metal saw used for sale

Weibert WBBS 555 profi Log band saw The log band saw is intended exclusively for sawing soft, hard, dry and frozen materials, logs or prismatic workpieces. Their length depends on the design of the machine. The material is laid on the supports of the railway path and fastened. The sawing unit is fed manually. Max. trunk diameter 555mm Max. board width 530mm Max. saw blade stroke 540mm Min saw band stroke 20mm Max. cutting depth 220mm Cutting length 3.7m Min. cutting length 0.9m Motor power drive 5.5 kW Impeller-D: 400mm Wheel width: 25mm Saw blade: 3200 x 27 x 0.9mm Waste 1.5-2.2mm Saw band speed. 15 m/s Electric height adjustment of the band saw blade Width 1750mm Height 1450/1660 Weight 360kg WJ-WBBS-555 Optional: Extension section 2.3m Aspirator Swivel bar

Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment Stable 50 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scoring blade with 1 ...

Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: C45-300E Economy New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 380 mm Grid carriage locking system with operation at the end of the carriage. Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable swivel guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment stable 35 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 3 ...

Type: PSU 450 G Country of origin: Germany Saw blade Ø mm: 450 Machine No.: 525/2 Type No.: 47301H0004 Conversion m/min: 10/20 Connection voltage: 400 V / 50Hz Weight approx. kg: 1170

Bundle clamping device manual

Bandsäge Karl Müller Cutting width 70 cm Cooling 2 cutting speeds Weight 400 kg Length 2 m Width 0.80 m Height 1.20 m

Wood band saw, band saw machine, band saw, vertical band saw -Band saw: Vertical band saw -Drive: 5.5 kW -Cutting width: max.780 mm -Cutting height: max.300 mm -Saw band: length 5500 mm -Dimensions: 1800/875/H2440 mm -Weight: 870 kg

Veneer saw, veneer saw machine, jointing machine, fine cutting machine, fine cutting circular saw, Veneer saw drive motor -Veneer saw: SF Scheer drive motor EM 21 -Drive: 1.6 kW 2820 rpm -Dimensions: 265/270/H255 mm -Weight: 24 kg

Cross-cut saw Dewalt 220 V The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Circular saw Frommia 630 Length 1.20 m Width 1 m Height 1 m Attack Roller table Saw blade

Aluminum circular saw, chop saw, glazing bead saw, aluminum saw,machine -Manufacturer: Alfred E.Gohl, glass bead saw type GLS -Saw blade: Ø 225x2.0x32 mm -Drive: 1.1 kW -Speed: 3000 rpm -Dimensions: 1100/650/H1350 mm -Weight: 152 kg

Eisele cold circular saw LMS2 Voltage 380 V 16 A Speeds: 1700 - 3400 rpm Good condition

Eisele cold circular saw LMS 2 380 V 16 A 1700 - 3400 rpm 1 clamping jaw without locking

Band saw JAESPA AS8 Blade length 5300 - 5500 mm Width 34 mm 16 A 380 V Length 1.50 m Width 1 m Height 2.50 m Tiltable table Speed indicator

Eisele LMS 1 Speed 4000 rpm 380 V 16 A Untested without plug Swivel table Vice

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: Rix, RIX-HSS saw blade with SK40 mount -Size: 350xx3x32mm -Number of teeth: 96 teeth -Dimension: Ø 350 x 175 mm -Weight: 4.2 kg

Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 90 x 90 mm Mitre cutting area at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Space requirements: 850 x 600 x 1600 mm

Carpentry cross-cut saw Gama 65S Cutting height 245 mm SIDE TABLES WITH ALUMINIUM PROFILES OF 3 M EACH LEFT AND RIGHT

Crosscut saw, pull saw, miter saw, plunge saw -Remark: Unit made of slats/blinds production, without control -Saw blade: Ø 188 mm -Individual components: see photos -Dimensions: 1390/620/H1130 mm -Weight: 576 kg

SPECIFICATIONS: 2 saw blades Ø 250 mm (2.2 Kw each) 2 saw blades Ø 350 mm (2.2 Kw each) Speed: 3800 rpm Machinable length: min. 200 mm-max. 1200 mm With chip transport carpet

Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...

