126,710 used machines on RESALE, but how to find them? Machine Search
Various accessories for saws in professional woodworking are offered - consisting of replacement profile cutter heads (partly from Leitz-Variform, as good as new and partly in original packaging). If requested, individual sales may also be possible. The accessories are currently located in Magdeburg and are being sold - due to a restructuring. Only the accessories offered are expressly sold, any items shown in the photos are expressly not part of the scope of the offer. The offer prices are to be understood as gross prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, to which we expressly refer.
Fields K7 Sliding table saw Motor power: 400V 7 KW, 50HZ Format sliding table: 2.3 m Cutting height: 103mm Saw blade: swivel, max. 315mm WJ-400105 Boom Table with Telescopic Stop Folding Stops Upper protective hood Year of manufacture 1997
Max. saw blade diameter: 250 mm Manual material tensioner Saw blade lubrication
Max. cutting length: 5,000 mm Max. saw blade diameter: 400 mm Digital length display Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation
Max. saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 hand control Pneumatic material tensioners Minimum quantity spraying device Table can be rotated on both sides with detent points at 45° Roller conveyor and stops on request
The machine is from the year of construction 2014/6 (demonstration machine) Commissioning was in 2017 Cutting range round – 75 mm Rectangle – 60 mm Saw blade dimensions approx. ø 285 x 2.0 (D) x 1.7 (t) mm T = Waste; t = strength ; Hole 32; 4x11 at 63 mm Blade speed inverter monitors 30- 150 rpm Blade motor 7.5 kW Hydraulic system 1.5 kW Coolant system Oil mist lubrication Blade feed system servo motor and ball screw Material support 1,200 x 5,200 mm Bar feed: servo motor and ball screw Automatic index single stroke 6 – 600 mm Multiple stroke up to 3,000 mm Automatic Chip Conveyor Chain Conveyor Machine weight, incl. table 2,800 kg Length tolerance +/- 0.1 mm Cutting accuracy +/- 0.1 mm Remnant Standard 75 mm Loading capacity 13 x ø 75 mm rods Max loading width. 1,000 mm Accessories: Chip conveyor, air purification, loading magazine (still under power ...
Key data: 300 mm
Saw blade diameter max. 300 mm Speed setting 2 levels: 17 and 33 rpm. Weight 450 kg
Feature VMS II Cut at 90° (flat) approx. 140 × 70 mm Cut at 90° (round) approx. 80 mm Cut at 45° approx. 100 × 70 mm (flat), round: 80 mm Speed 40/80 rpm Coolant available Power approx. 1.4 kW (up to 2 kW) Weight approx. 400 kg (depending on version: 270–500 kg) Dimensions (L×W×H) approx. 1.0 × 0.75 × 1.6 m
Key data: 400 mm
Saw blade diameter 400 mm Cutting diameter 130 mm Cutting area at 90 degrees: square 120 x 120 mm Cutting area at 90 degrees: flat 220 x 80 mm Feed length 600 mm Feed length multiple 1800 mm Cutting speed 10/13/15/20/26/30 m/min Miter cuts -/+ grade 60 Total power requirement 5.5 kW Machine weight approx. 2,600 kg - with mitre adjustment +/- 60 ° with digital display - Accessories: roller track, documentation, various circular saw blades
Key data: 280 mm
Specifications: Maximum diameter 280 mm Maximum dimensions rectangle 300×280 mm Maximum dimensions bundle 250×100 mm The DoALL NC-Line is a range of machines designed and built for general sawing operations in manual or automatic mode. For ease of use, these machines are already equipped as standard with a 2-metre roller table, a chip conveyor, a variable clamping force control, a double-retractable index chuck, a work light and a toolbox. PLC control for all electrical and hydraulic functions. Color touchscreen control panel with alarm messages Infinitely adjustable belt speed, controlled by an inverter Impeller motion detector with saw blade blocking and band break switch Shuttle automatic feed and sliding work table with castors Hydraulic Belt Tension Two-stage lifting clamping devices Split front screw clamp Double-retractable index screw clamp Working height se ...
