129,264 used machines on RESALE, but how to find them? Machine Search
Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø16 x 210 mm -Dimensions: 265/100/H95 mm -Weight: 3.1 kg
Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø17 x 210 mm -Dimensions: 265/100/H90 mm -Weight: 2.9 kg
Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø22/25 x 215 mm -Dimensions: 315/65/H85 mm -Weight: 1.9 kg
Punching tool, punch, scraper, hold-down device -Handover: in current condition as seen -Bracket: Damage see photos -Scraper: hold-down device for punching -Receptacle: Ø26/22 x 210 mm -Dimensions: 315/125/H95 mm -Weight: 4.2 kg
Large amount of scrap iron including conveyor belts and cables
used side feeder for foil snippets / scrap Centrifuge with drive and feed container this unit was mounted on a 150 mm extruder Capacity over 320 kg/h
max. grinding diameter: 400 mm grinding width: 0 mm max. module: min. module: total power requirement: 3 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunat ...
Scraper capacity 20m: 108m³/h, outreach: 20m, boom angle of attack: 15°, slewing radius: 2080mm, clearing bucket width: 1170mm, volume: 1050l, steep angle: 320°, max. tractive force: 62kN, max. load torque: 322kNm, connected load: 47kW. Machine dimensions X/Y/Z: approx. 3200mm/2150mm/2350mm, weight: approx. 4600kg. On-site inspection is possible.
used barrier scrap shears Manufacturer: Schlüter Type: BS 1 Year of Make: 1973 specifications: Performance with a material strength of 40 kp/mm²: Round bar: up to 40 mm Square bar: up to 35 mm Sheets: up to 15 mm Pipes up to 6 mm wall thickness: 300 mm Railway sleepers: all normal grades Angle iron: 100 x 100 x 10 mm Knife Dimensions: Knife length: 600 mm Knife opening front: 310 mm Knife opening rear: 140 mm Cutting rate: 30/min. Drive power: 7.5 hp / 5.5 kW Dimensions: Length: approx. 4,000 mm Width: approx. 1,400 mm Height: approx. 2,000 mm Weight: approx. 3,600 kg Description of the machine: Due to the extremely large blade opening, it is particularly suitable for light, bulky scrap. It is designed in a mobile version with drawbar and has a shear coupling as extensive protection against overloading. High ...
Stock number: A217, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Scraped surface heat exchanger , Standing: 4 pcs. legs, Motor: 2,2 kW, Total height: 2600 mm., Connections: 4 pcs Ø 2, Manufacturer: APV
Stock number: A216, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Scraped surface heat exchanger , Standing: 4 pcs. legs, Motor: 2,2 kW - 380 Volt, Total height: 2150 mm., Connections: 4 pcs Ø 2, Manufacturer: APV, Model/type: VT 460, Year: 2000
Stock number: A144, Scrabed surface heat exchanger, stainless steel,, Brogli model Agitemp., 9,2 kW gear motor., 212 rpm., Ø 1 connections., Material: Stainless steel AISI 304
Stock number: A051, Scraped heat-exchanger, stainless steel,, Gerstenberg & Agger,, type Labo Perfektor 1x57 B/L,, 4 zones., Material: Stainless steel AISI 304
Stock number: A052, Set of scraped surface heat exchangers, stainless steel,, APV type SSHE 2HD 672 1991., Double tube 2 x Ø 160 x L 1500 mm., Horizontal lying in stainless steel cabinet., 5,5 kW gear motors, 148 rpm, 220/380 V., Material: Stainless steel AISI 304
Stock number: A050, Scraped heat-exchanger, stainless steel,, Votator type 1C 624 L,, 2 zones., 3 HK motor, adjustable speed, 160 - 640 r/min., Material: Stainless steel AISI 304
Brand: Jwell Cutting width: 1440 mm Capacity: up to 6mm thick Geared motor: 7.5 hp (5.5 kW) Type: Mechanical Guillotine
Chip conveyor, scraper conveyor with coolant tank BMF type KF 200 K17Ident. No: 0495078 Order No: 915979 year of construction 1992Metal link width 200 mmDistance driver bars approx. 380 mmLength of possible chip removal 1100/2100 mmInsertion length approx. 1350 mmInsertion height 370 mmInsertion width 460 mmHopper width at the top 400 mmHopper width at the bottom 170 mmConveying height - discharge height approx. 1250 mmMotor power belt drive 0.37 kWNetz connection 400 volts, 50 Hz- Drive of the scraper chain via geared motor-
Chip Conveyor, Chip Conveyor Belt, Coolant Cleaning, Chip Disposal, Scraper Conveyor, Scraper Conveyor, Chip Chain Conveyor, Hinge Belt Conveyor, Scraper Belt Conveyor – Subject to change – Manufacturer: RUEZ GmbH Type: Chip Conveyor, Scraper Conveyor Year of Make: 2002 TYPE: KF0WW2/306 DAS Conveyor belt width: 310 mm -Outlet height: 1300 mm -Total dimensions: L:4.370/W310/H1.820 mm -Total weight: approx. 800 kg Drive: Manufacturer: Getriebefabrik Cowig GmbH TYPE: SSMAH63 11-362.7 B3 TYPE: Worm Gear Specifications: Gear ratio(s2): 3.82 min-1. Torque (T): 337 Nm. Weight (m): 28 kg
