mill pin used for sale

No: M17822 Y.O.M.: 1998 Double-acting mechanical seal Locking pressure station Stainless steel speed-controlled feed pump Dimensions LWH: 1200 x 1900 x 1100 mm Weight: approx. 500 kg

Greerco High Shear Division, USA No. 3-23422 Power: 7.5 kW, ABB with funnel, circulation line, three-way valve on a stable mobile stainless steel frame Machine as good as new, unused Dimensions LWH: 700 x 700 x 1700 mm with double jacket for heating and cooling Weight: approx. 180 kg

Edge thickness max mm: 3 Workpiece thickness max mm: 60 Total connection kW: 1.1 Weight Kg: 110

5 Qty. 1 Continuous 6 Stand Cold Rolling Mill Mfc.: Fröhling Built: 1984 Type: 4-Hi Strip width: 220 mm Thickness: 0.15 – 2 mm 8 Qty. 1 Strip welding machine (Cold mill) Mfc.: A.I. Welders Built: 1986 Rev. in 2002 Speed: 75 – 600 m/min. Width: 233 mm Thickness: 0.175 – 2.0 mm 9 Qty. 1 Induction Treatment Furnace (Cold mill) Mfc.: Otto Junker Built: 1986 Width: 220 mm Thickness: 0.175-2.0 mm Speed: 8-60 m/min. Temp.: 550 °C 10 Qty.1 Quenching unit (Cold mill) Mfc.: Otto Jumker Built: 1986 Flow: 95 m³/h Temperature: 29 °C Size: 1.2 x 1.2 x 2.8 m 11 Qty. 1 Rotary shear (Cold mill) Mfc.: HDE Built: 1996 Strip width: 220 mm Thickness: 0.1 – 0.95 mm

N°: 42969/00 Y.O.M.: 2000 Power: 3.37 kW total Pressure product room: 2 bar pressure-monitored, temperature-monitored Material Product space: Alumium oxide ceramic Feeding pump, hose pump, speed-controlled Rotor speed-controlled Machine unused and as good as new Dimensions LWH: 1000 x 500 x 800 mm Weight: approx. 300 kg

PVS 150 V Multicut with 15 to 22 KW with combinable cutting systems Rotor/ stator non-contact Hole disc with knife head or rotor/stator with perforated disc system 2 cutting stages

No.: 16965 Y.O.M.: 1996 Power: 46 kW total Pressure product room: 4 bar Pressure double coat: 2 bar Temperature max: 130°C Stainless steel version, Pharma water-cooled engine Double-acting mechanical seal with locking pressure station overhauled, very good condition Dimensions LWH: 2000 x 1700 x 2200 mm Weight: approx. 1.4 t

- Structure in stainless steel - Workpiece fixing system - Table adjustable - 2 milling spindles - 2 multifunction drilling spindles - Switch box

Demo Machine Specifications:  Dimensions - 1300 x 1560 x 1210 mm, (with built-in drive and control cabinet)  Dimensions of the packed machine - 1500 x 1800 x 1320 mm,  External dimensions of the mill drum - Ø870 x 1120 mm,  Distance between bearings - 1260 mm,  Height of the drum axis - 860 mm,  Operating capacity - 600 dm3,  Weight of the machine - 641 kg,  Installed power - 5.5 kW,  Input voltage/frequency - 400V/50Hz,  Connector - 32A; 400 V  Milling time range - 1s... 99h59min,  Mill installed on a steel frame,  Drum made of 10 mm steel without inner lining. including first filling 80 mm steel balls Technical specification:  Dimensions - 1300 x 1560 x 1210 mm, (with drive and control cabinet installed)  Dimensions of the packed machine - 1500 x 1800 x 1320 mm,  Mill drum external dimensions - Ø870 x 1120 mm, � ...

Milling machine from a training workshop in very good condition Manufacturer lid Type FP1 Active

Y.O.M.: 1991 Machine No.: M15177278 Power: 18.5 kW with funnel, circulating line with three-way valve LWH: 800 x 600 x 1600 mm Weight: approx. 250 kg Attention: no mechanical seal included, can be reinstalled upon request

Machine No.: 2009.14 Power: 5.5 kW Pharmaceutical version as good as new Stainless steel with funnel (approx. 60 l) Switchgear EEx various spare parts, new cross-toothed grinding set LWH: 800 x 700 x 1400 mm Weight: approx. 120 kg

Factory number: 78046 Power: 24 kW Engine in EEx Switchgear not in EEx with funnel and chute Operating Instructions, spare grinding set LWH: 700 x 700 x 1500 mm Weight: approx. 300 kg

