mh used for sale

Wilo High Pressure Centrifugal Pump Economy MHIE 203N-2/V/3-2-2G,G1/G1,0.75kW 4171765

8-color format: 70 x 100 cm<br><br><br><><<br>Verf Gbar: Instant

8 color size 70 x 100 cm<br><br><br><br>Available: immediately

The small laboratory press MHSP5 can perform very well with the round stamp (70 mm diameter) deformations of many materials. By delivering fine (0.5 mm per wheel revolution), deformations are carried out very accurately. Small punching or stamping operations are possible. The press is driven by a worm gear screw jacks, which requires minimal hand strength by high reduction ratio. The pressing frame consists of stable-dimensioned polyamide PA6G. Here are some technical data:-static force 5 KN (0.5 to) - portable presses frame made of polyamide PA 6 G, very stable design, with FEM program added - spindle manual jacks 20 mm, pitch 5 mm - with Handwheel diameter 120 mm and handle - gear ratio 1:10, per the Handwheel 0.5 mm screw - table size 235 195 mm - clearance width 190 mm - stamp size diameter 70 mm with 4 holes 8 mm for mounting a major stamp Very easy operation with spindle and w ...

Plate press - table press - Laboratory Press - Universal Press MHSP522 Press area 230 230 mm Clear width 200 mm Manual drive with worm gear screw jacks 5 KN Pressure 5 KN (0.5 tons) Weight 55 kg Per sensor revolution 0.5 mm path, this little manual force with great force, very fine deliverable. Pressing force is long maintained by self-locking.

Manual Heating Press Reitz MHSP5H - Manual Lifting Screw Press Static Press Force 5 KN (0.5 to) - Portable press frame made of polyamide PA 6G - Manual screw jack with spindle 20 mm, pitch 5 mm - With handwheel diameter 120 mm and handle - Gear reduction ratio 1 : 10, 0.5 mm spindle travel per handwheel revolution, thus only very little hand force required for high pressure. - Table size 100150mm - Clear width 60 mm - Punch size diameter 70 mm with 4 holes 8 mm to attach the Hotplate - Very easy operation due to spindle and worm gear - Total weight approx. 25 kg With 2 electric aluminum heating plates 1200 watts, heating area approx. 150 100 mm to 250°C, connection 230 V. With sensor and temperature control. Pressure-resistant insulating panels at the top and bottom for use in presses. Suitable for pressing, welding and gluing.

Technical data: Max height of 4,500 mm / 4,600 mm Maximum throat depth 4,500 mm / 4,000 mm Welding source ESAB, LCA1200 / ESAB TAF 1250DC Welding machine carrier 1 x without welding equipment broken demotiert Type: MH45. 2 / BODE DSCN 3109

XXL Large tire detwulster for OTR tires up to 1600 mm inner diameter! Mobile on rolling frame. Transport with unrolling tipper. Weight approx. 9500 kg, length approx. 6500 mm. Very good condition!

Machine Type: Milling Machine Manufacturer: MAHO Type: MH400P Year of manufacture: coming soon Condition: used / machine from training facility Price 4.750 Euro incl. 19% VAT Location Warstein , Germany Reference M-MAH-0225 DESCRIPTION We offer you a used milling machine from the manufacturer Maho. Stepless feed. TNC121 control overhauled. Machine is ready for use. Bellows / cover from the X-axis would have to be replaced. Available now. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Ribbon system Covema-Schwabe Y.O.M. 1994 User manual with functional overview - Machine control elements - Program overview - Commissioning and storing removal Reel MHM 2 - hydraul. Spreading (motor 1.5 kW / 1500 U) - hydraul. Pressure roller - with drive max. coil weight - 2 t Coil outside through. - 1650 mm Coil inner throughm. - 350 - 460 mm Bandwidth - 400 mm Feed machine VRMA 32/96 Bandwidth 320 mm Straightening roller sifm. - 40 mm, 7 pcs Straightening head can be done by hydraul. to open Intermediate air central. Controller more info on request

Yaskawa Robot Motoman MH180 7 axis, with a 16.6 m rail and table thta we are going to sell now 2018 ABB Kuka Yaskawa

Yaskawa Robot Motoman MH180 We have a Yaskawa Robot Motoman MH180 7 axis, with a 16.6 m rail and table thta we are going to sell now

MHME twin lane decorer / florette machine - used for broccoli In good working condition

GEBR. FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE MICH BITTE.

