metal scrap used for sale

General SKUR0081 MakeV.K.I. Schiedam bv (NL) LocationBarneveld CEcheck Type3V SSHE Micro Votator / Schröder Kombinator Main Features MaterialStainless steel Motor7.5 KW Surface0.22 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchanger:Micro Votator: Number of stages:1 steam heated, 1 freon r-404a cooled, 1 water cooled/heated Heating surface0,246 (scraped surface) Heating surface shell0,229 m2 Capacity50 - 150 Kg/h Cylinder sizes(3x) dia.157mm x 500mm Max. temperature140 degr.C With jacketcheck Inletdia.30mm Outletdia.30mm Motor7,5 KW, 380/660 Volt Speed50- 500 rpm MaterialStainless steel With jacketcheck General No.V0910-94353-10A19191 Year of construction1995 Mounted on framecheck With switchcheck With switchgear(as is) Floorspace1,9x1,4 M Total height2,5 M Weight1500 KG Extra SpecificationsWith Bitzer Kühlmaschinenba ...

General SKUR0078 MakeTMCI Chemtech LocationBarneveld TypeCR 0327 Main Features MaterialStainless steel Motor5.5 KW Surface0.1 m2 Specified Features - Scraped surface heat exchanger Heating surface0,1 M2 Cylinder sizesdia 110 x 320mm Inletdia. 20mm Outletdia. 20mm Motor5,5 kW 380-415 Volt MaterialStainless steel General No.WO 0327/01 Year of constructionunknown Floorspace1,0x0,6 M Total height1,4 M Weight260 KgScraped surface heat exchangersOils & fatOintmentsStarchCosmeticsFood additivesSugarConfectioneryBeveragesBiopharmaceuticalAPI-Heat exchangers > Scraped surface heat exchangersIndustries > Food & Feed > Oils & fatIndustries > Pharmaceutical > OintmentsIndustries > Food & Feed > StarchIndustries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndustries > Food & Feed > Beverag ...

General SKUR0087 MakeSchröder &: Co Maschinenfabrik (D) LocationBarneveld TypeVWK 01/60-400 Main Features MaterialStainless steel Motor2.2 KW Surface0.07 m2 Specified Features - Scraped surface heat exchanger Number of stages:1 Heating surface0.07 M2 Cylinder sizesdia.60x380mm With jacketcheck Inletdia. 25mm Outletdia. 25mm Motor2,2 kW 230 Volt With variable speed drivefrequency controller MaterialStainless steel With jacketcheck General No.110705 Year of construction1989 Mounted on wheelscheck With switchgearcheck Floorspace1,4x0,4 M Total height1,4 M Weight230 KgScraped surface heat exchangersOils & fatOintmentsStarchCosmeticsFood additivesSugarConfectioneryBeveragesBiopharmaceuticalAPISchröderHeat exchangers > Scraped surface heat exchangersIndustries > Food & Feed > Oils & fatIndustries > Pharmaceutical > OintmentsIndustries > Food & Feed > StarchIndustr ...

General SKU311P700 MakeSchröder&:Co Maschinenfabrik (DE) LocationBarneveld Main Features MaterialStainless steel Motor2.2 KW Specified Features - Scraped surface heat exchanger Scraped surface heat exchanger:Cooler: Number of stages:1 Cylinder sizes+/- dia.80mm x350mm Max. temperature-20 degr.C. Inletdia.25mm (product), dia.25mm (Glycol) Outlet:missing:: Motor2,2 KW, 220/380 Volt With variable speed drivecheck With variable speed drivecheck MaterialStainless steel General No.23-232 Year of construction1984 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,4x0,7 M Total height1,3 M Weight150 KG Technical specs Extra informationcylinder size: dia. 80 mm x 350 mmScraped surface heat exchangersOils & fatOintmentsStarchCosmeticsFood additivesSugarConfectioneryBeveragesBiopharmaceuticalAPISchröderHeat exchangers > Scraped surface heat  ...

