milk powder used for sale

Used milk powder plant made by FAM with Niro atomizer spray dryer. The powder plant consists of: 2-stage falling film evaporator type M-1 /A/: Technical data: 1. Raw material – skimmed milk - Dry matter content 9% - Temperature 5 °C - Feed stream 1,250 kg/h - Water evaporation capacity 1,000 kg/h 2. Product – condensed milk - Dry matter content 45% - Feed stream 250 kg/h - Temperature 45°C Spray dryer type Niro Atomizer R1 /A/: Technical data: 1. Raw material – skimmed milk - Feed stream 250 kg/h - Dry matter content 45-48% - Temperature 45 °C 2. Product – milk powder - Feed stream 100 kg/h - Water content 4% 3. Heating medium – saturated steam - Steam pressure at the air heater 1 MPa - Consumption 450 kg/h 4. Installed power 31 kW.

Milk Pasteurisation Set With Seital Separator 2000-3000[tel:2000-3000] L/h Description This Combined GEA VT 10 pasteuriser with Seital Cream Separator was used on Cheese and Fresh milk products. This is ideal for a small/medium sized dairy wanting to move away from manual cleaning separators and Bach Pasteurization process gaining time, efficiency and product quality . Having a cream separator opens new markets for the dairy such as butter, cream, clotted cream, skimmed milk and zero fat milk products are some of the opportunities. Pasteuriser Make : GEA Model : VT 10 Year of Manufacture : 2005 S/N : 169/15597[tel:169/15597] Temperatures: Shown in Chart Hot Water inlet PHE Balance Tank Temperature Valve regulation Diver Valve for non pasteurised product Chart Recorder Product pumps Water Pump Stainless steel skid mounted for quick installation Con ...

pasteurizer for cream efficiency: 7500 l/h GEA plate heat exchanger valves and pumps : ALva Laval flow meters -Endress + Hauser Offer details and photos will be sent to the email.

Seital SE15X Milk Separator Capacity 3.000 lt/h Comes with tools kit and instructions book

Seital SE20X Milk & Whey Separator Capacity 5.000 lt/h Comes with tools kit and instructions book

x-travel: 640 mm y-travel: 200 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Milko Type: 12 Table length: 1.000 mm Table width: 220 mm X: 640 mm Y: 200 mm Z: 400 mm Spindle taper: ISO 40 Maximum speed: 1.700 RPM Digital readout: Fagor Automatic feeding on X Machine is equipped with Huron head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SEITAL SE15 X MILK & WHEY SEPARATOR APPLICATION: CREAM SEPARATOR CAPACITY: 3.200 LT/H FOR MILK SKIMMING 4.500 LT/H FOR WHEY SKIMMING MACHINE COMES WITH TOOLS AND INSTRUCTIONS BOOK.

SEITAL SE30 MILK & WHEY SEPARATOR APPLICATION: CREAM SEPARATION CAPACITY: 7.000 LT/H FOR MILK SKIMMING 10.000 LT/H FOR WHEY SKIMMING MACHINE COMES WITH TOOLS AND INSTRUCTIONS BOOK

WESTFALIA MSB 60-01-076 MILK SEPARATOR CENTRIFUGE USED FOR MILK SKIMMING, WHEY SKIMMING, CREAM SEPARATION, FAT SEPARATION FEED CAPACITY: 7.000 LT/H MACHINE COMES WITH TOOLS KIT AND SOME SPARE PARTS INSTRUCTIONS BOOKS ARE AVAILABLE 2 PCS AVAILABLE IN STOCK !

Pasteuriser for Milk 12,000 L/h Make : Fisher Model: E43 CFG Y.o.m : 2009 Capacity : 12,000 Litres Outlets : Separator & Homogeniser Thermal Circle : 4-45-65-75-4 Skid Mounted Condition : Very well maintained

FBF Homogeniser 12,000 L/h 180 bar Make : FBF Model :075 Capacity : 12,000 L/H Bar Pressure : 180 bar Motor :76.5 kw Y.o.m : 2008 Weight : 2850 kg Condition : very good condition

3,800 liter rinsing milk tank/storage tank made of V2A Characteristics: volume 3800 L material V2A (AISI 304) 1.4301 Total height 2400 mm Cylinder height 1100 mm inner diameter 1850 mm Outside surface marbled Surface inside 2B=IIIC ground Design Vertical Number of feet 3 Description: MJ UNI-HIGH Topsoil: Flat floor with 3% slope threaded connector CIP ball Manhole Ø 540 mm vent nozzle Tank cylinder: 2 x Step Arches 2 x Disc Valve Underbody: Cone bottom drawn from outside to inside Residual Drain Pipe 3 solid feet

Used manual batch ultrafiltration line for cottage cheese made by Agros Milko-Polska. Capacity: 2.500 kg of finished product in 8 hours, concentrated to 72% dry matter. New: 1996

Fresh Milk Pasteurisation & Bottling Line General Overview: Complete fresh milk processing and bottling line, designed for small to medium-scale dairy production. The line covers the full process from separation and pasteurisation to homogenisation, filling, and final packaging of 1L PET bottles. All components are industrial-grade and suitable for continuous operation. Process Flow: - Milk separation - Pasteurisation (flash system) - Homogenisation - Buffering / storage - Bottle handling and filling - Sealing, labelling, coding, and packaging Main Components & Technical Specifications: - Milk Cream Separator - Make: Seital - Model: SE13X - Capacity: 2,500 L/h - Year of Make: 1993 - Plate Heat Exchanger – Flash Pasteuriser - Make: KMA - Model: K21-FS/4273 - Capacity: 2,500 L/h (heating from 8°C to 75°C) - Year of Make: 1998 - Homogenizer  ...

This Sterile Milk Tank has a Capacity of 16,700 Litres, it does not include the valve cluster and PLC program. There are a few valves available with the tank but these would need to be reconnected to a valve cluster program. This tank was connected to a central control room . The condition is good and there has not been any damages . Aseptic tanks are used for the process of Milk, Juice and other liquids required aseptic pasteurisation prior to the filling machines., The APV Aseptic Tank is a type of equipment designed for the storage and processing of liquids, particularly in industries such as food and beverage, pharmaceuticals, and biotechnology. Here are some key features of the APV Aseptic Tank:, - Sterile Environment: The APV aseptic tank maintains an environment that is free from contaminants, crucial for the integrity and safety of the stored product., - Construction Material: Ty ...

: gebraucht : 2003 : 4544 : prompt, Zwischenverkauf v : Spanien : 13800 € : 1 : 50 - 1700 (12) U/min : ISO 40 : 600/210/400 mm : 800 x 225 mm : 1500 mm : 1350 mm : 1850 mm : 950 kg : 1,5 kW with 3-axis digital display Fabr.Fagor Cooling equipment Machine lamp Swivelling universal milling head (Huron design) Horizontal milling device with counter bearing Table enclosure automatic feeds in X and Y Machine feets User Manual and EG Confirmation english BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:https://www.hesse-maschinen.com/en/lp/used-m ...

: gebraucht : 2002 : 4543 : prompt, Zwischenverkauf v : Spanien : 11400 € : 1 : 50 - 1700 (12) U/min : ISO 40 : 600/210/400 mm : 800 x 225 mm : 1700 mm : 1500 mm : 1960 mm : 950 kg : 1,5 kW with 3-Axis Digital display Fabr. Time Technology Europe Swivelling universal milling head (Huron design) Horizontal milling device with counter bearing and 1 pc. long milling arbor Coolant device Machine light automatic feeds in X and Y Machine feet with vibration absorbers no User Manual DOES NOT COMPLY WITH GERMAN UVV &, AUSTRIAN AMVO BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PUR ...

Mechanical Liguid Flowmeter

General SKU305U634 MakeHaver &: Boecker Type1 WXEH- (U) No.51/246325/01 Year of construction2005 Mounted in framecheck Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler Powder fillercheck Bag fillercheck Pneumatic fillingcheck Number of dosing heads:1 Dosing15 and 20 kg (max. 50 kg) Capacity30-100 bags/hour a 15 and 20 kg With motor7,5 kW, 400 volt, 1500 rpm (EX) With hoppercheck Hopper sizesDia. 400x640 mm With mixer in hoppercheck MaterialStainless steel 1.4301 (304) General LocationBarneveld With switchgearcheck Floorspace1,4 x 1,8 m Total height2,1 m Weight800 kg CEcheck ATEX designedcheckPowder fillersPowdered foodsHaver & BoeckerPackaging machines > Powder fillersIndustries > Food & Feed > Powdered foodsBrand > Haver & Boecker What you can expect from Foeth: -- Machine is in working condition -- At a reduced pric ...