Very robust and easy-to-use machine for dividing panel-shaped wood-based materials. - welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - long middle support on optimal Height - Fixation for vertical and horizontal cut - Two scales for adjusting the Cutting width for horizontal cutting - Powerful, low-vibration motor Cutting length horizontal mm : 4.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 5.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 5300x2750 mm

Radial saw MAGH-OMGA RADIAL 700, engine hp 3 , reach 700mm Not to CE standards, for export

Mitre saw Brand: Graule Type: H8 J2 169 saw blade Ø 250mm swivable saw blade 45 °

Mitre saw Brand: Hebö Type: TA 131 Year: 1999 technical data: adjustable +/- 45° 400 V, 50Hz saw blade Ø approx. 400 mm 2 clamping cylinder extended workpiece support left- / right side each 840 mm 2 stops Note: The specifications and descriptions are a copy of the order confirmation at that time. Datas are for information and are not binding.

Saw blade, wood saw blade, circular saw blade -Manufacturer: Leuco, saw blade HW -Type: 250x3.2/2.2 Z40 113 1 4 -Speed speed: n max. 7500 rpm -Dimensions of box: 320/320/H20 mm -Weight: 0.9 kg

CATALOGUE NO. 7015 TECHNICAL SPECIFICATIONS - max diameter of the main disc with undercutter 350mm - max cutting height 100mm - main dial adjustable up / down - spindle diameter 30mm - spindle locking - with format trolley - cutting length on the trolley 2800mm - cutting width at the guide 1030mm - with sidecar - with undercutting machine - max diameter of the scoring machine 100mm - spindle diameter 22mm - scoring motor 0,75kW - main motor 5,5kW - 4 types of rotation speeds 3000, 4000, 5000, 6000, rpm - diameter of extraction connection 120mm, 60mm - table top dimensions 1220x730mm - table top dimension with widening 1220x1150mm - shield cover - dimensions length / width / height 2880x2800x1100mm, - weight 961kg – German production – unpainted – used saw, very good condition Net price: 16900 PLN Net price: 3798 EUR depending on the price 4.45 EU ...

- welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - Powerful, low-vibration motor Cutting length horizontal mm : 5.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 6.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 6300x2990 mm

• Description: Good properties for profile cuts • Stop: 2000 mm • Power: 400V 2.7 A • Dimensions: 3050 x 1550 x 2000 mm • Weight: 2800 kg • Operational since: 6.5.1992 • Accessories: 2000 mm stop

cutting diameter: 105 mm saw band length: 1140 x 13 x 0,65 mm cutting width: 100/100x105 mm capacity 60 degrees: round: mm capacity 45 degrees: flat: 55 x 55 mm capacity 45 degrees: round: 60 mm total power requirement: 0,18 kW weight of the machine ca.: 18 kg dimensions of the machine ca.: ca.400 x 300 x 350 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 185 mm saw band length: 2.080 x 20 x 0,90 mm cutting width: 100x185 mm connected load frequency: 230 V band speed: 35 und 70 stufenlos m/min mitre joint 90° (angle-iron till): 60 ° total power requirement: 2,35 KW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280 x 550 x 1480 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw ...

Width of the feed carpet 300 mm Max saw blade diameter 350 mm min. cutting length 390 mm variable cutting speed, feed carpet speed adjustable 6-48 m/min Power 25,5 kw 35 hp 35 HP

Vice for cold circular saw, saw vice -Vise: from a cold circular saw manufacturer FCB type OMP 06 -Dimensions: see photos -Dimensions: 700/200/H200 mm -Weight: 28kg

Vertical panel saw 5200 x 2200/2100 mm 4 kw motor Panel saw with pliers For trimming pruning

- technically efficient, ready to work - after full service - motor power: 0,5 kW - disc diameter: 175 x 20 mm, 95 x 20 mm - pneumatic profile clamping

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350 x 200 saw band length: 3375 x 27 x 0,9 mm band speed: 18 - 110 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,61 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade, wood saw blade, circular saw blade -Manufacturer: Guhdo, saw blade HM NE PRO -Type: 350x3.5/3.0 Z108 -Article No.: 2185.351.31 -Speed: n max. 5400 rpm -Use: non-ferrous profiles/plastics -Dimensions box: 385/385/H10 mm -Weight: 2.4 kg

