8806 offers

maximum number of results exceeded > 1000
please refine your search

Category: 110: accessories for machine tools
New in: 2018
Price: 780 €
Location: Land-de DE Baden-Württemberg
Seller: Weyhersmüller GmbH & Co.KG

Tecma SCV-1276 GRIPP Zentrisch wrench, jaw width: 125 mm Jaw height: 33 mm maximum wingspan: 140 mm with low train function Lxwxh: 152 mm 125 mm 71 mm ground on all sides. with low train function 2 pieces available

Category: 208: lacquer machines
New in: 2008
Price: request quote
Location: Land-be BE
Seller: Vebim

Automatic spraying booth Panel feed by wide metal belts with 20 mm interspace, total width 1600 mm Feedspeed 4 to 10 m/min Rotary system with 8 arms, each arm with 2 guns (2 circuits) Automatic belt cleaning and lacquer recycling (Demo machine) items included: Infeed belt Cleaning brush with blowers Spray booth Outfeed roller conveyor pumps are included pistols are not included

Category: 104: grinding machines
New in: used
Price: 4.800 €
Location: Land-de DE Baden-Württemberg
Seller: Weyhersmüller GmbH & Co.KG

Min. 1.5 mm diameter range Max 165 mm diameter range Maximum drilling length 406 mm Spindle speeds: Number (step) 12 200 RPM to 2500 RPM Lifting speed: Number (level) 5 80 H / up 310 H/min Connection 50 Hz 3 x 380 Volt Spindle motor 0.73 kW Machine weight approx. 450 kg Dimensions machine: Lxwxh 1500 mm x 1300 mm x 1600 mm Accessories: Different sizes of honing Ahlen ect... Documentation

Category: 209: other wood working machines
New in: 1998
Price: request quote
Location: Land-be BE
Seller: Vebim

75 sleeves, each with diameter 20 cm, length 1,50 m. Capacity approx. 8000 m3/h Built-on fan, motor 11 kW, inlet 300 mm. Air Return + fire damper 6 x bag diam. 500 mm

Category: 104: grinding machines
New in: used
Price: request quote
Location: Land-bg BG 1303 SOFIA, 12 Iliyanci Blvd.
Seller: MUDAR-M LTD.

Category: 109: other metal working machines
New in: 1995
Price: 4.750 EU€
Location: Land-pl PL
Seller: Kennedy Machines

Category: 102: lathes
New in: used
Price: 5.700 €
Location: Land-de DE 73450 Neresheim, Heidenheimer Str. 5
Seller: Umrath Handel & Verwertung

The engine comes from a training workshop and is in very good condition! Manufacturer: Voest Alpine Type: DA - 160 Tip height 165 mm Top width: 650 mm Spindle bore: 36 mm Turning diameter over bed: 330 mm Swing over carriage: 190 mm Speed range: 30-2,500 rpm in 16 steps 3 - jaw Chuck Clamping pliers set Multi fix with 2 x holder Machine weight: 600 kg Dimensions: 1,600 x 900 x 1,250 mm Price plus 19% VAT from site near Stuttgart Mistakes and intermediate sale is reserved

Category: 101: boring mills and machining centers
New in: used
Price: used machinery auction RESALE 77 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 5 kg Dimensions (l x w x h) approx.: 350 x 250 x 100 mm Description: For metal, Ø1-10 mm, see photos

Category: 111: spare parts for machine tools
New in: used
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Power: 5.5 kW Model: AP 132 S - 4

Category: 1403: other storage equipment
New in: used
Price: used machinery auction RESALE 170 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 500 kg Dimensions (l x w x h) approx.: 2500 x 1000 x 1000 mm Description: Shelving with metal shelves

Category: 109: other metal working machines
New in: 1998
Price: request quote
Location: Land-de DE 56281 Emmelshausen, Dahlienweg 8
Seller: Mac-Tec