Key data: 670 mm
Cutting range 90° 670 x 670 Specifications Material feed length (single stroke): 2000 mm Saw blade dimensions: 8450 x 67 x 1.6 mm Saw blade speed: infinitely variable: 15–120 m/min Cutting speed: infinitely adjustable: 5–1200 mm/min Belt drive motor, 11 kW, frequency-controlled Total connected load: 18 kW Positioning accuracy: ± 0.01 mm Index speed: 200 mm/s Minimum saw diameter: 25 mm Material passage: 850 mm Overall dimensions (XL-3000 version): 5600 x 4420 x 3070 mm Weight (approx.): 9300 kg
Cutting length: 3100mm, machine dimensions X/Y/Z: approx. 4800mm/1200mm/1300mm, weight: approx. 800kg. An on-site inspection is possible.
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Fully automatic hydropneumatic machine · Left/right miter cuts · Head bevel cuts up to 45° (shifter) · Material feed unit with material clamp · Integrated coolant spray system · MPS control: · Saves cut start/end times · Displays power consumption, workpiece count, cutting time, etc. · Adjustable water cooling · Cutting pressure regulator The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: KASTO Model: Twin A 4 AU CNC Year of Manufacture: 2004 Cutting Capacity: 400 mm x 400 mm (Ø 400 mm) Technical Specifications - Cutting Range Round: 400 mm - Cutting Range Square: 400 x 400 mm - Material Feed per Stroke (automatic): 600 mm - Multiple Feed Length: 99,999 mm - Cutting Speed: Stepless, 20–130 m/min - Total Drive Power: 7 kW - Saw Motor Power: 4 kW - Speed Reduction: Stepless adjustable - Material Height: 100 mm - Saw Blade Dimensions: 5700 x 41 x 1.3 mm - Shortest Cutting Length (automatic): 6 mm - Shortest Remnant Length (automatic): 80 mm - Voltage: 380V / 50Hz - Machine Dimensions (LxWxH): 2415 x 2400 x 1720 mm - Weight: 2200 kg Special Accessories - Coolant system - CNC control - Idle run monitoring - Machine roller table - Band tension control - Height measurement system - Light barrier - End stop Optional Roller Conveyors: - Roller Conveyor 30 ...
Bernardo Specifications Cutting range around 90° 125 mm Cutting area flat 90° 100 x 150 mm Cutting range around 45° 95 mm Cutting area flat 45° 95 x 76 mm Cutting range around 60° 50 mm Cutting area flat 60° 50 x 56 mm Working height 730 mm Saw blade dimensions 1638 x 13 x 0.65 mm Cutting speeds 23 / 34 / 54 m/min Engine output S1 100% 0.55 kW Motor input power S6 40% 0.75 kW Voltage 230 V Machine dimensions (L x W x H) 1000 x 550 x 1100 mm Weight approx. 68 kg
Panel saw Type: F45 EvoDrive Manufacturer: Altendorf Year: 2019 Control: Evo Drive Sliding table 3200 mm CNC controlled parallel ruler, electrically adjustable 0 - 1300 mm Miter ruler extendable up to 3200 mm Main motor power 5.5 kW / speed 3000/4000/5000 rpm Max. blade Ø: 500 mm (without pre-cut) Max. cutting length: 3200 mm Automatic calculations for oblique and bevel cuts Simple, intuitive, with quick access to functions Machine equipment: 2-axis pre-cutting unit (0.75 kW motor) Increase in main motor power to 5.5 kW CNC parallel ruler - cutting width 1300 mm Extension of sliding table to 3200 mm CLIPBOARD cutting plan holder Angle ruler - bevel cuts up to 49° Start/Stop switch directly on the carriage Machine in good condition, fully functional Find more here - / Contact us at -
Max. saw blade diameter: 400 mm Pneumatic material tensioners
Pull saw on substructure with mobile device (support table / wooden system) Further dates will follow. The sale is carried out on behalf of the owner from the current location in the "current state"
CONTROLS PLC TECHNICAL SPECIFICATION max. cutting height: 360 mm sawband length: 5334 mm sawband width: 41 mm max. bar feed (single stroke): 600 mm cutting speed min.: 14 m/min cutting speed max.: 102 m/min power of band drive: 5.5 kW ELECTRICAL SPECIFICATIONS total power consumption: 10 kW DIMENSIONS / WEIGHTS space requirements -left/right-: 2840 mm space requirements -front/back-: 2800 mm total height: 2130 mm total weight approx.: 2540 kg
Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible.
Sliding table saw ALTENDORF F45 -used-double trolley, swivelling, rip fence with fine adjustment, boom table, table extension anodised aluminium, table extension anodised aluminium, angle mitre stop, upper protective cover narrow and wide---------- Technical data ----------swivel range: 45 Â, carriage length: 2,500 mm, cutting width: 800 mm, max. saw blade Ã: 450 mm, motor power: 5.5 kW, extraction nozzle Ã: 80 / 120 mm
Band saw CENTAURO SP600 AVAILABLE FROM JANUARY 2026
A lifting, filing, and sawing machine Hakumag is available. Table dimensions X/Y/Z: approx. 290mm/290mm, stroke: 10mm–80mm, throat depth: 155mm, table swivel: +/-15°, weight: approx. 120kg. An on-site inspection is possible.
Manufacturer: Behringer Model: HBP 420-723 G Year of Manufacture: 2004 Operating hours : approx. 15,800 hours Including powered roller conveyor Silberland B 660 / 15 m (built in 2010) Rated Voltage: 400 V Frequency: 50 Hz Rated Current: 20 A Control Voltage: 24 V DC Technical Data Working Range: - Round at 90°: Ø 420 mm - Flat at 90°: 720 × 420 mm - Flat at 75° left: 710 × 420 mm - Flat at 60° left: 650 × 420 mm - Flat at 45° left: 550 × 420 mm - Flat at 30° left: 350 × 420 mm - Flat at 60° right: 650 × 420 mm - Flat at 45° right: 460 × 420 mm Smallest Cut-off Length (90°): - Manual: 10 mm Cutting Speed: - 17 – 120 m/min (stepless adjustment) Saw Blade Dimensions: - 6300 × 41 × 1.3 mm Band Tension (hydraulic): - 950–1200 N/mm² Motors: - Saw Drive Motor: 5.5 kW - Hydraulic Motor: 1.5 kW - Coolant Pump: 0.12 kW - Chip Conveyor: 0.5 kW Electrica ...
Manufacturer: BEHRINGER Model: HBP 410-723 G Year of Manufacture: 2014 Operating time: approx. 5,900 hours With automatic supply and removal Electrical Data: - Rated Voltage: 400 V - Frequency: 50 Hz - Rated Current: 36 A - Control Voltage: 24 V DC Saw Band Dimensions: - 6,300 x 41 x 1.3 mm Technical Data: - Working Range Ø / flat at 90°: 410 mm / 700 x 400 mm - Working Range Ø / flat at 75° left: 410 mm / 660 x 400 mm - Working Range Ø / flat at 60° left: 410 mm / 580 x 400 mm - Working Range Ø / flat at 45° left: 410 mm / 450 x 400 mm - Working Range Ø / flat at 30° left: 300 mm / 300 x 300 mm - Working Range Ø / flat at 75° right: 410 mm / 660 x 400 mm - Working Range Ø / flat at 60° right: 410 mm / 580 x 400 mm - Working Range Ø / flat at 45° right: 380 mm / 450 x 380 mm Minimum Residual Piece Length: 45 mm Cutting Speed: 20 – 140 m/min Feed Pressure (B ...
Kasto Twin U 4 Depth of throat: 400 mm Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm Power needed: 6 kW
Max. saw blade diameter: 400 mm Pneumatic material tensioner Manual feed
formatkreissägen mit schwenkbarem sägeblatt SICAR 350 Neue Maschine Bereit zur Auslieferung SUPER RABATTPREISE mit Vorritzaggregat : Ja digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz CE-Vorschriften: JA mit Bedienungsanleitung und CE-Erklärung Volt. 380/50 Auf-/Ab- und 45°-Neigung der Sägeblätter manuell digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz schlitten mm. 3200 unabhängige Motoren hauptmotorleistung PS 7.5 motorleistung Vorritzaggregat PS 1 max. Sägeblattdurchmesser mm. 350 durchmesser Vorritzaggregat mm.120 Max. Schnitthöhe bei 45° mm. 92 Max. Schnitthöhe bei 90° mm. 120 Max. Schnittbreite an Parallelführung mm.1250 volt. 380/50
Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Instruction manual included Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg
Opus 550 TF Table dimensions: 600 x 760 mm Depth of throat: 550 mm Max height of workpiece: 430 mm Sawspeed: 120x1200 m/min Length of band saw: 4700 x 27 mm Power needed: 4.2 kW Weight: 900 kg
minimax si x 32A3 UPx Sliding table saw Trimming length 1200mm Sliding carriage 3200 x 360 mm Format cuts 3200 mm Cutting width with rip fence 1270 mm Max. cutting height +90°: 136 mm Max. cutting height +46°/-46°: 97/60 mm Motor 400V 50Hz 7kW Speed main saw blade: 4000 rpm Suction Nozzle Diameter: 120mm & 80mm Weight: 936kg G&STÜ-5508783
A double mitre saw from the Chinese manufacturer Mange Jixie with digital display is available. Power: 4.8kW, pressure: 0.8MPa, cutting length range: 480mm-6000mm, saw blade outer diameter: 500mm, inner diameter: 300mm, blade thickness: 4.2mm, number of teeth: 120, feed rate: 2-3m/min, blade speed: 2840rpm, weight: approx. 1800kg. An on-site inspection is possible.
Length: 5.25 m, 2 cm height, 3 teeth per 1 inch, Ready to saw: toothed, set, ground - ready for use, endlessly welded
Offer 25318 Specifications: - Manual band sawing machine - Saw blade dimensions 2375 x 20 x 0.9 mm - 2 cutting speeds N 33 / 66 rpm - Max. clamping possibility 205 mm - Mitre adjustable li + re 30 ° - Cutting range - 90° round 160 mm - Square 160 mm - flat 200 x 100 mm - 45° li + re round 140 mm - flat 140 x 60 mm - Drive 400 V / 1.5 / 1.8 kW - Coolant device - Discharge roller conveyor with stop 3000 mm - Feed roller conveyor 1500 mm - Weight approx. 350 kg - Space requirement approx. W 1100 x H 1700 x D 1550 mm
Graule ZS 135 Pull Saw - Technically outdated - 400V version - With brake motor - With saw blade protection - new support plate, original Graule - without base frame
Key data: 360 mm
SPECIFICATIONS Max. cutting height: 360 mm Saw blade length: 5334 mm Saw band width: 41 mm Max. bar feed (single stroke): 600 mm Cutting speed of: 14 m/min Cutting speed up to: 102 m/min Saw blade drive power: 5.5 kW Power consumption 10 kW Space requirement -left/right-: 2840 mm Space requirement -front/rear-: 2800 mm Total height: 2130 mm Total weight approx.: 2540 kg from warehouse 95643 Tirschenreuth, loading free Shipping possible, transport costs are borne by the buyer The price includes 19% VAT! This will be shown separately in the invoice. This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. No returns for used goods! No warranty. A viewing of the goods is possible by arrangement. If you have any questions, please send us a message, we will answer as soon as possible. Thank you very much! Changes / errors in the techni ...
Key data: 350 mm, 110 mm
Like new: Saw blade: ø 350 mm Saw Capacity: 110mm Round / 100mm Square Saw Angle: 45º Left/Right Sawing speed: 18 / 36 rpm Equipped with: - Coolant system - Pneumatic clamping - Variable feed rate -Saw blade Country of origin: Germany Motor power: 1.8 kW Machine LxWxH: 800 x 1000 x 1850 mm Machine weight: 800 kg
I sell an automatic pneumatic Weinig Grecon Dimter Opticut 200 Elite Built in 2006. Motor power 7.5kW Entrance table automatic 4.10m (continuous system) Exit table automatic 6 ejectors on the right outlet table. Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. CE equipment. Documents included.
A hydraulically operated high-performance bandsaw with two-column guide and full enclosure. Cutting range: 260×260mm, cutting speed: 20–110m/min (infinitely variable), weight: approx. 1700kg. Machine dimensions: approx. 1800×2200×1600mm. An inspection can be arranged by appointment.
