We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,626 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
MANUFACTURER: Niro Atomizer CAPACITY: 1.183 Kg/h, , APPLICATION: Milk powder and whey powder production. MACHINE COMES WITH: External vibro fluid bed dryer, Niro F35 atomizer, powder cyclones, bag filters, air pre heating economizer unit, air heating unit with steam heat exchangers, vibro sieve powder calibration unit, air ventilators, air locks, rotary valves and many accesories...
used
Line is suitable for production: - Different nut (almond, hazelnut etc.) milks - Soya milk - Seeds (hemp, poppy etc.) milks - Different non-carbonized soft drinks (juices, lemonades etc.) - Cow milk (powder milk) Equipment: 1) Nut cleaning and soaking tanks 2) Nut peeler 3) Nut/beans/seeds mill 4) Milled nut/beans/seed filter 5) Product emulsification tank (with heating) 6) Buffer tanks 7) Homogenizer 8) Pasteurizer 9) Filler 10) CIP station Line capacity: •Almond nut peeling machine – 150 kg/h •Nut colloid mill – 150 kg/h •Homogenizer/pasteurizer capacity – 500 liters/h •Semi manual filling machine – 300-400 bottles/h Line in dismantled and packed into 45HC feat container (container includes in price). All wiring and pipeline includes.
new
Auger filler for non-free-flowing powder products (milk powder, etc.). Stainless steel filling system with rotating screw. Screw and stirrer are driven by servo motors. - Specifications: filling weight: 500-25000g | hopper volume: 100 liters | accuracy?0,5% | max. speed of the machine in neutral: max. 4 cycles/minute | side opening hopper. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
new
AMTEC VERTIwrap auger filling unit Auger filling system. Dosing system for non-free-flowing powder products (milk powder, etc.). Stainless steel. Filling system with rotating screw. Servo motor. - Specifications: filling weight: 10-5000g | 65 liter filling hopper | accuracy: 0,5-2% | max. speed of the machine in neutral: max. 40 cycles/minute | airproof, damp pressure, side opening hopper, including dust collector. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All mach ...
new
AMTEC VERTIwrap auger filling unit Auger filling system. Dosing system for non-free-flowing powder products (milk powder, etc.). Stainless steel, filling system with rotating screw. Servo motor. - Specifications: filling weight: 10-2000g | 50 liter filling hopper | accuracy: 0.5-2% | max. speed of the machine in neutral: 60 cycles/minute | airproof | damp pressure, side opening hopper, including dust collector. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines ...
new
AMTEC VERTIwrap auger filling unit Auger filling system. Dosing system for non-free-flowing powder products (milk powder, etc.). Stainless steel. Filling system with rotating screw. Servo motor. - Specifications: filling weight: 1-300g | 26 liter filling hopper | accuracy: 1-2% | max. speed of the machine in neutral: 20-60 cycles/minute | airproof, damp pressure, side opening hopper, including dust collector. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines a ...
new
Automatic container/capsule filling and sealing machine. - Suitable for the filling of powdery products (coffee, coffee blends, chocolate, milk powder, etc.) in different sized capsule containers (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, without filter, etc.) and subsequent sealing. Automatic dosing, filling by an auger filler. UV sterilization system, anti-static device and vacuum cleaning system for mould formats included. Automatic film feeding and double heat sealing of the capsule. - Specifications: max. speed of the machine in neutral: 90 cups/minute | filling range: 0-20g | filling accuracy: +/- 0.15g | capacity of hopper: 10L (approx. 6kg powder) | power supply and consumption: 220V, 7.5kW | required compressed air and flow rate: 6-8 bar, approx. 300L/min | flow rate inert gas: approx. 200L/min | machine dimensions: L3420xW2200xH2688mm | weight: 900 kg. Specifications ...
