microtecnica used for sale

We offer you here a used pallet rack stand of the Manufacturer's Mic Spica for purchase. Technical data on the pallet rack: Shelving system: Mic Spica The scope of delivery includes: 01x pallet rack, used Material colour: cream white Frame profile: 80 x 70 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 2,780 mm high 1,000 mm deep

Built in 1999 electric scissor pallet truck Load capacity 1,000 kg Lifting height approx. 80 cm Delivery date: immediately Price on request. We supply and install worldwide.

New, 250 hours of use • Feeds ground material from 6 to 10 mm and micronizes it to 500-600 μm; • Suitable for micronizing PP, PE, PS, ABS, PA, APET, and PMMA; • The material is fed into the center of a set of fixed discs and a set of rotating discs at high speed, with centrifugal force bringing the micronized material to the conveyor line; • Feeds through a stainless steel hopper with a vibrating feeder; Model Disc Diameter Motor Power Fan Flow Rate MP500 500mm 55 kW 7.5 kW 300 - 400 kg/h

General SKU473Y429 MakeHosokawa Micron B.V. Serial4606801/0200 TypeMicron Dryer MDV-5 (flash dryer / mill) + screw feeder DHA-200 Material Product contact materialStainless steel Cover materialStainless steel Rotor materialMild steel Extra information Temperature140 °C Weight5500 kilogram Rotor speed400 rpm Specified Features - Miscellaneous Mill Grindergrinding rotor with classifier in one body Motor55 kW Speed400 rpm Miscellaneous Mills MaterialMild steel, Stainless steel General Year of construction1995 Mounted on framecheck LocationBarneveld Weight5500 kg Extra information This Hosokawa Micron MDV-5 flash dryer combines drying, grinding and classifying in a single body: a vertically driven grinding rotor with an integrated classifier, housed in a dryer body with a wet material feeder inlet, a hot air/gas inlet and a product/air outlet at the top. StarchAgro ...

Inv. Num. : 8520 Type: MicroMill 2501.15F Producer: MicroStep Created: 2012 Parameters: Control System: iMSNC Software: Asper 3.5 – Basic Operating hours: 15000 h Work table length: 2500 mm Work table width: 1500 mm Source: MicroMill 2501.15F Equipment: Vacuum Suction Cups WITTE 84413 Filtration Nedermann E-PAK 500 3 mechanical grippers with manual pneumatic control on one side Static magazine for 8 tools at the end of the table

Inv. Num. : 8519 Type: MicroCut 3001.15P Producer: MicroStep Created: 2007, GO 2017 Parameters: Software: AsperWin Basic (2007) Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 40 mm Maximum sheet thickness when cutting (stainless steel): 40 mm Maximum sheet thickness (brass): 12 mm Maximum sheet thickness (copper): 12 mm Plasma Source: Formica ForCut 163W Burner: MT120

Zellschneider photovoltaic solar cells. 5000 whole cells from the front per hour. 10000 half cells from behind per hour

MICROSTEP MSF-Pipe-T 6501.200L tube and profile fiber laser was built in 2018 in Slovakia by MicroStep spol. S.r.o. The machine, which is designed for precision cutting of tubes and profiles of various cross-sections and non-standard shapes, is an excellent choice for modern business. This is because a number of state-of-the-art technical solutions guarantee the most accurate cutting results throughout its entire service life. 2D or 3D cutting is performed by means of a stable 2 kW fibre optic beam, which is generated by a resonator of the highest energy efficiency. The 3D laser scanner accurately measures the workpiece before machining to determine its actual shape along the cutting trajectory. Advanced algorithms then allow the control system to appropriately adjust the movement of the cutting tool and supports, as well as compensate any workpiece inaccuracies. The work area is c ...

x-travel: 4000 mm y-travel: 2000 mm z-travel: mm : 4000 bar total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC ...

General SKU325W681 LocationBarneveld CEcheck MakeStable Micro Systems TypeTA. XT. Plus Mach.No.11506 Year of constructionunknown Floor space0,28 x 0,45 m Total height0,66 m Extra SpecificationsTexture analyser.Fine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsBiopharmaceuticalDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsAPIPlastic & rubberQuality ControlsMinerals & inorganicTea, herbs & coffeeOintmentsGeneric medicinesPowdered foodsPaints & coatingsConsumer wasteOils & fatStable Micro SystemsIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemi ...

The Benhil Microfix rationalises the processing and packaging of cold store butter. The machine reduces the time it takes to defrost butter, it improves the quality of the butter by creating the finest water dispersion and improves the spreadability of the butter. Microfix 8471 butter homogeniser Capacity: up to 1.400 Kgs/Hour Rotor motor power: 20 HP Feed worms motor: 3.8 HP Manual included Length: 200 cms Width: 90 cms Height: 170 cms Weight: Approx. 900 Kg Made in : Germany

We sell 10032 x Micron 8GB DDR4 2666MHz Dual Rank Server Memory Manufacturer: Micron P/N: 18ASF1G72PDZ-2G6E1 In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complet ...

We sell 2500 x Micron 16GB DDR4 2Rx4 PC4-2666V-RB2-11 MTA36ASF2G72PZ-2G6B2QG COO China 15000 x Micron 16GB DDR4 2Rx8 PC4-2933Y-RE2-12 MTA1BASF2G72PDZ COO Taiwan In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales a ...

Plasma cutting machine manufactured in 2007. This MicroStep SPLR-P features a Kjellberg HiFocus 160i PLUS plasma power source, offering a cutting current range of 10A to 160A. It includes an integrated CNC operator terminal for precise control and a filtration system by Donaldson Torit DCE. If you are looking to get high-quality plasma cutting capabilities, consider the MicroStep SPLR-P machine we have for sale. Contact us for further details.

This 4-axis STAR MICRONICS SR20 was manufactured in 1998. It features a FANUC Series 16-T control unit and includes an IEMCA Bar Feeder for enhanced productivity. The machine is operational and in good condition, with occasional faults in the hydraulic system. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SR20 swiss type turning machine we have for sale. Contact us for further details.

Manufacturer / Type: MicroStep SPL-PA 6001.25 + S500 Processing area: 6,000 x 1,500 mm + 500 mm shaft Drive: double-sided backlash-free DC servo drive Guide system: Linear guides Positioning speed: up to 44,000 mm/min Repeatability: according to DIN 28206 / IRC 2500 Control: MicroStep iMSNC incl. touch control panel and software Kjellberg HiFocus 160i Current range: 10 – 160 A Operating voltage: 400V, 3~50Hz Power: 33 kVA Gases: air, oxygen, nitrogen, argon, hydrogen Donaldson DFPRO 6 Cyclopeel – automatic filter cleaning Separation efficiency: 99.999 % at 0.5 μm Extraction volume: 4,500 m³/h Low noise ( < 75 dB(A)) Including oil/water separator and software connection

Manufacturer: SUSS Model: MicroTec ACS200Gen3 Year of Manufacture: 2021 Electric Power: - Voltage: 400V 3-phase + N + PE - Power: 16 kVA - Frequency: 50 Hz - AIC: 100 kA / 400 VAC - FLC: 23 A - SCCR: 5 kA - Max. Single Load: 5.5 A Pneumatic Connections: - CDA (Air): 6 bar ±10% - Nitrogen (N₂): 6 bar ±10% - Vacuum (VAC): -0.8 bar ±0.1% - DIW (Deionized Water): — bar Compliance: CE Marked The Suss MicroTec comes complete with HDD and software, wafer size 200 mm. It has an inkjet printer, not a classic coating/development tool. This means no cool plates, no coating/developer unit. It only has two hot plates, a centering station, and a main chamber where the inkjet printing takes place. Find more here - .ucymachines/ Contact us at - sales@ucymachines

MicroStep SPL-PA plasma cutting system with extraction and compressor technology Manufacturer: MicroStep Group Model No.: SPL-PA 4501.15+S50 Machine Type: CNC Plasma Cutting Machine CNC Control: iMSNC Construction: Portal design with linear guides Extraction system: Donaldson Torit DCE Electrical connection extraction system: 400 volts Motor power extraction system: 7.5 kW Compressed Air Generation: Screw Compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE marking: available Location: Waltenhofen, Germany Dismantling and loading by sellers included

This 3-axis MICROCUT V-30 The Challenger was manufactured in 2016. Ideal for precision machining, this vertical machining center ensures reliable performance. Consider the opportunity to buy this MICROCUT V-30 The Challenger vertical machining center. Contact us for more information.

This 3-axis MICROCUT V-30 Challenger was manufactured in 2014. It features a Heidenhain 530 control system and a high spindle speed of 18,000 rpm. The machine offers extensive axis travels with X-Axis at 1,200 mm, Y-Axis at 730 mm, and Z-Axis at 650 mm. With 25,915 machining hours, consider the opportunity to buy this MICROCUT V-30 Challenger machining center. Contact us for more information about this machine.

