metal scrap used for sale

sheet width: 0250 mm coil outside dia.: 1200 mm weight max. in kg: je 1500 kg sheet thickness - min.: 0,30 mm sheet thickness - max.: 5,00 mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm between stands ca.: 260 mm speed ca.: 28 m/min. drive motor: 2,50 kW coiler: max. width of material: 250 mm range of expansion ca.: 370-430/470-530 mm brake: mechanisch height over floor: 1020 mm total power requirement: 2,70 kW weight of the machine ca.: 2,50 t dimensions of the machine ca.: 3,00 x 1,50 x 1,60 m ARKU Leveler Type 30/25/9 ARKU Double Uncoiler Type AH 1500/2/ST - Automatic circulating oil lubrication for drive shafts and leveling roll bearings - Electromagnetic clutch - Expansion range: 370–430 mm without bolt-on segments, 470–530 mm with bolt-on segments - 1 pair of driven strip feed rolls - Exit roll cradle - Max. vertical roll gap: 10 mm - Control via proximity swi ...

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/420 with saw band welder -Cutting width: max. 400 mm -Cutting height: max. 230 mm -Motor power: 1.1/1.7 KW -Voltage: 380 volts, 50 Hz, 4.6/3.6 A -Band saw: length 3150 to 3260 mm -Band saw speed: adjustable -Work table: pivotable in 2 axes: -Band saw welder: Ideal BSO -Dimensions: 940/750/H1850 mm -Weight: 548kg

Key data: 120 mm, 1 mm

- Max. belt width – 120 mm - Sheet thickness - 0.1 – 1.0 mm (40 kp/mm2) - Speed 6 - 36 m / min - ( 10 cm - 60 cm/ s ) - Guideline Cross section – 100 mm2 - Conveyor inlet – left - Control – Start-Stop - Roller mill adjustment – motorized - Mobile version - Drive 0.55/0.75 kW - 750 / 1400 rot/ min - Original documents Btto – 400 kg

6 pallets with a.o. Welding plates, lifting shafts, corner pieces and the like Auction-ID: A1-50251-61

As well as frame and rear wall on 2 shipping containers (used as a shelter) Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-357

Technical data Manufacturer: Behringer Type: HBP 220 Design: horizontal metal band saw machine Dimensions L × W × H: approx. 1,900 × 1,100 × 1,800 mm Weight: approx. 1,500 kg Configuration With workpiece clamping device, saw blade protective covers, pressure indicators, adjustable saw feed, separate control console with push buttons, main switch and emergency stop as well as machine light. Remarks The machine comes from a plant closure, was actively used in production until the end and was electrified. Auction-ID: A7-50403-16

Automatic lowering. Left and right absent. Demo model; unused! Auction-ID: A1-40982-150

Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-356

In a free fall, separate the metals from the substance. Auction-ID: A1-49862-19

In a free fall, separate the metals from the substance. Auction-ID: A1-49862-18

Consisting of 3 gitterboxes with various sizes of plastic blocks 2 metal stacking bins, various sizes of plastic blocks and various Auction-ID: A1-50251-427

Auction-ID: A7-50270-175

Contents of canopy consisting of wire steel gitter boxes, crate pallets with various metal, welding screens Auction-ID: A1-50251-395

Hardening oven Model: Electric Manufacturer: Reinhardt Type: E2 Year of construction: 2009 Working temperature: 50-300 degrees Workspace: 0.21m3 Opening size: 650x650mm Voltage: 3x400V Motor: 0.55kW Auction-ID: A1-40982-78

Wooden compartment cabinet with various metal parts and accessories. Including welding jigs, hinges, plates Auction-ID: A1-50251-27

Consisting of 4 corner profiles with slotted holes, length approx. 70x20 cm 2 metal bins with lifting eyes, 1 of which has a lid dimensions approx. 100x81x67 cm Auction-ID: A1-50251-385

In a free fall, separate the metals from the substance. Auction-ID: A1-49862-17

Underfloor miter saw with feed and discharge conveyor As well as wall board with tools Auction-ID: A1-50251-307

Automatic lowering. Left and right absent. Demo model; unused! Auction-ID: A1-40982-149

Consisting of: H-beams, corner profiles, tube, tube, flat steel in and with cantilever rack, old iron box and mesh box. The visible roller conveyors are not included. Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-389

Consisting of: H-beams, corner profiles and frames Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-393

Consisting of: H-beams, roller conveyor, corner profiles and parts of a casting mold Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-392

Metal frames, frame parts, beams and the like As well as gitterbox with steel and crate pallet with steel Tipping bucket with content Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-397

Consisting of: dismantled overhead crane, H-beams, corner profiles, scaffolding parts wheels and various small scrap metal Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-402

Auction-ID: A1-47364-113

equipped with profile steel base base; capacity around 11 mm; capacity flat 5 mm; Auction-ID: A1-44050-25

Various rod material, foam strips and profiles Auction-ID: A1-50251-309

Double mitre metal band saw with Pehu 550 control With inlet roller conveyor dimensions approx. 155x73 cm And removal roller conveyor approx As well as wooden stairs Auction-ID: A1-50251-21

Consisting of 4x metal trestle with contents of various metal including beams, tube Garden bench, canteen chair and wooden side tables Contents of old iron container Gitterbox Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-383

Complete coating line including: Feeder Mailander 460 coater, year 1981 GAS oven 30m, year 2000 Double stacker Bundle turner Max sheet format 1145x980 Upgraded with pneumatic system for feeding

Set of 5 packs each with 2 door handles, i.e. 10 handles in total. New products packaged in blister packs. Auction-ID: A1-50192-75

With roller stand Auction-ID: A1-44050-196

Set of 8 packs each including 2 white wooden and metal door handles, for a total of 16 handles. Auction-ID: A1-50192-77

Technical data Manufacturer: BEHRINGER Type: HBP 260 A Year of Make: 1989 Configuration Horizontal metal band sawing machine with material feed via rollers. Hydraulic workpiece clamping and feed device. Control panel with push buttons, selector switches, emergency stop and main switch. Pressure gauge for pressure display. Protective hoods on both sides of the sawing area. BEHRINGER operating instructions available. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-50403-159

Technical specifications of the sheet metal nibbler. Motor power 625 watts. Maximum cutting capacity in steel 3 mm.Maximum cutting capacity in stainless steel 1.8 mm.Shape of the stamp, rectangle The HBM E nibblers are supplied as standard with: Practical storage case. Universal adjustable nibbler head. Extension for handle. Set of additional carbon brushes. Condition: never used / new (5) Auction-ID: A7-50523-753

Auction-ID: A7-50403-164

Set of 4 packs each including 2 metal door handles, for a total of 8 handles. Auction-ID: A1-50192-74

ALMA model console table in wood and black metal, equipped with two storage drawers. Dimensions: 100 × 75 × 30 cm. Auction-ID: A1-50192-82

DIN 338, 5% Co, 1.0-13.0mm, high quality drill bit set in metal box, new Auction-ID: A1-40421-162

DIN 338, 5% Co, 1.0-13.0mm, high quality drill bit set in metal box, new Auction-ID: A1-40421-159

Arntz Blue Line saw blade Length: 5800 mm Specification: 41 x 1.3 mm 2/3 K Carbide band saw blades with pre-cutting and post-cutting geometry for machining non-ferrous metals and graphite. The specialist for: - Aluminium alloys - Aluminium bronzes - Copper alloys - Sand-cast aluminium and magnesium castings - Graphite

working width:1400 mm Workpiece thickness max.: 80 mm work height max.:1000 mm Feed speed:4m/min I Stufe, 8 II Stuf m/min. Required air-pressure:max. 5 bar voltage:50 Hz, 380 V workpiece length:320 mm workpiece thickness min.:1 mm weight of the machine ca.:3500 kg Documents:vorhanden

working width:880 mm workpiece height:1- 70 mm work height max.:1000 mm Feed speed:4- 8 m/min. voltage:50 Hz, 400 V weight of the machine ca.:2.800 kg dimensions of the machine ca.:2500 x 1715 x1675 mm width:min. 350 mm Sanding cylinder diameter:420 mm electr. connected load:20 KW Required air-pressure:1 x R3/ 8 " pressure:5 bar tank:des Bandfilter ca.200 l automatic magnetic filter unit:vorhanden grinding tools:1540 x 900 mm accessories::9 Bänder Documents:vorhanden

Fitted with: Anilam Wizard 350 Plus digital readout (DRO) Table power feed Machine vice Large selection of R8 collets and tooling as pictured Coolant system 2HP variable-speed head R8 spindle 380V 3-phase power The machine is in great condition throughout and has been well looked after.

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...