new
Automatic container/capsule filling and sealing machine. - Suitable for the filling of powdery products (coffee, coffee blends, chocolate, milk powder, etc.) in different sized capsule containers (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, without filter, etc.) and subsequent sealing. Automatic dosing, filling by an auger filler. UV sterilization system, anti-static device and vacuum cleaning system for mould formats included. Automatic film feeding and double heat sealing of the capsule. - Specifications: max. speed of the machine in neutral: 55 cups/minute | filling range: 0-20g | filling accuracy: +/- 0.15g | capacity of hopper: 5L (approx. 3kg powder) | power supply and consumption: 220V, 1.5kW | required compressed air and flow rate: 6-8 bar, approx. 300L/min | flow rate inert gas: approx. 200L/min | machine dimensions: L1900xW1118xH2524mm | weight: 800 kg. Specifications ...
used
Clocked, vertical Bosch flow-wrapping machine for powdered products with gassing and checkweigher The following components are installed: Bosch form, fill and seal machine Machine type: SVB3601R Year of construction: 2000 Clocked form, fill and seal machine Theoretically possible cycle rate: 50 btl./min. Bosch screw feeders Machine type: FVS 3091 SQ Products suitable for dosing: -Granules -Powder -Icing sugar -Flour - Ground coffee or coffee beans - Sauce, soup or milk powder, etc. Fumigation device Machine type: ZSG Basic 2 Residual oxygen monitoring can be switched on/off Bosch checkweigher Machine type: KWE 5000 Year of construction: 2009 The plant was dismantled and stored due to product changeover. 6 months before the removal of the machine, a lot of investments were made, including the installation of new sealing jaws and a new display. We ...
used
designed for powder, made by stainless steel, with pneumatic filter cleaning, with external suction blower, function tested
Format: 59 x 74 cm<br>Perfection 8/0 - 4/4 Color Pilot Plus Ink Control AIR Center (Rietschle) Technotrans temperation Technotrans Combi cooling device with external capacitor Washing machine device for pressure cylinders Quickstart Low Cover Stabilization Powder (Hitronic) Inline Observer Optiprint Jacket Preparation Color temperation Non-Stop Semiautomat Delivery<><br>Still in operation: Yes<br>Verf Gbar: Immediately
used
Kat-No 10-1271 New Container capacity: approx. 15 litres Batch size: 3-10 litres Material: stainless steel V2A 1.4301 Frame construction: mobile Double coat Insulated 3 bar Homogenizer 5.5 kW 500-3000 RPM Agitator 0.5 kW 30 RPM Scraper stirrer 0.18 kW adjustable 10-45 UPM Automatic vacuum control 0.55 kW Lid can be folded manually Display of product temperature Template container left 3 litres for powder components Template container on the right 3 litres for liquid components The price is valid for a process system. For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share ...
used
Filter for powder coating / surface coating Offer: Filter cell for ITW Gema 592 x 592 x 292 mm in stock Price net 298 € pc. Filter cartridge standard 327 x 605 mm Price net 114.00 pcs Powder coating / sand & ball beam systems / welding fumes and ventilation systems . Cartridges / cassettes / suspended fabric / pocket filters / cassettes in aluminium and stainless steel . Special production possible. Service and advice. Pradler Maschinen Service Anerkanter Maintenance Technician Mobile: 0171 / 4513691 Tel. 05242 / 43186 Fax. 05242 / 47898 email to : info@pradler Mfg. Pradler Maschinen Service 05242 / 43186
Vertical awning electric, for shading high windows and conservatory Height approx. 4 m (can also be shortened) Width 1.3m Fabric fabric White with narrow red stripes, tear-resistant, rot-resistant, dirt-repellent and water-repellent Frame aluminium, powder coated, red Unit price 150,-- total 1500,-
used
Filter for powder coating / surface coating Offer: Filter cell for ITW Gema 592 x 592 x 292 mm in stock Price net 298 € pc. Filter partone f. Wagner ESB 327 x 605 mm Price net 108.50 pcs Filter cartridges / absolute cells / pocket filters / welding fumes / blasting systems / cassette filters in aluminium and stainless steel . Special production possible Advice in the field, powder coating/surface. Welding smoke/ventilation Mobile 0171 / 4513691 Pradler Machine Service Mobile: 0171 / 4513691 Tel. 05242 / 43186 Fax. 05242 / 47898 email to : info@pradler Mfg. Pradler Maschinen Service 05242 / 43186
Lifting device control MRC 2 220 - 240 VAC 50 Hz 3000 VA Lifting device control comes from operating resolution . Spare parts, filters, powder guns, wear parts in stock. Tel. 05242 / 43186 email info@pradler.com Filter cell Gema ITW 592 x 592 x 292 mm from operating resolution in stock Filter cartridge D = 327 x 605 mm for Wagner etc. in stock TS Residual filter D = 115 mm x 605 mm please enquiries / many pos. at the camp Mfg. Pradler Machine Service Tel. 05242 / 43186
new
Tanks fuel tank fuel tank storage tanks 5 cbm TAnkstelle diesel tank Gas station fuel tank tank tank heating oil tank storage tank 5,000 litres According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube, 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted. L = 2.70 m + console / D = 1.60 m / weight CA. 1.6 tons. / free charged ex works. On the tank, a pump / nozzle pump is installed on customer's request, ...
