mesh used for sale

Kemutec KEK Centrifugal sifter Stainless centrifugal sifter, ideal for sifting and screening dry powders and other bulk solids, available with either 4mm or 6mm stainless mesh, 3Ph

With the three-head roller saw, plastic-coated films can be sawn from wide roll to customer roll. With the system, film rolls can be sawn on 3" and 6" cardboard or plastic sleeves. The first cutting head is firmly positioned and defined as a master. The other two cutting heads are positioned to the master on the desired cutting width. A maximum of 2 benefits are possible. Sawing operations can be sawn dry, or wet by a wetting device of the saw blade. • Mesh type: Saw Material: Foil • Cutting system: circular saw s600 mm ( 3 saw cuts ) Saw cutting width: 6mm • Space usage: 7m x 4m Dimensions machine: 4.20m x 2m (height closed 2.15m, open 3,50m Sleeve width max.: 2700mm Cut width max.: 2620mm Cutting width min.: 500mm • Rolls max. : 550mm • Rolls min. : 200mm Sleeve diameter: 76mm/152mm

Mesh and intestinal retracting device Wiegand NetMan NE-30 in a very good used and functional condition. Special machine for the production of rolled roasts, salmon, nut or cooked ham. Completely made of stainless steel. Purely pneumatic drive (external compressed air supply 6 to 14 bar required), 70 cycles/minute, chamber length 300 mm. Several shapes of different sizes are available. Machine is rollable. Dimensions B/T/H 180/50/120 cm. Workshop-tested, ready to use. Further on request.

complete stainless steel suitable for thermo-oil heating (= 115 kW) Band length 3,000 mm Track width 400 mm Mesh width ± 10 mm Oil pump Level control Insertion tape Executable mechanical lifting device infinitely variable speed Dirt transport suitable for fire protection %, p/o (L x W x H) : ± 5,200 x 1,700 x 3,100 mm

Injection moulding machine 3-colours (horizontal /vertical/ and 3rd in L-position with protective enclosure) with turntable available now from our warehouse Hannover Make: Arburg Type: 420C 1000-150/150/60 Built in 2003 Control: Selogica Hours: 20092 h +Closing Unit+ Clamping force: 1000 kN / 1000 to. Tie bar ratio: 420 x 420 mm Plate size: 570 x 570 mm Injection Unit 1 (150 unit) Screw size: 15 mm (high-screw) Pvlzwy Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 2 (150 unit Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 3 (60 unit) Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2080 bar extras 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection moulding machine Tool clampi ...

Technical data and further information: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 2,900 mm Number of fields per row of shelves: 01 pcs. á 2,700 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 02x pallet rack stand, used Material color: sendz. galvanized Profile type: P 115 Stand profile feature: 100 x 100 x 2.50 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 2,300 mm high 500 mm deep 04x pallet racking trusses, new Material color: blue Box profile: 110 x 50 mm Agraffe: 5 HK (hook) clear width: 2,700 mm load per pair of trusses 3,000 kg, at the same time. distributed load 02x push-through safety devices, second choice Consisting of: 01x C-profile, second choice Mate ...

FRYER, TS TECHNIEK BV, MODEL: HOF-5000x600 Technical description: Serial number: 200939-00124 Power supply: 400 V, 3 Ph, 50 Hz, 3 kW Mesh widht: 600 mm - (Stainless steel) Dimensions: 5000 x 1800 x 2300 mm With internal heating coil

The machine is already in Poland with us on site. , a drilling rig from the well-known Swedish brand Sandvik. Used for rocks mainly underground but can also work on the surface. This model is An excellent tool for securing high workings and tunnels, ensuring a safe working environment and constant access to the workplace. The universal screwdriver head design allows all common screw types and combinations to be used, with bolt lengths of up to 6 meters (20 feet), depending on the screwdriver head alternative chosen. The telescopic boom allows you to mount several rows of bolts without moving the machine. An optional second boom – screen holder or basket boom – increases productivity and versatility. Additional automatic functions allow the operator to focus on safe, fast and efficient rock reinforcement. The air-conditioned, soundproofed and tilting cab further enhances safety an ...

We offer you a used backscreen for purchase. This is a special item. There are scratches and damage to the goods. Included are: 01x Rear panel, used Material color: sendz. galvanized Total width: approx. 2,200 mm Total height: approx. 900 mm Mesh width: approx. 100 x 40 mm Frame profile: C Profile approx. 30 x 10/25 mm Round tube, approx. 20 mm

Hello I will sell a powerful chipper of the American brand Rotochopper model MC-166 Engine from a reputable company CAT 3406 - 360 HP. The chipper, despite its age and appearance, is fully functional. Its strong advantage is a very simple construction. It does not require complicated service for simple repairs. The same applies to the operation, which is highly intuitive. Drum-knife chipper for very diverse needs: - Wood, whole logs. - Various types of wood waste - tree trunks, stumps -Cuts - Pallets (It has a magnetic roller that captures metal) - blocks, waste - and many others Capacity approx. 90 m3/h depending on material, operator efficiency, type of material and screens. It has a mounted magnetic wheel that will allow you to get rid of metal parts from the material. It is possible to install different sizes of sieves depending on the needs. The wide hopper ...

The scope of delivery includes: 01x Grating, used Material color: hot-dip galvanized Total depth: 990 mm (support rod direction) Total width: 1,195 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.07 kg | Pcs. Internal designation: L Note: Isq02ga - The frame was flanged inwards from all sides. - The gratings can be damaged, scratched, dented, Welding, etc. show. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Course filter,stainless steel,with 1 mm mesh,Ø 2" connections

The scope of delivery includes: 01x Grating, used Material color: hot-dip galvanized Total depth: 995 mm (support rod direction) Total width: 1,190 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.44 kg | Pcs. Internal designation: K Note: - The frame was flanged inwards from all sides. - The gratings can be damaged, scratched, dented, Welding, etc. show. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

NNP Electric grill Stainless frame and stainless mesh belt, belt dimensions 2700mm x 500mm, variable speed, adjustable timer and temp controls, 3Ph

The scope of delivery includes: 30x gratings, used Material color: hot-dip galvanized Total depth: 990 mm (support rod direction) Total width: 1,195 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.07 kg | Pcs. Weight / pallet: approx. 360.00 kg Internal designation: L Note: - The frame was flanged inwards from all sides. - The gratings can be damaged, scratched, dented, Welding, etc. show. - The above price is only valid if a complete range of 30 pcs. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

The scope of delivery includes: 30x gratings, used Material color: hot-dip galvanized Total depth: 995 mm (support rod direction) Total width: 1,190 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.44 kg | Pcs. Weight / pallet: approx. 370.00 kg Internal designation: K Note: - The gratings can be damaged, scratched, dented, Welding, etc. show. - The above price is only valid if a complete range of 30 pcs. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Volume: 3500 L Suction: 3500 m?/h Electrical load: 136 kVA Base frame with integral floor tray according to German water Management Act Sound-insulating enclosure for 78dB(A), painted Water-tight treatment chamber of stainless steel Integrated bottom tank Oil skimmer with integrated oil seperator (bath1) Chain conveyor with cross bars and wire hooks Silhouette plates with part sensors Silhouette plates (stainless steel) for zone partition Vertical process pump Make-up water supply connection 1 Compressed-air supply connection 1 water meter and dirt trap 1 Tank level control Heating element with temprature control Drain pump unit 2 Mesh wire basket filter per bath SIEMENS S7-300 control, SIEMENS KP 700 comfort

King Head Machine – Type: Mini Rex 4000 SK 63 + Rustika 58 – Sharing, working – Weight range from 35- 120 grams -The machine is intended for the production of rolls and products -The doughs entered into the head mesh are pre-portioned, divided, weighted and rounded -By swivelling out the head machine, the dough pieces can be removed manually from the spreading belt – Hourly output head machine depending on dough weight up to max. 4000 pcs/ h – can be driven on castors -Spread belt can be folded up – Condition: Good Year of construction ca: 1999

Control plansifter Rüter 4-part, 1000 mm high, Complete overhaul. Wire mesh 500 my, resopal sieve With product distributor Double bearings completely renewed, product distributor bearings and seals renewed, sieve stacks cleaned Edition with short floor nozzles without control opening

Volume: 3500 L Suction: 3500 m?/h Electrical load: 136 kVA Base frame with integral floor tray according to German water Management Act Sound-insulating enclosure for 78dB(A), painted Water-tight treatment chamber of stainless steel Integrated bottom tank Oil skimmer with integrated oil seperator (bath1) Chain conveyor with cross bars and wire hooks Silhouette plates with part sensors Silhouette plates (stainless steel) for zone partition Vertical process pump Make-up water supply connection 1 Compressed-air supply connection 1 water meter and dirt trap 1 Tank level control Heating element with temprature control Drain pump unit 2 Mesh wire basket filter per bath SIEMENS S7-300 control, SIEMENS KP 700 comfort

Volume: 3500 L Suction: 3500 m?/h Electrical load: 136 kVA Base frame with integral floor tray according to German water Management Act Sound-insulating enclosure for 78dB(A), painted Water-tight treatment chamber of stainless steel Integrated bottom tank Oil skimmer with integrated oil seperator (bath1) Chain conveyor with cross bars and wire hooks Silhouette plates with part sensors Silhouette plates (stainless steel) for zone partition Vertical process pump Make-up water supply connection 1 Compressed-air supply connection 1 water meter and dirt trap 1 Tank level control Heating element with temprature control Drain pump unit 2 Mesh wire basket filter per bath SIEMENS S7-300 control, SIEMENS KP 700 comfort

JenActUV UV Torpedo conveyor Model: UVTCONV500 Serial: 26557-PO1 Stainless, variable speed conveyor with UV disinfection zone, the UV disinfection zone consists of two arrays of UV lamps, the top array is mounted above the wire belt and bottom array of lamps is mounted below the wire facing upwards. This is set up to achieve disinfection on all sides of a product placed on the conveyor, HMI touch screen controls, belt dimensions 3500mm x 500mm, stainless wire mesh belt, with manual, 1Ph

This is a completely new Handheld XRF Gun in full working order ready for use still in factory warranty. It has a great performance comparible to XRF such as Thermo Niton, Olympus Vanta or Bruker Titan or even other ED X-Ray Benchtop Spectrometer like Spectro Midex, Thermo Scientific, Bruker Mistral or Fischerscope. Original price of the system is more than 30.000Euros. It can analyze Precious Metals and Catalytic Converters very fast in 30sec. It is sold because we do not use it as much. SciAps X-505 Precious Metals Analyzer. Part No 910-500066 PM. Ultra lightweight X-ray analyzer featuring tapered, ergonomic design ideal for testing requirements. The X-505 utilizes a miniaturized X-ray tube, Rh anode (50 kV, 200 uA, 5 W) and high resolution, high count rate silicon drift detector (25 mm2 SDD, 140 eV at 5.95 Mn K-alpha line, at 90+% live time, 250k cps) for fast alloy chemistry  ...

U5 Lab Package For Pilot & Development Construction: 305 stainless steel with 316L stainless steel product contact parts. Surface Finish: Product contact surfaces mirror polished (Ra 0.10 micron), non-contact surfaces 150 grit (Ra 1.06 micron); welds cleaned and polished and all material contact welds ground flush and polished. Infeed Opening: 3.25" (83 mm) diameter with grid bars to prevent operator access to the rotating impeller. Infeed Chute: Hand-fed funnel, 6.4" diameter x 5" high (163 mm x 127 mm) with magnetic actuated safety interlock. Spindle Assembly: Sanitary pharmaceutical duty with pre-lubricated, sealed bearings, viton O-ring, two shaft seals, and double varilip seal in a stainless casing. Also suitable for use with vacuum. Impeller Speed: Approximately 1000 - 6500 RPM. Capacities: Varies based on tooling, feed and speed used. Discharge: 6" (152mm) tri-clamp di ...

max. tool diameter: 400 mm : 180 mm operating pressure: 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in  ...

Gebr. Vimek mesh belt oven, 6 m long, 2 baking chambers, with riello gas burner (320 kW), baking temperature 500° C, stainless steel strip, wire thickness 5 mm, external dimensions: 1640 mm wide, 6000 mm long, 2000 mm high

max. tool diameter: 400 mm : 310 mm operating pressure: 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in  ...

The capacity declared by the manufacturer: 250-600 kg / h Adjustable speed range: 500-3800 rpm, Mobile device, Additional equipment included: conical sieves with a mesh of fi = 1mm, fi = 0.7mm and fi = 0.5mm Cleaner rotor seal, rotor shaft on which the chafer is mounted.

Back wall grille for pallet rack , grid mat , kennel, lattice fence, wire mesh, lattice back wall Dates/ Price: 220 x 200cm = 60 € net, 71,40 € gross 220 x 150cm = 50 € net, 59,50 € gross Mascht : approx. 4 x 10 cm Galvanized Second-hand goods Holder piece. 10€ net --AVAILABLE MULTIPLE TIMES------

We offer you here a used Steel staircase for purchase. Included in delivery are: 01x Steel staircase/ machine step, used Total height: approx. 565 mm Total depth: approx. 600 mm Total width: approx. 950 mm Mesh size: approx. 33 x 33 mm Material color: hot-dip galvanized Step abbreviation: approx. 950 x 300 mm Number of steps: 2 pieces Tread height: approx. 280 mm General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Screen machine, Vibrating screen, Linear screening machine used Bulk material screen in multi-deck design Manufacturer: MOGENSEN GmbH SIZER TYPE 2046 3 screen levels mesh size approx. 46 x 46, approx. 38 x 38 and approx. 32 x 32 mm Inlet approx. 2000 x 400 mm Outlet approx. 2000 x 400 and 2000 x 1200 mm 2 vibrators each 4 kW Dimensions approx. 2200 x 2200 x 2200 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal700 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmSpindle taper BT 30Speed range 20 - 15000 rpmTorque (40% DC) 48 NmClamping System ISO 7388-3 - JD30ToolchangertoolchangerType of magazine DiskNumber of tools 25Integrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software packageProduction package band filter ICS 40ba ...

Graham Z3271 Steam tunnel Stainless frame and stainless mesh belt 3000mm x 380mm belt Variable speed With Hydromatik steam generator

4000 Insert grid 128 x 79.5 x 3cm Used goods, very good condition, see pictures. Bearing rod height 30 mm Load-bearing rod thickness 2 mm Mesh size 7 x 3.5 cm Galvanized Negotiation price: € 25,-- net per piece Price from 70 pieces 22,50 net per piece, larger quantities on request! 35 pieces per pallet Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)

Expro BSJJ-600T Tempura machine Serial: L041101C 2011, stainless, designed for coating products with liquid batter, ideal for products such as chicken nuggets, hamburger, schnitzel and more, variable speed, with blower for blowing surplus batter, overall length 4100mm, stainless mesh belt width 600mm, mobile, 3Ph

Washing drum, drum sieve used, Diameter approx. 1000 mm, Drum length approx. 2000 mm Mesh spacing approx. 10 mm Stainless steel Drive approx. 0.75 kW Total dimensions approx. 3700 x 1900 x 2500 mm Can be used, for example, to wash vegetables or beets. Changes and errors in the technical data and information excepted.

Wrightfield Spray glazer Stainless frame, stainless mesh belt, belt width 850mm, variable speed, recirculation pump, mobile, 3Ph

Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...

The scope of delivery includes: 01x wire mat, used Material color: sendzimir galvanized Total width: approx. 4,200 mm Total depth: approx. 1,020 mm Mesh size: approx. 50 x 50 mm Wire thickness: approx. 3.00 mm

Cuccolini Vibratory sieve Serial: AR0506 Stainless mesh 600mm diameter, 200kg hopper mounted on top, twin vibrators, comes with two meshs, 3Ph

• Size of the vacuum plate = 90 x 134cm • Useful printing size= 70 x 100cm ( according manufactures instruction book ) • Outside frame size max: 94.5 x 145cm • The frame which are coming with the machine / aluminum frames, useful printing size= 84 x 132cm • In the attachment the complete instruction book from La Meccanica We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Screen printing machine PANT 70-100 manufacture LA Meccanica Italy year 03/2006 S/N 114 Printing size max: 70 x 100cm Vacuum Plane: Anodized Aluminum with a squeegee guide bar for the printing color counter weight to hold the frame with the screen easily 380V/50T, 0.37kW vacuum motor  ...

Cuccolini Vibratory sieve Serial: AR0506 Stainless mesh 600mm diameter, 200kg hopper mounted on top, twin vibrators, comes with two meshs, 3Ph

Automatic Polyamide Triangular Tea Bag Packaging Machine, including volumetric cup filler. Discontinuous feeding Controlled by step motor. Bag forming method: Triangular seals by two sets ultrasonic sealing units. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | dosing system weighing scale (standard device): 1-5g | accuracy = ?0.2g | packing material: polyamide, PET mesh, non-woven fabric, any material can be sealed by ultrasonic | tea bag dimensions: triangular bag: 50-80mm | flat pouch: W(60-80) x L(40-80)mm | film width: 120mm, 140mm, 160mm | power supply: 220V, 1.2kW | weight 600kg | machine dimension: L1200xW900xH1800mm (subject to the final design). Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock.  ...

Grote 613-90 slicer Serial: 1081458 stainless, variety of slicing applications including bulk slicing, stacking and shingling into portions, ideal for meat, cheese, vegetables, fruits and bread products, up to 90strokes per min, variable slice thickness 0.5mm - 12.7mm, cutting area 330mm x 152mm, with mesh outfeed, 1Ph

Specifications: Passage width: 600 mm Passage height: 250 mm standard Hood length: 1,700 mm Transport length: 2.100 mm Transport chain: link mesh tape with chicane Current type: 230/400 Volt three-phase current N-PE Heating capacity: adjustable from 4 - 18 kW Power: 19 kW Throughput speed: infinitely variable Colour: creamy white-grey

FORMING MACHINE, KOPPENS TYPE: VM 400 HD Technical description: Serial number: VM400 HD-1717 Power supply: 380 V, 3 Ph, 50 Hz, 7,67 kW, 16.57 A Weight: 830 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2000 x 950 x 2350 mm

BATTERING-GLUING AND BREADING MACHINE, STEIN, MESH WIDHT 200MM Technical features: Battering-gluer: Material: Stainless steel Power supply: 380V-440 / 50-60Hz Battering-gluer dimensions: 1200 x 700 x 2000 mm Breader, Stein, model: E8J Serial number: 184 Bandwidht: 200 mm Dimensions: 2400 x 750 x 2000 mm

A(mm)1486 B(mm) 1368 C(mm) 634 D(mm) 360 E(mm) 1269 H(mm) 1711 Rotor diameter(mm) 320 Rotation speed(r/min)438 Sieve mesh(mm) 8 Number of rotor knives (pcs) 3x2 Fixed knives (pcs) 2x2 Motor Power(Kw) 15 Weight(KG) 1485 Extended Backfill + PVC Double Curtain

KOPPENS MACHINEFABRIEK BV FRYER, TYPE BRN 3000/700 Technical features: Machine number: BRN 3000/700-994 Voltage / frequency: 380v, 3 ph, 50hz, 23.09 a, 9.7 kw Weight: 2940 kg Heated by thermal oil Prepared with fire extinguisher system S/s mesh belt, belt width: 700 mm Total dimensions: 6500mm x 1800mm x 2380mm

BREADING MACHINE, KOPPENS TYPE: PR 600 Technical description: Machine number: PR600-972 Power supply: 380-440 V/50-60 Hz Power: 1.7 kW Weight: 300 Kg Stainless steel mesh belt Belt widht: 600 mm Dimensions: 2200 x 800 x 1900 mm