This MicroStep Fiber MSF 3001.15L was manufactured in 2017. It features a 3m x 1.5m cutting table, 4kW IPG YLS laser source, and a HighYag cutting head for perpendicular cuts only. It includes Donaldson extraction and filtration equipment and automatic layout planning software for flat sheets. Consider the opportunity to buy this MicroStep Fiber MSF 3001.15L fiber laser cutting machine. Contact us for more information.

This MicroStep Fiber MSF 4001.20L was manufactured in 2016. It features a 4m x 2m cutting table with hydraulic pallet changer, an automatic feeding tube cutting system for tubes up to 200mm diameter and 6m length, and a 4kW IPG YLS laser source. Includes Donaldson extraction and filtration equipment. Consider the opportunity to buy this MicroStep Fiber MSF 4001.20L fiber laser cutting machine. Contact us for more information.

General SKU314W627 MakeHosokawa Micron TypeTorus-Disc TDJS 1000-3.15 No.4056101000 Year of construction2001 LocationBarneveld Pressure Working pressure jacket3 Bar Extra information Max. temperature50 °C Main Features MaterialStainless steel Volume3375 Ltr. Motor11 KW Specified Features - Continuous dryer Torus-disc dryercheck Continuouscheck Capacitybruto 3375 l (netto 2000 l) Trough sizes1120 x 3150 mm InletDN400 ManholeDN500 inspection port OutletDN400 With jacketcheck Shaft can be heatedcheck Max. temperature50°C Motor11 kW (400 V, 1500 rpm) Speed mixing shaft20 rpm With jacketcheck Continuous dryers MaterialStainless steel 1.4301 (304) General Floorspace5,45 x 1,45 m Total height2,10 m Weight7500 kg Extra information Extra SpecificationsRotor:   - volume 107 l.   - working pressure 3 bar, design pressure 5 bar, test pressure 7 bar.   - wo ...

Quality scanner manufactured in 2014. This MICROTEC GOLDENEYE GLD 600 DSC is designed for the inspection of large boards and panels up to 1.8 meters in width. It integrates geometric, visual, and X-ray multi-sensor cameras to assess both external and internal properties of lumber, providing a comprehensive evaluation of material quality. If you are looking to get high-quality inspection capabilities, consider the MICROTEC GOLDENEYE GLD 600 DSC machine we have for sale. Contact us for further details.

This 5-axis Michael Deckel S22 was manufactured in 2005. It features a maximum grinding wheel diameter of 150 mm and a spindle speed range of 300 to 8000 rpm. The machine has a robust weight of 3800 kg and includes a cooling/filtration system from Transor Filter GmbH. If you are looking to get high-quality internal grinding capabilities, consider the Michael Deckel S22 internal grinding machine we have for sale. Contact us for further details.

Milling chuck, boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, universal drill head, boring tool, face head, facing and boring heads -Manufacturer: Komet microbore twinbore, milling heads, facing and boring heads with countersinking tool -Type: various designs, see photos -Comet: Type AB/VD 80 / AB/V 63x85 / AB/FZ 63 / AB/FZ 40 / AB/FZ 25 / FZ 32-100-3 / 2x AB/ISO 40x63x50 -Comet: Type AB/VD 63 / AB/VD 40 / AB/FZ 80 / AB/V 40x60 / AB/VD 50 / AB/V 25x60 / AB/VD 25 ... -twinbore: microbore MTP-75-1 / MTP-75-80 ... -Price/Fee: complete -Dimensions of transport case: 715/365/H210 mm -Total weight: 72 kg

Description MicroJet Slide Feeder MJ 45 A with MicroJet Conveyor Belt

General SKU374U1018 MakeHosokawa Micron Europe B.V. LocationBarneveld Type100 RV-4 Main Features MaterialStainless steel Volume10000 Ltr. Motor12 KW Specified Features - Conical mixer Conical mixercheck Capacity10.000 l Largest cone diameter3300 mm Cone height4935 mm Manhole2x With stainless steel armcheck Top drivecheck Motor11 kW + 1,1 kW (380 V) Bottom bearing pintle bearingRadial screw bearing Bottom discharge4x Dia. 125mm MaterialStainless steel 1.4301 (304) General No.101365/2310049 Year of construction1992 Floor space3,6 x 3,6 m Total height6,5 mStarchOther chemicalAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDiscountOther pharmaceuticsSugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicTea, herbs & coffeeConical mixersGeneric medicinesPowdered foodsHosokawa MicronIndustries > Food & Feed > StarchIndust ...

The CombiCut oxyfuel drilling system from Microstep offers a cost-effective alternative to high-performance laser cutting systems, especially for thicker sheets. Manufacturer: Microstep Model: CombiCut Year of Manufacture: 2022 Technical specifications: - Cutting area: 6000 x 2000mm - Drilling unit: 26.8 kW – up to M24, drilling up to 40 mm - Includes calibration unit for drilling tools - Includes tool changer (6-position – at the end of the table) - Filter system , suitable for indoor installation - Cutting thickness up to 150mm - Includes BG-compliant safety technology (light barrier) - Includes guided tours (S49) - The portal is driven on both sides for high precision. - Operating hours: 95 hours drilling, 587 hours oxy-fuel - Total hours: System switched on 5600 hours - No technology expansion possible - No CAM software required – the system is compatible with almost any C ...

This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information.

Horizontal turning machine manufactured in 2000. This MICROCUT SF 48/1000 features a maximum turning length of 1000 mm and a swing diameter over the slide of 240 mm. It includes a turret head with 8 tool positions and operates with a spindle speed of up to 4500 rpm. If you are looking to get high-quality turning capabilities, consider the MICROCUT SF 48/1000 machine we have for sale. Contact us for further details.

General SKU260Y295 LocationBarneveld MakeHosokawa Micron Pressure Working pressure0.2 Bar Working pressure jacket3 Bar Extra information Max. temperature200 °C Main Features MaterialStainless steel Volume380 Ltr. Motor15 KW Specified Features - Paddle dryer Paddle dryercheck Continuouscheck Capacity380 l./ 603kg/h Trough sizesDia. 400x3000 mm InletDia. 205 mm Manholecheck OutletDia. 205 mm With jacketcheck Shaft can be heated37l. , 1,3bar Max. temperature10-200°C Motor15kW, 400V, 720 rpm. Speed mixing shaft520 rpm. MaterialStainless steel 1.4306 (304L) With jacketcheck General Serial4140702000 TypeSJS 400-3.00 Year of construction2004 Floorspace4,5x1,5 m Total height1 m Weight5700 kg Extra information Extra SpecificationsPaddle dryer comes with gas-heated oil heater and oil pumps with valves: Brand: Ness Wärmetechnik GmbHType: WE 200Year: 2004Max.  ...

Manufacturer: MICROTEC Model No.: GOLDENEYE 600 Year: 2014 Condition: Used Stock number: 9397 The offer includes: MICROTEC touch panel Control cabinet Equipment: Technical documentation

This 11s STAR MICRONICS SV-38R type B was manufactured in 2015. It features a maximum turning diameter of 38 mm and a maximum headstock stroke of 350 mm. The machine is equipped with a FANUC Series 31i-MODEL B5 CNC control and offers rapid traverse speeds of up to 30 m/min. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SV-38R type B swiss-type CNC sliding-headstock automatic lathe we have for sale. Contact us for further details.

Used PRALINES production line: Producer: Aasted-Microverk APS. Model: 275 MINI for a cold stamp Year: 1996 (commissioning year 1997) The line used in 1997-2014 (2015) Description: forms: approx. 3500 items (molds are in different technical condition) Types of Forms: · Molds - number of places for pralines - 28: o "rectangular" forms 28 places for pralines (14 pralines, "violin" shape, 14 pralines each) trumpet shape) o "rectangular" forms 28 places for pralines (14 pralines, harp shape, 14 pralines each) shape "piano") o Molds in the shape of a "trunk" 28 places for pralines o "Small ball" shaped molds 28 places for pralines o "Big ball" forms 28 places for pralines o "Square" forms 28 places for pralines There are approx. 2500 items of this kind. · Molds - number of places for pralines - 56: o Forms "bears", "cats" 56 places for pralines (28 "bears", "cats" each)  ...

Manufacturer: MicroStep Type: SPL-PA 3001.15+S500 Working range: 3000 x 1500 mm + 500 mm shaft technology: plasma built in 2006 Kjellberg HiFocus 160i with autom. Gas console; (see PDF) 2 x additional quick-release co-buttons PerCut 170 Div. Wear parts Donaldson filter system including disassembly and delivery within Germany. Commissioning on request.