Procedures: [X x Y x Z] 600 x 400 x 450 mm Table size x 750 mm Table size Y: 500 mm maximum workpiece weight: 1000 kg Electrode changer: 24 - fold C-axis Builder: 64 amps Quill Arbor: EROWA ITS Rotationswechlser

Category: 101: boring mills and machining centers
New in: used
Price: used machinery auction RESALE 77 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 3 kg Dimensions (l x w x h) approx.: 200 x 200 x 200 mm Description: For metal, Ø1-10 mm, see photos

Category: 109: other metal working machines
New in: 2014
Price: request quote
Location: Land-de DE 56281 Emmelshausen, Dahlienweg 8
Seller: Mac-Tec

Procedures: [X x Y x Z] 600 x 420 x 370 mm Table size x 750 mm Table size Y: 550 mm maximum workpiece size x 950 mm maximum workpiece size Y: 740 mm maximum workpiece size z 450 mm maximum workpiece weight: 1500 kg maximum electrode weight: 50 kg Electrode changer: 6 - x C-axis Quill Arbor: EROWA Fire extinguishing

Category: 109: other metal working machines
New in: used
Price: used machinery auction RESALE 77 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 3 kg Dimensions (l x w x h) approx.: 200 x 200 x 200 mm Description: Composed of 3 packs with metal drilling bits 1-10 mm, see photos

Category: 102: lathes
New in: used
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

In good technical condition. Distance between tips 2000 mm Tip height 270 mm The spindle hole diameter 85 mm Turning diameter over bed 540 mm Turning diameter over slide 310 mm Bed width 350 mm Spindle - 3 courses Spindle end A1-8 Max speed 3100 RPM

Category: 109: other metal working machines
New in: used
Price: used machinery auction RESALE 67 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 3 kg Dimensions (l x w x h) approx.: 200 x 200 x 200 mm Description: Composed of 3 packs with metal drilling bits 1-10 mm, see photos

Category: 109: other metal working machines
New in: 1997
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

CNC laser machine Type: Bylas 6525 Manufacturer: Bystronic Switzerland Year of manufacture: 1997 MMC control with Bypos Work area: 6500 x 2500 mm Laser power: 3.5 kW Length [mm]: 19900 Width [mm]: 10500 Height [mm]: 2800 Weight [kg]: 18000 Power supply: 380 V Maximum sheet thickness [mm]: 25 Maximum workpiece weight [kg]: 2400 In the year 2018 is the complete resonator resonator and the harmonics of the travel. Including complete accessories. Fully functional condition, good overall technical condition.

Category: 109: other metal working machines
New in: used
Price: used machinery auction RESALE 77 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 5 kg Dimensions (l x w x h) approx.: 350 x 250 x 100 mm Description: For metal, Ø1-10 mm, see photos

Category: 109: other metal working machines
New in: 2001
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

CNC laser machine Type: Trumatic L 3030 Year of manufacture: 2001 Resonator: TLF 4000 Turbo - magnetically by 2007 Maximum power: 4 kW (current 4.1 kW) Maximum material thickness: -Structural steel 20 mm -Stainless steel up to 12 mm -Aluminium and its alloys up to 8 mm Work area: 3000 x 1500 mm Control: Sinumerik - SIEMENS Automatic pallet changer Axis travels: X 3000 mm Y: 1500 mm W: 115 mm Machine dimensions: 9300 x 4600 x 2200 mm Machine weight: 12000 kg Machine dimensions (L x W x H): 11250 x 4600 x 2400 mm In the year 2016 harmonics were replaced and the entire Servis was conducted. Working hours: turn 71 600 hours. burn over 34 000 hours Without material loaders ...