General SKU329T1340 MakeDec TypeDrum sealing cover No.DSC-130 Year of construction2016 Mounted in framecheck Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler MaterialGlass, Stainless steel 1.4435 (316L) General LocationBarneveld Floorspace0,79x1,32 m Total height2,9 m Weight400 kg CEcheck ATEX designedcheck Extra information With powderbox, Dia:500x200mm lifting column stroke 320mm balancer cap. 7,5-11,5 kg suction lance DN40 triclamp x approx 1500mm cip connection Stäubli R 1/4” hub 2000mm, Magnehelic box Bizerba weighing scale, type ST-D-Z2, (Ex) Dec powder transfer system, type PTS 80-N cap. 500l/h temp range max 100°C pressure -50/+50 PED class Gas 2/ Art. 3.3, consumption 5 Nm3/h (stickstoff) at 3 bar, product input DN 32 Triclamp, product output DN80 PN10, pneumatic control, dim. 600x380x210 mm, roll conveyor, dim. 8 ...

VG1E-VN MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM It is designed for powder coating applications with frequently color change within the day. Suction is directly from powder coating box that maintains easily fast color change. Equipment is movable. The chassis under the powder box is vibrating with the help of the vibration motor mounted under it. Powder suction tube is specifically designed to fluidize powder coating particles and to send them to the powder gun by help of the injector located at the top of this pipe with maximum efficiency. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 75 Kg VM G01 POWDER COATING GUN AND CONTROLLER VM manual powder coating gun is fully demountable. Ergonomic pistol handle design provides ergonomic use and not tire operator while coat ...

VM VG1-VN VOGA MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM It is designed for powder coating applications with frequently color change within the day. Suction is directly from powder coating box that maintains easily fast color change. Equipment is movable. The chassis under the powder box is vibrating with the help of the vibration motor mounted under it. Powder suction tube is specifically designed to fluidize powder coating particles and to send them to the powder gun by help of the injector located at the top of this pipe with maximum efficiency. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 70 Kg VM G01 POWDER COATING GUN AND CONTROLLER VM manual powder coating gun is fully demountable. Ergonomic pistol handle design provides ergonomic use and not tire operator whil ...

VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of p ...

PATRONENFILTER FÜR PULVERBESCHICHTUNGSKABINEN Die Filter bestehen aus 100% reinem Polyester. Nachstehend sind die verfügbaren Standardgrößen aufgeführt 320x600mm 320x650mm 320x1000mm 320x1200mm Andere Größen und Spezifikationen können ebenfalls angefertigt werden. Kontaktieren Sie uns für weitere Informationen und Preise. für Pulverkabinen für Staubabscheider für automatische Maschinen für Pulverbeschichtungsanlagen hoher Wirkungsgrad antistatische Option Option Bajonettanschluss POWDER COATING BOOTH CARTRIDGE FILTERS Filters made of 100% pure polyester. Available standard sizes; 320x600mm 320x650mm 320x1000mm 320x1200mm Available polyester filter media density; 160 g/m2 200 g/m2 260 g/m2 Demands of different sizes and specifications can also be manufactured.

1. VFK CARTRIDGE FILTERED POWDER COATING BOOTH (1-SIDED) Cartridge type powder coating booths are cost-effective solutions for companies that generally use single color powder coating or do not change the paint color much. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bot ...

Pulverbeschichtungsanlage für Autofelgen Kann 4 Stück 22"-Felgen in 1 Charge pulverbeschichten Komponenten der Anlage: 1,5x1x1,28m Pulverbeschichtungsofen, 18KW elektrisch VFK-2 einseitige manuelle Pulverbeschichtungskabine Förderstrecke und Ladewagen Manuelle Pulverbeschichtungsanlage Lieferung - 8 Wochen EXW Istanbul Fabrik Inklusive Montage und Schulung Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment Delivery - 8 weeks EXW Istanbul Factory Assembly and training included

CABLE POWDERING MACHINE FOR ELECTRICAL CABLES EXTERNAL DIMENSIONS Length : 1.000 mm Width : 1.000 mm Height : 2100 mm CABLE PASSAGE Size : 100 mm diameter Height from ground : 1.000 mm Cable insulation material : PVC, PE, XLPE to be used Cable size to be powdered: 5–70 mm diameter HIGH VOLTAGE UNIT Input voltage : 14V 16kHZ Output voltage : 100 kV Max. current : 120 µa Polarization : Negative TECHNICAL SPECIFICATIONS OF THE MACHINE Input : 220V 50 Hz Installed power : 1 KW Extraction fan : 3.000 m³/h 0,75KW Vibration : 0,15KW 220V Compressed air : 6-10 bar Air consumption : 300 lt/min Filtration : 320x300mm polyester filter Filter cleaning : Automatic Powder recycling : Vibration sieve Powdering method : Application by 2 electrodes, electro static application

2. VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists o ...

POWDER COATING LAB HAND GUN WAGNER & GEMA COMPATIBLE, WORKS PERFECTLY WITH THE ORIGINAL CONTROLLER DELIVERY: 100Kv LABO HAND GUN 5m CABLE + COMPATIBLE SOCKET

POWDER COATING HAND GUN Cost effective and long life cascade Made in Turkey

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment Delivery - 8 weeks EXW Istanbul Factory Assembly and training included

Powder coating plant Complete line for automatic powder coating The line was operated by us until the end of February and until then it was functional and as required has coated 1 or 2 coats. The complete line includes the following elements: 3 zone spray washing system (DEGREASING): Manufacturer OMT Otto Müller GmbH, Fellbach Year of construction 1997 The pretreatment tunnel is a unit of the painting line, where the surface treatment of the parts is carried out by spraying with chemical solutions. solutions. Its purpose is to degrease and clean the surface of the parts. Dimensions approx: - Length 13.000 mm - width 230 mm - Height 3950 mm (tunnel and fan in total) Dimensions of workpieces: - Length 1,200 mm - width 300 mm - height 600 mm AUTOMATIC SPRAY BOOTH: Company ESB Vöhringer GmbH (now Wagner GmbH) Series: IC-3 Type: A2M 8000 year of construction 1989 Ext ...

We are offering for sale an Automatic Powder Coating Line with full encapsulation of the production process manufactured by Ecoline. Machine is new. Has not been used! Elements included in the line: - Surface preparation tunnel - Drying oven - Cooling tunnel after drying - Manual cabin for short series - Dielectric automatic cabin for quick color change - GEMA applications - Cleanroom to maintain constant operating parameters throughout the year (temperature and humidity) - Polymerization oven - Cooling tunnel after firing - Automatic mono rotary conveyor Additional Information: - 3-zone tunnel entirely made of stainless steel. The first section is heated by an external exchanger and equipped with a coalescing oil separator and bag filtration. Additional equipment includes an automatic chemical dosing system from Endress Hauser. - Drying oven with very good insulation with air curt ...

POWDER ENAMEL COATING EQUIPMENT HIGH ENAMELING COVERAGE MANUAL OR AUTOMATIC MADE IN TÜRKİYE COST EFFECTIVE, GOOD QUALITY AND LONG LIFE TECHNICAL SPECIFICATIONS Gun Type : Corona System Polarization : Negative Cascade input voltage: 0-10,5V DC Output voltage : 100 kV Output current : 0 -150 μA Protection class : IP 54 Operating temperature :-20-50 ° C Nozzle : Ø16-20-24mm deflectör + Nozzle

Manufacturer: Heiche Model: HEIS02 Machine type: Powder coating line Year of manufacture: 1999 / 2013 (conversion) Status: Operational / Ready for use Technical Specifications - Overall dimensions (L x W x H): approx. 24 m x 15 m x 5 m - Maximum workpiece window: 1,150 x 880 x 350 mm - Maximum load per metre: 60 kg on 2 brackets - Compatible materials: Steel, aluminium, stainless steel, zinc die-cast - Coating thickness: 40 - 200 microns - Conveyor speed / throughput: 0.3 - 3.0 m/min - Noise level: less than 85 dB(A) - Control system: Siemens S7-1500 - Operating software: ICOM (upgraded 2024) - Operating modes: Manual and automatic - Conveyor system: Chain conveyor - Number of pre-treatment baths: 8 - Automatic powder coating booth: 1 - Manual powder coating booth: 1 - Drying: Adhesive water dryer + curing oven - Loading / unloading: Manual along the chain conveyor Utilities and C ...

Poedercoatunit met Gema handpistool + recuperatie/filter Uithardingsoven, afmetingen van de binnenkamer: - 2000 mm breed - Hoogte: 1500 mm - 1500 mm diepte

Description Item #9008 - POWDER SACHET MACHINE Manufactured by VOLPAK Duplex Sachet Machine Model S-240-D set up to do individual sachet size 70 x 70mms, duplex at 50 strokes per minute, (100 sachets per minute) Suitable for maximum size sachets of approx.150 x 150mms For Preprinted foils, there is a photo electric cell to recognise a mark on the foil It was being used for packing Herbs & Spices, most products were dry salt based” products Foil Transportation through machine id done with Pins Opening of the Bags/sachets by suction cups Including Twin Auger Dosing unit Including MARKEM SmartDate X40 Coding Unit 415Volts, 50Hz, 16.2 Amp

Description Item # 9270 – Coating/Powdering Drum This machine is designed for coating products with sprinkling materials such as desiccated coconut, vermicelli, nonpareille, granulated sugar, powdered sugar, cocoa powder, flavorings, nut or almond pieces. Manufactured by WOLF Model WPD-400 Year 2024 Working width: approx. 400 mm Drum diameter: 400 mm / Drum length: 870 mm Power consumption: 0.3 kW Rotation speed: 7–9 rpm Conveyor speed: 2.5 m/min Overall dimensions (L×W×H): 1555 × 1015 × 530 mm Compressed air consumption: 10 l/min Electricity: 220 V, 50 Hz

Reconditioned powder scatter coating and laminating line for thermoplastic powders. Working width 2 x 000 mm. New powder-spreading system for coating and lamination by means of thermoplastic powders. Working width 2 x 000 mm.

Used line for packing powdered products Chronos. Powdered products are packed in four-layer paper bags with a polyethylene insert of 25 kg net or BIG-BAG containers with a capacity of max 1000 kg. Packing in 25 kg bags takes place on an automatic Chronos packing machine. The packing machine automatically weighs, seals the polyethylene bag and seals the paper bag.

Hosokawa Powderplex Sifier Mill APP 400 Crushing and sighting Drive power 37 kW Engine speed 3000 1/min Pressure shock resistant up to 10 bar-Ü additional view terrad Very good ready-to-use condition, directly from production!

Stock # U2423-1 Used stainless steel conical nauta type powder mixer by Pharming type HV 1000 (CZ). Cone has diameter 1550 mm x height 2200 mm. Total volume of tank about 1700 l, working volume up to 1000 l. Total height 324 cm. Standard mixing screw is top driven by el. motor 3 kW, 970 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 330 cm x diameter 170 cm x weight approx 1000 kg. Machine had been working in food industry.

Stock# U2423-2 Used stainless steel conical nauta type powder mixer by Pharming type HV 600 (CZ). Cone has diameter 1440 mm x height 1855 mm. Total volume of tank about 1300 l, working volume up to 600 l. Total height 2770 mm. Standard mixing screw is top driven by el. motor 3 kW, 965 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 277 cm x diameter 180 cm x weight 600 kg. Machine had been working in food industry.

AUTOMATISCHE PULVERBESCHICHTUNGSANLAGEN Einbrennofen - Gas-, Diesel- oder Elektroantrieb Pulverbeschichtungskabine - Monofarb- oder Zyklontyp - einfacher Farbwechsel Pulverbeschichtungsanlage - manuelles oder automatisches System - Wagner, Gema oder türkisch lokal Hängebahnsystem - Monorail oder Power&free Vorbehandlungslinie - chemischer Prozess je nach Produkt und Qualitätserwartung Wir bieten die beste technische Lösung mit bester Qualität und wettbewerbsfähigem Preis. Deutschsprachiger Area Manager in Deutschland verfügbar. Kontaktieren Sie uns für weitere Informationen und Angebote. VOGAMAKINA Ltd. infovogamakinacom ---------------------------------------------------------------------- --------- AUTOMATIC POWDER COATING PLANT Curing oven - gas, diesel or electric source Powder coating booth - Mono-color or cyclone type - easy color change ...

PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. infovogamakinacom

PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. infovogamakinacom

PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. infovogamakinacom

PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. infovogamakinacom

AUTOMATISCHE PULVERBESCHICHTUNGSANLAGE Einbrennofen - Gas-, Diesel- oder Elektroantrieb Pulverbeschichtungskabine - Monofarb- oder Zyklontyp - einfacher Farbwechsel Pulverbeschichtungsanlage - manuelles oder automatisches System - Wagner, Gema oder türkisch lokal Hängebahnsystem - Monorail oder Power&free Vorbehandlungslinie - chemischer Prozess je nach Produkt und Qualitätserwartung Wir bieten die beste technische Lösung mit bester Qualität und wettbewerbsfähigem Preis. Deutschsprachiger Area Manager in Deutschland verfügbar. Kontaktieren Sie uns für weitere Informationen und Angebote. VOGAMAKINA Ltd. infovogamakinacom ---------------------------------------------------------------------- --------- AUTOMATIC POWDER COATING PLANT Curing oven - gas, diesel or electric source Powder coating booth - Mono-color or cyclone type - easy color change  ...