Key data: 100 mm, 1600 mm, 1250 mm

DRO , TABLE 1250 X 1250

x-travel 600 mm y-travel 500 mm z-travel 450 mm Control TNC 415 Heidenhain Main spindle: Speed range - milling 20 - 5,000 rpm Drive power - milling spindle 6 / 9 kW Tool holder SK 40 Quill stroke 90 mm Gear stages 4 swivel +/-90 ° Workbench: Bsi0Cso09Qu Table size 900 x 530 mm T-slots 7 T-slots - spacing 63 mm T-slots - width 14-H7 mm max. table load 400 kg Tool Changer: Number of tool positions 18 pos. Tool holder SK 40 max. tool diameter 85 mm max. tool diameter. with a free neighboring box. 150 mm max. tool length 300 mm max. tool weight 10 kg Tool change time max. 15 sec Feeds: Feed rate - fine adjustment 2 ~ 4000 mm/min Rapid traverse X-axis 6,000 mm/min Rapid traverse Y-axis 6,000 mm/min Rapid traverse Z-axis 5,000 mm/min Total power requirement 15 kW Machine weight approx. 3.6 t Dimensions approx. 3.4 x 3.6 x 2.2 m Tool Milling Machine - Universa ...

Machine number: M16694 Y.O.M.: 1995 Working pressure: 6 bar Double jacket: 6 bar Grinding set normally toothed Power: 60 kW case with double jacket Product-in-outlet milk pipe double-acting mechanical seal LWH: 1100 x 700 x 800 mm Weight: approx. 350 kg

Used machine with 110 KW as a retro-fit machine We are also happy to work on your Stephan machine as in the pictures in the appendix as retro-fit

Fully functional used CNC milling machine Deckel Maho DMU 60 with rotary table Built in 1999 Heidenhain Control We would like to point out that this machine is in excellent technical and well-maintained condition for its age (due to the IATF certification). Regular maintenance is already required on the basis of the certification and the machine therefore works 100% perfectly. The machine is still energized and can be viewed and tested at any time. All maintenance logs are in place. The machine will have to leave the hall in the first quarter of 2025. This means that the machine could remain energized until mid-March 2025 to demonstrate it under power. Of course, the machine would also be available immediately. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your answer and interest in adv ...

Factory number: L10113 Y.O.M.: 1984 Workspace pressure-resistant 4 bar with funnel, switchgear 380 V Circulation line with three-way valve Power: 0.75 kW Grinding set cross-toothed good condition LWH: 300 x 300 x 650 mm Weight: approx. 30 kg

Hammer Mill Manufactured by PESSA Model: MM-14R2000 Complete with main motor of 250 KW

Machine No.: M 15805 Y.O.M.: 1992 Pressure working space: 1 bar Pressure double jacket: 6 bar Inline version horizontal Product Connections Triclamp very good condition LWH: 400 x 260 x 240 mm Weight: approx. 30 kg

Laboratory mill Factory number: L10116 Y.O.M.: 1985 Workspace pressure-resistant: 4 bar with funnel, circulation line and three-way valve Power: 0.75 kW, 380 V Grinding set cross-toothed Mill and grinding set as good as new Switchgear with emergency stop LWH: 300 x 300 x 650 mm Weight: approx. 30 kg

Perforated disc mill Manufacturer: Karl Schnell Type: 080 F 248 N°: 42942 Power: 55 kW with funnel and connector Diameter perforated disc: 6 mm Cutting knives as good as new LWH: 1000 x 900 x 1550 mm Weight: approx. 600 kg

CNC Milling-Turning Center Alzmetall GS 600/5-FDT Milling-turning machine Commissioning 05/2021 At call! Heidenhain TNC640 Spindle HSK-T 63 / 18,000 rpm Balancing system (only for FDT) Kinematics Opt Electr. Handwheel Skiving (only for FDT) Dyn. Collision Monitoring Heidenhain DNC Heidenhain Remote Desktop 3D model of the machine Advanced tool management Operating mode 3 Probe Heidenhain Tool Measurement Blum Laser Signal tower on the machine 18,000 spindle HSK-T 63 Continuous air through the spindle (with lubrication interval) Continuous air from the outside 76 mm tool magazine Spray gun Chip flushing of the working area (recommended for Al) Emulsion Mist Extraction Production package C, 80 bar, hinged belt conveyor Machine Interior Trim Remote diagnostics The options list is complete! No interest in dealer enquiries! No separate dealer price! WB me ...

Universal tool milling machine, used universal milling machine, used Type FU 315 - V/2 Fabr. WMW Heckert Built: 1979 Table size/ table: 1250 x 315 mm Laengsmotion/ longit. move: X: 850 mm Horizontal movement/ horiz. Move: Y: 270 mm Vertical movement/ Vert. move : Z 355 mm Tool holder/taper: ISO 50 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 28 - 1400 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t

Bead mill Manufacturer: Drais Type: PM 1 Factory number: 50215 Y.O.M.: 1980 Power: 0.75 kW in Ex-protection Power pump: 0.12 kW in Ex-protection very good condition Dimensions LWH: 800 x 500 x 850 mm Weight: approx. 100 kg

CNC Milling-Turning Center Alzmetall GS 600/5-FDT Milling-turning machine Commissioning 03/2019 At call! Heidenhain TNC640 Spindle HSK-T 63 / 18,000 rpm Balancing system (only for FDT) Kinematics Opt Electr. Handwheel Skiving (only for FDT) Dyn. Collision Monitoring Heidenhain DNC Heidenhain Remote Desktop 3D model of the machine Advanced tool management Operating mode 3 Probe Heidenhain Tool Measurement Blum Laser Signal tower on the machine 18,000 spindle HSK-T 63 Continuous air through the spindle (with lubrication interval) Continuous air from the outside 76 mm tool magazine Spray gun Chip flushing of the working area (recommended for Al) Emulsion Mist Extraction Production package C, 80 bar, hinged belt conveyor Machine Interior Trim Remote diagnostics The options list is complete! No interest in dealer enquiries! No separate dealer price! WB me ...

Universal milling machine vertically / horizontally from a training workshop Manufacturer Hermle Type FW801 Tool holder SK40 automatic feed in three axes Digital display in three axes Machine technically in very good condition under electricity ready for demonstration Technical data: Travel: x=350mm y=150mm z=220mm Spindle speeds from 50 to 3,150 rpm can be infinitely variable Feed speed infinitely adjustable via rotary pot from 10 to 5,000 mm/min, aisle Special price Used milling machine Hermle FW 801

The Section Mill was commissioned in 2011 including advanced rolling mill mechanical equipment alongside electrics and automation systems utilizing Siemens-brand technology. The rolling reutilized a minor portion of the equipment of the previous rolling mill standing there. Those are the finishing mill stands, the high-speed shear before cooling bed and finishing cold shear. Designed for a production capacity of 600,000 tons per year, the rolling mill can process either billets, blooms, or beam blanks into a wide mix of beams, sections, and flat bars. It features a 120 tph walking beam reheating furnace, a breakdown reversible mill (BDM), a three stands ultra-flexible reversing mill (UFR), and an eight-stand continuous finishing mill. The facility is further equipped with advanced finishing services, including straighteners, cutting saws, cold shear, magnetic stackers, and strapping ...

Engine number: 100573 Y.O.M.: 2004 Power: 25 kW cross-toothed grinding set Pressure double jacket: 6 bar double-acting sliding ring seal Chetra Pressure product space: 6 bar automatic grinding gap adjustment mounted on stainless steel frame LWH: 1200 x 700 x 900 mm Weight: approx. 350 kg

NIP adjustment screw Drawing No. 14204-1168D1

NIP adjustment screw with more grooves

Star Ball Mill, Rotor Ball Mill, Centrifugal Ball Mill, Centrifugal Ball Mill Used. Manufacturer: EHINGER IMPIANTI Type: RM 150 Achievable grain sizes: with dynamic classifier: 0-20 μ and 0-300 μ with static selector 0-2 mm Average continuous output approx. 1.6 t of glass per hour Motor SIEMENS 75 kW 738 rpm 400 V Dimensions approx. 2850 x 4100 x 5000 mm original matching dust filter with fan The mill pictured serves only as a sample. The mill for sale is currently being revised. These mills are now being built by Eirich as an OrbitMill for the fine grinding of industrial minerals. Performance data of the Orbit Mill according to the manufacturer as an example of limestone. Air flow rate 13000 m³/h Limestone Throughput d97= 20 μm : 1.6 t/h d97= 40 μm : 3.3 t/h d97= 105 μm : 6.0 t/h The mill pictured was used in glass recycling. Four balls, which a ...

Perforated disc mill Manufacturer: Karl Schnell Type: 062-F28-248 N°: 42686 Power: 21 kW with funnel and discharge chute Control cabinet with on-off button Plug connection Diameter perforated disc: 6 mm Cutting knives as good as new LWH: 1000 x 900 x 1670 mm Weight: approx. 500 kg

Gearbox TSA 031 370-1-07 Manufacturer VSS Kosice for mixing mill Buzuluk 660x2100 mm , Type 14821 for right side i = 10:1

Table clamping area: 190 x 710 mm Table movement x: 390/360 mm Table movement y: 150 mm Table movement z: 280 mm Spindle holder: SK 40 Spindle speeds: 100 - 3100 rpm Feeds longitudinal 0 - 600 mm/min electr. Connection: 380 V, approx. 1.5 kW Space requirement: 1400 x 1200 x 1500 mm Weight: approx. 680 kg

Bull gear Drawing No. 14272 -161 C1 z = 113

CNC Milling Machine Universal Manufacturer: HERMLE Type: UWF 902 S Year of Make: 1995 Hours: 65 071 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Range: Spindle speeds infinitely variable within 3 switching stages: 20 to 6,300 rpm Tool holder: SK40 Tool Changer Tool holder, horizontal and vertical: ISO 40 DIN 2079 Tool clamping hydromechanical, clamping force (vertical): 10 000 N Tool clamping hydromechanical, clamping force (horizontal): 12 000 N Spindle diameter on front bearing, horizontal / vertical: 75 / 55 mm Quill Ø 100 mm extendable vertical: 75 mm M & H 3D Probe Individual feed motors for each axis – three-phase current (brushless) Feed range in X, Y, Z manual / program-controlled: 1 to 2000 / 10 000 mm/min. Feed force in all axes (at 80% DC): 6 000 N Rapid traverse in all axes: 10 m / min. Angle table: 900 x 458 mm Table wei ...

CNC Milling Machine Universal Manufacturer: HERMLE Type: UWF 902 H Year of Make: 1995 Hours: 46,680 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Range: Spindle speeds infinitely variable within 3 switching stages: 20 to 6,300 rpm Tool holder: SK40 Tool Changer Tool holder, horizontal and vertical: ISO 40 DIN 2079 Tool clamping hydromechanical, clamping force (vertical): 10 000 N Tool clamping hydromechanical, clamping force (horizontal): 12 000 N Spindle diameter on front bearing, horizontal / vertical: 75 / 55 mm Quill stroke vertical: 75 mm Renishaw 3D Probe Individual feed motors for each axis – three-phase current (brushless) Feed range in X, Y, Z manually / programmatically: 1 to 2000 / 10 000 mm/min. Feed force in all axes (at 80% DC): 6 000 N Rapid traverse in all axes: 10 m / min. Angle table: 900 x 458 mm Universal clamping  ...

Table length: 10.800 mm Table width: 1.000 mm Table height: 200 mm Load capacity: 10 t/m Power motor spindle: 22 Kw Max. speed of turning: 1.700 rpm X Axis travel: 7.000 mm Vertical axis travel: 2.000 mm RAM travel: 1.000 mm Total installed power: 60 Kw Rapid feed rate: 15 mt/min CNC ECS 4801 Chip conveyor

Manufacturer: IMA Radienschleifaggregat, Number of motors: 1, kW-Leistung : 1,75, Drehzahlen U/min : frequenzgesteuert, Vertical roller sensing: yes, Slewable horizontally: 400x700x900, Slewable vertically: yes,

Manufacturer: Homag, Type: Schnellwechselköpfe FK 11 / FK 13, FREE TEXT: Preis je Stck,

Drive 210 kW / 985 rpm, 380 V, with starter

Covers for bull gear and friction wheels

For sale various grinding stones for corundum disc mill KORUMA

Manufacturer: Homag Nutsäge mit Winkelgetriebe, Type: 4-00570, Saw blade quantity: 1, Tool diameter mm: ca.160, Used: yes, Anschlussspindel mm: HSk 63, Available: sofort, FREE TEXT: HSK 63 ,

Manufacturer: Homag, Type: 4-00570, Tool diameter mm: ca.160, Used: yes, HSK 63: yes, Angle saw: yes, FREE TEXT: Aggregat ohne Hauben mit Tastschuh/ 9000 U/min,

Manufacturer: Homag Ständer ohne Anbauaggregate , Spare part from machine: Homag ,

Horizontal borer Wotan B105Y Spindle: 120 mm Travels: -X: 3000 mm -Y: 1450 mm -Z: 1280 mm Table: -1400 x 3000 mm -Rotating part: 1130 x 1500 mm (manually rotated to any degrees) -Max load: 7 tn Machine weight: about 25 ton

REALMECA MINI C3X-CNC VERTICAL 1 phase machining milling machine Used for teaching begginers. Perfect condition