mill cnc used for sale

CNC Swiss Automatic Lathe with Bar Loading Magazine Stamag FMB Turbo 5-42 TX8i control system with Traub tool monitoring Main spindle: - C-axis with driven tools - Holder for driven guide bushing, max. passage 26 mm, stroke 225 mm - Electrical and pneumatic control for driven guide bush Sub-spindle: - Counter spindle as motor spindle with hollow clamping and locking device with Z4 carriage - C-axis - Tool carrier lower X1 / Y1 - Axes - 12 tool holders driven - Tool carrier top X2 / Z2 - Axes - 12 tool holders, driven - X3 - Transverse axis for front apparatus / sub-spindle - Front apparatus 5-way with Z3 carriage without tool drive - Tapping side processing station (5 tools) with axis X4 / Y4 without Tool drive - Hinged belt conveyor - Coolant equipment for externally and internally cooled tools, 20 l/min - 30 bar - Equipment for deep hole drilling with comp ...

turning diameter: 590 mm turning length: 1100 mm control: Fanuc turning diameter over bed: 800 mm total power requirement: --- kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is functional and currently still under power, incl. loading magazine Irco Breuning Simag 42.1 for rods max. 3200mm, incl. many tool holders also driven (list can be requested), please contact me if you are interested or have any questions.

turning diameter: 340 mm turning length: 500 mm swing dia.: 695 mm X-Axis movement: 215 mm Y-Axis movement: 100 mm Z-Axis movement: 605 mm Minimum indexing C-Axis main Spindle: 0,0001 ° Number of tools on turret: 12 Number of driven tools: 12 x Spindle speed driven tools: 4500 1/min Spindle motor driven tools: 5,5 / 3,7 kW Tool type: Mazak VDI control: Mazatrol Smooth G Main Spindle:: Spindle Speed: 4000 1/min spindle motor: 18,5 / 15 kW spindle bore diameter: 80 mm 2nd Spindle:: spindle turning speed range: 6000 U/min spindle motor: 7,5 / 5,5 kW spindle bore: 80 mm spindle distance: 605 mm total power requirement: 36,7 kVA Weight: - t dimensions of the machine ca.: - m - Mazatrol Smooth EZ - Main and counter spindle - 12-station tool turret with driven tools and Y-axis - 3-jaw chuck -- Main: 10 -- Counter: 6 - Chip conveyor - Coolant system - Iemca Kid bar feeder (80 mm bar diameter) ...

turning diameter: 600 mm turning length: 1.045 mm control: MSX - 711 III MAPPS III swing diameter over support: 600 mm distance between spindles: 1.255 mm max. bar capacity: 65 mm Main drive 2: turning speed range - main spindle: max. 5.000 min/-1 power capacity - main spindel: 25 / 22 kW no. of turning speeds: 2 spindle nose: JIS A2-6 spindle bore: 73 mm internal diameter: 120 mm C-Axis: 0,0001 ° chucking diameter: 200 mm Milling Spindle:: Speed range Tool Spindle: max. 12.000 min/-1 Power rating Tool Spindle: 5,5 / 3,7 kW tool taper: Capto C5 internal diameter: 65 mm B - Axis: 0,0001 ° swivellable: +/- 120 ° axis stroke:: x-axis: 685 (610 + 75) mm y-axis: +/- 125 mm z-axis: 1.075 + 130 mm turret:: number of toolpositions: 12 pos. Shank height for square tool: 20 mm Drill shank diameter: max. 32 mm tool magazin:: tools in tool magazin: 40 pos. max. tool diameter: 70 mm max. tool ...

Conventional lathe Viktor BJ 1978

Traub TNK 65Year of manuf. : 2016 Control : Mitsubishi TX8i-s ____________Description:Mainspindle:Technology:MotorspindleSpeed:5.000 rpmPower (max.):35 kWTorque (max.):120 NmBarcapacity:65 mmWorkpiececlamping:Hainbuch Spanntop Kombi Axfix Gr. 65Subspindle:Technology:Motor spindle, integrated in tool carrier IISpeed:7.000 rpm:Power (max.):12 kWTorque (max.):22,5 NmChuck:Hainbuch Spanntop Kombi Axfix Gr. 42Toolcarrier I (X/Y/Z):Technology:Turret with 10 stationsTaper:Traub ø45 mmTooldrive:12.000 rpm, 10 kW, 8 NmMovement in X/Y/Z:140/100/300 mmToolcarrier II (X/Y/Z):Technology:Turret with 9 stationsTaper:Traub ø45 mmTooldrive:12.000 rpm, 10 kW, 8 NmMovement in X/Y/Z:140/100/300 mmBackworking attachment:Technology:Backworking attachment with 8 stations (2x synchron, 6x asynchron)Driven Tools:5 stationsTooldrive:12.000 U/min, 6,7 kW, 5,3 NmEquipment/Accessory:Positionsensor:Direct Sca ...

Key data: 600 mm, 2000 mm

Weisser Heilbronn HEKTOR - Cycle CNC lathe - Bosch CC220 controller (in need of repair) - incl. tools & accessories - incl. operating instructions & technical documents - Built in 1992 Technical data: - Center width: 2000 mm - Tip height: 300 mm - Turning diameter over bed: 600 mm - Spindle bore Ø: 80 mm - Quill holder: MK5 - Bed width: 430 mm - Operating voltage: 400 V - Dimensions WxHxD: approx. 4700 x 2300 x 2100 mm - Weight: approx. 8000 kg

Machine: BIESSE CNC Machining Center Table: 3060 x 1260 x 150 mm Solenoid Spindle: 12 kW, ISO30 Cone Tool changer: 10 positions Vacuum pump: 100 m³/h Consoles: 6 with 3 ATS suction cups Drilling Head: 15 Vertical + 4 Horizontal Pins X Saw: Ø125 mm Accessories: 4-position flange, bevel gearbox, flange for aggregates Equipment: chip recovery belt, Biesse WORK software, B_NEST Auction-ID: A1-50215-11

BAIWEI BW-G3015 1,5 kW fiber laser was built in 2019 in China by ZHENGZHOU BAIWEI CNC MACHINERY SHARES CO., LTD. The machine, designed for the precise cutting of sheet metal with a maximum thickness of 14 mm is ideal for both unit and series production. Cutting is performed using a stable fiber beam generated by a RAYCUS 1,5 kW laser source. The fiber laser technology offers greater energy efficiency and higher performance compared to other cutting methods. The BAIWEI BW-G3015 is equipped with a RAYTOOLS cutting head with a range of useful features. The autofocus automatically adjusts the focal position to the thickness of the material being machined. An anti-collision system detects obstacles, reducing the risk of the head colliding with the workpiece. These solutions enable efficient cutting while maintaining a high level of machining accuracy. All process parameters are programm ...

Set: Set of two LOHMEYER NDC642A & NDC602A CNC drills – sold only as a set Type: Automatic Continuous Flow Multi-Spindle Drills Function: Vertical and horizontal panel drilling with automatic feeding and unloading Construction: High-strength steel frame, castings for precision and durability Drill heads: 12 multi-spindle rows with servo motors and digital positioning Control: PLC/PC with touch screen and machine learning for new drilling patterns Total power: approx. 95 kW (38 kW + 57 kW) Dimensions (mm): approx. 11,000 × 3,650 × 2,800 Weight (kg): approx. 14,000 Power supply: 400 V – 3 phases – 50 Hz Year: 2022 Manufacturer: LOHMEYER Notes: Machines sold together and inseparable – same principles as KUPER machines. Equipped with chip conveyors, pneumatic clamping, servo motor control and user-friendly PLC interfaces. Serial number included in the  ...

Machine: WEEKE OPTIMAT BHC 550 machining center Year: 2002 Axle stroke: X 3250 mm, Y 1350 mm, Z 370 mm Table: transom with 6 infinitely adjustable supports (X) Stops: 4 rear stops + 6 programmed front stops, 2 side stops (Y) on aluminium profile Vacuum pump: 100 m³/h Control: Programmable NC Auction-ID: A1-50215-8

STIGAL VXstandard plasma-gas cutting machine was built in 2013 in Poland by STIGAL Marcin Stępień. The machine is used for the precise cutting of large-size sheet metal with a maximum length of 7 metres and a width of 2 metres. The use of both a gas and a plasma torch allows the cutting method to be adapted to current production requirements. The plasma arc is generated by a high-performance CEBORA PLASMA PROF 254 source, which minimises spatter during operation and reduces the need for additional machining of the finished parts. These features make the STIGAL VXstandard suitable for the production of precise steel components used across various industrial sectors. The machine features a stable, open design that provides free access to the work area from all sides. Outside the main work area is a attachment designed for tube machining. All process parameters are programmed using an  ...

Machine Type: TEK.2004F Serial Number: 99050024 Country of Origin: Italy Power: 10 kW Voltage: 380 V Frequency: 50 Hz Amperage: 19.9 A Maximum distance between the 2 external anuba plugs: 2,700 mm Maximum height with head positioned at 0°: 200 mm Maximum thickness with head positioned at 90°: 120 mm Drilling Engine: 1 HP Screwdriving motor: 1 HP X-axis speed: 40 m/min Y-axis speed: 7 m/min Z-axis speed: 7 m/min Overall dimensions: 3,550 x 2,623 x 2,200 mm Machine weight: 1,600 kg Weight of electrical panel: 145 kg Auction-ID: A1-50215-52

Machine: CNC machining center MASTERWOOD 4 WIN Year: 2010 Axle stroke: X 4960 mm, Y 1930 mm, Z 650 mm Digital axes: 4 + C-axis Electrospindle: 17 kW HSK63E with dimmer, dedicated cooling Tool magazines: 10 in. head, 16 in. rear carriage, 18 in. side Fixed heads: blade holder Ø220 + Ø350 mm HSK63F Table: 7 bar auto Belt: chip evacuation Control: Multilingual PC + Masterwindows software, mobile console, portable remote control Safety: CE Dimensions: 6800 x 2450 x 2450 mm Weight: 4300 kg Available from the beginning of November. Auction-ID: A1-50215-15

Bystronic BySprint Fiber 4020 - Laser Cutting Machine - Bystronic ByVision CNC control - 15" TFT-LCD control panel - Operating hours: 25076 h - Cutting hours: 10728 h - Year of construction 2015 Technical data - Laser Source: Fiber Laser - Laser power: 6000 W - Working range: 4064 × 2024 × 70 mm - X-travel: approx. 4000 mm - Y-travel: approx. 2000 mm - Z-range: 70 mm - Maximum sheet thickness steel: 25 mm - Maximum sheet thickness stainless steel: 30 mm - Maximum sheet thickness aluminium: 30 mm - Maximum sheet thickness copper: 12 mm - Maximum sheet thickness brass: 12 mm - Electrical connected load: 22.7 kVA - Machine dimensions WxHxD: 13700 x 2565 x 6670 mm - Machine weight: approx. 15000 kg

sliding headstock CNC lathe, year 2015, 2368 operating hours, CNC 31i-MODELB. Used machine. More info & price on IndustrialBuyer.

turning diameter: max. 356 mm turning length: 1.255 mm control: M 730 BM MAPPS IV greates pass round over bed: 920 mm Swing dia. over traverse guideway: 742 mm distance between spindles: 1.511 mm Main spindle:: turning speed range - main spindle: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A2-8 spindle bore: 91 mm max. bar capacity: 80 mm Subspindel:: Spindle speed range subspindle: 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle bore: 43 mm axis stroke:: x-travel: 260 mm z-travel: 1.345 mm Y - Axis: +/-50 mm rapid traverse ( X / Y / Z ): 30 / 10 / 30 m/min turret:: number of toolpositions: 12 pos. Schank height for square tool: 25 mm Drill shank diameter: 50 mm turret change time: 0,27 sec. Driven Tool Positions:: Spindle speed - driven tools: max. 6.000 min -1 power capacity - driven tools: 5,5 / 3,7 kW total power requirement: 50 kVA  ...

turning speeds: 0 - 8.000 U/min hollow: 20 mm control: FANUC - 31i B Turning Automatic Lathe - swiss lathe | ML20C5 - 2016 equipped with chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ML20C5 | ML-20C5 | ML-20 C5 | ML 20 C5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 44 t, 1600 mm, 1530 mm

Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Pressing force: 44T Bending Length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS+ angle measuring system Back gauge: 5 axis controlled X-R-Z1-Z2-Dx axles Bending tool holder: Type manual WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Double foot pedal for opening and closing the Y-axis 1x set of bending tools incl. Ibjbmlszymb Seurhasb 36 months warranty after installation Delivery excl.; available immediately Viewing under power possible at any time by appointment!

Key data: 44 t, 1600 mm, 1530 mm

Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Pressing force: 44T Bending Length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS+ angle measuring system Back gauge: 5 axis controlled X-R-Z1-Z2-Dx axles Bending tool holder: Type manual WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Double foot pedal for opening and closing the Y-axis 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; available immediately Viewing under power possible at any time by appointment!

The machine is in good technical condition; it can be tested by prior arrangement.

The machine is in good technical condition; testing is possible by prior arrangement. Sinumerik 840 SL control system, turret with live tooling, chip conveyor.

The machine is in good technical condition; it can be tested by prior arrangement.

The machine is equipped with a tailstock as well as three-jaw chuck, jaw width: 380 mm, furthermore a large batch of tool holders, clamping jaws and another jaw chuck, incl. Chip conveyor. Additional technical specifications: • frequency: 50/60 Hz • nominal voltage: 52 A

CNC Turning and Milling Center DMG CTX GAMMA 2000 TC (spindle hours may increase slightly). The machine is equipped with an automatic steady rest from SMW AUTOBLOK, a three-jaw chuck (manufacturer SMW, diameter: 300 mm), additional clamping jaws, another jaw chuck, as well as a chip conveyor and coolant system. Transport warning: Caution: the machine can be transported on a truck up to 3000 mm wide. Additional technical specifications: • Spindle distance: 2260 mm • max. workpiece weight chuck parts/chuck weight: 250/150 kg • max. workpiece center of gravity from spindle flange: 250 mm • Travel path Z2: 1910 mm • Travel path Z3: 1910 mm • Steady rest clamping range DW: 45 - 310 mm • Steady rest width C: 145 mm • Spindle flange diameter: 220 H 5 mm • Front bearing diameter: 160 mm

The machine is equipped with a tailstock, a 12-station tool turret as well as a collet chuck, incl. chip conveyor

The machine is equipped with a tailstock, a three-jaw chuck, a chip conveyor, and a coolant system. Attention: spindle hours may increase slightly! Additional technical specifications: • Nominal voltage: 125 A • Spindle distance: 1020 mm • Max. workpiece weight chuck parts/chuck weight: 100 kg • Max. workpiece center of gravity from spindle flange: 120 mm • Travel X1: from -10 to 490 mm • Travel Y1: +-100 mm • Travel Z2: 600 mm • Travel Z3: 800 mm • Spindle flange diameter: 220 H 5 mm • Front bearing diameter: 160 mm • Slide rapid traverse speed Z-axis: 40 m/min • Path resolution Z-axis: 0,001 mmm • B-axis max. swivel speed: 70 rpm • Angular resolution: 0,001° • Quill force: 8 kN

The machine is equipped with a tailstock, a 12-station tool turret as well as a 3-jaw chuck, diameter: 250 mm, manufacturer KITAGAWA, incl. chip conveyor

The machine is equipped with a sub-spindle (equipped with a 3-jaw chuck SMW AUTOBLOK, diameter: 210 mm) as well as a 12-station tool turret, incl. driven tool stations, as well as an SMW AUTOBLOK 3-jaw chuck, diameter: 250 mm, plus chip conveyor, filter extraction, documentation and CDs. Additional technical specifications: • Bed inclination: 45° • Bed diameter: 700 mm • max. slide diameter V1 to V3: 500 mm • in the front workpiece diameter: 320 mm • centre length: 1450 mm • Travel Z3-axis: 1200 mm • Spindle height axis to floor: 1043 mm • Drawbar diameter: 81 mm • Front bearing diameter: 130 mm • Resolution axis C1: 0.001° • max. weight between centers: 500 kg • Distance between two spindle noses: 1495 mm • Z1 axis travel: 1200 mm • max. workpiece length: 1140 mm • max. workpiece diameter: 450 mm • Bar capacity of sub-spindle: 50 mm • Bore diameter o ...

The machine is equipped with a tailstock, revolving steady rest, a 14-position tool turret, incl. the tool holders visible in the photos in the turret, as well as a three-jaw chuck from the manufacturer SMW, diameter: 315 mm and incl. an additional steady rest as well as chip conveyor Additional technical specifications: • nominal current: 207 A • control voltage: 220 V

The machine is equipped with a tailstock and a 12-station tool turret, incl. the tool holders located in the changer, plus a 3-jaw chuck SMW AUTOBLOK, diameter: 300 mm, incl. chip conveyor and filter extraction system as well as documentation. Additional technical specifications: • frequency: 50/60 Hz • Diameter in the front bearing: 140 mm • Feed drive in X and Z-axis: 40 x 10 mm • Feed forces X/Z: 7.5 kN • Y-axis feed force: 7000 N • rapid traverse of C1-axis: 100 m/min • Position measuring system X/Y/Z: absolute rotating • Positioning uncertainty X: 0.008 mm • Positioning uncertainty Z: 0.010 mm • Working area axis distance: 1150 mm • Swivel range over X slide: 465 mm • Swivel range over bed: max. 680 mm

• nominal voltage: 80 A • spindle internal diameter: 85 mm • incl. chip conveyor

HARDINGE COBRA 42 ist eine CNC Drehmaschine für präzise, hochgenaue und zuverlässige Bearbeitung. Kapazitäten: Dreh-Ø über Bett 210 mm, Stangen-Ø 42 mm, Drehlänge/Z 355,6 mm, X 196,8 mm; Revolver 1×12, Camlock A2-5. Daten: 100–5000 t/min; Eilgang X=10 Z=16 m/min; Spindel 14 kW; 50 Hz 3×400 V; 24 kVA. Zubehör: 3-Backenfutter, Spannzangensatz, Stahlhalter. Für enge Toleranzen; Branchen: Automotive, Luftfahrt, Medizintechnik, Uhren, Maschinenbau. Technische Daten ohne Gewähr

Auction-ID: A7-50346-17

turning diameter: 376 mm turning length: 1245 mm control: FANUC i-Series turning diameter over bed: 376 mm x-travel: 230 mm z - travel: 1350 mm rapid travel x/y/z: 24/30 m/min main spindle speeds:: 2800 spindle motor: 35 / 26 kW max. torque on the spindle: 1613 Nm spindle passage: 102 mm total power requirement: 33,91 Kva weight of the machine ca.: 7 t dimensions of the machine ca.: 4,6 x 2,11 x 2,3 m Equipped with: - Fanuc i-Series CNC control - C-axis - 3-jaw chuck, 304 mm diameter - 12-station tool turret - Tailstock - Chip conveyor - CE Only 2,300 spindle hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 900 mm turning length: 1600 mm control: Fanuc 21iTB swing dia.: 1030 mm swing diameter over cross slide guide: 800 mm x-travel: 470 mm z-axis: 1650 mm spindle motor: 37/45 kW spindle turning speed range: 0 - 1800 U/min transmission ratio: 3 max. torque on the spindle: 5423 Nm Turret positions: 12 tailstock quill taper MT: MT6 tailstock quill diameter: 160 mm tailstock quill stroke: 150 mm chucking diameter: 530 mm total power requirement: 68,6 kVA weight of the machine ca.: 16,5 t dimensions of the machine ca.: 5,8 x 2,8 x 2,6 m - CNC Control Fanuc 21i-TB - LNS - C-axis 360° (0,001°) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 150 mm y-travel: +/- 30 mm z-travel: 620 mm chucking diameter: 165 mm Main Spindle:: spindle speed:: 6000 U/min spindle motor: 11 / 7,5 kW 2nd Spindle:: spindle turning speed range: 6000 U/min spindle motor: 11 / 7,5 kW Turret: 3x 15 Stck c-axis: 0,0001 ° y-axis: +/- 25 mm Control: 32i-TB Rapid Travel X / Y / Z-Achse: 24 / 12 / 40 m/min total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: 4120×2130×2815 m Horizontal lathe with main and counter spindles - Muratec Fanuc 32i-TB CNC control - Main and counter spindles -- 2x C-axis - Tool turret (3x) with Y-axis, -- 15 stations each (BMT 44) -- Powered tools on all stations, 8 kW, 6,000 rpm - Finished part gripper - Conveyor belt - Bar feeder interface - Coolant system, separate 200-litre tank - Cooling unit - High pressure to turrets 1–3 via M-function: 15 bar/40 l/min - Chip conveyor - T ...

turning diameter: 700 mm turning length: 3074 mm control: Mazatrol Matrix Smooth X : 91 mm : JIS A2-11 : 4000 1/min spindle motor: 30 / 22 kW Positioning speed: 12000 1/min milling spindle drive: 24 / 22 kW : 845 mm : 430 mm : 3126 mm : -30 / +210 ° Feeds (X,z,u,w-axis): 360 ° : HSK 100 : 36 Rapid Travel X / Y / Z-Achse: 50 / 50 / 40 m/min tailstock quill taper MT: 5 total power requirement: 77,73 kVA weight of the machine ca.: 25,5 t dimensions of the machine ca.: 7,3 x 3,4 x 2,95 m - Mazatrol Smooth X CNC control - 5-axis lathe - 36-position tool changer - IKZ / spindle cooling - Standard tool set (HSK T100) included - C-axis 0.001° - Tailstock - Milling head with milling spindle speed of 12,000 rpm -- B-axis 240° (-30° / +210°) - Smw 5.1 fixed tailstock (range 85–350 mm) - Kitagawa 21 3-jaw chuck - Renishaw RMP60 wireless probe - Engraving function, thread cutting, thread star ...

Turning diameter: 920 mm Turning length: 6000 mm Control: Mazatrol Matrix Spindle bore diameter: 170 mm Spindle nose: A2-11 spindle motor: 45/37 kW spindle turning speed range: 35 - 1600 U/min Spindle nose sub spindle: Turning speed sub spindle: 35 - 1600 U/min Movement X-axis: 1025 mm Movement Y-axis: 650 mm Movement Z-axis: 6170 mm w-axis: 4816 mm B-Axis travel: +210 / -30 ° C-Axis indexing: 0,0001 ° Tool Taper: BT 50 Tools in tool magazine: 80 Milling head speed: 10000 1/min milling drive: 37 kW total power requirement: 120 kVA dimensions of the machine ca.: 13267 x 3,300 x 3,200 mm Total weight, approx.: 44 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X=3700mm Y=1440mm, Z=150mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 8 supports with vacuum cups, pneumatic clamping 8 fences at the rear 8 fences in front 2 left fences and 2 right fences 6 rails for panel loading with pneumatic lifting Positioning the vacuum cups using a laser 1 connection for templates Vacuum pump with flow rate 100 m3/h Configuration V25,H8X/6Y, N1 X-Y 90?, F1-HSK63-15KW,F1-HSK63-9KW, C axis, W14 rear Main motor 15 kW, 1250-24000 rpm, air-cooled, 360? C-axis, C-axis interpolation axis, HSK 63 mounting C axis extension for flex-5 aggregate Main motor 9 kW, 1250-24000 rpm, air cooled, HSK 63 mounting Tool changer operating in X direction with 14 positions, rear mounted 2 x 4 vertical X drilling pins, 2 x 3 vertical Y drilling pins 14 horizontal drilling spindles 90? groove saw X-Y direction PC 85 power control software with: Woodwop: workshop-oriented program ...

CNC lathe Okuma LB 3000 EX II-MY C 450 Control: OSP-300LA Year of manufacture: 2018 Internal machine no. 77 Turning diameter over bed: 580 mm Turning diameter over slide: 470 mm X-axis travel: 260 mm Y-axis travel: 120 mm Travel Z-axis: 510 mm Travel C-axis: 360 mm Max. turning diameter: 340 mm Max turning length: 450 mm Main spindle speed: 45 - 5,000 rpm Recording: BMT Tool turret: V12 (driven) Equipment: - Chip conveyors - One touch IGF - Touchsetter - Main spindle Kitagawa B210 - Coolant system

Manufacturer: Buffalo Model: MICROCUT SAB LT-52 Year: 2019 Condition: Used Stock number: 6719 Control system: Siemens Maximum turning length: 460 mm Maximum turning diameter: 210 mm Maximum turning diameter over bed: 500 mm Maximum spindle speed: 5000 1/min Maximum turning diameter over support: 220 mm Maximum length of travel in the X-axis: 215 mm Maximum feed in the Z-axis: 520 mm Length: 3330 mm Width: 1821 mm Height: 1930 mm Weight: 3200 kg Equipment: Chuck Chip conveyor Lace

Working area: X 5200 x Y 1260 mm Heading of main spindle: X 5709 mm, Y 1650 mm 8 workpiece consoles Equipment: Drilling unit with 18 spindles, 12 vertical sp?ndles, 6 horizontal spindles (4 in direction X , 2 in direction Y ) Grooving saw Milling motor 11 kW, 20000 rpm max, HSK-F 63 take-up, liquid-cooled, 5-axis controlled Tool changer with 16 positions Laterally positioned changer with 8 positions PC control

Working field: axis x: 2310 mm, axis y: 628 mm, axis z: 90mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill chuck: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles in X, 12vertical spindles in X line Working air pressure: 6 bar Max consumption of compressed air: 0,75 NL/cycle Installed power: max 7.5 kW Capacity of vacuum tools: 40 m?/h CNC: screen: monochromatic 9? Floppy disk unit PLC for control of the machine cycle

Working field: axis x: 3200 mm, axis y: 944 mm, axis z: 110mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill holder: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 24 horizontal spindles in X, 10 vertical spindles in X line Working pressure air pressure: 6 bar Installed power: max 25 kW Capacity of vacuum tools: 40 m?/h CNC: screen: monochromatic 9? Floppy disk unit

Working area: X 5005 x Y 1520 mm x Z 200 mm Main spindle travel: X 5910 mm, Y 1815 mm, Z 655 mm. Travel speed: X 80 m/min, Y 80 m/min, Z 25 m/min 8 workpiece consoles with automatically positioning vacuum cups Equipment: Drilling unit with 19 spindles, 7 vertical spindles in X, 6 vertical spindles in Y, 2 double horizontal spindles in X, 1 double horizontal spindle in Y Slotting saw Milling motor 12 kW, 1000?24,000 rpm, HSK-F 63 mounting, liquid-cooled, 5-axis controlled Tool changer with 22 positions Vacuum pumps with 2 x 100 m?/h capacity PC control Masterwork software Integrated waste conveyor

Bridge type Capacity for all units: 3300 x 1100 mm (alternating: 2 x 1025 x 1100 mm) Capacity for routing with tooldiameter 25 mm: 1550 mm Workpiece thickness up to 300 mm (stroke Z-axis 600 mm) Speed in X and Y: 60 m/min, Z: 25 m/min, Vector: 85 m/min 6 Support rails with LED positioning indication Vacuum: 100/140 m3/h Controlls: Powercontrol PC85 Waste/chip removal belt in machine base Machine pneumatically prepared to take pneumatic clamps, 3 pcs clamps included Drilling unit V9/H4, 13 spindles, motor 2,2 kW Main spindle DRIVE5C+, 5-axis, 10 kW, HSKF63 taper, speed 1000 to 24000 r/min, tooldiameter up to 180 mm for routing, 350 mm for cutting 14-fold rotary toolchanger and pick-up place for a sawblade Woodwop software

Gantry-type, 3-axis CNC machining centre Working area (type 2132): approx. 3300 x 2100 mm Vacuum table with multiple switchable zones Input: AES lifting table for automatic sheet loading Output: conveyor belt with label printer (labels are printed and applied manually) Main spindle: HSD ES929, HSK-F63 mount, 7.5 kW (9 kW), speed up to 24,000 rpm, 800 Hz, 380 V Main spindle overhauled in 2023 Drilling unit with 16 spindles: 6 vertical spindles in X, 4 vertical spindles in Y, 2 double horizontal spindles in X, 1 double horizontal spindle in Y Slotting saw Tool changer with 12 positions Vacuum: Becker vacuum pumps, system approx. 500 m?/h Control: OSAI control system with AES ProcessController, operation via console with touchscreen and keyboard Operating hours: approx. 2,100 h (machine life), main spindle overhauled at approx. 1,360 h

4-axis machining center working area: X Y Z : 3060 x 1080 x 155 mm Movement speed X 100 m/min, Y 100 m/min, Z 30 m/min 14 vertical spindles 4 horizontal spindles in X direction 2 horizontal spindles in Y direction Grooving saw 0? - 90? toolchanger 7 positions toolchanger 10 positions Router 7,5 kW, ISO 30 , 1000 - 24000 r/min, c-axis lock milling aggregate available in option