Engine AEG Type AN 200 LS 2 230 V 91 A 30 KW Speed 2935 rpm can also be used as a wet mill with attachable screw forced insertion for heavy-flowing products Dimensions Width 1400 mm Height 1000 mm Depth 1000 mm (incl. engine) Drum box width 250 mm Drum diameter 550 mm Funnel 350mm x 400 mm Screen plate 20x4 mm (stretch metal) Changes and errors in the technical data, data and prices and intermediate sale reserved.

Granulator - Wittmann M2/CM5 (5 pcs.) Year of Make: 2011 Location: Lodz, Poland Description: Slow-Moving Granulator with Gearbox Power: 1.1 kW 2 stator blades, 2 x push, rotor with the milling cutters Hopper inlet: 240x210 mm Grinding chamber opening: 240x116 mm Granulator without sieve, regulation of the mill thickness by means of the hole adjustment between the milling machine and stator knife Granulate mill is used for grinding the very hard details, waste - just like the crusher Hole for material case is prepared for connection with suction conveyor All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

New drive shafts for Vertical and Universal Fraeshead FU 400 - FW 400 HECKERT Germany Price 900,-- Euro per square plus VAT

Qty. 1 Second-hand milling and scalping machine – Copper and brass strip – stopped in 2010 Mfc.: Torrington Type: FR1 Built: 1976 Milling and scalping from the upper and lowe sides Strip width: 508 - 770 mm Strip thickness: 10.0 – 13.5 mm Coil weight: 6.5 Ton Capacity: approx. 200 000 T/annum

Granulator - Shini SG-2427H Year of Make: 2007 Location: Lodz, Poland Description: Slow-Moving Granulator with Gearbox Power: 1.5 kW 2 stator blades, 2 x push, rotor with the milling cutters Rotor is cooled with water Hopper inlet: 270x240 mm Grinding chamber opening: 290x260 mm Granulator without sieve, regulation of the mill thickness by means of the hole adjustment between the milling machine and stator knife Granulate mill is used for grinding the very hard details, waste - just like the crusher Hole for material case is prepared for connection with suction conveyor All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Used mill made by Comec, model MM-12. New 2014. Weight 650 kg, 12 L, 30 kW, 6 Bar, CE, Eex dIIB T4. Control panel.

Müro paper milling machine; Condition New; Makita machine; Connection to the milling head for suction.; for milling blocks; 5 pcs. available. Paper mill Müro; condition new; Makita nachine; connector at the milling head for dust suction; used for milling blocks; 5 pic. on stock.

rpm : 6.300 Weight : 220 kg.

KIMLA BPF 1530 CNC router was built in 2014 in Poland by POLCOM Przemysław Kimla. The machine, dedicated to both small and medium-sized businesses, is the perfect choice for precision machining of a wide range of materials. All machining processes, i.e. milling, cutting and engraving, are performed on a large vacuum table by a powerful high-speed spindle. X,Y,Z axes are, in turn, driven by reliable digital servo drives that provide the appropriate acceleration and speed in each direction. The BPF 1530 CNC milling machine is offered with an extensive range of equipment, consisting of, among others, a BECKER vacuum pump and a tool correction sensor. The machine has undergone regular maintenance and servicing. During the last service in the second half of 2024, the vanes in the vacuum pump were replaced. It is also possible to purchase an additional new spindle at a net price of 2250 EU ...

PLOT ELECTRONICS SENTINEL N 2160 CNC router was built in 2021 in Poland by PLOT Electronics. This extremely efficient machine is the perfect choice for precision machining of a wide range of materials, i.e. aluminium, plastics and wood. The machining process is performed on a large vacuum table by means of a reliable, high-speed spindle. X,Y,Z axes are in turn driven by reliable servo drives, which provide appropriate acceleration and speed in each direction. All this is complemented by a light, yet rigid design that eliminates any vibrations during even the most intense challenges. The offer price includes extensive equipment, consisting of, among others, a vacuum pump and advanced cncGraF Pro software. The SENTINEL N 2160 CNC milling machine weighs approximately 2000 kg. Technical specifications of the PLOT ELECTRONICS SENTINEL N 2160 milling machine - software: cncGraF Pro - mach ...

For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...

Technical Specifications - Bridgeport Series I Table Size / Work Surface 9" × 49" (≈ 299 mm × 1245 mm) T-slots 3 pieces, spacing 2.5" (≈ 64 mm), groove width 0.625" (≈ 16 mm) Travel X (Transverse) without Power Feed: 36" (≈ 914 mm) with power feed: 33" (≈ 838 mm) Travel Y (Transverse to Feed) 12" (≈ 306 mm) Quill Stroke (Drilling Spindle Stroke) 5" (≈ 127 mm) Knee Lift (Z-Axis of Table) 16" (≈ 406 mm) Ram Adjustment (Head Stem on Ram Slide) 12" (≈ 306 mm) Min. / Max. distance spindle axis to table nose (spindle/table nose distance) min: 2.5" (≈ 64 mm) Max: 18.25" (≈ 463 mm) Min. / Max. distance spindle to column front (minimum/maximum internal width) min: 6.75" (≈ 171 mm) max: 18.75" (≈ 476 mm) Spindle / Quill Spindle Diameter: 1.875" (≈ 48 mm) Quill Diameter: 3.375" (≈ 86 mm) Spindle holder (standard): R-8 Spindle motor / power 30 minute ...

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Used sand miill Vollrath type VMSM 2/15 A. Two chambers 15 L volume each. Motor 24 kW, weight 1050 kg.

Union boring mill CBFK 150/2 from 1990 for sale. Is currently still in use,. Technical details / accessories / addition: x-travel 3000 mm y-travel 2000 mm z-travel 1600 mm Spindle diameter 150 mm Spindle holder ISO 50 Spindle stroke 700 mm Spindle speeds - infinitely variable 5 - 2500 rpm Rapid traverses 10000 mm/min Table clamping area 1600 x 2000 mm Workpiece weight approx. 20 t Spindle drive motor 50 kW Feeds x/y/z - infinitely variable 1 - 9999 mm/min Table positioning 360,000 ° Total power requirement approx. 70 kW Machine weight approx. 40 t Dimensions approx. 6.0 x 8.0 x 4.5 m In 2005: new 5-axis CNC control Dr. Heidenhain TNC 430 - electron. Handwheel HR 410 for all axles with V24 interface, punched tape reader, new electrics, new hydraulics, new servo motors, 60-speed chain tool change magazine model WM III k02 B-axis (round table adjustment) 360,000  ...

Table clamping area: 350 x 700 mm x-path: 500 mm y-way: 320 mm z-way: 400 mm Spindle holder: SK 40 Spindle speeds: 30 - 2500 rpm Operating voltage: 380 V Total power requirement: 2.2 kW Space requirement: 1500 x 1500 x 1800 mm Weight: approx. 1700 kg

Drives: 45 KW + 15 KW Weight: 2100 kg Dimensions: L 3.50 m x W 1.36 m x H 1.52 m;