Category: 109: other metal working machines
New in: used
Price: used machinery auction RESALE 77 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 3 kg Dimensions (l x w x h) approx.: 200 x 200 x 200 mm Description: Composed of 3 packs with metal drilling bits 1-10 mm, see photos

Category: 101: boring mills and machining centers
New in: 2002
Price: request quote
Location: Land-de DE 86971 Peiting, Zechenstr. 10
Seller: CNC Bote Johann Demmel

Year of manufacture 2002 Control HEIDENHAIN 530i traverse paths X 2,000 mm Y 600 mm Z 600 mm HSK63 tool holder Work spindle 12,000 rpm Power 30 kW Other facilities: Factory witness cooling with Bank filter attachment internal Coolant Mist extraction system Machine complete enclosure in the working area Workpiece measurement of radio including button

Category: 1403: other storage equipment
New in: used
Price: used machinery auction RESALE 120 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato (BS)
Seller: Surplex GmbH

Weight approx.: 50 kg Dimensions (l x w x h) approx.: 500 x 500 x 1800 mm Description: Rack with Small Metal Parts

Category: 104: grinding machines
New in: 2002
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Type: BUA 25A / 750 NC Manufacturer: Cetos Year: 2002 Control system: Siemens Max grinding diameter: 250 mm Max grinding length: 750 mm Maximum workpiece weight: 250 kg Internal grinding equipment: Yes Distance between centers: 750 mm Dimensions L x W x H: 4000 x 2800 x 2200 mm Machine weight: 3000 kg The machine is equipped with a measurement - AMEST MC-1 Assurance, documentation and accessories of computer backup system (see photos).

Category: 101: boring mills and machining centers
New in: used
Price: used machinery auction RESALE 77 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 3 kg Dimensions (l x w x h) approx.: 200 x 200 x 200 mm Description: Composed of 3 packs with metal drilling bits 1-10 mm, see photos

Category: 102: lathes
New in: 1988
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Type: A40C Manufacturer: KOVOSVIT Year of construction: 1988 Weight: 2500 kg Condition: excellent Accessories: Chuck, feed pliers, knife holder, axle holder, Rod loader (3 m)

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 77 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 3 kg Dimensions (l x w x h) approx.: 200 x 200 x 200 mm Description: Composed of 3 packs with metal drilling bits 1-10 mm, see photos

Category: 103: milling machines
New in: 1977
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Year of construction 1977 Table clamping width: 500 mm Table clamping length: 2000 mm Longitudinal feed: 1250 mm Lateral shift: 500 mm Vertical spindle adjustment: 560 mm Spindle taper: ISO 50 Maximum workpiece weight: 1200 kg Machine dimensions: 6200 x 4600 mm Machine weight: 8100 kg

Category: 102: lathes
New in: new
Price: request quote
Location: Taiwan
Seller: GK Werkzeugmaschinen GmbH

faceplate diameter:2500 mm swing diameter:3000 mm turning height:1700 mm max. turning diameter:2800 mm weight of the machine ca.:53 t Chip Conveyor Coolant Tank Oil/Water Separator Machine Cover (High guarding) Heat exchanger For Electrical Cabinet Auto Lubrication for Guide way 4 Jaw Manual Chuck 1600mm Hydraulic Unit BT50 Tool Connection in RAM Metal frame and case in machine shipment packing(Wooden packing with metal base) 3 colors Warning Light Chamber light Anti- Dropping in Z axis -- Auto Motor Brake System Options Installed Air Conditioner For cabinet Coolant Through Spindle Filter for Coolant Water CE Mark Transformer

Category: 102: lathes
New in: used
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Control: CNC 836Mefi Maximum workpiece length 300 mm. Turning diameter 110 mm. Swing over 360 mm.

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

with conveyor belt\r\ndimensions: 180 x 95 x 150 cm \r\n

Category: 102: lathes
New in: used
Price: request quote
Location: Land-de DE 86971 Peiting, Zechenstr. 10
Seller: CNC Bote Johann Demmel

Control Siemens 840 d traverse paths X 400 mm Z 400 mm Main spindle: Spindle speed 8,000 rpm Spindle head 100 mm spindle bore 32 mm Counter spindle: Spindle speed 8,000 rpm Spindle head 100 mm spindle bore 32 mm Switching revolver: Number stations 16 x Powered 8 Tool holder VDI16 Dimensions and weight: 2,645 mm x 1,730 mm x 1.715 mm Weight approx. 2500 kg

Category: 205: boring mills, machining centers
New in: 1975
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

bore capacity in steel (diameter): 32,0 mm throat: 295 mm spindle taper MT: 4 MK engine output: 1,4 / 2,2 kW turning speeds: 55 - 1.450 U/min weight: 440 kg range L-W-H: 600 x 400 x 1900 mm

Category: 103: milling machines
New in: used
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

In good technical condition. Max grinding diameter: 320 mm. Max grinding length: 1000 mm. Maximum workpiece weight: 300 kg Machine weight: 5200 kg. Accessories: Lunets, supports and disks.

Category: 101: boring mills and machining centers
New in: 2002
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

spindle diameter: 4 MK x-travel: 1700 mm y-travel: 550 mm z-travel: 430 mm spindle stroke: 160 mm Pinole turning speeds: 80 - 4.000 U/min surface area: 1.700 x 550 mm table load: 500 kg. threading: 24 M Boring power: 34,0 mm operating pressure: 8,0 bar total power requirement: 4,0 kW

Category: 103: milling machines
New in: 1987
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

In good technical condition Production in 1987. The machine is designed for large parts. Table length 62 mm, table width 2240 mm.

Category: 109: other metal working machines
New in: 2002
Price: used machinery auction RESALE 670 €
Location: Land-de DE Germany, 71679 Asperg
Seller: Surplex GmbH

Weight approx.: 1600 kg Dimensions (l x w x h) approx.: 3600 x 1200 x 1800 mm total power requirement: 16 kW Description: BÄR KF 50 - TF 362 L - ET 80 V - KSF Coolant Unit - consisting of several pumps, deep-bed filter, coolant aggregate, metal-edge filter etc. - operating voltage: 400 V, 50 Hz - total volume: 2100 l - unit is suitable for several machining centres

Category: 112: gear cutting and hobbing machines
New in: used
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Max scratch height: 365 mm Diameter of the round table: 570 mm Weight: 6500 kg

Category: 902: agricultural trailers
New in: 2012
Price: 8.500 EU€
Location: Land-pl PL
Seller: Kennedy Machines

Category: 103: milling machines
New in: 1984
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Year of manufacture 1984 Control HEIDENHAIN table length: 2200 mm Table table width: 630 mm Table clamping force: 630 x 2200 mm Longitudinal displacement (X): 1500 mm Vertical feed (Z): 630 mm Lateral displacement (Y): 630 mm Spindle clamping spindle: ISO 50 Main power: 25 kW Dimensions L x W x H: 3320 x 3230 x 3220 mm Machine weight: 11500 kg

Category: 105: saws
New in: 2009
Price: request quote
Location: Hamburg-Barsbüttel
Seller: SALING Werkzeugmaschinen GmbH

cutting diameter:290 mm saw band length:3120 mm cutting width:27 mm cutting speed:30/70 m/min table height:940 mm speeds:2 cutting range square:0° 320 x 290 mm cutting range square:45° 240 x 150 mm cutting range square:60° 150 x 180 mm cutting capacity round:0° 290 mm cutting capacity round:45° 240 0 cutting capacity round:60° 150 mm total power requirement:2 kW dimensions of the machine ca.:1800 x 950 x 2100 mm weight of the machine ca.:570 kg

Category: 106: presses
New in: 2002
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

In good technical condition. Year of manufacture: 2002 Number of axles 3. Operating hours 26 338 h. Bending length 3100 mm Max press. Print 1200 KN Max hub 180 mm Machine weight: 8,700 kg. Machine dimensions 4200 x 1650 x 2775 mm Manual clamping tools There are two small tables (for fixing the blades to the press) The machine has a complete technical documentation.