General SKU354T1373 LocationBarneveld MakeSchroder Kombinator TypeVEMK 01/108-350 No.11/4053-1-182757 Year of construction2002 Main Features MaterialStainless steel Volume1.8 Ltr. Motor3 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4571 (316Ti) Scraped surface heatexchangers Mixercheck Capacity1,8Ltr. Information Total height1,7m Weight380kg CEcheck Floorspace1,7x0,65m Extra Specificationsthe interior is peg mill-based. this machine has been used for margerine / fat operating pressure: 25bar maximum temperature: 90°C capacity: 50-150kg/h used for post-treatment of grease. emulsifier / homogeniser Scraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to ...
General SKU354T1003 LocationBarneveld MakeChemtech International Ltd Type212W and WH 35F No. CC9816-01 and CC 9816-07 Year of construction1998 Pressure Working pressure40 Bar Working pressure jacket13.8 Bar Main Features MaterialStainless steel Motor7.5 KW Surface1 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Scraped surface heat exchangercheck Number of stages:2 Heating surface1,03m² Heating surface shell±0,28 Heating surface rotor±0,25m² Capacity 200kg/h Cylinder sizesDia: 152x600mm Max. temperature0-195°C With jacketcheck Rotor can be cooled/heatedcheck Max. temperature0-195°C InletDia: 50mm, 38mm OutletDia: 50mm, 38mm Motor1.1kW, 400/690volt, 1465rpm With post treatment cylindercheck Heating surface±0,5m² Cylinder sizesDia: 280x570mm Motor7,5kW, 400/690Volt, 1430rpm ...
ID3713 SCS 10.920 hours/hours Mobile Scrap Shear Mobile scrap shears
working width approx. 1000 mm; working length approx. 1450 mm; incl. steel funnel; Dim. approx. 1300x1900x1400 mm Auction-ID: A1-43573-82
Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -HOMAG finishing unit allows you to smooth the milled edges for optimal appearance of the edge overhang -with scanning of 2 sides each -scraping blade from above and below -Quantity: 1 piece available -Dimensions: 500/450/H650 mm -Weight: 60 kg
Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: OTT, profile scraper from edge banding machine type U206 -Quantity: 1 piece available -Dimensions: 460/430/H560 mm -Weight: 57 kg
ENERPACK cylinders NOT INCLUDED - placed in a separate batch. Lot destined for scrapping. The quantities have not been accurately detected, delivery of all items visible in the photos is not guaranteed, on-site inspection is recommended. Dismantling and loading to be carried out with own vehicles ex-works. It will be necessary to provide the documentation necessary for the execution of the works in full in compliance with the safety regulations in force. Auction-ID: A7-45181-52
Guillotine Shears, Metal Shears DIGEP Type OL 3Workshop Overhauled Guillotine ShearFabr. No. 1312 Year of construction 1977Cutting length 1250 mm (nominal cutting length)Cutting length max. 1300 mmCutting thickness at 450 N/mm² 3 mmSingle back gauge 500 mmStand projection 200 mmCutting angle 2 stroke rate at full cutting length max. 50 strokes/min. Working height 860 mmMotor power 2.2 kWNew connection 380 Volt, 50 Hz- LED cutting area-Lighting- Simple backgauge with manual adjustment- Mechanical
Guillotine shear LOTZE type HSS 20 / 7Cutting length 2050 mmCutting thickness 7 mmwith single back gauge; used
LOT 3 Type: Industrial metal hall Year of construction: 2026 Material: Steel construction Total area: 420 sq m Overall dimension (1): L 12000 mm Overall dimension (2): L 30000 mm Height: 5000 mm Ridge height: 7000 mm Additional information: Roof slope: 20 degrees; Painted RAI 5023; The structure consists of 2 beams (trusses) at the ends made of IPE 160 profile; 5 intermediate beams (trusses) from IPE 200 profile; 4 end columns from IPE 160 profile; 10 intermediate columns from IPE 200 profile; 4 door columns from square pipe 100x100x4; 6 pressure uprights from pipe 76x4; wind bracing for beams and columns made of galvanized steel with 16 mm tensioner; The whole structure is assembled with bolts (removable); Condition: unused; The structure includes a certificate of conformity for materials, construction draft, and foundation plan; An 8-ton forklift is available ...
Type: Metal shed Year of construction: 2026 Material: Steel Overall dimensions: Length (1): 12000 mm Length (2): 20000 mm Total area: 240 m² Gutter height: 4000 mm Ridge height: 5800 mm Additional information: Roof slope: 20° Color: Painted RAL 5023 Structure: - 2 beams (trusses) on the ends – IPE 160 profile - 3 intermediate beams (trusses) – IPE 200 profile - 4 end posts – IPE 160 profile - 6 intermediate posts – IPE 200 profile - 3 door posts – square pipe 100x100x4 - 4 pressure uprights – pipe 76x4 - Wind bracing for beams and posts – galvanized steel strips with 16 mm tensioners Assembly: Bolted construction (demountable) Documentation: - Certificate of Conformity for materials - Construction sketch - Foundation plan Condition: Unused Loading: Free loading Auction-ID: A7-45215-5
LOT 1 Type: Industrial metal warehouse Material: Steel Year of construction: 2026 Overall size (1): L 15000 mm / 15000 mm Overall size (2): L 30000 mm Height of the post: 4500 mm Ridge height: 6500 mm Total area: 450 sq m Additional information: Roof slope: 20 degrees; Painted RAI 5023; The structure consists of: 2 beams (trusses) on the ends which are from the IPE 160 profile; 5 intermediate beams (trusses) from the IPE 220 profile, 4 end posts from the IPE 160 profile, 10 intermediate posts from the IPE 220 profile, 4 door posts from the square tube 100x100x4; 6 pressure struts from 76X4 pipe; wind strip for beams and posts made of galvanized steel with 16 mm tensioner; The entire structure is on bolts (removable); Condition: unused; The entire structure includes Certificate of Conformity for materials, construction sketch, foundation plan. Auction-ID: A7-4 ...
LOT 4 Type: Industrial metal hall Material: Steel Year of construction: 2026 Total area: 300 sq m Overall size (1): L 12000 mm Overall size (2): L 25000 mm Gutter height: 4500 mm Ridge height: 6000 mm Additional information: Roof slope: 20 degrees; Painted RAI 5023; The structure consists of: 2 beams (trusses) on the ends from IPE 160 profile; 4 intermediate beams (trusses) from IPE 200 profile; 4 end posts from IPE 160 profile; 8 intermediate posts from IPE 200 profile; 3 door posts from square pipe 100x100x4; 5 pressure uprights from 76x4 pipe; wind bracing for beams and posts made of galvanized steel with 16 mm tensioner; The entire structure is assembled with bolts (demountable); Condition: unused; The structure includes Certificate of Conformity for materials, construction sketch, and foundation plan; Auction-ID: A7-45215-4
LOT 6 Type: Metal hall Material: Steel Year of construction: 2026 Total area: 250 sq m Overall size (1): L 10000 mm Overall size (2): L 25000 mm Gutter height: 4000 mm Ridge height: 5500 mm Additional information: Roof slope: 20 degrees; Painted RAI 5023; The structure consists of: 2 beams (trusses) on the ends from IPE 140 profile; 4 intermediate beams (trusses) from IPE 180 profile; 4 end posts from IPE 140 profile; 8 intermediate posts from IPE 180 profile; 3 door posts from square pipe 100x100x4; 5 pressure uprights from 70x4 pipe; wind bracing for beams and posts made of galvanized steel with 16 mm tensioner; The entire structure is assembled with bolts (demountable); Condition: unused; The structure includes Certificate of Conformity for materials, construction sketch, and foundation plan; Auction-ID: A7-45215-6
Good condition Auction-ID: A7-45427-145
Metal detector with search coil EQA 65 x 15, No. 6.30.8941.30. Evaluation electronics EMS 21.1 and search coil display metallic foreign bodies in all non-conductive materials. Search width: 650 mm, pass height: 200 mm. Sensitivity is infinitely adjustable. With evaluation electronics in the control box.
Metal press RMH MB (Mini Baler) This machine is particularly suitable for pressing aluminium, copper, zinc and other metals. The RMH MB Mini Baler is able to crush and then press larger material made of aluminium, copper, zinc and other metals thanks to lateral knives on three sides of the filling box. Technical data: Drive: 7.5 Kw / 400 V Weight: 1.8 T Shear lid pressure: 20 t Ground ram pressure: 40 t Working pressure: 220 BAR Filling box dimensions (L x W x D): 81.5 cm x 35 cm x 51 cm Package dimensions (L x W x material quantity): 35 cm x 20 cm x variable length (material quantity) Pressing cycle: about 1 minute Dimensions (L x W x H): 2.45 meters x 1.20 meters x 1.40 meters CE Norm Metal Baler RMH MB (mini baler) Cutting edges on three sides of the bale box and lid give this machine the ability to handle with oversized materials out of aluminium, copper, ...
Max Saegeblattdurchmesser, 315 mms of drilling 32 mms sheet speeds 53-105 revos quick instep vice 180 mms of opening engine power 2.2 kW role edition coolant equipment +-45 ° tiltable weight 220 kg special price: net 1584,-? . options: underframe net 197,-? circular-saw blade
Item condition: New. Machine is delivered pre-assembled and tested. Specifications / Technical Data S-720 CNC-Fraesmaschine Engravings of all kinds, even on glass, VHM, carbide and up to 62 RC hard steel ! With the High-Z CNC-Fraes.- and Engraving Machine they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are pr ...
Technical data: engine: 7.5 kW / 400 V weight: 1.8 t mole lid pressure: 20 t ground rams pressure: 40 t working pressure: 220 BARS filling box dimension (L x B x T): 81.5 cm x 35 cm x 51 cm parcel dimension (L x B x material amount): 35 cm x 20 cm x variable length (material amount) Presszyklus: approx. 1 minute dimensions (L x B x H): 2.45 metres x 1.20 metres x 1.40 metres CE norm
The SERVOCUT 302 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machine ...
Engine power: 1,1 kW, 230V / 1PH motor coolant pump: 50 W Feeding: manual Blade speed: 20-65 m / min Number of steps: infinitely variable Band saw blade dimensions: 1,735 x 12.7 x 0.9 mm length Vice open/closed: 1,120 / 930 mm width without / with material stop: 510 / 720 mm Height lower / upper final position saw bracket: 1240 / 1,590 mm Net weight: 100 kg G & pieces 3300150SE Option: 3 Piece bi-metal band saw blades HSS
We offer metal trays, which are used as subjects in heavy duty and pallet racks. technical data: Width: 890mm Depth: 1120mm Number of sticks: 3 units Capacity: At box 500kg, when setting up a pallet of 1000 kg Weight: 6, 8kg / PCs. Net price â?¬13.00 per piece Product available now We have also other Rack Accessories, as well as other racks on sale. Do you need something? Like to take contact with us. On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must be considered. Offer is valid until stocks last. Before you click buy, you record please contact with us, to confirm the availability of the product.
Recycling plant with all necessary permits for the processing of wood, metal, plastic, compost, etc. is provided the supply of biomass to operate a remote heating system with 2-3 MW of power. There are corresponding contracts with energy buyers. Plot 7200 m2, fixed and is partially built over 2000 m2 Preparation year 2012-more information at Peter Ari Schär of MATEC Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland
Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request
maximum number of results exceeded
please refine your search
10 € 