Sliding table saw Altendorf TRK 45 Year of construction: 1986 S/N 86-9-209 checked in our workshop for normal operating condition Carriage length: 1350 mm Height and swivel adjustment manually with handwheel Motor power: 5.5kW Cutting width: 1250 mm 4 speeds 3/4/5/6000 rpm, Blade diameter max mm: 450 ( without scoring machine ) with scoring Automatic engine brake Weight approx. 1100 kg Technical specification subject to change + 2 additional saw blades

Saw blade, wood saw blade, circular saw blade -Manufacturer: AKE, saw blade HM NE PRO -Type: Ø 350x3.5/3.0 x 32 Z92 = T 11.95 -Art. No.: 0507-1064541X HW -Speed: n max. 5400 rpm -Dimensions box: 390/390/H10 mm -Weight: 2.3 kg

Saw blade, wood saw blade, circular saw blade -Manufacturer: EDN, saw blade HW 12 / 1459 -Type: Ø 400x4.0x32 Z96 = T 11.95 -Speed: n max. 5000 rpm -Dimensions box: 480/460/H15 mm -Weight: 3.1 kg

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15 - 70 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m SPECIAL PRICE! High-performance vertical circular saw VKS 370 (20177/201178) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling · Metal handle for high clamping force · Solid, strong cast iron table · Spring pack · Chip removal brush ATTENTION: Price is without saw blade! (saw blade price EUR 204) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hello here we offer you a used semi-automatic metal band saw / band saw from MEBA Type : 230 GA-H Year of manufacture : ca 2007 Good condition, The machine was in a training workshop. The sale of this machine is only made to tradesmen or entrepreneurs. A visit is possible. Technical data are copied from the manufacturer, so without guarantee of 100% accuracy Automatic band saw Metal band saw Meba 230 GA-H with mitre cut. Automatic band saw Meba 230GA-NC Technical data: Manufacturer: Meba -Type:230GA-H -BJ. Approx. 2006-2007 (estimated) -with control (automatic) -with coolant pump -mitre cut possible -weight approx. 400kg -2 speed levels -high current -cutting range 230mm (see photo)

Circular table saw Elmag with sliding table The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Multi-blade saw Paul type K 34 G 2200 Specifications: • Working width (mm): 2200 • Engine power (kW): 22 • Top rollers: with PU rings • Bottom rollers: corded • Saw shaft: included

saw blade diameter: 250 mm cutting diameter: 50 mm revolutions per minute: 27/54 U/min output: 1,5 kw dimensions: 1,4 x 0,75 x 1,3 m weight of the machine ca.: 0,6 kg Used automatic cold circular saw - 3m roller conveyor - man. lenght stop - Blade hole Ø 32 mm - coolant system - 16 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

White brand sawing machine mod. 360 CNC year 2010 revised in 2019

Saw blade, wood saw blade, circular saw blade -Manufacturer: Dress, saw blade HW -Type: Ø 420x4.0/3.2x30 Z96 TFP -Art. No.: 342031 -Speed: n max. 4500 rpm -Number: 4x saw blade available -Price: per piece -Dimensions box: / 430/430/H10 mm / / 430/430/H10 mm -Weight: 3.6 kg/piece

Saw blade, wood saw blade, circular saw blade -Manufacturer:Leuco, saw blade HW-topline -Type: 400x3.8/3.2x30 Z96 -Article No.: 108371-00189882 -Speed: n max. 4800 rpm -Use: non-ferrous profiles/plastics -Dimensions box: 480/460/H15 mm -Weight: 3.2 kg

Weibert WJ-K315-A Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° with motorized height adjustment and swivel of the sawing unit WJ-800100-A Special price: Options: Scoring unit with motor 0.75 kW WJ-800105 Mitre stop 900 mm WJ-400207 Suction pipe with hose WJ-400104 Saw motor 400 V / three-phase / 4.0 kW WJ-800109 Eccentric clamp WJ-500103 Format table L= 2743 mm WJ-800102

Saw blade, wood saw blade, circular saw blade -Manufacturer: EDN, saw blade HW 12 / 1459 -Type: NE3 350x3.2x32Z=108neg -Speed: n max. 5000 rpm -Use: non-ferrous profiles/plastics -Quantity: 2x saw blade available -Price: per piece -Dimensions box: 385/385/H10 mm -Weight: 1,9 kg