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 70 €
Location: Land-ch CH Switzerland, 6830 Chiasso
Seller: Surplex GmbH

Weight approx.: 120 kg Dimensions (l x w x h) approx.: 1200 x 800 x 1600 mm Description: Made of metal, each approx. 300 x 500 x 200 mm

Category: 112: gear cutting and hobbing machines
New in: 1963
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Still in operation, good condition. Max milling module 10 Max India. Wheels 1000 mm without stand Max India. Wheels 750 mm with stand Width of the machined wheel 400 mm Minimum. Number of milled teeth 12 Power of main drive 10 kW Total weight 9360 kg

Category: 201: saws
New in: 1990
Price: used machinery auction RESALE 320 €
Location: Land-es ES Spain, 28890 Loeches - Madrid
Seller: Surplex GmbH

Weight approx.: 220 kg Dimensions (l x w x h) approx.: 970 x 1320 x 1450 mm Description: ? Radial arm saw ? Serial number 35708 ? Motor 3 kw-3000 rpm ? Swiveling head, tilting head ? Longitudinal cutting capacity approx. 930 mm ? Transversal cutting capacity approx. 700 mm ? Blade saw diameter 300 mm, bore diameter 30 mm ? Cutting max. height approx. 90 mm ? Mounted on metal support with wooden work table with dimensions 950 x 1000 mm

Category: 103: milling machines
New in: 1984
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Table dimensions: 230x1000mm, table travel horizontal/ cross/ vertical: 600/ 230/ 385mm, table feed: 22-384mm/min, rapid traverse: 2020mm/min, spindle cone: ISA 40, rotational speed: 40-980/min, length: 1450mm, width: 1300mm, height: 1950mm, weight: 1.2t.

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 30 €
Location: Land-de DE Germany, 52388 Nörvenich
Seller: Surplex GmbH

Weight approx.: 150 kg Dimensions (l x w x h) approx.: 1200 x 800 x 400 mm Description: Approx. 6 pcs., metallic paint, Dynamik XP full pull-out 40 kg Softclose NL 550, door stop damper Softclose Clip-on WÜRTH, 110° corner stop furniture hinge, various screws and brackets

Category: 104: grinding machines
New in: 1984
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Max. grinding area: 700x420mm, with 3-axes automatic and automatic stop.

Category: 205: boring mills, machining centers
New in: 2000
Price: used machinery auction RESALE 420 €
Location: Land-es ES Spain, 28890 Loeches - Madrid
Seller: Surplex GmbH

Weight approx.: 250 kg Dimensions (l x w x h) approx.: 700 x 850 x 1850 mm Description: ? Bench drill, column drilling machine ? Serial number 1058/884 ? Chuck capacity 30 mm ? Motor 1.20 kw ? 10 speeds from 245 rpm up to 4000 rpm ? Table dimensions 460 x 550 mm ? Drilling depth approx. 120 mm ? Column diameter 100 mm ? Mounted on metal table

Category: 102: lathes
New in: 2014
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Very good condition, including accessories. Operating system SINUMERIK 840 d sl Maximum processed diameter 500 mm Turning diameter over bed 800 mm Torque (between peaks) 800 mm Axis X 360 mm Z axis 900 mm Accelerated X / Z axis movement 15/24 m / min. Maximum work-piece weight of 800 kg Spindle head A11 Spindle power (100 / 40%) 22/33 kW Torque - transmission 1 175/263 NM Torque - transmission 2 700/1050 nm Tail stock sleeve diameter 110 mm Conical clamping MK4 Pin hole hub 100 mm Thrust (at 30 kg / cm2) 850 daN Number of stations 12 (servo-revolver) axial, radial VDI 50 tool clamping Speed 4000 RPM. Performance 5 / 9.4 kW Total weight 8.5 t Dimensions (conveyors) 4203  ...

Category: 201: saws
New in: used
Price: request quote
Location: Land-pl PL Poland, 32-800 Brzesko
Seller: Surplex GmbH

Weight approx.: 150 kg Dimensions (l x w x h) approx.: 800 x 800 x 1000 mm Description: Metal table saw

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)