mez brno used for sale

Emulsion pump, coolant pump MEZ BRNO 3COA2-22 Immersion depth: 220 mm Pump base: Ø 100 mm pump flange: Ø 130 mm Q: 0,42 l/s ( 25.2 l/min ) 220 - 254 / 380 - 440 V 3AC 50 Hz IP44 used, tested ! Dimensions: 370 x 190 x 130 mm

Emulsion pump, coolant pump, with tank MANSFELD MHR-1 Pump: MEZ BRNO 2COA2-22 PO Immersion depth: 220 mm Pump base: 100 mm Flange: 130 mm Q: 63 l / min ( 1,1,min 05 l/s ) P: 0.16 atp ( 0.16 bar ) Engine: 0.16 kW ( 160 watts ) 220 - 254 / 380 - 440 V 3AC 50 Hz tank with oil separator and dirt filter usable tank volume: approx. 6.3 l used, tested ! Dimensions: 440 x 160 x 410 mm

2 MEZZERA high temperature jiggers type Celsius 143, year 2003, roller width 200 cm, working width 180 cm, electronic jigger, maximum batch diameter 1150 mm, maximum dyeing temperature 140 ºC, SETEX 838 dye cycle controller, with 2 add vats (1 with mixer)

- 6 heads - Formats: Ø 67 mm - Very few operating hours - Very good condition Dimensions: - Length: 2000 mm - Width: 1250 mm - Height: 2750 mm

Remote control, machine control, regulator CET BRUMOV DR 20 ( DR20 ) with 9.0 m cable used, tested ! Dimensions: 250 x 120 x 120 mm

Sewing machine switch with sewing light CET KROMPACHY POS 8 P1 2,0 A 380 V 3AC 50 Hz Sewing light: 24 V AC IP 50 used, tested ! Dimensions: 290 x 160 x 140 mm

Sewing machine switch with sewing light CET KROMPACHY POS 3 P1 2,2 A 380 V 3AC 50 Hz Sewing light: 24 V AC IP 50 used, tested ! Dimensions: 290 x 160 x 140 mm

Stepper motor MEZ NACHOD, ZSE PRAHA Type Z42RS145 1.88 Nm 1.8 degrees/step 7.0 A 830 Hz Flange: 95 x 95 mm Shaft: Ø 8 / 9 mm New Dimensions: 180 x 95 x 120 mm

PTO, cardan shaft -Admission: 1 3/8 6 teeth (Ø 35 mm) -Length: 80-100 cm -They are suitable for fertilizer spreaders, field sprayers, band or circular saws, forestry winches, wood splitters, hay tedders, rotary rakes, loading wagons and many other units -Number: 10x PTO shafts available -Price: per piece -Weight: 16 kg/piece

Electric motor, three-phase motor -Manufacturer: ZSE MEZ, electric motor type 4AP80-4s -Power: 0.55 kW -Speed: 1380 rpm -Shaft: Ø 19 x 40 mm -Design: B5 -Protection rating: IP44 -Dimensions: 265/200/H210 mm -Weight: 10.1 kg

Electric motor, three-phase motor -Manufacturer: ZSE MEZ, electric motor type 4AP90s-6 -Power: 0.75 kW -Speed: 940 rpm -Shaft: Ø 24 x 50 mm -Type: B5 -Protection class: IP 54 -Dimensions: 290/175/H210 mm -Weight: 14 kg

Centrifugal fan, centrifugal fan, centrifugal fan with drive function MEZ MOHELNICE 4AP71-2 impeller: Ø 140 mm Connections: Ø 90 / 130 x 70 mm motor : 0,, 55 kW 220 / 380 V 2820 rpm shaft diameter: Ø 14 mm diameter V-belt pulley: Ø 69 / 51 mm IP54 used, tested ! Dimensions: 430 x 280 x 270 mm

Emulsion pump, coolant pump CET BRNO 2COA2-12 PO Immersion depth: 120 mm Pump base: Ø 100 mm pump flange: Ø 130 mm Q: 40 l/ min p: 0,0,2 atm ( 1,18 bar ) 0,14 kW 220 / 380 V 3AC used, tested ! Dimensions (pump only): 290 x 170 x 130 mm Dimensions (packaging): 390 x 230 x 130 mm

Electric motor, three-phase motor -Manufacturer: ZSE MEZ, electric motor type 4AP90s-4 -Power: 1.1kW -Speed: 1410 rpm -Shaft: Ø 24 x 50 mm -Protection class: IP 44 -Dimensions: 290/175/H210 mm -Weight: 12.3 kg

Emulsion pump, coolant pump CET BRNO 2COA2-22 P0 Immersion depth: 220 mm pump base: Ø 100 mm pump flange: Ø 130 mm Q: 63 l/ min p: 16 kPa ( 0,0,16 bar ) motor: 0.16 kW ( 160 W ) 220 - 254 / 380 - 440 V 3AC 50 Hz used, tested ! Dimensions: 390 x 150 x 130 mm

Electric motor, three-phase motor -Manufacturer: MEZ, electric motor from milling machine TOS FB25-V -Type: AP 90 L / 4 -Power: 1.5 kW -Speed: 1430 rpm -Shaft: Ø 24 x 50 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 325/260 / H175 mm -Weight: 26 kg

Emulsion pump, coolant pump, with tank CET BRNO 2COA2-17 PO Immersion depth: 170 mm Pump base: 100 mm Flange: 130 mm Q: 63 l / min P: 16 kPa ( 0,16 bar ) Engine: 0,16 kW 220 - 254 / 380 - 440 V 3AC 50 Hz Tank volume ( total ): approx. 30 l usable volume: approx. 25 l used, tested ! Dimensions: 530 x 305 x 440 mm

emulsion pump, coolant pump, with tank, mobile CET BRNO 3COA2-12 PO Immersion depth: 120 mm Pump base: 100 mm Flange: 130 mm Q: 25,2 l / min ( 0.42 l / s ) engine: 220 - 254 / 380 - 440 V 3AC 50 Hz 0.4 - 0.5 / 0.23 - 0.29 A tank volume: approx. 20 l Chassis: 2x fixed castor, 1x swivel castor, without brake used, tested ! Dimensions: 520 x 390 x 670 mm

Emulsion pump, coolant pump, with tank CET BRNO 3COA2-22 PO Immersion depth: 220 mm Pump base: 100 mm Flange: 130 mm Q: 25,0 l / min ( 0.42 l/s ) P: 40 kPa ( 0.4 bar ) motor: 220 - 254 / 380 - 440 V 3AC 50 Hz 0.4 - 0.5 / 0.23 - 0.29 A tank with oil and dirt separator usable Tank volume: approx. 30 l used, tested ! Dimensions: 460 x 410 x 430 mm

Emulsion pump, coolant pump, without pump housing CET BRNO 2COA2-22 P0 Immersion depth: 220 mm Pump base: Ø 100 mm Pump flange: Ø 130 mm Q: 25 l/ min p: 40 kPa ( 0,4 bar ) motor: 0.16 kW ( 160 W ) 220 - 254 / 380 - 440 V 3AC 50 Hz used, tested ! Dimensions: 375 x 170 x 130 mm

Emulsion pump, coolant pump CET BRNO 2COA2-22 P1 Immersion depth: 220 mm Pump base: Ø 100 mm pump flange: Ø 130 mm Q: 30 l/ min p: 0,0,16 atü ( approx. 1.14 bar ) 0.16 kW 220 - 254/ 380 - 440 V 3AC 50 Hz used, tested ! Dimensions: 390 x 170 x 130 mm

Electric motor, three-phase motor -Manufacturer: MEZ, electric motor from milling machine TOS FB25-V -Type: AP 132S / 4 -Power: 5.5 kW -Speed: 1460 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP44 -Dimensions: 490/350 / H300 mm -Weight: 73 kg

Emulsion pump, coolant pump CET BRNO 2COA2-12 PO Immersion depth: 120 mm Pump base: Ø 100 mm pump flange: Ø 130 mm Q: 63 l/ min p: 0,,16 at ( approx. 1.14 bar ) 0.16 kW 220 - 254 / 380 - 440 V 3AC 50 Hz New ! Dimension: 290 x 165 x 130 mm

Electric motor, three-phase motor -Manufacturer: MEZ, electric motor type 2AP90S-4 -Power: 1.1 kW -Speed: 1400 rpm -Shaft: Ø 24 x 50 mm -Construction: B14 -Protection class: IP 44 -Dimensions: 300/220/H173 mm -Weight: 13.7 kg

Emulsion pump, coolant pump CET BRNO 2COA2-27 P0 Immersion depth: 270 mm Pump base: 100 mm Flange: 130 mm Q = 25 l/min 220 / 380 V New ! Dimensions: 440 x 130 x 170 mm

Electric motor, three-phase motor -Manufacturer: ZSE MEZ, electric motor type 3APJC90S-4 -Power: 0.55 kW -Speed: 1410 rpm -Shaft: Ø 24 x 50 mm -Construction: B14 -Protection class: IP 44 -Dimensions: 333/173/H210 mm -Weight: 14.1 kg

Electric motor, three-phase motor -Manufacturer: ZSE MEZ, electric motor type 3APJC80-2 -Power: 0.55 kW -Speed: 2890 rpm -Shaft: Ø 19 x 40 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 310/165/H195 mm -Weight: 12 kg

Emulsion pump, submersible pump, coolant pump CET BRNO 3COA10X-27 P1 Immersion depth: 270 mm Pump base: 140 mm Flange: 190 mm Q = 1.67 l/s Engine: 300 W 220 / 400 V New Dimensions: 450 x 190 x 200 mm

emulsion pump, submersible pump, coolant pump CET PRAHA 4AP71-2S Immersion depth: 270 mm pump base: 140 mm flange: 180 mm 220 / 400 V New ! Dimensions: 550 x 180 x 210 mm

Three-phase motor, electric motor -Power: 0.55 kW -Speed: 1380 rpm -Shaft: Ø 19 mm -Construction: B3/B5 -Protection class: IP54 -Dimensions: 265/200/H215 mm -Weight: 10.4 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2910 rpm -Shaft: Ø 38 x 80 mm -Construction: B3 -Protection class: IP44 -Price: per piece -Number: 3 pieces -Dimensions: 470/345/H260 mm -Weight: 75 kg

Emulsion pump, submersible pump, coolant pump CET PRAHA 4AP71-2S Immersion depth: 270 mm pump base: 140 mm flange: 180 mm 0.37 kW 220 / 380 V used, tested ! Dimensions: 530 x 180 x 210 mm

Three-phase motor, electric motor -Drive motor of: a VEB SIP315x500 cylindrical grinding machine -Power: 1.5 kW -Speed: 935 rpm -Drive shaft: 28 x 60 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 360/250/H250 mm -Weight: 27 kg

Emulsion pump, coolant pump CET BRNO 3COA2-12 Immersion depth: 120 mm Pump base: Ø 100 mm pump flange: Ø 130 mm Q: 25 l/ min Engine: 90 W 220 - 254 / 380 - 440 V 3AC IP44 New, with documents ! Dimensions: 270 x 160 x 130 mm Dimensions ( packaging ): 300 x 160 x 190 mm

Emulsion pump, submersible pump, coolant pump CET BRNO 3COA10X-27 P1 Immersion depth (with / without intermediate flange): 200 / 270 mm Pump base: 140 mm Flange diameter: Ø 190 mm Q = 1,67 l/s Engine: 300 W 220 / 400 V used, tested ! Dimension: 450 x 370 x 190 mm

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1435 rpm -Shaft: Ø 22 x 50 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 365/290/H250 mm -Weight: 37 kg

Emulsion pump, submersible pump, coolant pump CET BRNO 3COA10X-35 P1 Immersion depth: 350 mm Pump base: 130 mm Flange diameter: Ø 180 mm Q = 1,67 l/s Engine: 310 W 220 / 400 V used, tested ! Dimension: 530 x 300 x 180 mm

Separating clutch, controllable gear motor, variable speed gear motor, electric motor -Rapid traverse: for lathe Gearbox manufacturer: SITI type MI 60 FP -Motor manufacturer: MEZ type 4AP71-4 -Motor power: 0.37 kW -Speed range: 1-100 rpm -with control: -Brake and clutch: 24 V -Drive shaft: Ø 28 mm -Construction: B5 -Number: 1 piece of motors available -Price: per piece -Dimensions: 510/400/H270 mm -Weight: 35 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 950 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP 54 -Number: 6x available -Price: per piece -Dimensions: 420/320/H225 mm -Weight: 41 kg

Emulsion pump, coolant pump, gear pump CET BRNO, ELEKTRA 4CZB 05G Mounting depth: 50 mm Pump flange: Ø 130 mm Q: 0,015 l/s ( 0.9 l/min ) P: 300 kPa ( 3.0 bar ) motor: 0.08 kW 220 - 254 / 380 - 440 V 3AC IP54 New ! Dimension: 375 x 165 x 130 mm

Electric motor, three-phase motor -Power: 1.5 kW -Speed: 710 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 420/320/H225 mm -Weight: 41 kg

Electric motor, three-phase motor -Drive motor for: milling machine TOS KURIM FC50H -Power: 15 kW -Speed: 1445 rpm -Shaft: Ø 42 x 110 mm -Construction: B3/B5 -Protection class: IP 44 -Dimensions: 630/348/H410 mm -Weight: 153 kg

Emulsion pump, coolant pump CET BRNO 2COA2-12 PO Immersion depth: 120 mm Pump base: Ø 100 mm pump flange: Ø 130 mm Q: 25 l/ min p: 40 kPa ( 0,0,4 bar ) 220 - 254 / 380 - 440 V 3AC used, tested ! Dimensions: 290 x 210 x 160 mm

Electric motor, three-phase motor -Manufacturer: MEZ, electric motor type 2AP71-2s -Power: 0.37 kW -Speed: 2780 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 / B14 -Protection class: IP 44 -Number: 3 motors available -Price per piece -Dimensions: 205/152 / H180 mm -Weight: 6.2 kg/pc.

Emulsion pump, coolant pump ELEKTRO NASOSOV ( ? ? ) PA - 22 ( - 22 ) Immersion depth: 100 - 190 mm ( infinitely adjustable ) Pump base: 166 x 125 mm Pump flange: Ø 180 mm bolt circle diameter: Ø 160 mm hole diameter: Ø 9,5 mm motor: 0.12 kW 2800 rpm 220 / 380 V 3AC IP44 used, tested ! Dimensions: 400 x 200 x 180 mm

Emulsion pump, coolant pump CET BRNO 2COA2-17 P1 Immersion depth: 125 mm ( measured ) Pump base: Ø 100 mm pump flange: Ø 130 mm Q: 25 l/ min p: 40 kPa ( 0,4 bar ) 220 - 254 / 380 - 440 V 3AC 50 Hz used, tested ! Dimensions: 290 x 210 x 140 mm

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 950 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: IP 44 -Number: 2x available -Price: per piece -Dimensions: 420/320/H230 mm -Weight: 42 kg

Emulsion pump, coolant pump CET BRNO 2COA2-17 PO Immersion depth: 170 mm pump base: Ø 100 mm pump flange: Ø 130 mm Q: 25 l/ min p: 40 kPa ( 0,0,4 bar ) 220 - 254 / 380 - 440 V 3AC used, tested ! Dimensions: 340 x 210 x 130 mm

Three-phase motor, electric motor -Power: 3 kW -Speed: 1420 rpm -Shaft: Ø 28 x 55 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 390/297/H250 mm -Weight: 40 kg

Emulsion pump, coolant pump CET BRNO 2COA2-17 PO Immersion depth: 170 mm pump base: Ø 100 mm pump flange: Ø 130 mm Q: 25 l/ min p: 40 kPa ( 0,0,4 bar ) 220 - 254 / 380 - 440 V 3AC used, tested ! Dimensions: 340 x 200 x 130 mm