mill cnc used for sale

Maho, 700C Control : Maho 432, Built in 1989, Adapter SK40, Tool changer Method : X-700, Y-450, Z-500, Quole The machine can no longer be viewed under power. Has lost parameters ! Would also sell spare parts, table, milling head, drives, control, ...

Nice machine, however, parts of the controls are missing. Mechanically very good condition Sell spare parts or complete machine ! Table, milling head, guides, spindles, measuring rulers, motors, E-parts, control panel, ... or to convert to a new control system !

Control : Micro-Haas VF2 X-1250mm, Y-508, Z-600, Spindle : SK40 , 10 - 7500 rpm , Feed rate : 0 - 4500mm/min, rapid traverse : 15m/min Table load : 1000kg Weight : 6to, L- 370cm, W330cm, H-290cm, No shift work !

Vertical machining center, very good condition, electrified to visit, with many accessories Control : Sinumerik 810D with Shopmill, Procedure: X-420mm, Y-330, Z-240, Table: 850x325mm Spindle: SK40, 0 - 5000 rpm, 100Nm Feed rate: up to 12000 mm/min ATC : 12 Pos. Dimensions: 230 x 240 x 245 cm , Weight : 2900kg incl. : 2 machine vices, 30 holders, 3D probe, tool cabinet with clamping tools, milling cutter,

Control Fanuc 0i-MF Speed [rpm] 10000 Travel X/Y/Z [mm] 1020/600/600 Tools & Tools. SK 40 Spindle: Belt spindle technology Speed 10,000 rpm Power 11 kW Torque 71 Nm Tool holder SK40 General: Tool magazine 24 stations Clamping surface 1,150 x 600 mm Table load (max.) 700 kg Rapid traverse in X/Y/Z 36/36/30 m/min Equipment/Accessories: Chip Management Chip Conveyor Coolant management IKZ system with filter and high pressure, 20 bar Electronic handwheel set-up Other equipment Rinsing gun, transformer

x-travel: 300 mm Y-travel: 220 mm z-travel: 400 mm Clamping surface: 620 x 390 mm Speed: 31 - 3150 rpm Feed range: 1 - 3600 mm/min Rapid traverse: 4000 m/min Spindle mount: SK 40 Swivel head +/-: 90° Quill stroke: 60 mm Total power requirement: 1.09 / 2.0 / 4.0 kW Machine weight approx.: 1.3 t Approx. space: 1.3 x 1.1 x 1.6 cm The machine comes from a training course and has been put into storage. It is possible that the z-axis is defective.

Manufacturer ZAYER Model TEBAS-5000 Year 2013 CNC HEIDENHAIN iTNC-530 HSCI Table Table Surface 5.200 x 2.200 mm. Max. weight allowed on table 25.000 kg. Max distance from 45º head nose to table in vertical position 1.410 mm. Max distance from 45º head nose to table in horizontal position 1.465 mm. Max distance from direct exit head nose to table in vertical position 1.420 mm. Travels and feeds Longitudinal Traverse (X Axis) 5.000 mm. Transversal Traverse (Y Axis) 3.750 mm. Vertical Traverse (Z Axis) 1.250 mm. Distance between columns 3.000 mm. Rapid Traverse 50.000 mm/min Max. Working Feed 30.000 mm/min Headstocks Universal Auto Indexing Head 45º 0.001º/0.001º Taper DIN 69871 AD 50 Spud ISO 7388-2 B 50 Spindle speed 6.000 rpm Speed ranges 3 Main spindle power 43 kW Direct output head reduction 1-2,29 INCLUDED Taper DIN 69871 AD 50 Spud ISO 7388-2 B 50 S ...

CNC control Hurco Win Max Travel x/y/z 1270 mm / 660 mm / 610 mm Max. spindle speed 12,000 rpm Working surface 1,500 x 600 mm T-slot (mm) 6 x 18 x 100 Max. table load 1,350 kg Tool changer 40 – speed Machine weight approx. 9 t Space requirement approx. 4.8 m / 4.5 m / 3 m

MCM Jetfive Drum Milling Machine :::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 16i - M - Head Type: Fourth and Fifth Axis Automatic Head Additional technical notes for the head: Continuously controlled head on both axes - Tool holder: HSK 63 Spindle power: 55Kw Spindle speed: 20000 Number of tools: 760 X axis stroke: 10000mm Y-axis stroke: 2000mm Z-axis stroke: 600+800mm Rapid feeds for linear axes X Y Z: 50m/min Pallet changer: yes Pallet size: 1100 x 10000mm Maximum load allowed: 2000Kg Round pallet: yes High refrigerant pressure: yes Pressure value: 65bar External tank system with filter: yes Cutter type: mobile column Chip conveyor: belt conveyor Presetting: yes Other technical data: Spindle torque 156 Nm Drum table with 4 faces rotating on a horizontal axis Machine equipment: Automatic tool check Workspace Came ...

Stock number: 3880 PROCESSING Manufacturer: Johnford , Type: VMC 824 Machine NO.: 49208455, Year of manufacture: 1992 Specifications: Table size 1100 x 400 mm Longitudinal movement (X) 900 mm Transverse movement (Y) 500 mm Vertical movement (Z) 570 mm Spindle cone BT 40 Spindle speeds 36-6000 rpm Spindle motor 7.5/5 Kw Tool changer 24 places Control Fanuc OM Fabr. Operating hours spindle 4412 hours Length: 3100 mm, Height: 2850 mm, Width: 2350 mm, Weight: 5000 kg

Description: Max cutting diameter: 386mm Max cutting length: 515mm Bar capacity: 52mm XYZ: 260 x 100 x 590mm Main spindle: 6000 rpm/7.5/11kw Milling: 10,000 rpm 12 turrets Milling holders Turning blocks Gantry Loader GX-05 AIV type Chip conveyor Includes shipping to any major seaport in the world. control: Mitsubishi M730UM with CELOS, Approx. Onsite Dimension. (l x w x h): 3,600 x 2,100 x 2,200 mm, weight approx.: 5,400 kg

Description: Max cutting diameter: 386mm Max cutting length: 515mm Bar capacity: 52mm Main spindle: 6000 rpm/7.5/11kw Milling: 10,000 rpm 12 turrets Milling holders Turning blocks Gantry Loader GX-05 AIV type Chip conveyor Includes shipping to any major seaport in the world. control: Mitsubishi M730UM with CELOS, Approx. Onsite Dimension. (l x w x h): 3,600 x 2,100 x 2,200 mm, weight approx.: 5,400 kg

BROTHER Machining Center Model TC-229 N (comparable to FANUC, MÜGA) YOC 06.1998 Condition: exceptionally good High-speed vertical machining center for Drilling-threading and light milling Table dimensions: 600 x 300 mm Longitudinal travel: 480 mm Transverse travel: 360 mm Vertical travel: 270 mm Spindle speed: 10 – 10,000 rpm. Spindle cone: BT 30 Tool changer: 14-fold Tool change time: 1.2 sec. Feeds: 30 m/min. Spindle power: 9.5 kW Weight: 1800 kg Control: BROTHER CNC-620 Accessories: coolant device; electr. Handwheel; Legs; 4-jaw chuck as assembled Price net plus VAT ex location plus loading costs of 1000€

Jarbe / Agursal X: 1500 - Y: 800 - Z: 500 mm Max longitudinal travel X-axe: 1500 mm Max cross-travel Y-axe: 800 mm Max travel Z-axe: 500 mm Power on spindle: 15 HP / 11 kW Type of millinghead: ISO 50 Spindlespeeds: 31 > 1400 rpm Table size: 2000 x 600 mm Digital screen: Heidenhain 3 axes Weight: 7 ton

FANUC ROBODRILL ALPHA D21 LiB5 CNC machining center manufactured in 2017 achieves outstanding efficiency and precision, even during the most demanding workpiece machining. The machine features an extremely stable design with a large working area, inside of which it incorporates, among others, a rotary table and an extremely powerful high-speed spindle. This is further complemented by the intuitive FANUC Series 31i-MODEL B5 CNC control, whose excellent optimisation and multitude of functions allow to maximise the efficiency of the machining process, while ensuring excellent results. To this date, the FANUC ROBODRILL CNC milling center has operated for a total of 1911 hours and has been used only for machining stainless steel. The total weight of the machine is 2200 kg. Technical specifications of the FANUC ROBODRILL ALPHA D21 LiB5 milling center - feeds in the X/Y/Z axis: 700/400/330  ...

Control Fanuc 31i-B5 Speed [rpm] 24000 Travel X/Y/Z [mm] 500/400/400 Tools & Tools. BT30 Spindle: Speed 24,000 rpm Power (max.) 26 kW Torque (max.) 35 Nm Tool holder BT 30 NC Swivel Rotary Table: Technology Swivel rotary table with torque drive and counter bearing Type Häberle DTTiB Workpiece clamping zero-point clamping system, Fabr. Long General: Tool magazine 21 + 240 stations Clamping surface rigid table 650 x 400 mm Table load (max.) 400 kg Rapid traverse in X/Y/Z 54 m/min Automation: Technology Robot cell with carousel memory for tools and Workpieces Robot 6-axis robot Fanuc M20i Carousel storage 240 stations for tool holders, 135 stations for Workpieces Equipment/Accessories: Coolant management IKZ system with paper belt filter and high pressure, 60 bar Chip Management Chip Conveyor Workpiece Measurement Probe, Renishaw OMP 40-2 Tool Measuremen ...

Year: 2012 - technically efficient, ready to work - after full service - spindle 7 kW - axis movement range: X – 3500 mm, Y – 400 mm, Z – 300 mm - pneumatic rotary table A: -90° / 0° / +90° - 4 pneumatic clamps - magazine for 7 tools (SK 30 holder) - automatic quick tool change system - cooling and lubrication installation - operator panel, Windows system with online access - protective cabin - weight 2850 kg, dimensions: 4500 x 2100 x 2100 mm

Vertical CNC Machining Center The Vector series is the compact, all-in-one machining solution, designed and pre-configured for complex manufacturing challenges. The machines are designed using state-of-the-art FEM analysis software. The production is carried out under strict quality control to guarantee flawless execution. Additional stability in the machine frame is provided by both the tried-and-tested Meehanite cast iron and the delta construction of the column. The consistently high-quality components guarantee smooth operation in multi-shift operation. - Condition: like new (exhibition machine) - Machine frame optimized by means of FEM analysis - Extra-wide Y-shaped column construction for high stability - Coolant through spindle (30 bar) for optimum machining quality - Designed for multi-shift operation - Variety of customization and automation options - 2 year warranty ...

Table-top CNC milling machine ADF 3040mini One-piece frame made of polymer concrete The design is a monobloc with a moving aluminum table. Working area with noise and dust protection • Processing zone X, Y, mm - 300400 • Z axis stroke, mm - 100 • Workpiece fixation – Mechanical • The material of the table covering is aluminum D16T • Feeder mechanisms – 1605-X, Y, 1204-Z • Positioning accuracy, mm – 0.05 • Spindle – 1.5 kW air cooling • Spindle revolutions, rpm - up to 24,000 • Collet type – ER 11 • DDCS V3.1 controller • Drive of linear movements - power stepper Nema23 motor • Power supply, V - 220 • Term of warranty service, month – 12 • Non-contact inductive sensors on all axes • Tool height sensor LED - illumination of the working area Tray for collecting shavings Built-in control cabinet Hermetic processing area  ...

The ADF 1320 Stone milling machine is designed for high-quality milling and engraving of stone and metal in 2D/3D planes. PROCESSING MATERIALS Stone (marble, granite, etc.), wood, composite materials, polystyrene, non-ferrous metal, plexiglass, model plastic, etc. APPLICATION Ritual services: Simple and complex reliefs with artistic carvings, bas-reliefs, sculptural compositions, memorials, etc. Interior decoration: Elements of fireplaces and billiard tables, stairs, plinths, parquet, etc. Exterior decoration: Figured moldings on windows and doors with carving through. Decorative elements for decorating wooden houses and baths. Board balusters for finishing verandas and gazebos, fences, etc. Exclusive wood and metal products: Frames for mirrors, panels, figures of people and animals, souvenir products, boxes, chess, backgammon, icons, writing sets, watche ...

CNC milling machine ADF 0230Pro is designed for high-speed cutting and milling of aluminum profiles and any other non-ferrous metals. All-welded frame of the machine, with vibro annealing Fully enclosed and protected working area, visual contact with the cutting area • Processing zone X, Y, mm - 3003200 • Z axis stroke, mm - 240 • Fixation of the workpiece – Pneumatic clamps – movable along the guides, 4 pcs. • Feed mechanisms - helical rack along the X and Y axis mod. 1.25, ball screw gear 2005 – Z • Drives of linear movements - Servo motor, 750 W • Positioning accuracy, mm – 0.05 • Spindle – 7.5-9 kW air cooling • Automatic tool change function, 6 tool holders - ISO30 • Professional control, NC Studio V15 (Lambda-4S control board, increased processing performance) • Planetary gearbox • Spindle revolutions, rpm - up to 24,000 • Collet  ...

CNC milling machine ADF 1630ATС is designed for high-speed curved cutting of materials made of wood and any wood derivatives, plastics and other polymers, plexiglass, composites and foam. The functionality of this machine allows you to process any materials up to and including non-ferrous metals. The automatic tool change function allows you to optimize working time in production by writing one control program for all operations of up to 6 tools. • Processing zone X, Y, mm - 16003050 • Travel of the Z axis, mm - 220 • Fixation of the workpiece – Vacuum clamping system of the workpiece • Vacuum pump - oil-free, 5.5 kW • Feed mechanisms - helical rack along the X and Y axis mod. 1.25, ball screw gear 2005 – Z • Drives of linear movements - Servo motor, 750 W • Positioning accuracy, mm – 0.05 • Spindle – 7.5-9 kW air cooling • Automatic tool replacemen ...

Probably built in 1992 Control Phillips 432 Spindle SK 40 Speed range 20-5000 1/min Travel X800mm Y500mm Z600mm 4-axis rotary table Coolant system IKZ and flushing from the outside Tool storage 30pcs Spindles horizontally and vertically, automatic change by means of M function chip conveyor Machine is fully functional

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110° C nx 360° Spindle speed – 28000 rpm Taper – HSK 63 Tool changer – 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for parts set up, laser for measuring tools Made in Germany

Dmg DMU 125P Hidyn Machining Center ::SPECIFICATIONS::: CNC Model: Heidenhain Tool holder: SK 40 Spindle speed: 20000 Number of tools: 60 X-axis stroke: 1250mm Y-axis travel: 880mm Z-axis stroke: 800mm Rotary Table: Yes Rotary Table Type: Continuous Table size: 1250 x 1000mm Allowable load on the table: 1500Kg Fourth and fifth axis head: yes Fourth and fifth axis head type: continuous High refrigerant pressure: yes External tank system with filter: yes Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Weight: 18500Kg

The machine is in good technical condition, can be tested under power. Equipped with a rotary table and has a tilting vertical spindle, it can be used both as a horizontal and vertical milling machine. The machine is not equipped with tool changer. A GO was carried out 2 years ago during which all bearings were replaced. The machine is fully functional

The machine is in good technical condition, can be tested under power. X,Y,Z axes: 6000x3000x3000 mm The 6 OS is designed to machine light materials: plastic wood, resins, MDF boards, polystyrene and is capable of milling a complete model of a passenger car. The clamping cone ISO 40 Spindle speed: 12 000 rpm. - Electric spindle from Omlat - spare spindle available Control system: Hedenhain TNC 530 - rebuilt in 2007 Pinola: 60mm stroke

The machine is in good technical condition, it can be tested under current. Milling head O - B axis positioning, HV spindle rotation • Chain magazine of tools 40 positions • Pallet continuously rotating table, 2 pcs of stackers with pallet • Cabin cover of the machine with water management and chip conveyors. • Machine control system: Heidenhain TNC 530 • Axis and spindle drives Siemens Simodrive 611 D

The ADF 0808 METAL milling machine is designed for processing steel, cast iron, and non-ferrous metals. The basis of the machine is a massive and rigid frame weighing 2.8 tons. The vibration-absorbing properties of the structure, its increased wear resistance and resistance to plastic deformation allow processing of ferrous metals in long-term modes. The guides and SHP have corrugation protection, which allows you to effectively protect the parts of the machine from dust, chips and coolant. The high precision of the machine is ensured not only by milling the places and the plane of the table, but also by their grinding. The design of the machine with a moving table has a positive effect on the processing modes and quality of the products. ADF 0808 has an automatic system of lubrication of seams and guides, which simplifies the maintenance of the machine. At the request of the cu ...

Type: FT45TG Year of manufacture: 06/1998 Number of axes: 5 Table size: 1600x1250 mm Allowable table weight: 4000 kg X axis travel: 2500 mm Y axis travel: 1500 mm Z axis travel: 1200 mm W axis travel: 800 mm B-axis movement: 360000°. Work feed speed: 0 to 2000 mm/mn Rapid feed speed: 10000 mm/mn B axis work feed speed: 0.1 to 1 rpm Spindle nose: ISO 50 Gearbox speed: 2 ranges 500/ 2000 rpm - 749/3000 rpm Spindle motor power: 24 kW Fixed 2-spindle horizontal/vertical milling head Housing Full documentation Very good condition

Vertical Machining Center Specifications: Working range X/Y/Z axes: 1020 / 620 / 610 mm Speed range - vertical spindle infinitely adjustable: 1 - 8000 1/min Distance spindle / table: min. / max. 80 / 690 mm Distance between spindle centre and machine stand: 655 mm Feed X/Y/Z axes: 15 m/min Rapid traverse X/Y/Z axes: 30 / 30 / 24 m/min Milling spindle: Tool holder: SK 40 Router table: Clamping surface: 1200 x 610 mm Clamping grooves: 6 Groove width: 18 mm Groove spacing: 100 mm Max. load: 850 kg Tool changer: Tool positions: 32 Max. tool weight: 7 kg Max. tool diameter: 75 mm Max. tool diameter with free spaces: 125 mm Main drive: AC motor Power at 100% ED: 10 kW Power at 40% ED: 14 kW Weight, approx.: 6800 kg Equipment: - Railway control Heidenhain iTNC 530 - Feed drives: Brushless three-phase servo motors (digital) for each axis - Tool changer

Specifications: Travel X/Y/Z: 800 mm Max. workpiece width: 1130 / D900 mm Ma. workpiece height: 1350 mm Position spreading width Ps: 0.004 mm Position uncertainty P: 0.006 mm Machine Table: Length x width, clamping surface: 630 x 630 mm Max. load: 1200 kg Dimensions of spindle center over table: 150 mm Dimensions of spindle nose in front of the centre of the table: 100 mm 0° and 180°: 100 mm 90° and 270°: 100 mm Center mount: 50 mm Spindle / Main Drive: Tool holder milling spindle: SK 50 Milling spindle speed: 8000 1/min Speed range: 20 - 8000 1/min NC rotary table: 360 x 0.001 degrees Equipment: - Siemens 840D control system - Number of tool positions: 240 - Number of pallets: 6 - 2 set-up stations integrated in Fastems system - Tool life monitoring - Feed force monitoring - Torque monitoring - Ringler chip vacuum cleaner -Conveyor - Pallet storage : F ...

Specifications: Travel X/Y/Z: 1000 / 1150 / 1000 mm Max. workpiece width: 1320 / D1000 mm Max. workpiece height: 1580 mm Position spreading width Ps: 0.004 mm Position uncertainty P: 0.006 mm Machine Table: Length x width, clamping surface: 800 x 800 mm Max. load: 1500 kg Dimensions of spindle center over table: 150 mm Dimensions of spindle nose in front of the centre of the table: 100 mm 0° and 180°: 100 mm 90° and 270°: 100 mm Center mount: 50 mm Spindle / Main Drive: Tool holder milling spindle: SK 50 Milling spindle speed: 8000 1/min Speed range: 20 - 8000 1/min NC rotary table: 360 x 0.001 degrees Equipment: - Siemens 840 D control system - Number of tool positions 240 - Number of pallets 6 - 2 set-up stations integrated in Fastems system - Pallet storage: Fastems storage type - Tool life monitoring - Feed force monitoring - Torque monitoring -Conve ...

Stock number: 3885 PROCESSING Manufacturer: HERMLE, Type: C800 V Machine NO.: 14187, Year of manufacture: 2000 Specifications: Table size 1000 x 560 mm Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Infinitely variable spindle speeds 10,000 rpm Spindle motor 25/16.8 Kw Total power 43 KVA Tool changer 30 places Feed rate 1-2000/30000 mm/min Rapid traverse 35 m/min Control Heidenhain TNC 430 Fabr. Operating hours spindle 9318 hours Accessories: Chip conveying. Touch Probe Renishaw Cooling by spindle Spindle Cooling Miscellaneous accessories. Operating instructions Delivery time: August 2024 Length: 2700 mm, Height: 2930 mm, Width: 2210 mm, Weight: 7000 kg

Stock number: 3886 PROCESSING Manufacturer: HERMLE, Type: C800 V Machine NO.: 15521, Year of manufacture: 2002 Specifications: Table size 1000 x 560 mm Large table load 1500 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Infinitely variable spindle speeds 10000 rpm Spindle motor 25/16.8 Kw Total power 43 KVA Tool changer 30 places Feed rate 1-2000/30,000 mm/min Rapid traverse 35 m/min Control Heidenhain TNC 530 Fabr. Operating hours spindle 10220 hours Accessories: Chip conveying. Cooling water system. Probe Renishaw OMP 60 Cooling by spindle Spindle Cooling Machines vice. Miscellaneous accessories. Operating instructions Delivery time: August 2024 Length: 2700 mm, Height: 2930 mm, Width: 2210 mm, Weig ...

Stock number: 3890 PROCESSING Manufacturer: HERMLE , Type: C600 U - 5 axis Machine NO.: 17811, Year of manufacture: 2006 Specifications: Large table load 300 kg Longitudinal movement (X) 600 mm Transverse movement (Y) 450 mm Vertical movement (Z) 450 mm Spindle speeds 10,000 rpm Spindle motor 25/16.8 Kw Total power 42 KVA A-Ash +/- 115 degree C: Ash 360 degree Control Heidenhain 530 Fabr. Controlled in axes 5 Operating hours spindle 4567 hours Power on 16810 hours CNC turntable. 280 Chip conveying. Touch Probe Renishaw Cooling by spindle Machines vice. Miscellaneous accessories. Operating instructions Delivery time: August 2024 Length: 2400 mm, Height: 2400 mm, Width: 2500 mm, Weight: 6800 kg

Stock number: 3891 PROCESSING Manufacturer: HERMLE, Type: B300 U 5 axis Machine NO.: 19368, Year of manufacture: 2008 Specifications: Large table load 250 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Spindle speeds 15000 rpm Spindle motor 15/10 Kw Total power 41 KVA A-Ash +/- 110 degree C: Ash 0.001 degree Tool changer 30 places Rapid traverse 30 m/min Control Heidenhain TNC 530 Fabr. Controlled in axes 5 Operating hours spindle 7294 hours Accessories: Cooling by spindle CNC turntable. 280 Chip conveying. Touch Probe Renishaw Cooling by spindle Machines vice. Miscellaneous accessories. Operating instructions Delivery time: August 2024 Length: 2700 mm, Height: 2900 mm, Width: 3340, Weight: 8500 kg

Manufacturer NICOLÁS CORREA Model FP50/80 New in Year 2010 CNC HEIDENHAIN iTNC-530 5 ejes Table Surface 8.500 x 2.500 mm Max weight allowed on table 35.000 kg. Travels (X/Y/Z) 8.000/3.800/1.250 mm Distance between columns 3.100 mm Max distance table to under bridge 2.100 mm Min/max distance table to spindle 500-1.750 mm Rapid feed (X Axis) 10.000 mm/min Rapid feed (Y,Z Axis) 12.000 mm/min Max. Working Feed 7.000 mm/min Automatic head C5 E INCLUDED Number of continuous axis 2 B-Axis head swivel ± 190º C Axis head rotation ± 360º Spindle taper ISO 50 Spindle speed 4.000 r.p.m. Spindle motor 37 Kw Spindle Torque 718 Nm Speed Range 2 Automatic tool changer INCLUDED ATC positions 30 Portable Handwheel INCLUDED Thermal growth compensation system INCLUDED Machine dimensions 19.370 x 5.850 x 5.970 mm. Machine Weight 93.000 g.

HAAS VF-4 CNC vertical machining center built in 2022 in the USA, is the perfect choice for any manufacturing facility. The machine, which combines functionality, productivity and precision, achieves excellent machining results under even the heaviest loads. This is all due to its extremely stable construction with a large work area, which includes a high-speed spindle, a rotary table and a set of probes for tool measurement and workpiece setting. In addition, in order to fully utilise the machine’s potential and machining capabilities, the installed HAAS CNC controller has been retrofitted with a faster processor and many additional functions. The offered HAAS VF 4 CNC machining center has worked a small amount of time so far and is in perfect condition. The total weight of the machine is 6033 kg. Technical specifications of the HAAS VF-4 CNC milling machine - feeds in the X/Y/ ...

AFM DEFUM BACA R 1000 CNC vertical machining center produced in 2016 in Poland is used for precision workpiece machining. Wide machining capabilities, high productivity and an extremely stable design with reliable components make the machine ideal for both series and unit production. In order to achieve the highest precision in the machining process, the spindle unit uses high-accuracy bearings and backlash-free reciprocating screw gears for the X,Y,Z axis feeds. Both spindle rotational speed and work feeds are programmed and controlled steplessly in the perfectly optimised SIEMENS CNC controller. In addition, the controller has many useful functions that maximise machining productivity and allow the full potential of the BACA R1000 CNC machining center to be exploited. The BACA R 1000 milling center also has a wide range of equipment, including a 20-position drum magazine with too ...

Description: Operating voltage: 380 V Connection: 3.7 kW Frequency: 50 Hz Rated current: 8.3 A Control: HEIDENHAIN TNC 135 Tool holder: SK 40 Table dimensions: 700 x 270 mm With 6 grooves and a machine vice from the manufacturer RÖHM Jaw width: 110 mm Travel distances: X: 400 mm Y: 375 mm Z: 250 mm Work spindle speed: 30 - 3150 rpm Feed rates in the X and Z axes: 5 - 1000 mm/min In the Y axis: 5 - 670 mm/min Rapid traverse in the X and Z axes: 2.4 m/min In the Y axis: 1.6 m/min Approx. Onsite Dimension. (l x w x h): 1,860 x 1,800 x 1,750 mm, weight approx.: 1,200 kg

Description: 1 used CNC turning and milling center Make: Gildemeister, model: CTX 420 V 3 with Heidenhain 4290 iT, built in 2004, turning diameter 565 mm Turning length 625 mm X-travel 260 mm Speed ​​range - main spindle 25 - 5000 rpm Drive power - main spindle 25 kW max. torque 270 Nm Spindle nose  ,170h5 Bar diameter 65 mm C-axis 0.001° turret stations 12 pos. Tool holder VDI 40 Powered tool stations 12 pos. Speed ​​driven tools 4500 rpm Drive power for powered tools 12 kW Tailstock holder MK 4, Rapid traverse X / Z 60 / 45 m/min Space requirement approx. with bar loader 7495 x 2484 x 1885 mm Accesories: Bar loader 3200 mm Iemca Master 880 MP-E chip conveyor Parts catcher Conveyor belt Measuring arm C axis driven tools collet chuck Tool package documentation data backup very well maintained machine control: Heidenhain 4290 iT, Approx. Onsite Dimension. (l x w x h): 7,500 x ...

Description: tool holders for CNC milling machine SK50 36 pieces weight approx.: 80 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 300 mm

WE OFFER AN EXCELLENT STAMA , JUST PERFECT CONDITION WITH TOOLS STAMA TECHNICAL DETAILS MACHINE DATA Machine type: Machining center Manufacturer: Stama Model: MC 526 Compact Machine number: KMM 526 1508 Year of construction: 2005 Condition: used Functionality: fully functional TECHNICAL DETAILS Travel distance X-axis: 1,000 mm Travel distance Y-axis: 400 mm Travel distance Z-axis: 360 mm Rapid traverse X-axis: 45 mm/min Rapid traverse Y-axis: 45 mm/min Rapid traverse Z-axis: 45 mm/min Feed rate X-axis: 10,000 mm/min Feed rate Y-axis: 10,000 mm/min Feed rate Z-axis: 10,000 mm/min Torque: 60 Nm DESCRIPTION TECHNICAL DETAILS Travel x: 1000 mm Travel y: 400 mm Travel z: 360 mm Control: Fanuc 18i-MB5 Projection: 350 mm Work ...

Year of construction 1990 completely original Y axis 2000 ( vertical ) X axis 4500 ( translating table ) Z axis 800 ( RAM ) W axis 1500 ( upright ) Table 1200x4500 n10 slots of 22 Semi-automatic bidirectional one-degree indexed head Universal manual head Possibility of working without heads thanks to 2 vertical-horizontal cones ECS2300 control

Lagun GCM 8 CNC milling machine is in good technical condition. Heidenhain iTNC 530 control system. Can be seen by appointment. Number of hours 15733 hours Clamping surface of the table: 9500x1100 mm Longitudinal movement of the table - x-axis: 8000 mm Transverse movement of the table - z axis: 2000 mm Vertical table movement - y axis: 1200 mm Spindle taper: ISO 50 Spindle speed: 3000 rpm Max. workpiece weight: 6000 kg Spindle diameter: 85 mm

DMG DMU 75 monoBLOCK universal machining centre (5-axis): Year of construction 2015 Travel 750 mm x 650 mm x 560 mm Heidenhain TNC640 control system with DXF import option Tool magazine with 60 places Tool holder HSK-A 63 Spindle with 18,000 rpm Production package with scraper belt conveyor Coolant system 600 litres with IKZ 40Bar Blowing air through spindle center Blum Laser Tool Measurement Heidenhain Probe TS649 Oil and Emulsion Separation Plant Rinsing gun Operating mode 4 Zero-point clamping system from Lang Weight: approx. 9.5t Machine times (as of 04/2024): Machine on: 16.665h Spindle on: 3.386h

Hermle B300 Universal Machining Centre (5-axis): Year of construction 2012 Heidenhain iTNC530 control with DXF import option Tool magazine with 30 places Tool holder HSK-A 63 spindle with 15,000 rpm IKZ with 40Bar Blowing air through spindle center Blum Laser Tool Measurement Heidenhain Probe TS440 Oil and Emulsion Separation Plant Rinsing gun Zero-point clamping system: Partool Powergrip 160 (4-fold) Weight: approx. 7.5t Machine times (as of 04/2024): Machine on: 20.272h Spindle on: 6.618h

AJAX Premier 1500 CNC Milling Machine Fagor 8050M control Table size 1472mm x 280mm Spindle taper 40 ISO Speeds 50-3750 rpm XYZ travels 820mm/455mm/450mm Spindle motor 3.7kW C/W Interlock guards Auto lubrication Power drawbar Coolant. RS232 Interface Excellent condition

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...