General SKU227Y123 LocationBarneveld MakeTerlet Type190 l. No.89-063 1 Pressure Working pressure3.5 Bar Vacuum possiblecheck Main Features MaterialStainless steel Motor7.5 KW Specified Features - Scraped surface heat exchanger Scraped surface heat exchangercheck Capacity190 l. Cylinder sizesø 570 x 1230 mm Max. temperature100 °C With jacket34 l. &: 2,6 l. InletDN50 OutletDN50 Motor7,5 kW, 380—415 V Speed± 66 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) With jacketcheck General Year of construction1989 Mounted on framelegs Floorspace1,20 x 0,90 m Total height2,40 m Weight1000 kg Extra Specifications6-arms scraperScraped surface heat exchangersOils & fatOintmentsStarchCosmeticsFood additivesSugarConfectioneryBeveragesBiopharmaceuticalAPITerletHeat exchangers > Scraped surface heat exchangersIndustries > Food & Feed > Oils & fat ...

General SKU020A140 MakeAlfa Laval TypeContherm 6x4 No.HC-288 Year of constructionunknown Mounted on framecheck Main Features MaterialStainless steel Motor4 KW Surface0.4 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchanger(1x) Heating surface0,37 M2 (4 Square Feet) Cylinder sizesdia. 152mm (6 Inch) With jacketcheck Motor4,0 KW, 380 Volt With variable speed drivecheck MaterialStainless steel With jacketcheck General LocationBarneveld Floorspace1,2x0,9 M Total height1,8 M Technical specs Extra informationcylinder size: 152 mmScraped surface heat exchangersOils & fatOintmentsStarchDiscountCosmeticsFood additivesSugarConfectioneryBeveragesBiopharmaceuticalAPIAlfa LavalHeat exchangers > Scraped surface heat exchangersIndustries > Food & Feed > Oils & fatIndustries > Pharmaceutical > OintmentsIndustries > Food & Feed > StarchDiscountIn ...

General SKU034G143 MakeAlfa Laval TypeContherm 6x3 No.HC-4844 NCC + HC-1802 NCC Year of construction1992 / 1982 Mounted on framecheck Material Product contact materialStainless steel 1.4301 (304) Pressure Working pressure20 Bar Working pressure jacket17.2 Bar Main Features MaterialStainless steel Motor15 KW Surface0.6 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchanger(1x) Heating surface0,279 m2 each With jacketcheck Rotor can be cooled/heatedcheck Motor2x 7,5 kW (400 V, 1450 rpm) Speed177 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General LocationBarneveld With switchcheck Floorspace1,3 x 1,0 m Total height2,0 m Weight650 kg Technical specs Extra informationworking pressure 20 bar (300 PSI) / 31 bar (450 PSI): jacket working pressure 15,5 to 17,2 barScraped surface heat exchangersOils & fatOintmentsStarch ...

General SKU291Y495 LocationBarneveld MakeSchröder Main Features MaterialStainless steel Motor2.2 KW Surface0.157 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchangercheck Number of stages:1 Heating surface0,157 m² Cylinder sizesø 110 x 455 mm Inletø 25 mm Outletø 25 mm Motor2,2 kW (415 V, 940 rpm) Speed138—1085 rpm MaterialStainless steel 1.4571 (316Ti) General TypeVC 01/106-400 No.11/3686-01-160076 Year of construction1998 Floorspace0,5 x 1,8 m Total height0,85 m Weight300 kg Extra SpecificationsPin-RotorScraped surface heat exchangersOils & fatOintmentsStarchCosmeticsFood additivesSugarConfectioneryBeveragesBiopharmaceuticalAPINew arrivalsSchröderHeat exchangers > Scraped surface heat exchangersIndustries > Food & Feed > Oils & fatIndustries > Pharmaceutical > OintmentsIndustries > Food & Feed > StarchIndustries > Chemi ...

General SKU291Y496 LocationBarneveld CEcheck MakeSchröder Main Features MaterialStainless steel Motor3 KW Surface0.05 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchangercheck Number of stages:1 Heating surface0.05 m² Cylinder sizesø 50 x 300 mm Inlet25 mm Outlet25 mm Motor3 kW (380 V, 940 rpm) With variable speed drivecheck Speed225—1770 rpm MaterialStainless steel 1.4571 (316Ti) General TypeVK 01/60-400-F No.11/3686-01-160044 Year of construction1998 Floorspace0,6x1,8 m Total height0,85 m Weight300 kg Extra SpecificationsWiper-bladesScraped surface heat exchangersOils & fatOintmentsStarchCosmeticsFood additivesSugarConfectioneryBeveragesBiopharmaceuticalAPISchröderHeat exchangers > Scraped surface heat exchangersIndustries > Food & Feed > Oils & fatIndustries > Pharmaceutical > OintmentsIndustries > Food & Feed > Starch ...

General SKU291Y471 MakeFryma TypeSK 60 No.M11339 Year of construction1985 Pressure Working pressure8 Bar Working pressure jacket8 Bar Main Features MaterialStainless steel Motor23.8 KW Surface6.98 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchangercheck Number of stages:3 Heating surface6,98 m² (1: 2,85 m², 2: 2,3 m²: 3: 1,83 m²) Capacity146,51 l. (1: 61,93 l.: 2: 47,17 l.: 3: 37,41 l.) Cylinder sizesø 665 x 740: ø 600 x 690 mm, ø 490 x 690 mm, ø 380 x 690 mm With jacketcheck InletDN80 OutletDN100 Motor23,8 kW, 400 V Speed46 rpm MaterialStainless steel 1.4571 (316Ti) With jacketcheck General Mounted on framecheck LocationBarneveld Floorspace2,90 x 0,90 m Total height2,00 m Weight1500 kgScraped surface heat exchangersOils & fatOintmentsStarchCosmeticsFood additivesSugarConfectioneryBeveragesBiopharmaceuticalAPINew a ...

MAJA PART NUMBER : 515-0422 TRANSPORT SCRAPER ROLLER Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

Manufacturer: Bonfiglioli Type of Machine : Scrap shear This machine has sustained fire damage. The main structure and the cutting unit remain intact, including the knife, cutting cylinder, and quick-opening function. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Conveyor belt for scraps from guillotine M-Fordersysteme - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Conveyor belt for scraps from guillotine M-Fordersysteme Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Conveyor belt for scraps from guillotine M-Fordersysteme Price: 3500 EUR Download PDF Conveyor belt for scraps from guillotine M-Fordersysteme Production Germany Year of manufacture 2015. Working width 46 cm, conveyor length approx. 250 cm. Discharge of trimmings from under the machine directly to the container. Material pressing roller, upper cover preventing spillage of the excava ...

This 3-axis DESKTOP METAL Metal Studio 2 was manufactured in 2021. It utilizes Bound Metal Deposition technology and features a build volume of 300 x 200 x 200 mm. The machine supports various materials, including 316L and H13 Tool Steel, and operates with a dual extruder system. If you are looking to get high-quality metal 3D printing capabilities, consider the DESKTOP METAL Metal Studio 2 machine we have for sale. Contact us for further details.

Fabric grinding belts of M3 1260 mm x 13 mm P150 for metalworking

Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after a NO-ne ate separator (eddy current separator) or as a stand-alone machine. Separation of all metals from approx. 1 mm grain size. Meaningful use for metal contents up to 60% metal content. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, can be inspected and tested. On request also with camera! If the machine is too small, we build it larger. This is our demo machine. Maximum throughput depends on the material and purpose. Price matter of negotiation!

; neu, sofort lieferbar

Safeline Pipeline metal detector 31652 Stainless frame pipeline metal detector, 150mm diameter aperture, with pneumatic reject,

· NON FERROUS SEPARATOR EDDY CURRENT · For the separation of aluminium and copper · Width 1000 mm · 14 poles concentric drum · Durable PVC belt conveyor · With electric cabinet, with 2 pieces of frequency inverters for speed adjustment of conveyor and separation drum · RAL color according to the customer´s choice · New machine manufactured in the EU

Automated sheet metal storage system manufactured in 2022. This TRUMPF Automated Sheet Metal Production System features a storage height of 7,900 mm and a maximum load per storage location of 3,000 kg. It includes 266 storage locations and supports sheet formats of 3,050 x 1,525 mm. If you are looking to get high-quality automated storage capabilities, consider the TRUMPF Automated Sheet Metal Production System we have for sale. Contact us for further details.

Offer 24455 Specifications: - Saw feed via hand lever - Saw blade diameter 315 mm - Largest opening width vice approx. 160 mm - Cutting range approx. at 90° around 100 mm - Flat up to 135 x 80 mm - Cutting range Li + RE at 45° around 108 mm - Flat up to 100 x 80 mm - Cutting range Li at 60° around 80 mm - Flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm - Drive 400 V / 1.3 / 1.8 kW - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg

Metallkraft MTBS 3100-40 D The Metallkraft MTBS 3100-40 D is a heavy-duty, motorized metal shear designed for industrial use. Cutting Capacity: Maximum cutting length: 3100 mm Maximum sheet thickness: 4.0 mm Construction and Design: Heavy and stable welded construction Low cutting angle (1.3 degrees) for minimal distortion and burr-free cuts Equipped with plastic-coated material hold-downs, manually adjustable width stop, and angle stop Motor and Performance: Motor power: 7.5 kW (10 HP) Voltage: 400 V, 3-phase Cutting speed: 42 cuts per minute Dimensions and Weight: Overall dimensions: 3650 mm x 2260 mm x 1330 mm Weight: Approximately 3600 kg Additional Features: Electrically adjustable rear stop up to 750 mm (optional up to 1000 mm) Ergonomic working height Self-lubricating and adjustable slideways High-quality roller bearings Operated via foot pedal, allowing hands ...

A complete 3D metal printing system is available. 1) 3x 3D metal printers Markforged Metal X, year of manufacture: 2021, printing process: Metal FFF, build volume X/Y/Z: 300mm/220mm/180mm, materials: 17-4PH/H13/A2/D2/Inconel 625/Cu, max. part dimensions X/Y/Z: 250mm/183mm/150mm, max. part weight: 10kg, layer height after sintering: 50µm/125µm, machine dimensions X/Y/Z: approx. 600mm/500mm/1150mm, operating hours: approx. 3300h. 2) Sintering furnace Markforged Sinter 2, year of manufacture: 2021, solvent volume: 18356cm³, max. temperature: 1300°C, washing duration: 17h-31h, machine dimensions X/Y/Z: approx. 1200mm/700mm/1500mm, weight: approx. 350kg. 3) Solvent washing table system LÖMI EDA30 M3D, year of manufacture: 2021, batch volume: 16L, max. operating temperature: 120°C, batch chamber dimensions X/Y/Z: 200mm/216mm/380mm, machine dimensions X/Y/Z: approx. 550mm/800mm/1000mm. In ...

REF-2563 METTLER TOLEDO SAFELINE METAL DETECTOR WITH REJECT SYSTEM Model: Signature. Year: 1999. Aperture: width 500 mm, height 350 mm. Overall dimensions: width 1,500 mm, length 3,200 mm, height 1,250 mm. OTHER SAFELINE MODELS ARE ALSO AVAILABLE. INQUIRE FOR MORE INFORMATION.

Dimensions search coil opening (WxH): 650 mm x 150 mm, Metal-free zone on both sides of the search coil: 75 mm, Inlet length to the metal-free zone: 1,200 mm, Conveyor dimensions (LxW): 2,200 mm x 600 mm, Transport height: 800 mm +/- 50 mm, height adjustable feet, Conveyor belt speed: 25 m/min (adjustable via frequency converter), Conveyor Type: Intralox 1100 Flush Grid - BLUE, Running direction: standing in front of the control panel: from right to left, Degree of protection: IP66, Ejection system: Stop if metal is found with an acoustic signal

Small parts magazine, storage bin shelf, storage bins, drawer magazine -Small parts magazine: Metal drawer magazine with 32 open storage boxes -Accessories: incl. storage boxes/drawers see photos -Number: 1x small parts magazine available -Price: per piece -Dimensions: 310/155/H550 mm -Weight: 4.3 kg/piece

REF-0 LOCK INSPECTION SYSTEMS MET 30+ METAL DETECTOR WITH REJECT SYSTEM Manufacturer: LOCK INSPECTION SYSTEMS Model: MET 30+ Serial no.: 36916-1 Date: 03-2008 Metal detector with integrated rejection system Electrical data: 100/240 VAC; 50/60 Hz; 3 A max. Aperture: width 450 mm, height 100 mm Overall dimensions: 1,290 x 1,050 x 1,170 mm (LxWxH) We have other LOCK INSPECTION detectors available. Inquire for more information.