For sale is a complete frame sawmill as listed below. (Single sale also possible, please register in advance) An annual cut of up to 60,000 solid cubic metres of round timber is possible with the system. With a log length of 4 metres, the current annual cut is approx. 30,000 solid cubic metres in 1-shift operation. The facility is still in operation and can be visited by appointment. Machine Listing: 01. Log feed 4-strand SPRINGER with separator with roller conveyor with log turner with insert 02. Clamping carriage remotely controlled ESTERER Type: FHZ SV Built in 1990 Track width: 110 cm with auxiliary wagon with cabin 03. Frame saw ESTERER Type: HDS Built in 1973 600 stroke max. passage 71 cm with splitting wedge with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up 04. Frame roller conveyor Mayrhofer w ...

For sale: Micro Motion Mass Flow Sensor CMF010P323NB Order number: 8000.2 For more information, please call or send an email. Phone: 06-20758459 Email: wh.derikx@gmail.com The price is plus 21% VAT.

For sale: Micro Motion MASS flow sensor 1" Order number: 8000.22 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikx@gmail.com The price is exclusive of 21% VAT.

For sale:Micro Motion MASS flow sensor Type: CMF 200 ANSI 300 LBS Exclusive channel Order number: 8000.3 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikx@gmail.com The price is exclusive of 21% VAT.

Description Microjet height-adjustable, frequency-controlled suction belt table for addressing Length approx. 1600m inlet width approx. 85.cm

Key data: 760 mm, 430 mm, 450 mm

Inv. Num. : 6921 Type: VMCF-760 Producer: Microcut Created: 2007 Parameters: Control system: Fagor 8055 MC Work table length: 900 mm Work table width: 410 mm X-axis travel: 760 mm Y-axis travel: 430 mm Z-axis travel: 450 mm Cone: ISO 40 Machine weight: 3,300 kg

Inv. Num. : 7253 Type: MSF 9001.25Lr T500 Producer: Microstep Created: 2015, GO 2022 Parameters: Laser power: 10 kW Work table length: 9000 mm Work table width: 2500 mm Maximum sheet thickness when cutting (stainless steel): 25 mm Source: nLight CORONA-CFX-10000 Positioning speed: 130 m/min Laser head: Thermacut EX-TRABEAM-Pro-360 Machine height: 2570 mm Machine length: 23000 mm Machine width: 6000 mm Equipment: Technical Documentation Point Laser Sight Camera in the head Protective glass against lens contamination Remote support Adaptive Cutting Automatic alignment of sheet rotation LED Control Panel Automatic nozzle cleaning Calibration station Pallet Table Changer 2 Tables Intake segments under the grate 1x socket Automatic chip conveyor Automatic suction 2x Asper Licenses

Microcut Challenger MCV-2418 - CNC Machining Center - Fagor 0i-mc CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters Btl9ijraac - Year of construction 2005 Specification - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverses: 24 m/min - Speed working spindle: 8000 rpm - Tool holder: BT40 - Table size : 762 x 363 mm - Table load max.: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Inv. Num. : 7383 Type: AquaCut 3001.20WB Producer: MicroStep Created: 2016 Parameters: Control System: iMSNC Duty cycle: 35712 h Hours: 20646 h Work table length: 3000 mm Work table width: 2000 mm Equipment: Cutting head Drilling spindle

Inv. Num. : 6599 Type: MG 12001 25PrP Producer: Microstep Created: 2007 Parameters: Plasma source: 2x Fine Focus 800 (300 A) Portal width: 2500 mm Equipment: 3 burners Cable Automatic controller Cooling unit Incidentals

Manufacturer : Microm Model : HM 520 Condition : used Find more here - .ucymachines/ Contact us at - sales@ucymachines

Michael Deckel S0E Stylus Tool Grinding Machine, SOE Weilheim TOP Condition Total weight approx. 90kg Top grinding wheels with an outer diameter of up to max. 100mm are used Absolute top condition! Only one overhauled machine has a slightly superficial patina the bare metal parts. The pictures speak for themselves. The workshop dream in Reseda green :-) Plug with phase inverter

The MicroStep RS laser cutting machine is a high-performance fiber laser system designed for precision cutting of large-format materials. While specific details about the RS model are limited, it is likely part of MicroSteps MSF series, known for their modularity and adaptability to various industrial applications. --------------------------------------------------------------- Key Specifications - Working Area: Customizable; standard sizes range from 1,500 x 3,000 mm up to 2,500 x 12,000 mm. - Laser Power: Configurable from 1 kW up to 60 kW, depending on application needs. - Cutting Capabilities: - Mild Steel: Up to 25 mm thickness. - Stainless Steel & Aluminum: Up to 30 mm thickness. - Positioning Speed: Up to 180 m/min. - Repeatability: ±0.03 mm/m.​ Find more here - .ucymachines/ Contact us at - sales@ucymachines

A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioni ...