136,851 used machines on RESALE, but how to find them? Machine Search
Center height: 225mm, distance between centers: 1000mm, swing over bed/cross slide: 450mm/260mm, spindle bore: 65mm, max. spindle speed: 3000rpm, max. feed rate: 10m/min, tool turret: 4, main motor power: 7.5kW, control: Fanuc 0i Mate TC. Machine dimensions X/Y/Z: approx. 3500mm/1500mm/1700mm, weight: approx. 1550kg, operating hours: approx. 27000h, feed hours: approx. 1329h. Documentation available. An on-site inspection is possible.
Center height: 200mm, distance between centers: 1000mm, swing over bed/cross slide: 400mm/225mm, spindle bore: 62mm, spindle nose: DIN 55027/6, tailstock taper: MK4, max. spindle speed: 4000rpm, main drive power: 10.5kW, operating hours PLC/motor: 1218h/145h. Machine dimensions X/Y/Z: approx. 2100mm/1080mm/1800mm, weight: approx. 1800kg. An on-site inspection is possible.
Distance between centers: 1500mm, swing over bed/cross slide: 620mm/400mm, control: Heidenhain ManualPlus 420. The machine has been in daily single-shift operation since 2008. An on-site inspection is possible.
L & Z lathe WEILER CONDOR B incl. three-axis digital display -CE - Identifier -Machine from educational institution / very well maintained -Tip height 165mm -Circumferential diameter over bed 330mm -Circumferential diameter over face slide 185mm -Turning length 800mm -Spindle speeds 22 - 2800 rpm - Automatic / longitudinal & face feeds -Thread/Metric/Inch etc. -Rod passage 40mm -Tailstock / quill holder MK 3 -Multifix base holder & inserts -Three-jaw end-ender 200mm -Electric lining protection -Spindle protection cover - 2x Emergency / Off -Coolant device -Swarf back wall -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 1200Kg
turning diameter: 1250 mm turning length: 1500 mm swing diameter over bed slide: 850 mm total power requirement: 22 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 3100x2150x1825 m Brand: JMTCL Type: CW61125B Distance between centers: 1.500 mm Centerheight: 625 mm Swing over bed: 1.250 mm ø Swing over support: 850 mm ø Maximum turning diameter : 1.250ø x 1.500 mm ø Spindle boring: 135 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
L & Z Lathe / Bickenbach LE-20-10-S incl. 3-axis digital display -Very well maintained original condition from educational institution -CE - Identifier -Year of construction 2008 -Three axis digital display -Turning diameter 420mm -Circumferential diameter over bed slide 250mm -Turning diameter in the offset 580mm -Turning length 1000mm -Speed range (transmission) 20 - 2000 rpm -Spindle bore 58 mm -Tailstock cone MK 4 / quill travel 130mm -Röhm three-jaw chuck 250mm & interchangeable jaws -Fixed bezel -Multifix base holder & 3x inserts -Coolant device -Foldable protective device for steel holders -Electric lining protection -Foot brake -Swivel machine light -Running tip (Röhm) -Machine feet -Bed stop -Swarf back wall -Emergency / Off -Operating tool Dimensions: LxWxH 2.1x0.8x1.7 meters / Weight 1600Kg
turning diameter: 800 mm turning length: 4000 mm control: cnc total power requirement: kW weight of the machine ca.: 7,3 t dimensions of the machine ca.: 6,6x2,2x2 m Brand: Phoenix Type: FL 8040 CNC IT Year of make: 2001 Distance between centers: 4.000 mm Centre height: 400 mm Swing over bed: 800 mm ø Swing over support: 510 mm ø Swing in the gap: 1.100 mm ø Spindle boring: 250 mm ø Steady rest: 350 mm ø 3-Jaw chuck: 630 mm ø Machine dimensions (lxwxh): 6.500 x 2.200 x 2.000 mm Machine weight: 7.300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
GENERAL Project No.: 905398 Quantity: 1 pcs. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of construction: 2001/2022 State of condition: Refurbished machine Layers approx.: 2-3 layers DESCRIPTION TURN circulation diameter over bed cover 210 mm chuck diameter 170 mm speed main spindle 7500 1/min power main spindle at ED 10-40/100% 25/16 kW torque main spindle at ED 10-40/100% 134/85 Nm Spindle diameter in the front bearing Main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm rapid traverse speed in X/Y/Z main spindle unit 60/-/30 m/min Feed force in X/Y/Z main spindle unit 5000/-/5000 N Direct displacement measuring system main spindle unit X/Z Full clamping cylinder on the main spindle Revolver bottom Number of stations/driven by 12/12 Tool ho ...
Machine weight: 20,000 kg Faceplate diameter 1250 mm Number of supports: 1 pcs Dimensions: height 4250 mm width 5630 mm depth of 3550 mm Extras: copying apparatus, turret head on the vertical support Technical condition at the time of sale: Replacement rotary amplifier on thyristor converter. Not operated since 1994 p. Small repair and adjustment of electrical and mechanical parts. The maximum dimensions of a workpiece Height 1150 mm The diameter of 1400 mm Weight 8000 kg
Offered for sale is a robust universal CNC lathe. Turning length: 3000mm, max. torque: 2240Nm, spindle speed range: 16-2500rpm, feed rate: 0.001-9999.999mm/min, rapid traverse rate: 10000mm/min, feed force: 15kN, tailstock quill force: max. 15kN, control: FANUC 15 TF. Equipped with hydraulic tailstock, drum turret, steady rest (range 72-220mm and 28-120mm), various spare parts, defects: machine bed worn, X-axis bearing arrangement makes noise. Weight: approx. 8500kg, overall dimensions X/Y/Z: approx. 6500mm/2200mm/2000mm. Inspection possible by appointment.
Stencil lathe Manufacturer: Hempel Model: HH 9 Heavy-duty version with oil-hydraulic control Max.: Workpiece length: 900mm Hydraulic sliding supports: 5 pcs.
SU 125/3000 Swing over the bed 1250 mm Circular diameter above the 940 mm Tip distance 3000 mm Diameter of clamping plate 1250 mm Maximum workload of the workpiece 6000 kg Machine weight approx. 10,000 kg Delivery items of the accessories : - facing head 710 - 3-jaw chuck 630 - steady rests
Copy lathe Brand: Röhrsdorfer model: 83 199 Year of construction: 1987 Workpiece length 100 - 460 mm Kantel dimensions: 20 x 60 mm Equipment: Workpiece magazine Turning knives Template-controlled rotary blade knife, 3x
Center height: 120 mm Center width: 450 mm Spindle passage/bore: 23 mm Board width: 100 mm Speeds: (12) 180 - 2240 min-1 Travel upper carriage: 140 mm Tailstock mount: MK 2 Quill stroke: 80 mm Motor power: 2.5 kW Connection: 400 V Dimensions approx.: 1300 x 880 x 1250 mm Weight approx.: 600 kg Equipment: Piercing device Quick release holder System Multifix, size Aa Machine light Coolant device
Spindle nose: A11, turret: VDI60, voltage: 380V, rated current: 153A, fuse protection: 160A, control: Philips B2T, one tool position for boring bars is defective, no driven tools, without chuck, with documentation and maintenance records, the machine was mechanically overhauled in 2010. An on-site inspection is possible, available from mid-December 2026.
A Spinner CNC lathe in need of repair is offered. Control: FANUC Series 31i-A, spindle operating hours: approx. 36824h. The lower turret is locked but incorrectly indicates unlocked status. A broken spring is suspected as the cause. Documentation available. Inspection by appointment possible.
Manufacturer UNIVERSAL LATHE POTISJE EXCELLENT CONDITION, USED ONLY FOR SUPERFINISH AFTER GRINDING Model PA-45 Year Condition used Location Slovenia Price 26.500,00 € Category Lathe Subcategories Stock Number Serial Number Max turning lenght 3000mm Turning over bed 600 mm, Spindle bore 140 mm, Turning in cranking 1.200 mm Face plate 800 mm
Dear customers, currently we offer a used lathe, for processing wood, metal and plastic, of the brand Zimmermann for sale. Here are some technical data of the machine: Turning length: 1,500 mm Tip height above bed: 300 mm Tip height above support: 160 mm Adjustment travel cross support: 1,500 mm Adjustment travel plan support: 260 mm Adjustable travel upper support: 260 mm Main spindle power: 2.2 kW Speed: 375 - 2,700 rpm Dimensions: 2,600 x 900 x 1,200 mm Weight: 650 kg If you have any further questions, please do not hesitate to contact us. to your inquiries.
Lathe Manufacturer: Meusser & Co. - Frankfurt am Main
Lathe Manufacturer: Meusser & Co. Frankfurt am Main
used
2006 ROMI 33×80 Oilfield Hollow-Spindle CNC Lathe Manufacturer: ROMI Model: 33×80 Year: 2006 CNC Control: FANUC 21iT Application: Oilfield / Heavy-Duty Machining Main Specifications Swing over bed: 33” Swing over cross slide: 23” Chuck size: 24” Spindle bore / bar capacity: 10.5” Maximum turning diameter: 23” Maximum turning length: 90” Maximum spindle speed: 750 rpm Main motor: 60 HP Tailstock: Yes CNC control: FANUC 21iT Electrical: 480 V / 75 A FLA Approx. machine weight: 30,000 lbs Included Equipment 2 × chip pans — approx. 5’ × 11’ × 4’ — 1,000 lbs each Chip conveyor — approx. 4’ × 12’ × 6’ — 2,000 lbs Chiller — approx. 2’ × 2’ × 5’ — 1,200 lbs Hydraulic pump — approx. 2’ × 3’ × 5’ — 1,500 lbs Shipping Dimensions Main machine: 17’ × 8’ × 7’ — approx. 30,00 ...
Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional Delivery: ex site, including truck loading Operating instructions are available
Key data: 200 mm, 900 mm, 310 mm
Paulimot PM4000 lathe with measuring system and base cabinet For sale is a Paulimot PM4000 precision lathe including a digital measuring system (3-axis digital display) and matching base cabinet. The machine is ideal for use in workshops, model making, prototype production, training or for demanding hobby users. The integrated measuring system allows work to be carried out precisely and comfortably. Equipment: Paulimot PM4000 Lathe Digital measuring system / digital display Sturdy base cabinet Lead and pull spindle Forward and backward running Various feed and thread settings Ready to use Technical data: Center width: 900 mm Circumferential diameter over bed: 310 mm Spindle bore: 38 mm Clamping range inner jaws: 4-200 mm Clamping range outer jaws: 65-200 mm Motor power: 1.5 kW Power supply: 400 V Condition: The machine is in used and functional condition ...
Speed: 12.5-2000/min, with documentation. An on-site inspection is possible.
Echea A-II-6000 lathe. Distance between centers: 6.000mm. Swing: 820mm. Swing in carriage: 600mm. Swing in gap: 1.140mm. Bed widht: 510mm. Spindle: 82mm. Speeds: 12. (12-850rpm). Motor power: 25cv. Max. weight with 1 steady rest: 7.700Kg. Equipped with chuck and 2 steady rest. Weight: 9.600Kg.
turning diameter: 1040/1900 mm turning length: 2000/3000/1250 mm swing diameter over bed slide: 740 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Make: EST-Ticino type: 520/2000 distance between centers min/max: 2000/3000 mm center height 520 mm Max. turning diameter over bed 1040 mm Max. turning diameter over support 710 mm max. turning diameter/length 1900 x 1250 mm spindle passage 135 mm with 3 jaw chuck with 4-jaw chuck quick change holder in very good and immediately ready condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Total power: 6kW, voltage: 400V, frequency: 50Hz/3-phase. Documentation available. Inspection by appointment possible.
faceplate diameter: 1130 mm swing diameter: 1500 mm turning height: 1100 mm faceplate diameter: mm swing diameter: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: STANKO TYPEL 1512 Build in: 1977 with pneumatick 3-jaw stuck 1130 mm max. turning diameter 1500 mm max. turning height 1100 mm Motor 30 KW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CATEGORY - 5-Axis BRAND - DMG MORI MODEL - NT 5400/1800 SZ DCG WAREHOUSE NO - ONY100000580 YEAR OF MANUFACTURE - 2007 CONTROL UNIT - MSX-701 III AXIS TRAVELS - X1 1,040 MM / X2 267 MM / H ± 255 MM / Z1 1,940 MM / Z2 1,830 MM ROTARY AXIS MOVEMENTS - B ±120° / C 360° MAX. TURNING DIAMETER - 920 MM MAX TURNING DIAMETER - 470 MM MAX TURNING LENGTH - 1.921 MM SPINDLE - 1 SPINDLE SPEED - 2,400 MIN/-1 MIRROR SIZE - 450 MM ROD DIAMETER - 107 MM MAIN SPINDLE SPEED (S1) - 8,000 MIN/-1 HOLDER TYPE - CAPTO C8 SPINDLE - 2 COUNTER MIRROR REVOLUTION - 2,400 MIN/-1 MIRROR SIZE - 450 MM TURRET-2 NUMBER OF HOLDERS - 10 MACHINE WEIGHT - 36.000 KG MACHINE EXTERNAL DIMENSIONS - 4.50 X 6.61 X 3.46 M
Description SHOOTING FRORIEP 40Dv Carousel Lathe. Modernized in 1998, among other things, a driven tool system (C-axis) was installed and the control was modernized to 840 C. Details Serial number 11330051 Year of construction 1980 Control SIEMENS electrical connection 400 V Face plate diameter 3,500 mm Workpiece height 3,000 mm Face plate over corridor 160 mm Total power requirement 71 kW Space requirement approx. 13 x 6 m Reconstruction 1998
Center height [mm] 625 Auction-ID: A1-40982-120
Parallel Lathe SOCOMO type STAR 305 Between points: 700 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 175 mm Spindle diameter: Ø 36 mm Rotation: from 70 to 2000 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Length: 1800 mm Depth: 800 mm Total height: 1200 mm Weight: approx 1 T
General Description Heavy-duty faceplate lathe manufactured by HEYLIGENSTAEDT , Germany. Designed for precision turning, facing and boring of large rings, discs, shafts and other oversized workpieces exceeding the capacity of conventional engine lathes. The machine is equipped with a large faceplate, heavy carriage and has been modernized with a Schneider Electric variable frequency drive. Technical Details Manufacturer: HEYLIGENSTAEDT Model: Not identified Machine type: Heavy-duty faceplate lathe Year: Not confirmed Large faceplate: Approx. 2,500 mm diameter Conventional manual control Mechanical variable-speed drive: P.I.V. Antrieb Werner Reimers K.G., Variant MRHC 23 Gear No.: 29946061 Oil capacity (P.I.V. drive): Approx. 5.5 L Variable frequency drive: Schneider Electric Altivar 630 (ATV630D11N4), 11 kW Original German spindle speed and feed charts Condition Good ...
SCHAUBLIN 125 High precision lathe Diameter over the bed 270 mm Diameter over cross slide 120 mm Height of centers 125 mm Bed length 1000 mm Distance between centers 500 mm Spindle speed 45-3000 rpm Spindle nose Camlock D1-3 " Rapid traverse of the carriage 440 mm/min Longitudinal stroke 90 mm Cross travel 130 mm Vertical power feed 4-260 mm/min Metric threads 0.25-3.5 mm Spindle for collets B32 Tailstock cone MK 2 English pitches 112-6/1″ Special pitches 0.25-8 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension 1500 x 850 x 1300 mm Weight approx. 950 kg
WAHLI Multi 76 multi purpose lathe Mach. No. 227 Wahli Frères S.A. in Bévilard, Switzerland For turning and milling. Spindle head vertical adjustment. Center height 125 mm ( 70-230 mm) Distance between centers 550 mm Spindle speeds 50-3000 rpm. Travels Z/X - 350/100 mm Spindle diameter 16 mm Max. working diameter 100 mm Power: 2-speed 0.5/0.9 kW motor
Control SIEMENS Swing diameter over bed 350 mm Turning diameter 180 mm Distance between centers 500 mm Spindle speed 4000 min-1 Tailstock Multifix Accessories
Inv. Num. : 6598 Type: SK 12 Producer: ZPS Created: 1964, GO 1994 Parameters: Table diameter: 1180 mm Clamping plate speed: 5.3-225 1/min Max. turning diameter: 1350 mm Max. workpiece height: 900 mm Max. workpiece weight: 5000 kg Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg
PROMA SPF-1000PH universal lathe was manufactured in 2019 in the Czech Republic. The machine is designed for precision machining of internal and external cylindrical, conical and end faces, as well as grooving, bar turning, drilling and threading with adjustable thread stroke size. The optimum rotation speed scale and high-quality cast iron construction, allows the use of high-speed steel and carbide-tipped tools. Workpieces with a maximum length of 1000 mm are machined in a fully illuminated workspace using a powerful spindle with 12 speed stages ranging between 25 and 1800 rpm. Among the extensive equipment of the conventional lathe are a SINO SDS6-3V digital readout and a 3-jaw universal chuck. The total weight of the PROMA SPF 1000PH machine is 2635 kg. Technical specifications of the PROMA SPF-1000PH lathe - maximum turning length: 1000 mm - maximum turning diameter (above t ...
Gurutzpe Super BT lathe. Distance between centers: 8.000mm. Swing: 2.000mm. Swing in carriage: 1.680mm. Swing on gap: 2.360mm. Spindle bore: 102mm. Equipped with chuck and steady rest. DRO Fagor. CE protections and european certificate for second hand machines.
Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg
Lathe Manufacturer: Schaerer Model: UN 200 Center distance: 1600mm
Disc lathe Lathe for plates, bowls, rings, wheels, etc. Manufacturer: Hempel Model: ERSP / ER/Sp 4 Workpiece diameter: max. 400 mm Workpiece thickness: max. 80 mm
Lathe Speeds: 40 - 2000 rpm Tension - lead screw Distance between centers 1 m Center height 230 mm Length 2.50 m Width 1.20 m Height 1.60 m Multifix B recording Accessories Machine unchecked
Clamping claw box made of solid steel GR 9 (new) 4 pieces
WEIBERT WJ-1200 Lathe Distance between centers 1200mm Center height 215mm Spindle thread M33 Spindle speeds 500/1000/2000/2800 Motor output power 1.5KW Face plate Hand rest concurrent grain tip 400V and 230V G&WJ-1200 Net price 1639,-€ with VAT 1950,-€ Option: spindle speeds infinitely variable net 790,-€
turning diameter: 800 mm turning length: 3000 mm swing diameter over bed slide: xx mm total power requirement: xx kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Göltebodt quick-change holder 21 x 300107 € 100,-- 3 x 300114 € 100,-- 1 x 300125 € 150,-- 1 x 300105 € 75,--
SPINNER TTC 300- 52 SMMCY CNC Lathe YOM 2012 Twin-opposed-spindle, twin-turret lathe Control FANUC 31iT Swing diameter 400 mm Max. turning dia ~200-250 mm Max. turning length 400 mm Travels: X1 180 mm, X2 110 mm, Z 450 mm, Y +40/-40 mm Rapid traverse: X1 15 m/min, X2 15 m/min, Z 24 m/min, Y 15 m/min With C-axis Main Spindle 1: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Spindle bore 52 mm Spindle speed 0-5000 rpm/ 19 kW Performance Pmax 23,5 kW Torque 150 Nm Spindle nose A6/DIN Sub-Spindle 2: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Can be moved on a slide to take over spindle 1 Spindle speed 0-7000 rpm/ 8 kW Performance Pmax 13,8 kW Torque 189 Nm Spindle nose 100 mm Turret 1: At the top of the ...
maximum number of results exceeded
please refine your search
5.000 € 