Offer 25359 Specifications: Cutting range at 90° around 250 mm - flat 275 x 180 mm - Mitre adjustable left Schnittb. at 45° around 200 mm - Schnittb. flat at 45° 190 x 180 mm - Schnittb. flat at 30° 130 x 110 mm - Material support height approx. 920 mm Saw blade dimensions 3100 x 27 x 0.9 mm Cutting speed infinitely variable 15 to 100 m/min hydr. Lifting – lowering the saw frame Upper stroke limit of the saw frame Cutting pressure infinitely adjustable 0 - 10 m/min hydr. Material vise Micro Spray Coolant Device - Total drive power 400 V / 2.2 kW - Space requirement approx. W 2400 x H 1600 x D 1800 mm - Weight approx. 1300 kg - 3 x roller conveyor 1500 mm
Sell different machines in a package at a low price - MEIKO FV 40T dishwasher only ran a few times, it's virtually new - MAINCA SM-182, built in 1999, bone band saw almost new, not much used either - MAJA ESB 441, built in 1991, belt detractor runs smoothly - RÜHLE Tumbler - Suspension trolley In addition, a FREY filling machine with a new circuit board would also be available. All machines are a bit older, but in a very neat and good technical condition. If you have any questions or take more photos, please just get in touch.
Emmegi under-table cross-cut saw with automatic stop Type: Calvet 300 M saw blade coming from below max. saw blade diameter 300 mm with automatic stop – Fence pushes the clippings onto the the cutting position right long table with automatically movable stop left long roller conveyor Weight approx. 500 kg with stop table and roller conveyor
Brand: SICA Type of Machine: Planetary saw Model: TRC/S/SY/U 63-400 Year of manufacturing: 2000
Dismantling Saw Freund K18-01, Model 01-03 with cutting depth adjustment, Connection 230V, weight approx. 10kg, good used condition, fully functional
Part number 7803 SPECIFICATIONS - track length 10000mm - max thickness (piles) of the processed raw material 800mm - motor power 12kW -brake - feeder feed smoothly controlled, inverter - Thrust arm assembly 5pcs - Log clamps (fender stanchions) 1pc - saw length 4818mm - saw width 32-38mm - saw blade thickness 1.1mm -wheel diameter 600mm - Cooling of saws - emergency disconnection - with self-loading feeder - machine dimensions l/w/h 10000x2250x2600mm - weight approx. 1700kg ADVANTAGES – smooth feed on the inverter – electrically adjustable cutting thickness – automatic programming of cutting thickness Selbit ISP-010 – original DTR + CE documentation – used sawmill, very good condition, unpainted Net price: 33900 PLN Net price: 8071 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)
JRIMAC Slitting Saw "TOP" - NEW - · Cutting length 2200 - 9200 mm · Cutting width 420 - 2120 mm · Cutting direction left - right (on request right - left) · Cutting height max. 210 mm with high-quality saw blade Ø 620 mm. · Precise and clean cut due to strong, self-supporting welded construction of the machine stand. · Carriage guide via linear guides, with ball-bearing, maintenance-free rollers. · Safety beam mounted above the machine table with 6 mm thick slat protection. · Suction connection Ø 160mm installed at table height at top right and bottom left ready for connection. · Flexible and efficient working thanks to the 250 mm opening of the slat guard above the top edge of the table. · Stepless, frequency-controlled, performance-stable feed of the carriage. · The max. feed speed can be adjusted. · Automatic stepless saw blade height adjustment. · Stepl ...
JRIMAC Slitting Saw STANDARD -NEW- - Cutting length: up to 6,200mm - Cutting width: 420 - 2,120 mm - Motor power: 11/15 kW - Cutting height: 175 mm - Precise, clean cut - Cutting accuracy +/- 0.5 mm - Hold-down device with extremely strong slat protection, and extraction connection - PLC machine control - Stepless, frequency-controlled, power-stable feed motor - Convenient semi-automatic saw blade height adjustment - Stepless width stop adjustment - Saw blade quick clamping system "JRIMAC" - Front table support made of plastic or solid wood - Force-guided splitting wedge - Lower standard extraction duct installed ready for connection - CE compliant, dust tested - Processing of more than 12 different materials possible - Reliable spare parts and customer service
maximum number of results exceeded
please refine your search