REF-0 LOMA SYSTEMS IQ3 ST METAL DETECTOR Manufacturer: LOMA SYSTEMS Model: IQ3 + ST Serial no.: Q3B25-25-41021D Year: 2017 Detector electrical data: 100-240 V; 1PH; 50/60 Hz; 0.3 – 0.6 A Conveyor electrical data: 415 V; 3PH; 50 Hz; 3 A Aperture: 250 x 230 mm (WxH) Overall dimensions: 1,850 x 800 x 1,510 mm (LxWxH)

F03 Metal office desk in good condition. ✔️ Specification: Length: 121" L × 76" W × 79" H ✔️ Comes with built-in drawers for storage ✔️ Spacious surface, ideal for office or study use If interested, kindly contact : DAMIA, n.damia@topglove.com.my ARINA arina@topglove.com.my TG MEDICAL SDN BHD - FACTORY F03

Weight: 1600 kg Bj.new Very nice state of use Package dimensions: 20 x 35 x material quantity Hand control To compress copper, aluminum, zinc, etc. Immediately available. More pictures on request, are not the original pictures Year built: new Weight: approx. 1600 kg Built in: 1997 mechanical condition: very well dimension of the baling press: 20 x 35 x l ength of the material to press manual control materials to press: copper, aluminium, zinc etc. The machine is on stock. Every time we have 8 cablestrippers on stock. new an second-hand machines

Tech. Data Nominal press force 1000 kN at maximum stroke adjustment - commute 6.5 mm 1250 kN at maximum stroke adjustment - commute 3.5 mm Strokes with endurance 125/83/63 Hube/min Usable stroke rate 50 50 38 / min. Throat depth 320 mm, clamp 380 mm Stroke adjustment 10-120 mm, Stosselverstellung 80 mm Stosselflaeche 800 x 320 mm, recording journal 50 / 85 Tabletop table top hole, 900 x 630 mm 230 mm, Durchfalloch in the table 300 / 400 x 250 mm Drive - 7,5 / 5,5 kW Bulk 1350 x 2080 x 2780 mm, Btto 8900 kg

Dimensions: 1,200 x 900 x 900 mm (W x D x H) / incl. rolls We offer you here a new workbench of the manufacturer Metal Sistem for sale. Delivery time: approx. 3 - 4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Werbank width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery are: 02x workbench stand, new Material colour: compl. galvanized Stand Type: TS4 incl. transverse and diagonal struts, Base plates The stands are pre-assembled (screwed truss) 723 mm high 700 mm deep 02x workbench trusses, new Truss Type: TS Profile abbreviation: 70 x 42 x 3 mm Clear width: 920 mm Material colour: compl. galvanized 01x Worktop, new Type of wood: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 02x swivel castors, new 02x brake / swivel castors, new  ...

Dimensions: 1,200 x 900 x 900 mm (W x D x H) / incl. rolls We offer you here a new workbench of the manufacturer Metal Sistem for sale. Delivery time: approx. 3 - 4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Werbank width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery are: 02x workbench stand, new Material colour: compl. galvanized Stand Type: TS4 incl. transverse and diagonal struts, Base plates The stands are pre-assembled (screwed truss) 723 mm high 700 mm deep 04x workbench trusses, new Truss Type: TS Profile abbreviation: 70 x 42 x 3 mm Clear width: 920 mm Material colour: compl. galvanized 01x Worktop, new Type of wood: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 03x steel shelves, new Dimensions: 300 x 700 mm Type: H29/D  ...

Dimensions: 1,200 x 900 x 900 mm (W x D x H) We offer you here a new workbench of the manufacturer Metal Sistem for sale. Delivery time: approx. 3 - 4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Werbank width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery are: 02x workbench stand, new Material colour: compl. galvanized Stand Type: TS4 incl. transverse and diagonal struts, Base plates The stands are pre-assembled (screwed truss) 888 mm high 700 mm deep 04x workbench trusses, new Truss Type: TS Profile abbreviation: 70 x 42 x 3 mm Clear width: 920 mm Material colour: compl. galvanized 01x Worktop, new Type of wood: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 03x steel shelves, new Dimensions: 300 x 700 mm Type: H29/D 01x angle ...

Dimensions: 1,200 x 900 x 900 mm (W x D x H) We offer you here a new workbench of the manufacturer Metal Sistem for sale. Delivery time: approx. 3 - 4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Werbank width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery are: 02x workbench stand, new Material colour: compl. galvanized Stand Type: TS4 incl. transverse and diagonal struts, Base plates The stands are pre-assembled (screwed truss) 888 mm high 700 mm deep 02x workbench trusses, new Truss Type: TS Profile abbreviation: 70 x 42 x 3 mm Clear width: 920 mm Material colour: compl. galvanized 01x Worktop, new Type of wood: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 01x angle set, new for attaching the worktop 04x fuse hook, new Mater ...

Technical data: Stand height: 2,000 mm Shelf depth: 600 mm Shelf length: 2,050 mm Usable area: 1,950 x 600 mm Shipping Weight: approx. 130 Kg Consisting of: 2x Shelf stand 2,000 x 600 mm / unassembled 6x Trusses 1,950 mm 6x Steel - Insert - 965 x 547 mm 4x Metal base Specialist load: 400 kg / at evenly distributed load Further attachment shelves of this variant are available for 184 € / piece incl. VAT ! These shelves are also available in other sizes. Let us create a free offer. Shipping possible on request.

METALPRES NHM 3006 hydraulic guillotine shears built in the Czech Republic in 2000, are used for precision cutting of black or acid-resistant steel sheets with a maximum length of 3000 mm. The NHM 3006 T guillotine shears have been regularly serviced and upgraded throughout their lifetime. In 2023, a general overhaul was performed with a net value of approximately PLN 16000, during which seals, clamps, controls, electrical installation with cabinet were replaced and the knives were sharpened. The price of the machine also includes a rack with saw for steel and a rack for sheet metal shown in the photos. The total weight of the METALPRES NHM 3000 3M machine is 2000 kg. Technical specifications of the METALPRES NHM 3006 guillotine shears - maximum cutting length: 3000 mm - maximum workpiece thickness (acid-resistant steel): 5 mm - maximum workpiece thickness (black steel): 6 mm - di ...

Metal detector producer: Safeline model: 50H voltage: 100-240 VAC Freguency 50/60 Hz Power 330 W (Max)

METALPRES KM4E folding machine was built in 1980. Distinguished by its stable, robust construction, the machine designed to fold various types of sheet metal with a maximum length of 2 metres offers excellent quality and precision of machining. The applied manual control together with the angle setting allows the machine to be adapted to the individual needs of the user. In 2023, the METALPRES mechanical folding machine underwent a general overhaul worth around 14000 PLN net, during which the clutch, sleeves, electrical installation including the cabinet were replaced and the knives were sharpened. Technical data of the folding machine METALPRES KM4E - maximum sheet metal length: 2000 mm - maximum sheet thickness (black steel): 5 mm - maximum sheet thickness (stainless steel): 4 mm - technical documentation - dimensions of the machine (L x W x H): 2600 x 1200 x 1700 mm

Cable duct, cable tray, cable channel, cable route, cable profile, protective conduit, protective profile -Cable duct: 61 pieces -Dimensions: 3000 x 50 x 37 mm -Material: Steel, galvanized -Price: complete -Dimensions: 3000/820/H120 mm -Weight: 212 kg

Wire electrode, welding wire, welding wire -Manufacturer: Metallit, shielding gas wire electrode -Type: 308LSI Ø 0.8 mm -Price: per piece -Quantity: 2 pieces -Dimensions: Ø 300/100 mm -Weight per roll: 15 kg/piece

Specifications: - Drilling capacity in steel ST 60 30 mm - Drilling spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/U - Drilling spindle speeds in gear stages 95 - 2000 rpm - Right - Left - Drilling spindle stroke 160 mm - Projection 350 mm - Table with 3 T-slots height-adjustable 340 x 320 mm - Table can be tilted left + right - distance table – drilling spindle 500 mm - distance machined base plate – drilling spindle 1050 mm - Column diameter 160 mm - Lighting - Coolant device - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

Metal Circular Saw Cold Circular Saw Manufacturer Kasto Type GKS400P YOC 1998 Saw blade 400mm coming from below automatic hydraulic vice for material expansion Top condition, ready for immediate use.

Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control

Ceia Metal Detector 450 x 145mm aperture. 400mm conveyor width. Right to left production. Push reject system. New conveyor belt fitted. 730mm line height with adjustable feet. M&S Spec.

CINTEX METAL DETECTOR Usable aperture size 500mm (wide) x 100mm (high) 350mm wide conveyor belt Full length 1200mm Line height 930mm Stop on detect Right to left production direction

360 x 140mm aperture. 300mm conveyor width. 900mm line height with adjustable wheels. 1600mm machine length. Stop on detect. Left to right production.

Safeline metal detector Stainless metal detector, belt dimensions 700mm x 300mm, aperture 350mm x 185mm, stop / start with alarm, mobile, 1Ph