Brotschneidegatter, Fabr. MHS, model BM 45 NU

Key data: 13 KW

Manufacturer: Rexroth Model No.: MHD112C-035-PG3-BN 4000 min-1 Part No. 294649 IP: 65 13.3 kW 48 kg More engines new and used - you can find them in our shop! International shipping costs on request!

Key data: 250 mm, 1 t, 1200 mm

Sheet thickness max. 2 mm Largest belt width 250 mm Coil Outer Diameter 1200 mm Coil inner diameter 430 -550 mm Max. coil weight 2 x 1600 kg

Drawer module Transfer and centering module Interchangeable 2-point double gripper standard Robot Cell Data: Dimensions (L x W x H) 2500 x 2000 x 2373 mm Dimensions: 5000 x 3000 mm Operating voltage: 3 x 400 V, 50 Hz Control voltage: 24 V DC Power consumption: max. 1.5 kVA Technical data robot control: Type: FS100 Dimensions (H x W x D) 470 x 200 x 420 mm Cooling system: indirect cooling Interface: USB interface (2.0), RS232C and LAN (100 Base-TX710 Base-T)

Fully automatic bread slicer MHS Type: MHS BASIC L Technical data: Cutting Gate Bread Slicer Cutting thicknesses: 10 mm Bread passage: H 17 cm x W 45 cm x D 34 cm Bread rack to bag 230 Volt / 0.75 kW / 3 A Weight: 200 kg Total dimensions: H 114 cm x W 59.5 cm x D 73 cm Mobile on 4 pulleys with 2 brakes Cuts almost all types of bread (including yeast braids) Soft feed for particularly gentle cutting Lubrication without oil pump Minimal maintenance costs due to high ease of maintenance Simply click out the used felt and dispose of it The new felt is simply hooked into the existing guide Year of Make: 2015 Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

Bread cutter Creel cutting machine floor model Model: MHS BM 45 N Cutting thickness 10 mm max. bread dimensions: approx. 440 x 310 x 160 mm, WxDxH Automatic Controls with crumb drawer at the bottom Stainless steel version, knife lubrication with original Teflon special knife Machine mobile with brake DGUV V3 tested Connection 400V, 1500 Watt, 16A-CEE plug Dimensions: 600 x 750 x 1100 mm, WxDxH Used machine cleaned 3 Months Warranty + Service Package Option: Maintenance contract Many more bread slicers in stock!

Key data: 273 m², 5000 kg, 7300 mm

Volume flow 25,000 m3/h Exhaust fans 2x

MAHO Milling Machine MH400 - Mounting SK40 - With digital display - Brake motor for work spindles: 2.2 kW - X-axis: 400 mm - Y-axis: 375 mm - Z-axis: 250 mm - Width: 150 cm - Depth: 120 cm - Height: 180 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Offer 24467 Specifications: - Max. pressing force 10 t - Max. ram stroke approx. 550 mm - Tool holder thread M 16 - Stand width approx. 1000 mm - Stand depth approx. 500 mm - Min. / max. installation height 450 / 1350 mm - Height-adjustable table - Space requirement approx. W 1600 x H 2650 x D 850 mm - Weight approx. 350 kg

MIG/MAG hose package -MIG/MAG hose package: water-cooled -Length: 3.0 m -Weight: 3.1 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Holch MHS 501-Super water-cooled -Length: 6.35 m -Weight: 5.1 kg

Offer 24482 Specifications: - Max. working width 1020 mm - Max. material thickness 4.0 mm - Cutting angle 2.4 ° - Single stroke – continuous stroke can be preselected -one. Back gauge up to 700 mm - Front angle stop - Front pull-out sheet metal support - Drive 400 V / 3.4 kW - Space requirement approx. W 1450 x H 1180 x D 1400 mm - Weight approx. 900 kg

clamping force: 4.000 kN injection volume: 4.000 cm³ screw diameter: -- mm platen size: 800 x 710 mm Condition: used, Specification: Rubber Injection Molding Machine - second-hand clamping unit: - Clamping force: 4000 kN - heating platen size: 800 x 710 mm - ejection device: 2-layer Injection unit: - Injection volume max.: 4,000 cm³ - Original screw 1005.10.008 B/c The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MHG pressure blasting machine SMG 100-100 incl Dust Extractor 1703-1,5

sheet width: 125 mm coil weight: 2x 0,8 t coil internal dia.: 300-500 mm coil outside dia.: 1200 mm weight of the machine ca.: 0,7 t dimensions of the machine ca.: BxTxH 2000x2000x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 8 Nm volt: 0 V ampere: 6,3 A total power requirement: kW weight of the machine ca.: 10 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single pass - progressive honing machine, SUNNEN MHS 840 (like VSS 84), overhaul and electronic retrofit (see video and photos), 4 heads, 8-station rotary table This machine can be inspected under power in our warehouse Test run possible M i m u Machine Tools Gussago BS Italy, Single-pass honing is a type of honing process used for finishing internal cylindrical surfaces, where a tool with a fixed set of abrasive stones passes through the bore only once to achieve the desired surface finish and dimensional accuracy. In this process, the tool is typically designed with a specific shape and size, allowing for precise material removal in a single stroke

Format: 16 x 33 x 0.8 mm Model MHUD-PET 2500 Pieces / Box 3 boxes in stock

Magazine Tubes MHUD 13 x 33 x 0.6 mm for PP strapping 2500 Pieces / Box 14 boxes in stock

Magazine tubes for PET strapping Format: 16x33x0.6 mm 2500 Pieces / Box 6 boxes in stock

Manufacturer: Homag CPU , Type: SPS II 12 MHz 1MB RAM, Serial number: 2-083-01-5044,

Robot Yaskawa Motoman MH50 DX100 complete Control: DX100 Max. load capacity: 50 kg Max. working range: approx. 2061 mm Scope of delivery: robot,control,cable,teachpanel,operating instructions,circuit diagrams 2 weeks commissioning warranty. No further warranty In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Freely loaded / ex works.

ID3550 Caterpillar MH3024 year/Baujahr 2015 approx. 12500 hours/hours Material handlers with 4 outriggers, elevating cabin, HGT grab 600 liters (built in 2021) Material handler with 4 outriggers, elevating cab, HGT grab 600 litres (built in 2021)

Weighing unit with 24 weighing heads for very precise weighing, with 1 Liter volume each. Special design for weighing 4 or 6 different products simultaneously and then merging them or to weigh one product in high speed. Optional for extra charge: CAN bus protocol for higher speed. - Specifications: max. speed of the machine in neutral: 50 cycles/minute (with 4 - 6 products simultaneously) | weight range per product for 6 products: 1-200g | accuracy +/- 0.5-1.5g | PLC controlled, operating via 10 Touchscreen (operation menu in English) | stainless steel 304 | IP65 | 220V/2,5kW, 15A | machine dimensions: L2630xW1700xH1815mm | weight: 1200kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task ...

Weighing heads: 10, max. weighing capacity: 6500g, individual weighing capacity: 10g-800g, scale volume: 1600ml, max. capacity: 70/min, number of programs: 100, dimensions X/Y/Z: approx. 1100mm/1100mm/1350mm, weight: approx. 330kg. The multihead weigher is sold as a complete system including accessories, peripherals and spare parts. Documentation available.

Weighing unit with 18 (2x9) weighing heads for very precise weigh checking, with 1.0-Liter volume each. Special design to mix two different products or to weigh one product in high speed - Specifications: max. speed of the machine in neutral: 100 (or 2x50) cycles/minute | weighing range: 10-1000g | accuracy: +/- 0.1-2.0g | touchscreen (large version) operation | stainless steel | 220V, 2.8kW | L1736xW1536xH1428mm, 900/950kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible.  ...

Measuring range X/Y/Z: 440mm/700mm/410mm, measuring uncertainty X/Y/Z: 2.5+3.9L/1000µm, probing deviation (MPEp): 3µm. Acceleration: 1730mm/s², traversing speed: 350mm/s, max. table load: 200kg, working temperature range: 19°C-21°C, operating temperature range: 13°C-35°C, air consumption: 21l/min, weight: approx. 400kg, control: Hexagon PC-DMIS. Documentation available. The coordinate measuring machine must be recalibrated.