mill pin used for sale

General SKUR1226 LocationBarneveld MakeAlpine Augsburg (D) Type710-CW No.15972 Year of construction1974 Main Features Motor55 KW Inlet diameter710 mm Specified Features - Pin Mill Pin disc millcheck 2 Driven rotorscheck Rotor size710mm Number of pins on house side:186 Number of pins on door side:278 Pin diameter10mm With hoppercheck Inlet120x400mm Feeding with rotating valvecheck Motor(2x) size unknown ca. 55 kW each Pin Mills MaterialMild steel Information Floor space2,2x3,5 m Weight5000 Kg Floorspace2,3x2,2 M Total height2,3 MPin MillsAlpineMills > Pin MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU298X414 MakeNetzsch TypeCUM-250/SP LocationBarneveld Main Features Motor11 KW Inlet diameter95 mm Width250 mm Specified Features - Pin Mill MaterialStainless steel 1.4306 (304L) Pin Mills Pin disc millcheck Rotor size50 mm Grinding room sizeDia. 250 mm Number of pins on house side:85 Number of pins on door side:108 Pin diameter8 mm Without sieve cagecheck Housing dimensions Dia. 400 mm InletDia. 95 mm Motor11 kW, 380 volt, 990-2955 rpm, (Ex) With variable speed drivecheck Speed990 rpm Information No.7297 Year of construction2000 Year of construction2000 Floorspace0,70x0,90 m Floor space0,70x0,90 m Total height1,33 m Weight400 kgPin MillsNetzschMills > Pin MillsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welco ...

General SKU416W1314 LocationBarneveld CEcheck MakeLessine Main Features Motor7.5 KW Inlet diameter100 mm Width100 mm Specified Features - Pin Mill MaterialStainless steel 1.4306 (304L) Pin Mills Pin disc millcheck Rotor size270 mm Grinding room size320 mm Number of pins on house side:45 Number of pins on door side:100 Pin diameter12 Housing dimensions Dia. 400 mm InletDia. 100 mm Motor7,5 kW (400 V, 1470 rpm) Speed3000 rpm Information TypeEL 100 No.21-1132 Year of construction2021 Mounted on framecheck Floor space0,70x1,30 m Total height0,70 m Weight500 kgPin MillsLessineMills > Pin MillsBrand > Lessine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...

General SKUR1227 LocationBarneveld MakeAlpine Augsburg (D) Main Features Inlet diameter710 mm Specified Features - Pin Mill Pin disc millcheck 2 Driven rotorscheck Rotor sizedia 710mm Number of pins on house side:186 Number of pins on door side:278 Pin diameter10mm Inlet120x400mm Feeding with rotating valvecheck Pin Mills MaterialMild steel Information Type710-CW Year of constructionunknown, manufacturer plate is missing Floorspace2,3x2,2 M Total height2,3 M Weight3500 KgPin MillsAlpineMills > Pin MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU255X230 LocationBarneveld MakeHosokawa Alpine Main Features Motor1.5 KW Inlet diameter50 mm Width100 mm Specified Features - Pin Mill Pin disc millcheck Rotor size100 mm Grinding room sizeDia. 180 mm Number of pins on house side:192 Number of pins on door side:192 Pin diameter0,3 mm Without sieve cagecheck Housing dimensions Dia. 180 mm With hoppercheck InletDia. 50 mm Feeding with vibro feedercheck 230 v. (Ex) Motor1,5 kW (400 v., 2835 rpm, (Ex)) Speed17500 rpm Information Type100 UPZ No.62390 Year of construction1998 With switchgearcheck (as is) Floor space0,40x0,60 m Total height0,95 m Weight55 kgPin MillsNew arrivalsHosokawa AlpineMills > Pin MillsNew arrivalsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You  ...

Drive : 75 KW Dimensions : L 3800 mm x W 1600 mm x H 2200 mm Weight : 3900 kg.

General SKU296U565 LocationBarneveld MakeWAB-Bachhofen TypeKD 45 No.760735 Year of construction1976 Main Features MaterialStainless steel Volume45 Ltr. Motor33 KW Specified Features - Sand mill Materialstainless steel 1.4721(heat resistant), Stainless steel 1.4306 (304L) Horizontal sand millcheck Capacity45 Ltr. Housing dimensions Dia: 290x750 InletDia: 30mm OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor33 kW, 380Volt,985rpm (EX) Rotor speed985rpm With ballscheck CapacityCap. range 180-1000 l/h With pumpPonndorf, PX15 Motorcheck Information With switchgearcheck(as is) Total height1,8 m Weight1200 kg Floorspace1,4x1,0 m ATEX compatiblecheckSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinat ...

General SKU303U611 LocationBarneveld MakeDYNO-Mill WAB Bachofen TypeECM Poly No.070215 Year of construction2007 Pressure Working pressure4 Bar Main Features MaterialStainless steel Volume8.2 Ltr. Motor24 KW Specified Features - Sand mill Materialsilicon, Stainless steel 1.4112 Horizontal sand millcheck Capacity8,2Ltr. Housing dimensions Dia: 220mm InletDia: 30 mm OutletDia: 30 mm With mechanical sealcheck With jacketcheck Max. temperature5-85°C Motor24kW, 380-420/655-725 Volt, 1477rpm (Ex) Rotor speed1251 rpm Without ballscheck Information Mounted on framecheck With switchcheck With switchgearcheck(as is) Weight1000kg CEcheck Floorspace1,40x0,78 m Total height1,68 m ATEX compatiblecheckSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new --  ...

General SKU296U567 MakeDYNO-MILL WAB Bachofen LocationBarneveld TypeKD 60 Main Features MaterialMild steel/Stainless steel Volume60 Ltr. Motor45 KW Specified Features - Sand mill MaterialMild steel, stainless steel 1.4000 (aisi 429) Horizontal sand millcheck Capacity60 Ltr. Housing dimensions Dia: 290x960mm InletDia: 30mm OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor45 kW, 350/660Volt, 1475rpm Rotor speed900rpm Without ballscheck Capacitycap. range 200-1300 l/h With pumpcheck Motor0,37kW,230/400Volt, 1375rpm Information No.910820 Year of construction1991 Floorspace2,1x1,3 m Total height1,8 m Weight1500 kgSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to  ...

PINNACLE DV - CNC PORTAL MILLING MACHINE Year of construction 2010 Mitsubishi M70 Table : 2200 X 1200 mm X-axis travel 2200 mm Y-axis travel 1200 mm Z-axis travel 1000 mm Motor power: 32 kW With tool changer Total weight : 19t approx. Horizontal Head 90 Degree

We offer you 10 used safety pins manufacturer Jung Heinrich for sale. - incl. shipping throughout Germany - Technical data for the locking pin: Shelving system: Jung Heinrich Type: Esmena Included are: 10x Safety pins, used Material color: complete. galvanized Weight: 0.009 Kg / Pcs. To secure the longitudinal beams against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

We offer you 10 used safety pins from the manufacturer Hovuma for sale. - incl. shipping throughout Germany - Technical data for the locking pin: System: Hovuma Included are: 10x Safety pins, used Material color: complete. galvanized Weight: 0.024 kg/pc for securing the longitudinal beams stand out against unintentional Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

We offer you 10 used safety pins manufacturer Bito for purchase. - incl. shipping throughout Germany - Technical data for the locking pin: Shelving system: Bito Type: PL - 38 / PRO Included are: 10x Safety pins, used Material color: complete. galvanized Weight: 0.006 Kg / Pcs. To secure the longitudinal beams Against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

We offer you 10 used safety pins from the manufacturer Nedcon for sale. - incl. shipping throughout Germany - Technical data for the locking pin: Shelving system: Nedcon Type: AS Included are: 10x Safety pins, used Material color: complete. galvanized Weight: 0.022 Kg / pcs. To secure the longitudinal beams Against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

We offer you 10 new safety pins for purchase. - incl. shipping throughout Germany - Included are: 10x Locking pins, new Material color: complete. galvanized Usage: Universally applicable Head diameter: 9.74 mm Pin diameter: 4.90 mm Weight: 0.007 Kg / Pcs. To secure the longitudinal beams against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

We offer 10 new safety pins for purchase. - incl. shipping throughout Germany - Included are: 10x Locking pins, new Material color: complete. galvanized Usage: Universally applicable Head diameter: 17.70 mm Pin diameter: 7.86 mm Weight: 0.030 Kg / pcs. To secure the longitudinal beams Against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

We offer you 10 used safety pins manufacturer Stow for purchase. - incl. shipping throughout Germany - Technical data for the locking pin: Shelving system: Stow Type: Pal Rack NS Included are: 10x Safety pins used Material color: complete. galvanized Weight: 0.020 Kg / Pcs. To secure the longitudinal beams Against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

Bainite (India) model BMPX150 PIN type cold feed extruders, Year of manufacture 2013 Screw diameter: 150mm L/D ratio 16:1 Output: 1200 - 1500kg/hr Power roller feed (opening 175mm), provision for cooling, Screw speed: variable max 50rpm, Max operating pressure: 340bar (5000psi) 10 rows of 8 pins (80 total) With 210kW Siemens AC v/s motor through 28:1 reduction gearbox (service factor 1.75) Hinged extrusion head with C'clamp suitable for strip All mounted on a fabricated steel base Complete with electrical controls and VFD (Siemens make). Safety features as per European standards.

Key data: 150 mm

Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of construction 2006 Condition: good Weight about 300 kg

Pink VT 1650-850-1950-14 vacuum tray dryer for a total of 42 trays/inserts with the dimensions of 500 x 800 mm (3 per shelve), usable inner dimensions of the chamber 1710 x 985 x 1950 mm (WxDxH), outer dimensions of the chamber 1940 x 1200 x 2230 mm (WxDxH), 13 shelves with the usable dimensions of 1650 x 850 x 110 mm (WxDxH), total shelf area approx. 19,6 m2, total of 14 shelves including floor, heating medium hot water, heating of the trays/inserts, floor and ceiling, maximum temperature 95 °C, maximum operating pressure vacuum chamber -1/+0.1 bar, maximum operating pressure heating system 3 bar, unladen weight approx. 3700 kg, (2 units available)

PINETTE PEI Vertical compression press 1500T SMC, closing force 1500T

Sell a TBT quill block, Condition new. Pinol block has never been installed. Original price is 30.800,00 Euro net. .VB

Perkin Elmer PinAAcle 900 F Flame AAS Perkin Elmer AAS PinAACle 900F F Flame AAS True double beam, 8 –lamp mount, Fibre Optic light path automated flame and burner optimization PC and Perkin Elmer WinLab Software Lamps on request Last Service 07/2022 with warranty

Ref. -No.: 10314 Manufacturer: PINACHO Year of construction: 2005 Type of control: Konventionell Storage location: Halberstadt Country of origin: Spain Travel quill: 180 mm Turning Diameter: 630 mm Turning Length: 3000 mm Turning Diameter Over Bed: 620 mm Cross Movement. (X-Axis): 365 mm Tailstock Quill Diameter: 72 mm Turning diameter over cross slide: 880 mm

Kay Pini wood sawmill ground clearance 650mm frame stroke 500mm Full hydraulics Saw tensioning hydraulic switchgear

Inv. Num. : 6889 Type: Taurus 260 Producer: Pinacho Created: 2000 Parameters: Control system: FAGOR Maximum turning length: 1500 mm Maximum turning diameter: 520 mm Maximum main spindle power: 11 kW Minimum main spindle speed: 40 1/min Maximum spindle speed: 2500 1/min Number of tools: 8 pieces Spindle bore: 80 mm Length: 4000 mm Width: 1800 mm Height: 1850 mm Weight: 3500 kg Equipment: Bezels (2 pieces)

REF-2531 CARNITECH CT2612 TWIN-LANE SALMON PINBONE REMOVER This machine is designed for removing the pin bones from salmon and trout fillets. Made of stainless steel. Easy operation and cleaning. Only one worker is required. Manufacturer: CARNITECH. Model: CT2612.25. Year: 2003. Capacity: up to 18 fillets/min per lane (total capacity 36 fillets/min). Product size: fillets from 0.5 to 3-4 kg. Voltage: 3 x 400 V + N + PE, 50 Hz, 16 A. Water consumption: 12 l/min. Overall dimensions: length 1,700 mm; width 850 mm; height 1,820 mm. Belt width: 580 mm. Weight: approx. 150 kg.

Pinacho Lathe S-90/180 - With digital display - Width: 200 cm - Depth: 85 cm - Height: 160 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Key data: 400 mm, 1000 mm

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2003 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: 5 - Spindle speeds: 2 - Constant cutting speed: 0-700 / 700-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW G0Cmy7Z - Power DC motor Z-axis: 12 Nm - Power DC motor X-axis: 4 Nm - Motor pump power:  ...

This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information.

Details Turning diameter 165 mm Turning length 1000 mm Total power requirement 2 kW Turning diameter over bed 335 mm Rotary diameter via tool carriage 310 mm large turning diameter via cross slide 168 mm Bed width 250 mm Main spindle diameter 42 mm Main spindle nose CAMLOCK n-5 - DIN 55027 Morse taper 4 Spindle speeds 9 Speed range: 60-2000 rpm max. working feed 0-5000 mm/sec Rapid traverse 5 m/min Shaft diameter 48 mm Tailstock-Spindle Travel 140 mm Machine weight approx. 1100 kg Control CNC Control Name FANUC 21i/210i

Universal CNC cycle separation machine of the brand Pinacho suitable for tooling, fixture construction, training and mold making Circumferential diameter 360mm Center width 1000mm Control Fagor 8055 Tailstock MK 3 Tool station Barufaldi 6-fold Speed 1-4000rpm Connection 380V - 5.5 KW

Universal CNC cycle separation machine of the brand Pinacho suitable for tooling, fixture construction, training and mold making Circumferential diameter 360mm Center width 1000mm Control Fagor 8055 Tailstock MK 3 Tool station Barufaldi 6-fold Speed 1-4000rpm Connection 380V - 5.5 KW

Key data: 400 mm, 1000 mm

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2001 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW - Power DC motor Z-axis: 6.8 Nm - Power DC motor X-axis: 3.4 Nm - Motor pump power: 0.57 ...

Digital Turning diameter 120 mm Turning length 700 mm Spindle speed 2000 min-1 Tailstock

Manufacturer: Pinomatic, Type: Pinomatic U, Year: 2000, Angular transfer: yes, Work piece width min-max mm: 1300, Roller width in mm: 1300, Dimensions L x W x H mm: 3500x5500, Year :2000

Pinomatic cross conveyor for a planing and sawing line Year of construction 2001 Manufacturer Pinomtatic OY Type POS 9+10 S/N P1033 motorised cross conveyor with 7 chain hoists length of the arms: : 6000mm Width of the cross conveyor up to 4000mm ( variable adjustable ) Height: 900mm 6 chain hoists fixed mounted 1 chain hoist can be variably adjusted Voltage 230/ 400VAC

Type: DH 132S 8/4 2,2/3,3 kW 720/1440 rpm For Pinacho lathe SP 90 / 165

A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible

turning diameter: 10/300 mm turning length: 1500mm +/-0.1mm mm control: serial number: 53364 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center width: 1000mm, turning diameter over bed/crank/trolley: 360mm/510mm/205mm, spindle bore: 42mm, speed: 2100rpm, machine dimensions X/Y/Z: approx. 1950mm/900mm/1350mm, weight: approx. 750kg. On-site inspection is possible.

Pinacho SC 200 Ø 402 x 1000 mm Distance between centers: 1000 mm Swing over bed: 402 mm Swing over cross-slide: 380 mm Swing in gap: 560 mm Diametre of main spindle bore: 42 mm Power on main spindle: 4 kW Number of speeds: 40 > 2800 rpm Digital screen: yes Length: 2390 mm Width : 910 mm Height: 1625 mm Weight: 1190 kg

Main spindle: Spindle bore (I.D.): 80 mm Spindle nose: ASA A2-8 Revolver: Automatic 4-cavity turret SQT-190-87-C Lining (front): 3-jaw universal chuck ASA8 Diameter: Ø 315 mm Speed: 1250 rpm Inner Passage (I.D.): 103 mm Accessories: Set of 3 basic jaws Ø 315 mm Accessories: Set of 3 hard top jaws Ø 315 mm Accessories: Set of 3 soft top jaws Ø 315 mm Lining (back): 3-jaw universal chuck (rear) Diameter: Ø 315 Inner Passage (I.D.): 103 mm

weight of the machine ca.: 3,9 t : 50 control: Fanuc changer: 6 fach centre distance: 1500 mm spindle bore: 80 mm available since 22th of september: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=2.25 m, Overall length= 0.67 m, Overall width= 0.9 m, Net weight= 178 kg,

Spectrometer of Perkin Elmer Pin AAcle 900 F, used, fully functional

CNC vertical machining center Type: VMC 1160 Manufacturer: Pinnacle Year: 2011 Control: Heidenhain iTNC 530 X: 1160 mm Y: 610 mm Z: 700 mm Machine in good condition, under power Find more here - / Contact us at -

General SKUR0155 LocationBarneveld MakePink GmbH Thermosysteme Wertheim (DE) TypeVSD-e 300-300-120-2 Machine number2008 4823 Pressure Working pressure0.1 Bar Vacuum possiblecheck Main Features MaterialHastelloy Volume35 Ltr. Surface0.18 m2 Specified Features - Tray dryer Tray dryervacuum Stainless steel housingcheck Stainless steel trayscheck Heating surface0.18 m2 Drying chamber capacity35 Ltr Max. temperature150 degr. C Number of trays2 Tray sizes300x300mm Distance between the trays120mm Max. temperature150 degr.C. With 1 doorcheck Connection for the vacuum pumpDN25 Connections(2x) DN10 Without vacuum pumpcheck MaterialStainless steel 2.4602 (Hastelloy C-22) Information Year of construction2008 Mounted on framecheck With switchgearcheck Floorspace2.2x1,0 M CEcheck Total height2,4 M Weight1150 Kg Extra Specificationsin Pink Isolator, Type ISO 1900-7 ...

General SKU446W1481 LocationBarneveld MakePink Wertheim GmbH Themosysteme TypeWSD 650-650-129-6 Machine number2002 4712 Pressure Working pressure0.1 Bar Vacuum possiblecheck Working pressure trays4 Bar Main Features MaterialHastelloy Volume350 Ltr. Surface2.53 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housing1.4301 Heating surface2,53 m2 Max. temperature95°C Number of trays6 Tray sizes650 x 650 mm Distance between the trays120 mm With 1 doorcheck Connectionscheck MaterialStainless steel 2.4602 (Hastelloy C-22) Information Year of construction2002 Mounted on framecheck Floorspace1,20 x 1,70 m CEcheck Total height1,90 m Weight1060 kg Extra SpecificationsWith QVF glass condensor bowl, volume 7 l. :Tray dryersPink WertheimDryers > Tray dryersBrand > Pink Wertheim What you can expect from Foeth: -- Machine is in working condition --  ...

Manufacturer: Pinacho Model: Smart Turn 6/180 Power: 7.5 kW Frequency: 50 Hz Control: FANUC CAPACITY • Center height: 180 mm • Center width: 750–1000 mm • Permissible diameter over bed: 360 mm • Permissible diameter over longitudinal slide: 335 mm • Permissible diameter over cross slide: 198 mm • Bed width: 250 mm SPINDLE • Spindle bore: 42 mm • Spindle nose: CAMLOCK no. 5 (DIN 55027 no. 5) • Spindle taper: Morse taper no. 4 • Number of spindle speeds: 1 • Cutting speed (constant surface speed): 0–4000 U/min FEED • Working feed Z,X (mm/min): 0–10000 mm/min • Rapid traverse Z,X (m/min): 10 m/min TAILSTOCK • Tailstock quill diameter: 58 mm • Tailstock quill travel: 200 mm • Tailstock taper: Morse taper no. 3 MOTORS • Main motor power: 5.5 kW • Feed force longitudinal (N): 4500 N • Feed force cross (N): 3500 N • Cool ...