metal used for sale

Baking sheet Cleaning maschie sheet metal plastering machine Ullmann -for sheet metal 60x40cm edges on the short side -for sheets 58x78cm edges on the long side -400 volts

metal band saw blade, band saw blade, metal saw band -unused original packaging -Number: 10x sheets available -Price per piece -Toothing: 5 -Dimensions: 3660 x 26 x 1.1mm -Weight: 0.7kg/pcs

sheet metal cleaning machine from Schlee. The machine was built in 2011. Sheets up to 58 cm wide are suitable. Schlee sheet metal cleaning machine Type: Uni-58 Built in 2011 for sheets up to 58 cm wide cleans / brushes oiled mobile on wheels m. fixed Stainless steel More information on request. Dimensions: Height: approx. 115 cm Width: approx. 150 cm Depth: approx. 89 cm

• DIBAL MD-3500 600X400 reject metal detector. Designed with ease of operation, low maintenance and cost. • Metal detectors are considered a critical control point (CCP) in HACCP programs and require detection checks to make sure they meet their standards. Smart Guide conducts detection and operation checks in an easy-to-understand format. It can be configured to stop operation if the test fails and ensures compliance. • Confirmation of rejection Contaminated products must not only be detected but also properly rejected. Rejection confirmation ensures that rejected products are completely removed from the production line. • Detection arch measurements: 600 mm wide x 240 mm high x 460 mm wide. • External dimensions of the machine: 2040 mm long x 1100 mm wide x 1600 mm high. • Ribbon size: 2040 mm long x 500 mm wide (hinges) •OCCASION. NEGOTIABLE PRICE. Transport costs ...

Loma Metal Detector Type: IQ2 Year of construction 2007 digital control Stainless steel cladding with conveyor belt with ejection (products where metal pieces are in it, are expelled) CE plug Link to bread systems or other lines Compressor closure used with signs of use Height: 117cm Width: 160cm Depth: 100cm

Metal Detector Loma Systems EMC90541-14363 -Metal detector -Manufacturer: Loma Systems -Weight 185cm -Inlet tunnel: 35cm wide and 11.5cm high -380 Volt 3OPh 50Hz

REF-0 FORTRESS PHANTOM PIPELINE METAL DETECTOR Metal detector for the inline inspection of pumped liquids and viscous products Manufacturer: FORTRESS Model: PHANTOM Year: 2011 Inside pipe diameter: 95mm. Overall dimensions: width 900mm, length 800mm, height 1,200mm.

REF-2352 CEIA THS METAL DETECTOR WITH REJECTION SYSTEM Metal detector with rejection system manufactured by CEIA Model: THS Serial no.: 20400245012 230V / 50-60Hz / 1KVA Tunnel dimensions: width 350mm, height 220mm Overall dimensions: width 1,150mm, length 2,100mm, height 1,300mm

Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin  ...

Metal plaster KD for 98cm sheets - Sheet metal cleaning machine brush machine - suitable for 98cm sheets with 2 edges Margins on the short side - mobile on wheels - 380 volts

Thermo Scientific Apex 500 metal detector (450x260mm)-Ref.8746 Width: 850 mm Height: 1400 mm Length: 2260 mm Brand: Thermo Scientific Model: Apex 500 Manufacture year: 2018 The Thermo Scientific Apex 500 metal detector offers unprecedented sensitivity allowing you to comply with your legal obligations and protect your brand. It features an innovative touch screen that streamlines installation and optimizes configuration with minimal training, thus reducing downtime in production. Clearance dimensions - Width: 450 mm - Height: 260 mm Conveyor width: 400 mm

Sheet metal cleaning machine KD plaster for 78cm sheets - Metal cleaning machine for 2 edge sheets - Margins on the short side - for 58x78cm sheets - 400 volts - mobile on wheels

Sheet metal deburring machine Manufacturer: ERNST Type: EM5/N900 Year of construction: 1999 Control type: conventional Working width: 880 mm Workpiece height: 1-70 mm Grinding drum diameter: 420 mm Machine weight approx.: 2,800 kg Dimensions approx.: 2,500 x 1,715 x1,675 mm automatic sheet metal deburring machine working in wet grinding process automatic magnetic filter system Wet sanding device Washing and drying facilities Maglev width: 200 mm Minimum length of small parts: 80 mm

Metal powder alloy CASTOLIN ROTOTEC LUBROTEC 19985 medium-hard, highly machinable metal powder alloy Quantity: 1.2 kg Dimensions: 90 x 90 x 130 mm

Sheet metal gripper, sheet metal clamp TAKRAF K4MP 4000 kg gripping range: 0 - 32 mm used, tested ! Dimensions: 460 x 200 x 90 mm Weight: 14.5 kg

Sheet metal clamp, sheet metal gripper TAKRAF KBH 3 ( KBH3 ) 3200 kg Gripping width: 12 / 70 mm used, tested ! Dimensions: 470 x 230 x 100 mm

Sheet metal clamp, sheet metal gripper, lifting clamp TAKRAF KR 1 ( KR1 ) Load capacity: 1 t ( 1000 kg ) Gripping range: 0 - 20 mm used, tested ! Dimensions: 530 x 180 x 170 mm

Sheet metal gripper, sheet metal clamp PAGUS 2000 kg Gripping range: 0 - 32 mm used, tested ! Dimensions: 330 x 190 x 100 mm Weight: 10 kg

Sheet metal clamp, sheet metal gripper, lifting clamp TAKRAF K 4 ( K4 ) Load capacity: 4 t ( 4000 kg ) Gripping range: 25 - 51 mm used, tested ! Dimensions: 480 x 110 x 215 mm

Sheet metal clamp, sheet metal gripper, lifting clamp TAKRAF K 4 ( K4 ) Load capacity: 4 t ( 4000 kg ) Gripping range: 0 - 32 mm used, tested ! Dimensions: 450 x 100 x 260 mm

Sheet metal gripper, sheet metal clamp PAGUS 3000 kg Gripping range: 0 - 32 mm used, tested ! Dimensions: 400 x 190 x 120 mm Weight: 14 kg

Sheet metal clamp, sheet metal gripper PAGUS KBH 1 ( KBH1 ) 1000 kg Gripping width: 10 / 25 mm used, tested ! Dimensions: 300 x 220 x 130 mm Weight: 5 kg

Sheet metal gripper, sheet metal clamp TAKRAF MLK 4000 kg Gripping range: 25 - 51 mm used, tested ! Dimensions: 560 x 200 x 110 mm Weight: 18 kg

Sheet metal clamp, sheet metal gripper TAKRAF 1600 kg Gripping range: 0 - 30 mm used, tested ! Dimensions: 330 x 300 x 75 mm Weight: 13 kg

Sheet metal clamp, sheet metal gripper TAKRAF KBH 1600 kg Gripping range: 0 - 32 mm used, tested ! Dimensions: 380 x 260 x 140 mm Weight: 10 kg

Sheet metal clamp, sheet metal gripper, lifting clamp TAKRAF KSR 4 ( KSR4 ) Load capacity: 4 t ( 4000 kg ) Gripping range: 3 - 30 mm used, tested ! Dimensions: 470 x 150 x 225 mm

Sheet metal clamp, sheet metal gripper TAKRAF KBH 1 ( KBH1 ) 1000 kg Gripping width: 40 mm used, tested ! Dimensions: 220 x 190 x 130 mm Weight: 6 kg

Sheet metal clamp, sheet metal gripper TAKRAF Gripping width: 25 / 100 mm used, tested ! Dimensions: 370 x 320 x 190 mm

Sheet metal clamp, sheet metal gripper TAKRAF KBH 2 ( KBH2 ) 2000 kg Gripping range: 0 - 50 mm used, tested ! Dimensions: 230 x 220 x 150 mm Weight: 10 kg

Metal powder alloy CASTOLIN ROTOTEC EXOTEC 29904 exothermic reacting metal powder alloy as primer for all ROTOTEC applications Quantity: 1kg New ! Dimensions: 90 x 90 x 130 mm

Pneumatic metal saw, pneumatic saw, metal hand saw SPITZNAS, BAIER DHS 1 99037 saw blade diameter: 175 mm cutting range: 50 mm mount saw blades: Ø 32 H7 with claw coupling used, tested ! Illustration may differ ! Dimensions: 570 x 190 x 130 mm

Metal flange, 4 pieces CKD S1-FA-40 for pneumatic cylinders of the series SCA2 / JSC3 / USC piston diameter: Ø 40 mm Other quantities on request ! New ! Dimensions ( single metal flange ): 100 x 57 x 12 mm Dimensions ( packaging ): 100 x 80 x 50 mm

Inv. Num. : 5464 Type: 1250x1.2 Producer: China Created: 2014 Parameters: Maximum sheet thickness when cutting: 1.2 mm Maximum length of sheet plate: 1250 mm Equipment: 7-cylinder sheet metal straightening machine 2 knives for longitudinal cutting Unwinding and rewinding of sheet metal

Metal band saw blade, band saw blade, metal saw band -Quality: unused. Original packaging -Price: per piece -Number: 7x sheets available -Dimensions: 3660x25x0.9 mm -Weight: 1.0 kg/piece

Metal band saw blade, band saw blade, metal saw band -Quality: unused, original packaging -Toothing: 3/4 K-POS -Price: per piece -Number: 11x sheets available -Dimensions: 3830x27x0.9 mm -Weight: 0.8 kg/piece

Metal band saw blade, band saw blade, metal saw band -unused in: original packaging -Dimensions: 2625 x 20 x 0.9 mm -Toothing: 6/10 ZpZ W -Price: per piece -Number: 7 pieces -Weight: 0.4 kg/piece

Metal band saw blade, band saw blade, metal saw band -Condition: unused -Price: per piece -Number: 5x sheets available -Toothing: 5-8 -Dimensions: 4500 x 34 x 1.10 mm -Weight: 1.3 kg/piece

Metal band saw blade, band saw blade, metal saw band -Condition: unused -Price: per piece -Number: 3x sheets available -Toothing: 8-12 ZpZ -Dimensions: 2950 x 27 x 0.90 mm -Weight: 0.9 kg/piece

Sheet metal storage, 19 cassettes, TwenTower SL, Storemaster, format 2500x1250mm – used - : Price from location: 23.500.-€ (net)! Manufacturer: Storemaste Type: TwenTower-SL MF 19 Year of construction: 2013 Specifications 19 cassettes Pull-out walls can be swivelled in Permissible drawer load: 1.9 tons. Max. sheet metal package height: 50mm Shelving grid: 100mm System height: 2,385mm Top drawer: 2,100mm System width: 3,250mm System depth opened: 3,100mm System depth closed: 1,850mm System weight: 3.769kg Current new price: approx. 32.000.-€ (net)! Condition: good – very good Available: now Location: 79379 Müllheim

CEIA THS optimizes sensitivity to all metal contaminants while minimizing product effect across a wide range of products. It employs an autolearn function that explores a spectrum of frequency bands to determine the best operating conditions, achieving high performance levels for detecting magnetic and non-magnetic metals. The metal detector has a compact and robust construction, high immunity to environmental interference, and is suitable for a wide range of industrial applications. Equipped with product ejection system which uses compressed air stream. Gate dimensions: W: 450mm x H: 250mm Total dimensions: L: 2200mm x W: 1400 x H: 1800mm

Pharma Technologies model PH4 Pro2LF combined deduster/metal detector for pharmaceutical tablets & capsules. High quality construction in mirror polished 316 grade stainless steel. 250mm dia x 75mm widevibratory perforated uphill spiral track 500mm high. Tablet discharge directly into Safeline metal detector scanning head. Flow to dishcharge outlet/reject outlet. The machine is mobile on castors.