used
High voltage unit EPE 726 , Gema high voltage unit for two powder guns 100 KV , plug-in adjustable high voltage , dosing air and conveying air Switchable Pistol 1 / Pistol 2 / Pistol 1 + 2 Insert from maintenance general overhauled. Powder guns , spare parts in stock Tel.05242 / 43186 email: info@pradler Filter cells for Gema 592 x 592 x 292 mm 298.00 € per pc net see pictures . ! Prices Net excluding MWsT. Mfg Pradler Machine Service Tel. 05242 / 43186 email: info@pradler
used
The frame and the formwork is in a used good condition and can be used immediately. 26x Framax 1.35x2.70m 10x Framax 0.90x2.70m 6x Framax 0.60x2.70m 4x Framax 0.45x2.70m 4x Framax 0.30x2.70m 4x Framax 0.90x2.70m Uni 4x Framax inner corner 2.70m 2x Framax outer corner 2,70, 120x Framax RU Clamp 10x Framax Uni Spanner 10x Framax Universal Connector 10-16cm 12x Framax clamping clamp 4x Framax clamping rail 0.90m 2x Framax clamping rail 1.50m 1x Framax conversion bracket Other quantities or elements are available on request. Frame formwork Framax The high-performance steel frame formwork for large-area shelling with the crane Framax is the frame formwork system that achieves a consistent 15 cm grid with only a few elements, whether used standing or lying. All fasteners, all accessories blend seamlessly into the grid for fast formwork times and high cost-effectiveness ...
used
For the semi-automatic filling and dispensing of liquid products. Suitable for products such as milk, juices, oils, spirits, detergents, liquid toiletries etc. in cups, bottles, canisters, cans or similar containers. The container to be filled will be placed under the filling head, the product is sucked through a tube from the filler and discharged volumetric. Vollpneumatische version without electronics. The fill pulse is triggered via a pneumatic foot switch. Replacing the foot switch with pneumatic components such as a photocell or an external pulse, this filler can be integrated in existing systems. Capacity: 600-1.800 filling strokes per hour (depending on e.g. by product volume, filling speed, operating personnel, etc.) Number of filling stations: 1 Volume ranges depending on the model type: Type: fill: D-L1-60 10 - 60 ml D L1-250 25-250 ml D-L1-500 100-500 ml ...
used
Vertical awning electric for shading high windows and conservatory Vertical awning Height approx. 4 m (can also be shortened) Width 1.3m Fabric fabric White with narrow red stripes, tear-resistant, rot-resistant, dirt-repellent and water-repellent Frame aluminium, powder coated, red Unit price 150,-- total 1500,-
used
Westfalia MSA 20-06-076 milk/whey clarifyer. capacity 10000 l/hr, selfcleaning. including baseplate, tools, controlls and manual. Fully overhauled, build on stainlesssteel SKID.
used
Chromed cylinders, console, double sheet control, semi auto plate change, alcohol damping, technotrans recirculation and refrigeration, perfecting 2 / 2 and 4/0, Grafix powder spray, IR dryer, auto blanket ink roller washers, automatic impression cylinder washers Mitsubishi D 3000 - 4R (4/0-2/2) from 2003 A 4 colors offset printing press of size 72 x 102 cm Option; IPC (ink remote CTRL.), Mitsu. Alcohol damp. With technological TRANS recirculation & refrigeration and ink temperature control (techno TRANS BETA C), all auto. Washers, S - APC, car. Setting size and double sheet control PPC, Grafix IR dryer PERFECTOR 4/0 - 2/2, prepared for CIP connection, prepared for NON stop delivery, Grafix powder spray condition; VERY GOOD condition, ONLY 84 million impressions immediately available, can be Lakes RUNNING in our Factory Pictures at http://www.imprimerie-unal.com/p-d3000r/r1.html
used
ALFA-LAVAL Plate heatexchanger CLIP 10, YOM 1998. Used for milk pasteurisation. 5 sections, ±450 plates. good condition.
used
Valve sack filling-machine, system air packer. With this machine you can fill all mealy, powdery, grainy and lumpy bulk articles - even difficult kind- with pour weights from 0,1 kg/l until 2 kg/ l and filling weights from 10 - 50 kg in paper and plastic valve sacks or combination of both materials. The machine is in a very good state. You can also get the entire system with all components you need.
used
Material: steel Engine: 37 kW Weight: 900 kg Length x Width x Height: 1300 mm x 1000 mm x 900 mm Applicable for production of finest plastic-powder: - finest powder without use of nitrogen - best powder characteristic: best flow behaviour, high apparent density and narrow particle distribution - low grinding temperature, in terms of optimal ducting of the air - fully automatic continous operation - simple regluation of particle size. Throughput rate : 50 - 200 kg / h. Very good condition. Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.
used
Material: stainless steel The Flexomix is a vertical continue mix- and agglomerate engine with high capacity and need a minimum of space. The way of working is easy of operation, with a minimum of man power. Very good for the use of ultrafine, light products like washing powder and much more. Very good condition, like new. You can also get the entire system with all components you need.
We have for sale a very good conditioned A1 with very low working hours. Tetra Pak® A1 for Tetra Classic® Aseptic (TCA) is a filling machine for aseptic packaging of liquid food. Tetra Pak® A1 for TCA puts aseptic packaging technology at your disposal, enabling you to produce the Tetra Classic® Aseptic package. Tetra Pak® A1 For TCA 150S Used Aseptic Filling Machine Make: Tetra Pak® Model: TCA A1 150 ml Slimline Area of use: juice, milk, water, tea, wine, other liquids Working hours: 2218 Year of manufacture: 2004 Capacity: approx. 10000 p/h Condition: very used good condition Tetra Straw Applicator 1 Make: Tetra Pak® Year of manufacture: 2005 Working hours: 2110 Tetra Pak® 10 m Conveyors
used
Material conveying stations for powdered materials, on movable base, with material dropler in V2A (dimensions 700 mm x 700 mm, incl. protective grille inside), blow-through cell wheel lock in V2A (200 mm , 0.55 kW drive) Fabr. Seeger, AerzenER GMA rotary piston blower incl. drive, air filter, compensating vessel and control cabinet.
used
Type: FPE722C No.: 42439351 Engine: MT motor Performance: approx. 1.5 kW, 2970 RPM Dimensions: LWH = 500x200x230mm Weight: approx. 40 kg Milk bolting DN 40
used
Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...
used
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...
used
Mobile pneumatic conveyor unit for powdery products, on base frame, with stainless steel feeding hopper (700 mm x 700 mm, incl. safety grid inside), blow-through rotary vane in stainless steel (200 mm Ø, 0,55 kW drive) by Seeger, Aerzener GMA-blower incl. Drive, air filter, compensation tank and switchgear cabinet.
used
Type: FPE722C No.: 0424470326 Engine: ATB in Exx Power: kW 3,3 Year of construction: 2004 n = 2830 RPM Dimensions: LWH = 600 x 300 x 330 mm Weight: approx. 60 kg Frontal connection DN 50, up DN 36 Milk tube
used
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce ...
used
Powder injection dispersion system Year of construction: 2001 No.: 0103201 High-quality system for dispersing extremely difficult aufschließbarer thickener, stabilizer, gelling agent, etc. fully automated system Dimensions: LWH = 800 x 1200 x 1700 Weight: 300 kg
used
Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...
used
Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. ...
used
Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. ...
used
Powder injection dispersion system Type: PID-PAJAM No.: 0212 1140 Year of construction: 2003 High-quality system for dispersing extremely difficult aufschließbarer thickener, stabilizer, gelling agent, etc. fully automated system Dimensions: LWH = 800 x 1200 x 1700 Weight: 300 kg New price: 55 000 EUR
used
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new concept of working with an "invisible" motor for the X-axis an ...
used
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). 3D engraving, bas reliefs in marble etc. Create and mill, what ever you want . The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our ...
used
Used ultra filtration line for milk and whey Brand: Type: UF 70 capacity: 10.000 l / h Dimension: Stages: 4 inlcuding likes: Mono pump, UHT equipment, pre storage tank, whey cirulation pump 2 x cleaning pump UF for whey and milk: - manufacturer: Hungarian milk R + D Kft. -Date of fabr: 1989 - weight: ~ 2000 kg - membranes: Cook XL-1000 4336-HFK-131-VYV - flow capacity: 13,500 litres / h - temp/pressure: 52 ° C (6 bar) - material: tubes and pipes: WNr. 1.4301 - membranes: Cook XL-1000 organic spiral membrane - cleaning: with CIP - Accessories: complete eletric box, and PC aided control. -Energies: Electric power (about 40 kW)
used
The frames and skin are in a good, very good condition. Parts with new finply. 40x Framax 1,35x2,70m 22x Framax 0,90x2,70m 8x Framax 0,60x2,70m 8x Framax 0,45x2,70m 8x Framax 0,30x2,70m 10x Framax 0,90x2,70m Uni 4x Framax Insidecorner 2,70m 4x Framax Outside corner2,70, 312x Framax RU Clamp 20x Framax Universal fixing bolt10-16cm 24x Framax wedge clamp 12x Framax Universal walling 0,90m 12x Framax Universal walling 1,50m 20x Framax bracket 90 5x Panel strut 340 2x Framax lifting hook 210x tie rod 1,00m 420x super plate 15 2x Doka Box 1,20x0,80m Framed formwork Framax Xlife The high-performing steel-framed formwork for crane-assisted forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All t ...
used
Stainless steel mixer Content 4 litres Power 1.1 kW for powdered to pasty products 2 pieces available
used
Tool cabinet for bending tools pull-out drawers, allows the two-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated, in any colors of the RAL pallet -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) . number of drawers: 4 squares - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1050mm - mass of the faeces set in a drawer: compartment heahe on 210mm (is varriabel) technical height can be used in total without intermediate boeden 990mm compartment width usable 130mm depth usable 980mm - number of intermediate boeden: 3 stubs ; ready for use
used
Tool cabinet for bending tools Suitable for WILA/TRUMPF Tools or type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -extendable drawers, allows the two-sided access to the tools -arbitrary adjustment of the inserting roofs -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) run drawers Roller slide rails (serve as additional stabilization) - the cabinet can be disassembled - number of drawers: 4 sets - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1180mm - Mass of the Fa echer in a drawer: compartment hoehe set to 210mm (is varriabel) technical height total usable without intermediate boeden 990mm - specialist width usable 130mm depth usable 1100mm - Number of intermediate boeden: 4 Stueck / completely continuous; new ready for use
used
Tool cabinet for bending tools / exhibition object suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg - for AMADA/Promecam tools -extendable drawers, allows double-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated -side fork rails for transport by forklift (cavity under the cabinet) -the drawers run on roller slide rails ( serve as additional stabilization) -the cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Fachbreite usable 130mm - Technical depth usable 980mm - Number of intermediate boeden: 3 stueck
new
Tool cabinet for bending tools suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allows the two-sided access to the tools -any adjustment of the inserting -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Tray width usable 130mm - Depth usable 980mm - Number of intermediate boeden: 3 stueck
size 59 x 74 cm Perfecting 8/0 - 4/4 Color-Pilot-Plus ink control system AIR Center (Rietschle) Technotrans temperation Technotrans combi cooling device with external condensator washing device for printing cylinder Quickstart Low Coverage stabilisation Powder (Hitronic) Inline Observer Optiprint Jackets preparation for colour temperation Non Stop semiautomat delivery Still in operation: Yes Available: sofort