milk used for sale

Milk Pasteurisation Set With Seital Separator 2000-3000[tel:2000-3000] L/h Description This Combined GEA VT 10 pasteuriser with Seital Cream Separator was used on Cheese and Fresh milk products. This is ideal for a small/medium sized dairy wanting to move away from manual cleaning separators and Bach Pasteurization process gaining time, efficiency and product quality . Having a cream separator opens new markets for the dairy such as butter, cream, clotted cream, skimmed milk and zero fat milk products are some of the opportunities. Pasteuriser Make : GEA Model : VT 10 Year of Manufacture : 2005 S/N : 169/15597[tel:169/15597] Temperatures: Shown in Chart Hot Water inlet PHE Balance Tank Temperature Valve regulation Diver Valve for non pasteurised product Chart Recorder Product pumps Water Pump Stainless steel skid mounted for quick installation Con ...

Used milk powder plant made by FAM with Niro atomizer spray dryer. The powder plant consists of: 2-stage falling film evaporator type M-1 /A/: Technical data: 1. Raw material – skimmed milk - Dry matter content 9% - Temperature 5 °C - Feed stream 1,250 kg/h - Water evaporation capacity 1,000 kg/h 2. Product – condensed milk - Dry matter content 45% - Feed stream 250 kg/h - Temperature 45°C Spray dryer type Niro Atomizer R1 /A/: Technical data: 1. Raw material – skimmed milk - Feed stream 250 kg/h - Dry matter content 45-48% - Temperature 45 °C 2. Product – milk powder - Feed stream 100 kg/h - Water content 4% 3. Heating medium – saturated steam - Steam pressure at the air heater 1 MPa - Consumption 450 kg/h 4. Installed power 31 kW.

pasteurizer for cream efficiency: 7500 l/h GEA plate heat exchanger valves and pumps : ALva Laval flow meters -Endress + Hauser Offer details and photos will be sent to the email.

Seital SE15X Milk Separator Capacity 3.000 lt/h Comes with tools kit and instructions book

Seital SE20X Milk & Whey Separator Capacity 5.000 lt/h Comes with tools kit and instructions book

x-travel: 640 mm y-travel: 200 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Milko Type: 12 Table length: 1.000 mm Table width: 220 mm X: 640 mm Y: 200 mm Z: 400 mm Spindle taper: ISO 40 Maximum speed: 1.700 RPM Digital readout: Fagor Automatic feeding on X Machine is equipped with Huron head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SEITAL SE15 X MILK & WHEY SEPARATOR APPLICATION: CREAM SEPARATOR CAPACITY: 3.200 LT/H FOR MILK SKIMMING 4.500 LT/H FOR WHEY SKIMMING MACHINE COMES WITH TOOLS AND INSTRUCTIONS BOOK.

SEITAL SE30 MILK & WHEY SEPARATOR APPLICATION: CREAM SEPARATION CAPACITY: 7.000 LT/H FOR MILK SKIMMING 10.000 LT/H FOR WHEY SKIMMING MACHINE COMES WITH TOOLS AND INSTRUCTIONS BOOK

FBF Homogeniser 12,000 L/h 180 bar Make : FBF Model :075 Capacity : 12,000 L/H Bar Pressure : 180 bar Motor :76.5 kw Y.o.m : 2008 Weight : 2850 kg Condition : very good condition

WESTFALIA MSB 60-01-076 MILK SEPARATOR CENTRIFUGE USED FOR MILK SKIMMING, WHEY SKIMMING, CREAM SEPARATION, FAT SEPARATION FEED CAPACITY: 7.000 LT/H MACHINE COMES WITH TOOLS KIT AND SOME SPARE PARTS INSTRUCTIONS BOOKS ARE AVAILABLE 2 PCS AVAILABLE IN STOCK !

Pasteuriser for Milk 12,000 L/h Make : Fisher Model: E43 CFG Y.o.m : 2009 Capacity : 12,000 Litres Outlets : Separator & Homogeniser Thermal Circle : 4-45-65-75-4 Skid Mounted Condition : Very well maintained

Used manual batch ultrafiltration line for cottage cheese made by Agros Milko-Polska. Capacity: 2.500 kg of finished product in 8 hours, concentrated to 72% dry matter. New: 1996

3,800 liter rinsing milk tank/storage tank made of V2A Characteristics: volume 3800 L material V2A (AISI 304) 1.4301 Total height 2400 mm Cylinder height 1100 mm inner diameter 1850 mm Outside surface marbled Surface inside 2B=IIIC ground Design Vertical Number of feet 3 Description: MJ UNI-HIGH Topsoil: Flat floor with 3% slope threaded connector CIP ball Manhole Ø 540 mm vent nozzle Tank cylinder: 2 x Step Arches 2 x Disc Valve Underbody: Cone bottom drawn from outside to inside Residual Drain Pipe 3 solid feet

Fresh Milk Pasteurisation & Bottling Line General Overview: Complete fresh milk processing and bottling line, designed for small to medium-scale dairy production. The line covers the full process from separation and pasteurisation to homogenisation, filling, and final packaging of 1L PET bottles. All components are industrial-grade and suitable for continuous operation. Process Flow: - Milk separation - Pasteurisation (flash system) - Homogenisation - Buffering / storage - Bottle handling and filling - Sealing, labelling, coding, and packaging Main Components & Technical Specifications: - Milk Cream Separator - Make: Seital - Model: SE13X - Capacity: 2,500 L/h - Year of Make: 1993 - Plate Heat Exchanger – Flash Pasteuriser - Make: KMA - Model: K21-FS/4273 - Capacity: 2,500 L/h (heating from 8°C to 75°C) - Year of Make: 1998 - Homogenizer  ...

This Sterile Milk Tank has a Capacity of 16,700 Litres, it does not include the valve cluster and PLC program. There are a few valves available with the tank but these would need to be reconnected to a valve cluster program. This tank was connected to a central control room . The condition is good and there has not been any damages . Aseptic tanks are used for the process of Milk, Juice and other liquids required aseptic pasteurisation prior to the filling machines., The APV Aseptic Tank is a type of equipment designed for the storage and processing of liquids, particularly in industries such as food and beverage, pharmaceuticals, and biotechnology. Here are some key features of the APV Aseptic Tank:, - Sterile Environment: The APV aseptic tank maintains an environment that is free from contaminants, crucial for the integrity and safety of the stored product., - Construction Material: Ty ...

: gebraucht : 2003 : 4544 : prompt, Zwischenverkauf v : Spanien : 13800 € : 1 : 50 - 1700 (12) U/min : ISO 40 : 600/210/400 mm : 800 x 225 mm : 1500 mm : 1350 mm : 1850 mm : 950 kg : 1,5 kW with 3-axis digital display Fabr.Fagor Cooling equipment Machine lamp Swivelling universal milling head (Huron design) Horizontal milling device with counter bearing Table enclosure automatic feeds in X and Y Machine feets User Manual and EG Confirmation english BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:https://www.hesse-maschinen.com/en/lp/used-m ...

: gebraucht : 2002 : 4543 : prompt, Zwischenverkauf v : Spanien : 11400 € : 1 : 50 - 1700 (12) U/min : ISO 40 : 600/210/400 mm : 800 x 225 mm : 1700 mm : 1500 mm : 1960 mm : 950 kg : 1,5 kW with 3-Axis Digital display Fabr. Time Technology Europe Swivelling universal milling head (Huron design) Horizontal milling device with counter bearing and 1 pc. long milling arbor Coolant device Machine light automatic feeds in X and Y Machine feet with vibration absorbers no User Manual DOES NOT COMPLY WITH GERMAN UVV &, AUSTRIAN AMVO BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PUR ...

Mechanical Liguid Flowmeter

Stainless steel container with manhole 500 litres capacity Derivative: NW 50 Dimensions in cm: 120 height x 93 length x 74 width

Passavant lime milk line second-hand Year of construction: 1988 240 l

Tank / plant: Used lime milk Manufacturer: Passavant Material: Steel Size: located 1.77 m Height/length: 1.00 m Volume: 240 l

Ladies and gentlemen, we are happy to offer you milk powder in different categories partially durable up to 48 months. Please send us your request. We will be happy to answer your request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until f ...

: Plant used lime milk Manufacturer: Passavant Material: Steel Size: 3.80 m Height: 1.20 m Volume: 1.6 m³ Other: with agitator and Revi

Used pump for milk, made by HPM, model H 55 P. New 2002.

ALFA-LAVAL DD500LC high-vacuum deearator for viscous products. Capacity up to 6000 lt/hr. Equipped with internal condensor and mechanical level controller.

Vacuum deaerator that removes dissolved or entrained air, prevents oxidation of product and eliminates color and flavor changes. Can be used for liquid products like milkproducts, fruit juices, soft drinks, sauces and so on. Including: Vacuum pump Sihi, (type: LEMA50), product discharge pump, APV WI + 55/35-220 190. Trimod Besta level sensor , interconnecting piping. Including control cabinet with Siemens S5 plc and HMI. HMI programm is running, PLC programm fails. YOM 1997, excellent condition.

Milk pipe fittings, milk pipe nuts, stainless steel fittings -Size: DN 40 -Nuts: 15 -Screw connection: 30 Price: complete -Weight: 14 kg

Milk pipe fittings, milk pipe nuts, stainless steel fittings -9x Size: DN 65 -9x Size: DN 80 -5x Size: DN 100 -Screw connection: 23 Price: complete -Weight: 12 kg

Offered for sale is a Risto fresh milk vending machine. Measuring medium: fresh milk 4°C to 6°C, calibration: milk with 3.5% fat, ambient temperature: -25°C to +55°C, accuracy: 0.5%, flow range: 0.7l/min to 3.5l/min, normal flow rate: 3.4l/min, minimum measured quantity: 200ml. An on-site inspection is possible.

Manufacturer: ETSCHEID Content: 2000 l Equipped with agitator With integrated cleaning unit (CIP) Including cooling unit very good condition, fully functional

Two used GEA MIone Milking robot with equipments More details contact with us

This is a LITTLE GEM glass bottle filler for 1 Pint milk bottles round format. The machine cuts and applies with heat sealing the aluminium cap that is done via a fords cutter and capper. This machine can do 1pint and 2 pints. The machine has been running until 2025 and can be sold either as is working condition or fully refurbished . The machine is driven by 1 single motor that is located at the bottom of the machine turning two gears one opposite to the other making this a very robust and easy to maintain system., Capacity: 2000 bottles per hour , Aluminium Cutting: Fords systems , Format: 1 Pint Milk Bottles , Sealing Device: Included , Construction: Fully Stainless steel on product connection Parts , Filling Type: Mechanical valves that the bottles lifts the rubbers up and the milk flows through, one the mechanical vacuum is activated this helps to avoid over, Collection Table: Inclu ...

The Fischer milk pasteuriser 5000 is an industrial-grade machine designed for pasteurizing milk on a large scale. Here are some details about such a pasteuriser:, - Capacity: The 5000 typically indicates that this pasteuriser can handle up to 5000 litres of milk per batch, making it suitable for large dairy processing operations., - Functionality: The pasteuriser is designed to heat milk to a specific temperature, holding it there for a required amount of time to eliminate harmful bacteria and pathogens while preserving the milks quality and nutritional value., - Construction: Fischer machines are commonly made from stainless steel, ensuring hygiene and durability. The materials used are designed to withstand high temperatures and pressures encountered during the pasteurization process., - Design: It often features an insulated design for energy efficiency and may include a user-friendly ...

2 identical tanks with a capacity of 25000 l each, on 4 feet, Agitator, CIP connector Diameter 2800 mm Height 5600 mm formerly used for baby milk production Price per piece

Preformed Bottle Filling, Capping, Labelling and Packing Line for 2-litre plastic containers (jugs/bottles) for fresh milk with screw cap closure. The line is equipped with integrated control systems and is suitable for hygienic operation., Scope of Supply:, 1. Filling and Capping Machine, - Integrated gravity filling and screw capping system., - Designed for CIP (Clean-in-Place) cleaning., - Fully enclosed construction with access doors., - Equipped with sterile air filtration system., - 32 filling valves and 10 capping heads., - Touchscreen operator control panel., - Cap feeding bunker with conveyor to capping unit., Manufacturer: Weightpack, Model: WFT 32.10.160, Serial Number: WL239, Year: 2008, Capacity: up to 7.000 containers per hour, 2. Leakage Testing Unit (Squeeze Tester), Designed to detect container leakage after filling., Manufacturer: Teledyne TapTone, Serial Number: E05-00 ...

Various raw milk vessels and tanks connected to a valve cluster are available. 1) Volume: 25m³, Year of manufacture: 2014, Agitator: available. 2) 2x Ullmann tank storage system, Year of manufacture: 1993, Volume: 25500l, Max. operating temperature: 20°C, Operating pressure min./max.: -0.4bar/0.4bar, Agitator: available. 3) Raw milk tank, Volume: 14000l, Agitator: available. 4) Raw milk tank valve cluster. Documentation available. An on-site inspection is possible.

Used Aseptic Fllling Line SIPA GEA for milk up to 48.000 bph GEA ASEPTIC BLOW FILL SYSTEM ABF 2.0 Fully aseptic blowing, filling and capping system featuring H2O2-based preforms sterilization. Line Overview and Capacity Built in 2018, this complete aseptic PET line is configured for 38 mm neck and processes milk in 235 ml bottles with plastic screw caps. The line is ready for operation and has approximately 900 operating hours. Designed for high throughput, the configuration supports production up to 48,000 bph under aseptic conditions. As a compact aseptic solution within a used milk bottling plant, it combines decontamination, blowing, filling, and capping in a controlled environment to protect product integrity. Category: Complete Bottling Line Product Types: Dairy Container Types: PET Fill type: Aseptic Neck type: 38 Formats: 250 ml Technical specs (data record): Year: 2018; Speed: 4 ...

The Westfalia MSD 60-06-076 milk clarifier is a type of centrifugal clarifier specifically designed for the dairy industry to separate solids, such as bacteria, somatic cells, and other impurities, from milk and cream. This process is essential in ensuring the quality and safety of dairy products., Key Features and Specifications:, - Centrifugal Separation: The clarifier operates using centrifugal force to separate lighter fractions (milk) from heavier fractions (solids)., - Capacity: The MSD 60-06-076 model is designed to process a significant volume of milk per hour, making it suitable for medium to large-scale dairy operations., - Efficiency: Designed to achieve high clarification efficiency, these units help in producing high-quality milk with reduced impurities., - Hygienic Design: Being in the food industry, these clarifiers are constructed with high hygiene standards in mind, usua ...

The Westfalia MSD 60-06-076 milk clarifier is a type of centrifugal clarifier specifically designed for the dairy industry to separate solids, such as bacteria, somatic cells, and other impurities, from milk and cream. This process is essential in ensuring the quality and safety of dairy products., Key Features and Specifications:, - Centrifugal Separation: The clarifier operates using centrifugal force to separate lighter fractions (milk) from heavier fractions (solids)., - Capacity: The MSD 60-06-076 model is designed to process a significant volume of milk per hour, making it suitable for medium to large-scale dairy operations., - Efficiency: Designed to achieve high clarification efficiency, these units help in producing high-quality milk with reduced impurities., - Hygienic Design: Being in the food industry, these clarifiers are constructed with high hygiene standards in mind, usua ...

Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-500 L , Capacity: 515 Litres , Coo ...

APS PHE BRAND NEW ASP PHE for Milk pasteurisation CH - UX 10.5 5000 Liters per hour || Never used | Year 2022 | Contact us for more information ARSOPI PHE For Milk 5000 L/H Condition : New IN STOCK, Usage: Milk Pasteuriser, Capacity: 5000 L/h

The HTST (High-Temperature Short-Time) pasteuriser from Dairy Machinery UK is designed to provide efficient pasteurization of liquid dairy products while preserving their quality and safety. Here are some key features:, - Process Efficiency: HTST pasteurisation involves heating the dairy product to a high temperature (typically around 72°C and other temperatures on request ) for a short time (15-30 seconds and other timings on request ), which kills harmful bacteria and extends shelf life., - Quality Preservation: This method retains the taste and nutritional value of the dairy products better than traditional pasteurization methods, minimizing the impact on flavor and color., - Automated Control: Many HTST systems come with automated controls that monitor temperatures and flow rates, ensuring consistent pasteurisation and reducing human error., - Compliance Standards: Designed to meet  ...

Silver King SK10MAJ Milk dispenser Refrigerated dispenser, designed for two bag-in-box containers of milk or beverage. Ideally suited for canteens, restaurants, coffee shops and self-service beverage stations. Model SK10MAJ Two-Dispenser Setup Stainless steel construction Refrigerated cabinet Built-in temperature gauge 115 V Auction-ID: A1-51065-44

Equipped with cooling motor; heat recovery ; Please note, disassemble yourself on location! Auction-ID: A1-47395-1032

Lely Astronaut A3 automatic milking robot, year 2007. Installation for automated milking of cattle, including a milking stall with gates, a robotic arm with 4 teat cups, a Lely touch control interface, electrical and electronic cabinets as well as various components of the milking system. The bundle also includes the associated equipment and accessories present during the inspection, including: Lely CRS+ control box with wiring; Extra terminal/screen; various enclosures, cables, hoses and associated components; Lely collar set for animal identification and control; weights for collars; Various accessories and associated elements visible in the photographs. Characteristics according to the manufacturer's plate: Type: 5.1003.0000-241 Serial number: 0003052342 Year: 2007 Weight: 1,560 kg Power supply: 3 × 380 V Frequency: 50/60 Hz Apparent power: 6,500 VA CE ma ...

Machine for preparing soft ice cream, ice cream, sorbet ice cream, yogurt ice cream and milkshakes. The machine has a swirl function. The Nissei Giant Combi NA3344 has a large production volume so that it is possible to make large quantities of ice cream in one go. This machine comes directly from the catering industry and has not been tested. So it is sold as-is. Viewing by appointment. Auction-ID: A1-40333-103

7200 liters. Cooling motor included. In working order. Replaced the mixer motor a year and a half ago. Charging options available on site. Auction-ID: A3-46111-21525