Used Pedrazzoli SUPER BROWN SPECIAL Sheet metal machine The machine is mainly made up of: – Sheet metal pedestal. – Swivel head support ring to allow inclined cuts. – Pneumatic vice with locking handwheel equipped with anti-burr. – Machine base in cast iron. – Head with crown screw reduction. TECHNICAL DATA Three-phase motor 2 speed kW 0.75 ÷ 1.1 Blade holder shaft revolutions n/1 3 7 ÷ 7 4 Maximum blade diameter 250 mm. Minimum blade diameter 200 mm. Maximum vice opening 110 mm. Jaw height 60 mm. Refrigerant pump flow rate (m 1 head) 22 litres. Tank capacity 3 litres. Dimensions: B x H x D – 520 x 1770 x 1130 mm. Weight 150 kg

Working length: 3,050 mm Cutting capacity: 6 mm steel 4 mm stainless steel Backgauge range: 1,000 mm Cutting angle adjustment: 0.5 - 2.5 degrees Equipped with: - 4x sheet metal support arms - Foot pedal - Sheet metal holding device at the back - Safety light curtain at the back Country of origin: Italy Motor power: 7.5 kW Machine LxWxH: 3,500 x 2,200 x 1,700 mm Machine weight: 6.600 kg

Working length: 3,100 mm Cutting capacity: 6 mm Backgauge range: 1,000 mm Equipped with: - Sheet metal holding device at the back - 3 sheet metal support arms - Foot pedal Country of origin: France Motor power: 7.5 kW Machine LxWxH: 3,800 x 2,100 x 1,860 mm Machine weight: 6.000 kg

Bizerba metal detector with check weigher and rejecter, type metal detector: Genius+ GLS+ 350/150 (CWE), serial number: MD10976935, 110-230 V, 60/50 Hz, 0.34/0.17 A, 16 A, clearance: 350 mm x 150 mm, plastic belt, belt width: 320 mm, type checkweigher: CWE, number: 11016712, 120-220/240 V, 50/60 Hz, 5/3 A, maximum weight: 600/1500 gram, minimum weight: 20 gram, e=d= 0.2/0.5 gram, total dimensions: 2300 mm x 1000 mm x 1950 mm.

Description: LASER TECHNOLOGY SYNTERIZATION SYSTEM for METALLIC DUSTS .  , The machine is capable of producing parts made by melting fine metal powders in a few hours in a single processing step, using a laser beam, with any geometric complexity, with final solidity such that they can be used immediately, without using other tools. The process is based on three-dimensional geometry prepared in the form of CAD data that allows the machinery to directly build the parts with the metal powders.  , Composed of: 1 EOS EOSINT M280 sintering machine 1 radiator , 1 air circulation filter system , 1 exhaust gas filter system 1 washing bubbler 1 manual forklift 1 electric forklift 1 transport module 1 sieve module 1 loading mdule 1 fastening system  , Machine features: 2 400 W lasers printing area 250 x 250 x 350 mm scanning speed surface to be printed 7 m/ ...

Loma Systems metal detector on elevating belt, model: IQ³+E Metal Detector, serial number: QEU65-15-43736D, year of construction: 2018, 110-240 V, 1 Ph, 50/60 Hz, 0.5-1.0 A, s/s frame, plastic belt with dividers, belt width: 400 mm, divider height: 50 mm, distance between dividers: 200 mm, clearance: 670 mm x 150 mm, total dimensions: 4300 mm x 1120 mm x 4000 mm.

Metal detector with search coil EQA 65 x 15, No. 6.30.8941.30. Evaluation electronics EMS 21.1 and search coil display metallic foreign bodies in all non-conductive materials. Search width: 650 mm, pass height: 200 mm. Sensitivity is infinitely adjustable. With evaluation electronics in the control box.

Engine power: 1,1 kW, 230V / 1PH motor coolant pump: 50 W Feeding: manual Blade speed: 20-65 m / min Number of steps: infinitely variable Band saw blade dimensions: 1,735 x 12.7 x 0.9 mm length Vice open/closed: 1,120 / 930 mm width without / with material stop: 510 / 720 mm Height lower / upper final position saw bracket: 1240 / 1,590 mm Net weight: 100 kg G & pieces 3300150SE Option: 3 Piece bi-metal band saw blades HSS

Recycling plant with all necessary permits for the processing of wood, metal, plastic, compost, etc. is provided the supply of biomass to operate a remote heating system with 2-3 MW of power. There are corresponding contracts with energy buyers. Plot 7200 m2, fixed and is partially built over 2000 m2 Preparation year 2012-more information at Peter Ari Schär of MATEC Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland