british flag
Resale Logo

mensi used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information service for engines 100-7000 KW all types  August Storm GmbH & Co. KG  http://www.a-storm.de 
banner logo
start page > keywords mensi > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465380 103

ELU KF 187 for sale
Copy Milling Machines


gebr. Coping machine make ELU Model KF 187. No.: 7000 year 1984 Milling length 420 mm Cutting width 240 mm 250 x 250 mm clamping range Cutting height 240 mm Stencil 300 x 650 mm 1 Milling spindle 740 W S ...
used machine
 
gebr. Coping machine make ELU
Model KF 187. No.: 7000 year 1984

Milling length 420 mm
Cutting width 240 mm
250 x 250 mm clamping range
Cutting height 240 mm
Stencil 300 x 650 mm
1 Milling spindle 740 W
Spindle speed 12,000 rpm
Compressed air supply 7 bar
External dimensions:
Length 1000 mm
Width: 1000 mm
Height 1400 mm
Weight approx. 260 kg
With:
Spraying device
Pneum.. Clamping device

1984
Price  
    request
125460813 105

KASTO PBA 1060-1260 U for sale
Bandsaw - Horizontal


cutting diameter: 1060 mmsaw band length: 13365 mmcutting width: 1260 mmmin. cut-off length: 10 mmcutting speed: 16-80 m/mindimensions of saw-band: 13365 x 80 x 1,6 mm: ja : total power requirement: 14,5 kWweight of the ...
used machine
 
cutting diameter: 1060 mm
saw band length: 13365 mm
cutting width: 1260 mm
min. cut-off length: 10 mm
cutting speed: 16-80 m/min
dimensions of saw-band: 13365 x 80 x 1,6 mm
: ja
:
total power requirement: 14,5 kW
weight of the machine ca.: 9,5 t
dimensions of the machine ca.: 2,76x4,24x3,1 m



This ad was created with MODUL MWS - the software solution of LogoTech.
1994
Price  
    request
125465378 103

ELU KF 78 for sale
Copy Milling Machines


gebr. Coping machine make ELU Model KF 78. number: 21461 built 1978 Vertical milling unit: Milling length 290 mm Cutting width 100 mm Milling stroke 120 mm Horizontal milling unit: Milling length 270 mm  ...
used machine
 
gebr. Coping machine make ELU
Model KF 78. number: 21461 built 1978

Vertical milling unit:
Milling length 290 mm
Cutting width 100 mm
Milling stroke 120 mm
Horizontal milling unit:
Milling length 270 mm
Cutting width 70 mm
Milling stroke 120 mm
Profile width max. 150 mm
Profile height max. 150 mm
2 milling spindles per 740 W
Spindle speed 12,000 rpm
Compressed air supply 7 bar
External dimensions:
Length 800 mm
Width 1100 mm
Height 1300 mm
Weight approx. 250 kg
With:
Spraying device
Pneum.. Clamping device


1978
Price  
    request
125460803 102

HARRISON M 450 for sale
Center Lathe


turning diameter over bed: 450 mmturning diameter over slide rest: 280 mmturning length: 1000 mmturning speeds: 40 - 2000 U/mincentre height: 225 mmspindle bore: 67 mmtailstock quill taper MT: 4 MKtotal power requirement ...

 
turning diameter over bed: 450 mm
turning diameter over slide rest: 280 mm
turning length: 1000 mm
turning speeds: 40 - 2000 U/min
centre height: 225 mm
spindle bore: 67 mm
tailstock quill taper MT: 4 MK
total power requirement: 7,5 kW
weight of the machine ca.: 1,7 t
Dimensions (LxWxH): 2,3 x 1,2 x 1,7 m
Center lathe with
- 3-jaw chuck F 315
- Fixed tailstock top
- Multifix holder
- 2-axis digital display
- Fixed Lynette 180 mm
- Coolant system
- rapid traverse



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465290 105

BEHRINGER HBP 263 A/G for sale
MITRE band saw machine


Well received. Cutting capacity at 90 ° or 75° or 60° round/flat respectively 260 or 300 x 260 mm Mitered at 45 ° round/flat 260 / 260 x 260 mm KL. / gr. Section length 10 mm/any Band saw blade dimensions 4640 x  ...
used machine
 
Well received.
Cutting capacity at 90 ° or 75° or 60° round/flat respectively 260 or 300 x 260 mm
Mitered at 45 ° round/flat 260 / 260 x 260 mm
KL. / gr. Section length 10 mm/any
Band saw blade dimensions 4640 x 34 x 1,1 mm
Cutting speed by 'Frequency 'judge' infinitely variable 14-125 m / min.
Saw motor 3 kW
Weight 2000 kg
Material height 800 mm

Accessories:
Control Panel, hydr. Spray cooling device, bundle clamping device, various band saw blades, instruction manual.
1999
Price  
    request
125460805 102

GEMA LZ 185 for sale
Center Lathe


turning diameter over bed: 370 mmturning diameter over slide rest: 230 mmturning length: 700 mmturning speeds: 25 - 2000 U/mincentre height: 185 mmspindle bore: 40 mmtailstock quill taper MT: 3 MKtotal power requirement: ...

 
turning diameter over bed: 370 mm
turning diameter over slide rest: 230 mm
turning length: 700 mm
turning speeds: 25 - 2000 U/min
centre height: 185 mm
spindle bore: 40 mm
tailstock quill taper MT: 3 MK
total power requirement: 3,2 kW
weight of the machine ca.: 1,2 t
Dimensions (LxWxH): 1,85 x 0,8 x 1,5 m
Center lathe with
- 3-jaw chuck F 315
- Fixed tailstock top
- Multifix holder
- 2-axis digital display
- Fixed Lynette 180 mm
- Coolant system
- rapid traverse



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465277 104

MÄGERLE F-7-R-S3 GO 2006 for sale
Surface grinder


Magnetic table dimension: 1200 x 300 mm Table: 750 x 240 mm Grinding length: 700 mm Grinding width: 300 mm Grinding wheel diameter: 300 mm Grinding wheel width: 30 mm Machine weight: 5800 kg Missing coolant ...
used machine
 
Magnetic table dimension: 1200 x 300 mm
Table: 750 x 240 mm
Grinding length: 700 mm
Grinding width: 300 mm
Grinding wheel diameter: 300 mm
Grinding wheel width: 30 mm
Machine weight: 5800 kg
Missing coolant pump
Magnetic force approx. 70%
Accessories:
Extraction hood
1979
Price  
    request
125460807 103

FORMAT UF 250 for sale
Tool Room Milling Machine - Universal


x-travel: 900 mmy-travel: 250 mmz-travel: 450 mmturning speed range - horizontal: 50 - 1700 U/minturning speed range - vertical: 50 - 1700 U/minmilling-head swivable +/-: 90° spindle taper ISO: 40 table surface area:  ...
used machine
 
x-travel: 900 mm
y-travel: 250 mm
z-travel: 450 mm
turning speed range - horizontal: 50 - 1700 U/min
turning speed range - vertical: 50 - 1700 U/min
milling-head swivable +/-: 90°
spindle taper ISO: 40
table surface area: 1250 x 250 mm
total power requirement: 4,2 kW
weight of the machine ca.: 1,5 t
dimensions of the machine ca.: 1,2 x 1,5 x 1,8 m
? hydr. vise
? horizontal milling equipment (without steady) with 3 milling spindles


This ad was created with MODUL MWS - the software solution of LogoTech.
2001
Price  
    request
125452375 107

CAMU for sale
Cutting-To-Length Lines


Band width max. / strip width max.: 1,650 mm Band thickness steel/strip thickness steel: 0.4-2.0 mm Band thickness ALU/strip thickness steel aluminium: 0.4-3, 0 mm Coil weight Max/coil max weight: 20,000 kg Coil insi ...
used machine
 
Band width max. / strip width max.: 1,650 mm
Band thickness steel/strip thickness steel: 0.4-2.0 mm
Band thickness ALU/strip thickness steel aluminium: 0.4-3, 0 mm
Coil weight Max/coil max weight: 20,000 kg
Coil inside diameter/coil inner dia.: 508/610 mm
Coil outer diameter Max/coil out slide. Max: 1800 mm
Setting rollers number/no. of straightening rolls: 17 St. / no.
Version: 4 high
Dimensions/dimension: 30x6m

The system has worked with aluminum / line what working with aluminum.
2002
Price  
    request
125460809 103

KUNZMANN UF6N for sale
Tool Room Milling Machine - Universal


x-travel: 450 mmy-travel: 500 mmz-travel: 200 mmturning speed range - horizontal: 30 - 1280 U/minturning speed range - vertical: 50 - 2150 U/minmilling-head swivable +/-: 90° spindle taper ISO: 30 table surface area:  ...
used machine
 
x-travel: 450 mm
y-travel: 500 mm
z-travel: 200 mm
turning speed range - horizontal: 30 - 1280 U/min
turning speed range - vertical: 50 - 2150 U/min
milling-head swivable +/-: 90°
spindle taper ISO: 30
table surface area: 865 x 265 mm
total power requirement: 3 kW
weight of the machine ca.: 1,44 t
dimensions of the machine ca.: 1,2 x 1,5 x 1,8 m
? hydr. vise
? horizontal milling equipment (without steady) with 3 milling spindles


This ad was created with MODUL MWS - the software solution of LogoTech.
1979
Price  
    request
125452359 106

URPEMAK URPE CC 50 for sale
Casting press


Aluminum injection molding machine URPEMAK URPE CC 50 was built in 2005 in Spain. URPEMAK URPE CC 50 casting machine - characteristic parameters: - closing force: 500 kN - closing distance: 260 mm - ejector force:  ...
used machine
 
Aluminum injection molding machine URPEMAK URPE CC 50 was built in 2005 in Spain.

URPEMAK URPE CC 50 casting machine - characteristic parameters:
- closing force: 500 kN
- closing distance: 260 mm
- ejector force: 62.8 kN
- ejector stroke: 50 mm
- mold height (min-max): 100/325 mm
- dimensions of plates: 500 x 500 mm
- distance between columns: 320 x 290 mm
- column diameter: 60 mm
- injection position: 0-50 mm
- maximum casting force: 50 kN
- Injection piston diameter: 45-50-55 mm
- casting feed: 140 mm
- casting surface: 159-196-238 cm2
- injection mass / volume: 91-140-188 cm3
- injection pressure: 314-254-210 daN / cm2
- piston feed: 150 mm
- engine: 11 kW
- weight: 4900 kg
- dimensions: approx. 407 x 225 x 220 cm
2005
22,475 €  
  PL   request
125460811 102

GEMA LZ 185 for sale
Center Lathe


turning diameter over bed: 370 mmturning diameter over slide rest: 230 mmturning length: 700 mmturning speeds: 25 - 2000 U/mincentre height: 185 mmspindle bore: 40 mmtailstock quill taper MT: 3 MKtotal power requirement: ...

 
turning diameter over bed: 370 mm
turning diameter over slide rest: 230 mm
turning length: 700 mm
turning speeds: 25 - 2000 U/min
centre height: 185 mm
spindle bore: 40 mm
tailstock quill taper MT: 3 MK
total power requirement: 3,2 kW
weight of the machine ca.: 1,2 t
Dimensions (LxWxH): 1,85 x 0,8 x 1,5 m
Center lathe with
- 3-jaw chuck F 315
- Fixed tailstock top
- Multifix holder
- 2-axis digital display
- Fixed Lynette 180 mm
- Coolant system
- rapid traverse



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125452353 106

URPEMAK URPE CFA 220 for sale
Casting press


Casting machine URPEMAK URPE CFA 220 was manufactured in 2005 in Spain. In the price of the machine, an aluminum melt crucible with a capacity of approx. 500 l, visible in the last picture. Injection molding machine U ...
used machine
 
Casting machine URPEMAK URPE CFA 220 was manufactured in 2005 in Spain. In the price of the machine, an aluminum melt crucible with a capacity of approx. 500 l, visible in the last picture.

Injection molding machine URPAKAK URPE CFA 220 - technical parameters:
- closing force: 2250 kN
- closing distance: 440 mm
- ejector force: 120 kN
- ejector stroke: 100 mm
- mold height (min-max): 240/600 mm
- dimensions of the panels: 780 x 780 mm
- distance between columns: 510 x 510 mm
- column diameter: 90 mm
- injection position: 0-90-180 mm
- maximum casting force: 121-250 kN
- Injection piston diameter: 40-50-60-70 mm
- casting feed: 360 mm
- casting surface: 113-714 cm2
- injection mass / volume: 301-471-678-923 cm3
- injection pressure: 315-1990 daN / cm2
- engine: 20 kW
- weight: 13000 kg
- dimensions: approx. 590 x 238 x 275 cm
2005
37,475 €  
  PL   request
125460795 102

DMG MORI CTX beta 1250 TC 4A for sale
CNC Turning- and Milling Center


turning diameter: max. 500 mmturning length: 1.250 mmcontrol: Sinumerik 840 D sl Siemensswing diameter: 500 mmdistance between spindles: 1.450 mmMain spindle:: turning speed range - main spindle: max. 5.000 min/-1power ...
used machine
 
turning diameter: max. 500 mm
turning length: 1.250 mm
control: Sinumerik 840 D sl Siemens
swing diameter: 500 mm
distance between spindles: 1.450 mm
Main spindle::
turning speed range - main spindle: max. 5.000 min/-1
power capacity - main spindel: 25 / 32 kW
max. Torque: 360 / 280 Nm
spindle head: 170h5
spindle bearing diameter: 130 mm
spindle bore: 77 mm
bar material dia.: 67 mm
usable bar diameter: 65 mm
C-Axis: 360 °
chucking diameter: max. 250 mm
tool magazin::
number of toolpositions: 24 pos.
max. tool diameter: 80 mm
max. tool-dia with free toolbox: 120 mm
max. tool weight: 5 kg
max. tool length: 300 mm
Milling Spindle::
Speed Milling Spindle: max. 18.000 min/-1
power capacity - milling spindle: 22 kW
max. Torque: 100 Nm
tool taper: HSK 63 A
B-Axis: +/- 110 °
axis stroke::
x-axis: 1: 450 (-10) mm
z-axis: 1: 1.300 mm
y-axis: 1: +/- 100 mm
Subspindel::
Spindle speed range subspindle: max. 5.000 min/-1
power capacity - Sub spindle: 25 / 32 kW
bar material dia.: max. 65 mm
chucking diameter: max. 250 mm
C-Axis: 360 °
turret::
number of toolpositions: 12 pos.
tool taper: VDI 40 TriFix
Number of driven toolspositions: 12 pos.
Spindle speed - driven tool stations: max. 4.000 min -1
power capacity driven tool-stations: 11,3 / 28 kW
max. Torque: 7 Nm
switching time: 30°: 0,4 sec
axis stroke::
x-axis: 2: 195 mm
z-axis: 2: 1.200 mm
total power requirement: 70 kVA
weight of the machine ca.: 8,0 t
dimensions of the machine ca.: 4,0 x 2,5 x 2,5 m
Documents:
Chip conveyor:
Milling spindle:
Coolantsystem:
high pressure coolant: 20 bar
hydraulic system:
Automatic Tool Changer: 24 pos.
work light:
C-axis: 2x
B-axis:
Y-axis:
hollow chuck unit:
Subspindle:
direkt probing: X1 / Y1 / Z1 / X2
Parts removal:
Signal lamp - 4 colour:
bar feeder interface:
bar feeder: LNS SuperHyd. 6.50-6.68 4,4m
Tailstock function counter spindle:
steady-rest on turret: SMW - SLU2X / 8-101mm
5-Axis CNC - Turning- and Millingcenter
DMG MORI - CTX beta 1250 TC 4A

- Main- Sub- and Millingspindle
- lower turret
- Conrol: Siemens Sinumerik 840 D sl Ergoline / Shopturn 3G
- 5-Axis-Simultaneous-Machining
- Betriebsstunden: Strom-Ein: ca. 7.500h / Spindellauf: ca. 2.000h



This ad was created with MODUL MWS - the software solution of LogoTech.
2013
Price  
    request
125452336 102

EXCEL SL-320 / 600 for sale
CNC Sloping Beds


CNC lathe EXCEL SL-320 / 600 04-02-102 delivery time: immediate number: 04-02-102 manufacturer: EXCEL type: SL - 320 / 600 MACHINE data year: approx. 1996 L x W x H: CA. 4000 x 2000 x 2000 mm weight: approx. 3500 kg  ...
used machine
 
CNC lathe EXCEL SL-320 / 600 04-02-102 delivery time: immediate number: 04-02-102 manufacturer: EXCEL type: SL - 320 / 600

MACHINE data year: approx. 1996 L x W x H: CA. 4000 x 2000 x 2000 mm weight: approx. 3500 kg

Good general condition specifications control: Fanuc 0 - T dimensions: Max turning diameter over bed: approx. Ã? 450 mm maximum swing over carriage: approx. Ã? 270 mm maximum turning length: approx. 600 mm bar passage: approx. Ã? 70 mm turret: number of who kzeugstationen: 12 PCs tool holder: VDI 40 spindle: speed range: approx. 40-4000 RPM spindle nose: A 2 - 8 drive power: approx. 22.0 kW automatic feeds & express ducts: feed range: approx. 1-10000 mm / min rapid traverse: X 10 / 15 m / min Reitst ock: MK 4 Accessories â?¢ 3 - bake - SMW chuck Ã? 250 mm â?¢ central lubrication â?¢ machine light â?¢ coolant system â?¢ machine documentation â?¢ emergency - off â?¢ electrical hand wheel â?¢ RS 232 data interface â?¢ conveyors â?¢ foot switch

Accessories on request price and other specifications on request
1996
Price  
    request
125460797 101

EMCO MC 1200 for sale
Machining Center - Vertical


x-travel: 1.200 mmy-travel: 600 mmz-travel: 600 mmControl: TNC 620 HeidenhainMain spindle:: turning speed range - main spindle: 50 - 10.000 min/-1power capacity - main spindel: 25 kWmax. Torque: 70 Nmtool taper: SK 40 d ...
used machine
 
x-travel: 1.200 mm
y-travel: 600 mm
z-travel: 600 mm
Control: TNC 620 Heidenhain
Main spindle::
turning speed range - main spindle: 50 - 10.000 min/-1
power capacity - main spindel: 25 kW
max. Torque: 70 Nm
tool taper: SK 40
distance spindle nose and table: 120 - 720 mm
work table::
table surface area: 1.400 x 650 mm
number of T-slots: 5
T-slot - width: 18 H8 mm
tool magazin::
number of toolpositions: 30 pos.
tool taper: SK 40
max. tool diameter: 80 mm
max. tool-dia with free toolbox: 125 mm
max. tool length: 280 mm
max. tool weight: 8,0 kg
max. total weight: 100 kg
tool changing time: 1,6 sec
feeds::
rapid traverse: 40 m/min
feed speeds: 20.000 mm/min
Accelaration: 5 m/s²
feed power: 5,8 kN
total power requirement: 35 kVA
weight of the machine ca.: 7,7 t
dimensions of the machine ca.: 5,0 x 4,0 x 3,2 m
Documents:
Chip conveyor:
Coolantsystem:
high pressure coolant: 30 bar
through spindle coolant:
paper band filter:
interface 4. axis:
4. axis: defekt / defect
Automatic Tool Changer:
elektr. hand wheel:
CNC - Machiningcenter Vertical
EMCO - MC 1200

- only ca. 4.900h Spindle-Runtime



This ad was created with MODUL MWS - the software solution of LogoTech.
2011
Price  
    request
125452333 106

URPEMAK URPE CFA 330 for sale
Casting press


Aluminum injection molding machine URPEMAK URPE CFA 330 was produced in 2008 in Spain. The price of the machine is a melting pot of zinc, with a capacity of approx. 400 l, visible in the last photo. URPEMAK URPE CFA  ...
used machine
 
Aluminum injection molding machine URPEMAK URPE CFA 330 was produced in 2008 in Spain. The price of the machine is a melting pot of zinc, with a capacity of approx. 400 l, visible in the last photo.

URPEMAK URPE CFA 330 casting machine - technical data:
- closing force: 3300 kN
- closing distance: 510 mm
- ejector force: 181 kN
- ejector stroke: 120 mm
- mold height (min-max): 300/700 mm
- dimensions of plates: 910 x 910 mm
- distance between columns: 572 x 572 mm
- diameter of the columns: 115 mm
- injection position: 0-80-160 mm
- maximum casting force: 155-350 kN
- Injection piston diameter: 50-60-70-80 mm
- casting feed: 445 mm
- surface of the cast: 170-1089 cm2
- injection volume / volume: 655-943-1294-1677 cm3
- injection pressure: 308-1782 daN / cm2
- engine: 33 kW
- weight: 16000 kg
- injection molder dimensions: 700 x 270 x 290 cm
2008
37,475 €  
  PL   request
125460791 102

GILDEMEISTER CTX 400S2 for sale
CNC Lathe - Inclined Bed Type


turning diameter: 440 mmturning length: 635 mmcontrol: Heidenhain 4290 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHeidenhain 4290 control inclusive TurnPlus3-jaw chuckc-axis ...
used machine
 
turning diameter: 440 mm
turning length: 635 mm
control: Heidenhain 4290
total power requirement: kW
weight of the machine ca.: t
dimensions of the machine ca.: m
Heidenhain 4290 control inclusive TurnPlus
3-jaw chuck
c-axis
driven tools
12 fold turret head
tailstock
chip conveyor

Technische Daten / technical details:
max. Umlauf-? über Bettbahnabdeckung / max. swing ? over bed 570 mm
max. Umlauf-? über Planführungsabdeckung / max. swing-? over sledge 420 mm
Planweg (x) / cross way (x) 220 Mm
Längsweg (z) / longitudinal way (z) 635 mm
Spindelbohrung / spindle hole 79 mm
Drehzahlbereich / spindle speed 25-5000 UpM /rpm
Werkzeugrevolver / turret head 12 fach /holes
Reitstockaufnahme / tail stock taper MK4
Eilgang X / rapid feed X 20 m/min
Eilgang Z / rapid feed Z 24 m/min.
Antriebsleistung Spindel 100%ED / drive capacity spindle 100%ED 21 kW
Gewicht der Maschine ca. / weight 5700 kg
Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
Technical data, accessories and description of the machine are not binding.





This ad was created with MODUL MWS - the software solution of LogoTech.
2001
Price  
    request
125452332 409

MONDINI CVS/ VG.1 for sale
Traysealer


Sealer dimensions: 3700x1000x2150mm, with Conveyor Chains MONDINI C/T-1 and C/T-2, machine was maintained in 2017.
used machine
 
Sealer dimensions: 3700x1000x2150mm, with Conveyor Chains MONDINI C/T-1 and C/T-2, machine was maintained in 2017.
1999
Price  
  DE   request
125460786 104

WMW - BWF SI 8 S for sale
Internal Grinding Machine


internal diameter: 630 mmgrinding depth: 500 mmswing diameter: 800 mmworkpiece turning speeds: 16 - 250 U/mintotal power requirement: 21 kWweight of the machine ca.: 10,7 tdimensions of the machine ca.: 5380 x 2800 x 330 ...

 
internal diameter: 630 mm
grinding depth: 500 mm
swing diameter: 800 mm
workpiece turning speeds: 16 - 250 U/min
total power requirement: 21 kW
weight of the machine ca.: 10,7 t
dimensions of the machine ca.: 5380 x 2800 x 3300 mm
Equipment:
Four-jaw chuck, diameter 630 mm
Dresser
Coolant system with magnetic filter
Separate hydraulic system
Various internal grinding spindles.
Operating manual



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(17)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Casting press URPEMAK URPE CFA 220


Foundry machine URPE URPEMAK CFA 220 produced in 2005 year in Spain. The price of the machine the crucible for melt aluminum, with a capacity of approx. 500 l, visible on the last photo. Injection molding machine for aluminium URPEMAK URPE CFA 220-technical parameters: -clamping force: 2250 kN -Road: 440 mm -the strength of the ejector: 120 kN -ejector stroke: 100 mm -height (min-max): 240/600 mm -dimensions: 780 x 780 mm -distance between columns: 510 x 510 mm -diameter: 90 mm -the position of the injection: 0-90-180 mm -the maximum force-cast: 121-250 kN -piston injection: 40-50-60-70 mm -feed cast: 360 mm -the surface of the casting: 113-714 cm2 the mass/volume of injection: 301-471-678-923 cm3 -injection pressure: 315-1990 daN/cm2 -engine: 20 kW -weight: 13000 kg -dimensions: ok. 590 x 238 x 275 cm

Casting press URPEMAK URPE CFA 330


Injection molding machine for aluminium URPEMAK URPE CFA 330 manufactured in 2008 year in Spain. The price of the machine is the crucible to melt zinc, with a capacity of approx. 400 l, visible on the last photo. Foundry machine URPE URPEMAK CFA 330-technical data: -clamping force: 3300 kN -road closure: 510 mm -the strength of the ejector: 181 kN -ejector stroke: 120 mm -height (min-max): 300/700 mm -dimensions: 910 x 910 mm -distance between columns: 572 x 572 mm -diameter: 115 mm -the position of the injection: 0-80-160 mm -the maximum force-cast: 155-350 kN -piston injection: 50-60-70-80 mm -feed cast: 445 mm -the surface of the casting: 170-1089 cm2 the mass/volume of injection: 655-943-1294-1677 cm3 -injection pressure: 308-1782 daN/cm2 -engine: 33 kW -weight: 16000 kg -machine dimensions: 700 x 270 x 290 cm

Traysealer MONDINI CVS/ VG.1


Sealer dimensions: 3700x1000x2150mm, with Conveyor Chains MONDINI C/T-1 and C/T-2, machine was maintained in 2017.

horizontal boxer press Euromac Digibend 360


EUROMAC punching Digibend 360 capacity 36 tonnes lengh of stroke 250 mm working speed 10/24-6 mm/sec hight bending 200 mm extra high bending 415 mm oil tank capacity 60 lt aprox 3-phases motor 5.5-4 (hp-kw) table 580 x 1170 mm size 680 x 1170 x 1130 mm weight 900 kg year 2000 CE The data are mechanically translated in the english language. Translation errors are possible. No guarantee for printed date and pricing. • Save up to 100 bend in machine memory. • Bend the guaranteed accurate to +/-0.05mm. • Automated for fast, precise production. • Reduce your set up time. • Adjusting the machine bending pressure or working speed. • Monoblock construction. • Maximum flexibility for bending application (up to 10 tooling) Benefits: • With Euromac punching bending machine, you can change over from one type of tooling to another quickly and easily. • Our bending table is machined from one piece tapered roller steel casting that's guaranteed for 5 year. • Our horizontal acting bending machines give you unlimited bending capabilities, without the risk of damaging your expensive press brake tooling. • Euromac punching bending machine are easy to program, easy to operate, and the cost of production is surprisingly low Well in good conditions of use, which ' can be seen connected and running, by appointment. Specification The RAM force-tonnage (KN) 36 (160) Length of stroke 250 mm Table dimension 1200x580mm Overall dimensions (W x D x H) 1250 x 650 x mm-1140 mm Weight 900 kg

Guillotine Shears STROJARNE PIESOK NTC 2000/4


Guillotine STROJARNE PIESOK NTC 2000/4 were produced in 1987. Shears allow cutting of materials with different strength such as steel, aluminium, copper, etc. The materials with a tensile strength of more than 450 MPa cut material thickness must be correspondingly reduced. In the case of less strength than the 450 MPa can cut materials with a greater thickness, which the breakdown does not exceed 8 mm. The thickness of the material to be cut, depending on the strength of: aluminum 200 MPa: 6 mm copper 250 MPa: 5.3 mm nickel 400 MPa: 4.2 mm steel 450 MPa: 4 mm steel 500 MPa: 3.8 mm brass 600 MPa: 3.4 mm steel 700 MPa: 3.2 mm steel 800 MPa: 3 mm Technical parameters of the guillotine NTC 2000/4: -maximum thickness sheet with pt = 450 MPa: 4 mm -maximum cutting length: 2050 mm -cutting angle: 1.33 degree -outreach in the stands: 200 mm -number of jumps continuous operation at idling speed: 60 RPM -the minimum thickness of the metal: 0.4 mm -the minimum width of the webs: 10s mm (s-thickness) -the maximum radius of curvature of the knife: 0, 05s mm (s-thickness) -cut on the rear bumper, the maximum width without brackets: 300s mm (s-thickness) -position the rear bumper: 4-750 mm -installed power: 5 kVA -the power of main motor: 4 kW -engine power bumper: 0.25 kW -overall dimensions of the device (l x w x h): 2600 x 1600 x 1500 mm -Cutter weight: 3400 kg -foot pedal -DTR, a technical-functional

Profile Saw FILL SM-02


Profile length: 7200mm, max. finished part length double mitre 60°: 1750mm, finished part length chop cut: 80-2500mm, working angle: 0-60°, profile height: 20-150mm, frame layer dimensions in frame/ to the saw: 1200/ 1000mm, short/ long shapes: 80-499/ 500mm, max clamping length: 175mm, machine includes automatic stacking, infeed, saw with clamping system, outfeed and unloading.

Surface Grinding Machine BLOHM HFS 512


Grinding length: 800mm, grinding width: 400mm, workpiece height: 300mm, magnetic clamping plate dimensions: 1200x500mm, table adjustment longitudinal/ cross: 1200/ 260mm, table speed: 2-300m/min, length: 4200mm, width: 2000mm, height: 2400mm, weight: 6.3t.

CNC Long Turning Automatics POLYGIM DIAMOND 32 CSB SWISS TYPE


Automatic longitudinal turning Swiss POLYGIM DIAMOND CSB 32 SWISS TYPE was built in 2008. Technical data for CNC lathes POLYGIM DIAMOND CSB 32 SWISS TYPE: CNC Control: MITSUBISHI Working range: -maximum turning diameter: fi 33 mm -maximum turning length: 250 mm -the maximum diameter of drilling: fi 15 mm -the maximum diameter of the thread: M10 Processing of external diameters: -quantity: 5 PCs. -dimension of the CAP: 16 x 16 x 120 mm Treatment of internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Transverse driven tool:-number of tools: 3 PCs. -Sleeve dimension: 13 mm (ER20) -speed: 200-6000 RPM. Tools from the back to the internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Tool driven to face: -number of tools: 3 front, 3 rear -Sleeve dimension: 10 mm (ER16) -speed: 3000 rpm. Main spindle:-spindle bore diameter: fi 36 mm -spindle speed: 200-8000 RPM. -Spindle bore diameter: subspindle steals: fi 36 mm -spindle speed steals: 6000 RPM. -the maximum spindle stroke: 220 mm rapid feeds X, Y, Z: 18 m/min. Engines: -spindle motor: 5.5 kW -spindle motor steals: 1.5 kW -drive motors. X/Y/Z axis: 0.5 kW -Coolant pump motor: 0.55 kW -lubrication: 4 -power supply: 8.67 kW -the spindle axis height: 960 mm Machine dimensions:-overall dimensions: 2550 x 1140 x 1568 mm -weight: 2788 kg Compressed air supply: -Outlook: 10 l/min. -pressure: 5 kg/cm Equipment: -subspindle -lighting of the workspace -cooling system -orientation of przeciwwrzeciona every 5 degrees -sensor cut off part-receiver detail -Guide ring Rod fixed and Rotary -5 pieces of the outer surface of the turning handles -4 desktop holders for turning the inner surface of the -4-position for desktop tools for turning the inner surface of the rear -6-powered tool for working the transverse -3 to-powered tool to work from the front -3 to-powered tool to work from behind -automatic bar feeder: Fedek SUNNY 542 (3.2 m) -chip conveyor

Milling Machine AJAX CLEVELAND MODEL 4


Table dimensions: 1600x342mm, spindle mount: SK 50.

Shredder DOPPSTADT AK-430 PROFI


Motor: MERCEDES BENZ diesel engine OM 501 LA, mallet drum dimensions: 1750x1100mm, rotational speed: 850-1000/min, number of mallets: 36, mallet weight: 14.5kg, max. inlet height: 650mm, outlet conveyor dimensions: 4000x1800mm, conveyor speed: 2.25m/s, ejector height: 3000mm, length: 11630mm, width: 2500mm, height: 3000mm.

Waterjet Machining Center OMAX 2626


X-travel: 737mm, y-travel: 660mm, z-travel: 203mm, table dimensions: 1168x787mm, max. table load: 1.95t/m², speed: 4572mm/min, length: 2946mm, width: 1829mm, height: 2540mm, weight: 2.962t, including accessories, machine is as good as new.

Horizontal boring machine TOS H100 A


X - the table is transversal, 1250 mm Y - spindle turret upright, 1000 mm Z - table longitudinally, 1250 mm W - spindle extension, 900 mm Spindle diameter, 100 mm Morse spindle cone execution 6 Power of the drive of the main motion, 7,5 kW Working surface of the table, 1250x1250 mm Capacity of the table, 3000 kg The speed of rotation of the flatbed, 0.8 ... 800 rpm Overall dimensions of the machine (LxBxH), 6000 x 3700 x 3000 mm Total machine weight 13500 kg

Furnaces Naber 2,2 m3


Selling rarely used Naber furnace. Max. heating temperature 1340 C; Outer dimmensions - 3200(L)x1700(W)x2200(H). Power supply - 120 kW. Furnace is in good condition, just new controler and clamps should be installed.

Boring Mills TOS Varnsdorf W9


Horizontal boring machine W9 TOS Varnsdorf K.102259 Diameter of working spindle mm 90 Depth of working spindle mm 710 Vertical spindle adjustment mm 900 (1120) Spindle speed: number of degrees 21 range min-1 14-400 Spindle speed with removable faceplate number of degrees 18 range min-1 28-1400 Speed of the face plate number of degrees 12 range min-1 14-180 Working feeds: 18 degrees in the mm / rev range 0.016-0.8 18 degrees in the range of mm min-1 12.5-600 Micro-axis mm min-1 5 Rapid traverse mm min-1 2400 Threads: 18 metric with pitch mm 0.25-12 24 Whitworth threads / 1 "120-2 Electric motor kW 7.5 Machine dimensions: length mm 3900 (4750, 5120) width mm 2500 (2600) Height mm 2650 (2875)

Hydraulic Presses PHM 63 PHM 63


Hydraulic presses PHM 63. Characteristic data of the press PHM 63:-force pressing: 63 t -the strength of open: 33 t -stroke: 300 mm -closing speed: 136 mm/s. -Ironing speed: 4.3 mm/s. -opening speed: 122 mm/s. -cylinder bottom przet?ocznik, ejector -the power of przet?oku/discard: 16 t -the strength of return: 10 t -speed of the pumping/discard: 13 mm/s. -the speed of return: 21 mm/s. -the clearance between the tables: 600 mm-dimensions tables: 500 x 500 mm -fixing form/cross-slots for screws: M20 -tank capacity: 150 l/dm3 -measured oil temperature in the tank should not exceed: 45 degrees C -electric motor: 4 kW -maximum pressure: 320 kG/cm2, 32 MPa -low pressure: 25 kG/cm2, 2.5 MPa -supply voltage: 3 x 380/220 V -dimensions (l x w x h): 710 x 1580 x 2200 mm -net weight: 2100 kg

Radial Drilling Machines Z 3050 X 16


Radial drilling machine with 3050 X 16 was built in 1989. This versatile general-purpose machine. It is suitable for drilling, countersinking, reaming, chamfering and thread cutting medium and large items. With the right equipment it is also possible to boring. Technical data drilling machine Z3050 X 16: -the maximum drilling diameter: 50 mm maximum range: 1600 mm -the maximum distance between the axis of the spindle and the column: 1600 mm -the minimum distance between the spindle axis and column: 350 mm -horizontal spindle head on your shoulder: 1250 mm -maximum distance from spindle face to the working surface of the base plate: 1220 mm (1250 mm) -minimum distance from spindle to base plate working surface: 320 mm (350 mm) -vertical stroke in column: 580 mm -arm lifting speed: 0.02 m/sec. -angle of rotation of the arm: 360 degrees -taper in the spindle: Morsea Nr. 5 -spindle speed range: 25-2000 RPM. -number of spindle speeds: 16 PCs. -feed range: 0.04-3.2 mm/Rev. -the amount of feeds: 16 PCs. -extension: 315 mm -depth of feed per rotation of graduated: 122.5 mm -maximum permitted torque on the spindle: 490 Nm -maximum permitted weight spindle: 15680 N -the power of main motor: 4 kW -engine power lifting arm: 1.5 kW -engine power the hydraulic lock: 0.75 kW -Coolant pump motor power: 0.09 kW -overall dimensions (l x w x h): 2500 x 1060 x 2655 mm -weight of the machine: ok. 3500 kg (3900 kg with a column guide)

Eccentric Presses SMERAL LENP 40 A


Eccentric press SMERAL PRESSES OFFERING LENP 40 and was produced by the machine manufacturer SMERAL PRESSES OFFERING. Machine SMERAL PRESSES OFFERING LENP 40 and was built in 1977. Technical parameters of the press SMERAL PRESSES OFFERING LENP 40 and: -maximum pressure: 40 t -outreach: 220 mm -the range of adjustment stroke: 8-90 mm -adjustment range slider: 60 mm -the gap between the slider and a table with a maximum of spring, in the lower turning point on the wykr?conym a: 250 mm -between the walls of the body: 250 mm -lower table: 630 x 430 mm -bore in a slider-diameter/height: 40/75 mm -the maximum number of strokes per minute slider (continuous operation): 67 1/min -the number of possible jumps-the largest number of individual jumping: 60 1/min -the minimum length of the pitch slider: 8 mm -maximum length of the pitch slider: 90 mm -pitch fastening grooves: 280 mm -the dimensions of grooves in the table: 22 x 38 x 16 x 27 mm -the dimensions of grooves in the disc table: 22 x 37 x 16 x 27 mm mounting holes diameter/distance mounting holes: 24/200/580 degrees -draft: 28 degrees -mounting plate thickness: 60 mm -through hole in mounting plate: 200/220 mm -through hole in the interface plate/height weaning: 100/20 mm -main motor power: 3 kW (1420 RPM) -air consumption for one include: 4 l -basic power supply: 3 x 380/220 V 50/60 Hz -dimensions (l x w x h): 1080 x 1530 x 2110 mm -weight of the machine: 2480 kg Eccentric presses equipment SMERAL PRESSES OFFERING LENP 40A: -an intermediate table -foot control -set covers -DTR (technical motor)

Electric discharge drill - a puncher for holes BAOMA BMD 703


With drill-electric boring machine for hole BMD 703 was produced in 2007. The drill is new, unused. Technical data of the machine BMD 703: -the maximum drilling depth: up to 400 mm -diameter of (drilled) hole: fi 0,5-4 mm -working table dimensions: 400 x 320 mm -height, material thickness: 270 mm -burning time (drill) hole with a diameter of 1 mm, depth 100 mm: approx. 3 min. -power supply: 380 V, 50 Hz

Double screw-type extruding machine FANGTAI FT 500-2


Twin-screw FANGTAI FT 500-2 produced in 1998 year. The machine has one screw diameter fi 50 mm and one snail with a diameter of 65 mm. Technical parameters of the machine screw diameter fi 50 mm: -screw diameter: fi 50 mm -L/D ratio of length to diameter of the cochlea: 28:1 -screw speed: 10-120 RPM -foil width: 200-550 mm -film thickness: 0.015-0.04 mm -main engine power: 7.5 kw -heating power: 30 kw -capacity: 50-100 kg/h. -weight: 2.8 t -dimensions (l x w x h): 5600 x 2600 x 1800 mm3 Technical parameters of the machine screw diameter fi 65 mm: -screw diameter: fi 65 mm -L/D ratio of length to diameter of the cochlea: 30:1 -screw speed: 10-120 RPM -foil width: 200-650 mm -film thickness: 0.015-0.04 mm -main engine power: 15 kw -heating power: 30 kw -capacity: 50-100 kg/h. -weight: 3 t -dimensions (l x w x h): 6000 x 1500 x 2500 mm3

Eccentric Presses TOMA LEN 63C


Eccentric press TOM LEN 63 c was produced in 2012. The machine allows to realize punching, cutting and punching. The press can work with different instruments. It is also possible to full automation of the work by arming its tape dispenser. Technical parameters of the presses LEN 63 C: -clamping force: 63 tons -table size: 800 x 630 mm -the surface of the slider: 450 x 280 mm -outreach: 315 mm -the number of jumps in: 65/130 min. -number of jumping manual work: 45/50 min. -adjust the pitch slider: 10-105 mm -the self-alignment capacity of slider: 70 mm -ground clearance table-slider: 335 mm -the ground clearance between columns: 355 mm -quantity: 2 -engine: 730/1440 min. -engine power: 4/7.5 kW -overall dimensions: 1425 x 1790 x 2550 mm -weight of the machine: 5850 kg Advantages of the press TOM LEN 63 C: -die-cast housing: grey cast iron -the possibility of setting the size of the pitch slider -the possibility of repositioning the slider -pneumatic balancing slider -accurate, extended, self-lubricating guiding slider -eccentric shaft fit rolling rod -molded friction clutch: brake, meeting the requirements of the provisions of safety at work

Eccentric Presses SMERAL TRNAVA LEN 40 C


Eccentric press SMERAL PRESSES OFFERING TRNAVA LEN 40 C produced in 1985 year in Czechoslovakia. Press-specific data LEN 40 c: -pressure: 40 tons -table surface: 660 x 530 mm -the surface of the slider: 400 x 250 mm -outreach: 265 mm -the distance between the table and the slider: 295 mm -the size of the adjustment between the table and the slider: 80 mm -the number of jumps the slider with continuous movement: 70 or the 142 ppm -number of jumping individual: 50/min -adjustable pitch slider: 8-95 mm -pneumatic coupling, min. air pressure: 0.4 MPa -motor power: 3/4 kW -overall dimensions (l x w x h): 1585 x 1245 x 2370 mm -weight: 4500 kg

Universal Lathes Up To 800 Mm Diameter PONAR REMO KEPNO TUX 63 B


Lathe PONAR REMO K?PNO TUX 63 B was built in the machine tool Factory PONAR REMO K?PNO in 2006 year. Technical data of lathe TUX 63B: -maximum turning diameter over bed: 630 mm -maximum turning diameter over cross slide: 380 mm -maximum turning length in between centers: 1500 mm -slot in the spindle, the cone metric: 80 mm -spindle: 71.5 mm -the width of the bed: 433 mm -slot in the tailstock sleeve Morse: 5 tailstock sleeve travel mm 180:- tailstock sleeve diameter: 90 mm -spindle speed range: 18-1800 rpm. -the number of spindle speeds: 21 -the number of feeds in the entire range of spindle speeds: 42 -feed range longitudinal: 0.08-3,26 mm/Rev. -the scope of the transverse feed rate: 0.04-1.63 mm/Rev. -the number of metric: 42 -range of metric: 1-88 mm -number of modular threads: 42 -range of modular thread: 1-88 II mm -number of inch threads: 42 -range of inch threads: 1-88 zw/1 " -the number of threads DP: 42 -range of DP threads: 1-88 DP -fast movement of bottom bracket: 4.2 m/min -life on the spindle torque: 980 Nm -maximum torque on the spindle (5 minutes): 1960 Nm jump lead screw: 6 mm -screw the cross slide stroke: 5 mm -the maximum cross section of the CAP the knife: 32 x 20 mm -speed synchronous motor: 750/1500 rpm. -main drive motor power: 3,9/7.2 kW -overall dimensions: 3130 x 1140 x 1285 mm -weight of the machine: 3200 kg

Vertikal Turning Machines (Lathes) ?KD BLANSKO SKJ 50-100


Producer ..... CKD BLANSKO - OS Year manufacture/Year overhaul ..... 1993 / 2006 Control system Siemens ..... Sinumerik 840 D Max. diameter of workpiece ..... 10000 mm Clamping diameter of rotary table ..... 4770 mm Max. workpiece height ..... 4240 mm Max. load of table ..... 100 000 kg Machine weight ..... 121000 kg Machine dimensions l x w x h ..... d 15910 x š 10600 mm retrofit 2006 - Siemens 840D CNC system - C axis: conversion for use with boring and milling tools - new drives - new electricity (switchboard, ...) - new central lubrication - CAPTO clamping milling head: 1.000 U/min chip conveyor

PRESSA PER PRESSOFUSIONE Italpresse


ISOLA CASTING ITALPRESSE BRAND Italpresse The MODEL 300 YEAR 1974 Horizontal press for die casting with charger and Lubricator Datasheet Closing power 350 Ton Max power injection 40 Ton Central extraction power 18 Ton Max height 750 mm moulds Minimum height 250 mm moulds Stroke 130 mm 500 mm stroke central extraction platen 960x960 plans size mm Distance within the columns 580x580 mm motor power 18.5 Kw Printable area max 400 cm2 metal pressure Kg/cm2 845 total weight of 14.8 Tons press overall dimensions 1450x6100x1900 h mm For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

Punching Machines VERNET 341A


Combined Punching/Shearing/Chopper VERNET type 341A Punching capacity Ø 26 x 16 or 32 x 13 mm Chopper capacity (see abacus) Shearing capacity sheet 13 /flat 90 x 18 mm Profiles shear L 110x10 mm - T 120x80x10 mm Voltage 380 V Dimensions (L x W x H) 2000 x 1000 x 240 mm Weight approx. 2 T MACHINE IN OUR STOCK IN FRANCE.

Circular Saws KALTENBACH KKS 400 NA


Circular Saw KALTENBACH tpye KKS 400 NA Year of construction 1997 Blades dimensions Ø 400 mm Working range: round:130 mm - square: 180 mm - flat: 305 x 20 mm Automatic feeding max length 1000 mm

Boring Mills STANKOIMPORT 2L614


Boring machine STANKOIMPORT 2L614 produced in 1978. The machine is equipped with measuring, and has upgraded partly electronic. Technical data of boring STANKOIMPORT 2 l 614: -spindle diameter: 80 mm -table dimensions: 800 x 1000 mm -the maximum workpiece weight: 1000 kg -spindle speed: 20-1600 min -engine power: 4.5/6.7 kW -dimensions of the machine: ok. 4300 x 2200 x 2800 mm -weight: 7000 kg

Guillotine Shears STROJARNE PIESOK NTC 2500/4


Guillotine STROJARNE PIESOK NTC 2500/4 produced in 1986 year in Czechoslovakia. The data characteristic guillotine Strojarne Piesok NTC 4 x 2500: -the minimum thickness of cut metal plate: 0.6 mm-maximum thickness of cut metal plate (Rm = 450 MPa): 4 mm-maximum width of cut metal plate: 2500 mm -cutting angle: 1 ' 33 Grad-cutting angle: adjustable -outreach-stand: 200 mm -adjustment range rear bumper: 4-750 mm-main drive motor power: 4 kW -engine power rear bumper: 0.25 kW -infeed bumpers:-dimensions (l x w x h): 3100 x 1600 x 1500 mm-weight: 3800 kg

Hob milling machines STANKOIMPORT 53A30P


Hobbes STANKOIMPORT 53A30P built in 1993. Technical parameters of the milling STANKOIMPORT 53A30P: -maximum cutting diameter: 320 mm -milling length: 220 mm -Max. module: 6 mm -the maximum tilt angle: +/-60 ° -the maximum cutter diameter: 160 mm -overall dimensions: 2300 x 1300 x 1950 mm -weight: 6000 kg

Transfer Presses ( 2 - 4 Columns) ERFURT PTRZSST 210


Transfer press ERFURT PTRZSST 210 was built in the year 1991 in Germany. The progressive press ERFURT PTRZSST 210/11/280-technical parameters: -maximum pressure: 160 tons -the number of jumps: 20-40 min-1 -the maximum stroke of the upper table: 400 mm -adjustable handles tools: 63 mm -working capacity per stroke: 40 kNm -depth of draw: 125 mm -the strength of the ejector: 50 tons -ejector stroke: 80 mm -adjust the ejector: 63 mm -the range controlled by the ejector: 63 mm -distance between columns: 3500 mm -the distance between the centres of the utility: 280 -number of posts: 10 -overall dimensions: 6.6 x 2 m -weight: 80000 kg

Eccentric Presses FPA PMS 63 CP


Eccentric press FPA PMS 63 CP produced in 1983 by the Warsaw Factory Machines. FPA press parameters PMS 63 CP: -maximum load: 63 tons -size disc table: 800 x 560 mm -outreach, the table height: 280 mm -adjustable pitch slider: 8-110 mm -diving slider: 65, 85, 110 strokes/min. -maximum number of inclusions in the clutch to intermittent traffic: 20 on/min. -the largest distance slider from the table: 315 mm -the diameter of the hole in the table: 250/280 mm -the self-alignment capacity of slider in the direction of the axis: 90 mm -thickness: 90 mm -hole diameter: 140 mm -slider surface dimensions: 350 x 315 mm -the diameter of the hole in the slider: 40 mm -the ground clearance between the walls of the body: 380 mm -the width of the t-slots: 22 mm -air pressure: 4.5 at -the engine speed: 1500 rpm. -engine power: 5.5 kW -dimensions (l x w x h): 1550 x 1400 x 2650 mm-weight: ok. 6200 kg -an intermediate table -foot pedal -DTR-technical-functional

Vertical Milling Machines BRIDGEPORT TNC


General overhaul 2011 Manufacturer: BRIDGEPORT Technical parameters: - Table dimensions: 960 x 340 mm Control system: HAIDEINHAIN TNC 145

Tube Bending Machines TELHOO CNC DW63NC


Pipe Bender TELHOO CNC DW63NC was produced in 2010 year. Complete tooling for bending 15 mm diameter and with different bending radii. The machine is suitable for the spindle (actuator to the introduction and pulling). Characteristic parameters of CNC bending machine TELHOO DW63NC: -diameters of bent tubes: up to 63 mm -the thickness of the wall of bent tubes: up to 4 mm -the maximum bending angle: 190 degrees -bending radius: up to 350 mm -power: 5.5 kW -overall dimensions: 3500 x 750 x 1100 mm -weight: 1500 kg

Radial Drilling Machines WRS 25/08


Radial drilling machine WRS 25 produced in 1992. WRS drills specific data 25/08: -the size of the work surface: 660 x 360 mm -the size of the work surface: 860 x 560 mm -dimensions: 1400 x 700 mm -drilling capacity in steel: 25 mm -drilling in cast iron: 30 mm -spindle speed: 65-2880 RPM -the largest travel: 160 mm -the number of feed motor spindle: 6 -distance between the spindle from the table: 10-500 mm -distance between the spindle from the Base: 780-940 mm -radial drilling range: 315-815 mm -motor power: 3 KW -Cone Morsea: MK3 -dimensions (l x w x h): 1460 x 700 x 2300 mm -weight: 1100 kg

Carousel Turning Machines (Lathes) RAFAMET KCF 200


Carousel lathe RAFAMET NCC 200 built in 1963. The machine is accurate, suitable for heavy duty. Lathe was made full service. The data characteristic of lathe RAFAMET NCC 200: -turning diameter: 2400 mm (extended from 2250 mm) -height rolling: 1250 mm -slide the slider of a vertical: 1000 mm -engine: 45 kw -dimensions of the machine: 6100 x 5000 x 5500 mm -weight: 50 tons The advantages of the lathe: -New bearings -new oil, cleaned filters-new hydraulic lines -listed lead screw nut -calibration -It has DTR: full technical documentation in Polish language -made was full servicing of the machine

Hob milling machines BARBER COLMAN AEDA 27-7


Hobbes BARBER COLMAN AEDA 27-7 produced in 1989. Milling machine to machine the wheel teeth straight and slanted. Technical data routing, BARBER COLMAN AEDA 27-7: -module: 1 mm-max. module: 10 mm -the maximum diameter of the wheel: 360 mm -distance from the catch of centres: 1000 mm -overall dimensions of the machine (w x l x h): 900 x 2600 x 2200 mm -weight: ok. 4.5 tons

Roll Bending Machines STANKOIMPORT IB 2222 V4


Rolling 3-roller for sheet metal STANKOIMPORT IB 2222 V4 16X2000 was built in the Soviet Union in 1984. Trójwalcowa sheet metal rolling mill has a mechanical drive, the yoke of the upper roller is also opened with gears. Technical data winders STANKOIMPORT IB 2222: -width: 2000 mm -rolled sheet thickness in bending: 16 mm -the thickness of rolled sheet at podginaniu: 12 mm -the smallest bending radius: 240 mm -bending speed: 7.7 m/min. -the diameter of the upper cylinder: 270 mm -overall dimensions (l x w x h): 4040 x 2020 x 1745 mm -weight: weight (without Cabinet): 9800 kg -DTR-technical-functional in Polish and Russian Fight for sheet metal bending are intended 2222 IB STANKOIMPORT cold rolled and tapered ring segments of the sheet with a yield T = 250 MPa (25 kG/mm2).

PRESSA PER PRESSOFUSIONE IDRA


PRESSES for DIE CASTING HYDRA Hydra BRAND MODEL OL 220 PRP YEAR 1995 DESCRIPTION Horizontal press for die casting included STP brand charger Datasheet Closing power 2450 KN Max power injection central extraction Power 180 285 KN KN Max height 550 mm minimum height 180 mm moulds molds 500 mm Race racing mobile plan measures Central ejection stroke 100 mm Dimension 765x765 mm Distance plans within the columns 500x500mm Engine power: 22 Kw total weight 10.2 press Ton 1592x5320x2293 h overall dimensions mm for more details and vision of machinery call us at + 39 030 725026 Monday through Friday from 8:30 19:00 13:00 and 14:00 hours at at

Die-Sinking Spark Erosion Machine Tools BAOMA DK 7732


An EDM machine wire BAOMA DK7732 built in 2006 year. The machine has a CNC that allow programming in 4 axes (X, Y, and U, V) which allows you to cut advanced shapes. Technical parameters of EDM BAOMA DK7732 E: -working table range: 320 x 400 mm -maximum cutting height: 500 mm -the maximum taper angle: 60 degrees/100 mm -the diameter of the electrode a: 0.14 – 0.22 mm -maximum capacity: 100 mm/min. -the smallest jump interplolacji: 0.001 mm -luz reversible screws of working table: 0.002 mm -positioning accuracy: 0.03 mm over a length of 500 mm -maximum weight of workpiece: 600 kg -power consumption: 2 KVA -external dimensions: 1340 x 1870 x 1670 mm -machine weight: 1800 kg -power supply: 3 x 380V 50 HZ

TEKNA TK419/4


3-axis CNC vertical machining center featured with a clamping system made up of vacuum tables that allow panels and plates to be held by vacuum; this solution is useful to obtain an extremely efficient machining of thin components that could hardly be fixed by means of a traditional clamping system. The machining center is equipped with a series of valves that turn on/off different areas of the machining table, thus concentrating the suction on one area and optimizing the clamping of components with limited dimensions. It is designed for drilling and interpolated milling operations on composite panels, panels and plates in aluminum and steel. To create programs that control the machines, Tekna provides user-friendly software tools that can be used both by professional CNC programmers, who can implement the most complex solutions, and by completely inexperienced users; after a few training hours the customer will be able to operate the machining center using a graphical programming. Software solutions offered by Tekna result from an accurate design and from the actual customer needs analysis. The simplicity of usage of these solutions reduces the management time and costs.

Die-Sinking Spark Erosion Machine Tools AGIE AGIETRON INTEGRAL 2


An EDM machine AGIE AGIETRON INTEGRAL 2 built in 1995. Technical data EDM AGIE AGIETRON INTEGRAL 2: -table size: 640 x 450 mm -table travel Yxxxz: 350 x 250 x 350 mm -maximum weight of workpiece: 400 kg -dimensions (w x d x h): 2.16 x 2.25 x 2.7 m -machine weight: 2550 kg -cooling housing -technical documentation

Elumatec DG104, E555


Double mitre saw DG 104 Description The optimal double mitre saw for series production as well as for special applications The universal pivoting and tilting of both saw units allows cutting of high and wide profiles as well as every type of compound mitre. Consequently, many profiles can be cut without support blocks External-dimension cuts possible for all cutting variants. Consequently, no complicated length calculations are necessary. This is a big advantage when cutting special angles Pivoting range with digital angle display Safety hoods Equipped with saw blades as standard Equipped with digital display E 111 as standard Pulsed coolant system Technical specifications Minimum cutting length at 90° 350 mm Minimum cutting length tilted at 45° 350 mm Pivoting range inwards 90° - 45° (up to 22.5° manual with digital display) Tilting range inwards pneumatically 90° - 45° For cutting range, see cutting diagram Saw blade diameter 420 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 4 kW Compressed air supply 7 bar Air consumption per working cycle 40 l without spraying, 64 l with spraying Cutting length 6,000 mm Options DG 104 M machine bed made of steel sheet (cutting length 4,500 mm, 6,000 mm) Software for E 555: Software module for chop and oversize length cuts MACHINE IS WELL MAINTAINED AND WORKING WITHOUT ANY PROBLEM. PERFECT CONDITION. MACHINE HAS INCLUDED E555 INDUSTRIAL PC.

Hob milling machines LAMBERT 751


Hobbes gear Lambert 751. Technical parameters of the milling Lambert 751: -module: 1,5/2 mm -the minimum cutting diameter: 2 mm -maximum cutting diameter: 88 mm -speed of the cutter worm: 270-1440 Rpm feed range: 0.075-0.8 mm/min -length of milling (teeth, straight-screw): 25-50 mm -number of teeth: 4-390 -total power: 1.5 kW -machine weight: 400 kg -dimensions (l x w x h): 1.7 x 1.2 x 0.8 m

Guillotine Shears PIESOK NTC 2000/4


Guillotine PIESOK NTC 2000/4 after overhaul in 2005. The machine is equipped with electronic counter knife strokes. For the price we offer a spare set of knives. The data characteristic guillotine PIESOK NTC 2000x4 mm: -cutting length: 2000 mm -cutting thickness: 4 mm -engine power: 4 kW -dimensions (l x w x h): 2760 x 1650 x 1520 mm -weight: 3400 kg

Hob milling machines POREBA ZFA 75


POREBA enveloping machine ZFA 75 was produced in 1967 by Mechanical Factory "MUNICH". The machine is designed for the production of gears with straight, oblique teeth and worm gears. During operation without a steady handle, it allows for machining wheels with a maximum diameter of 800 mm, and when working with a steady support, the maximum diameter of the wheel is 450 mm. Technical date: The largest cut-out module: -normally: 6 mm -with reduced accuracy: 8 mm The largest diameter of the gear being machined: -with the support fixed: 450 mm -without a steady: 800 mm The largest diameter of a toothed wheel work with helical teeth: -at a helix angle of 30 °: 500 mm -at a helix angle of 60 °: 190 mm The largest milling length for straight teeth: 275 mm Range of distances between the workpiece the axes and the milling cutter: -the smallest 30 mm -the largest 500 mm Vertical milling cutter: 310 mm The smallest distance from the table surface to the milling cutter axis: 200 mm The largest diameter of the milling cutter: 120 mm Diameter of mandrels for setting the cutters: 22, 27, 32 mm Diameter of the hole on the table: 80 mm The number of spindles of the milling spindle: 7 Range of rotation of the milling spindle: 47.5-192 Vertical cutter range for 1 turn of the workpiece: 0.5-3 mm The range of radial feeds of the milling cutter for 1 turn of the workpiece: 0.1-1 mm The range of axial feeds of the milling cutter for 1 turn of the workpiece: 0.25-1 mm Main engine power: 2.8 kW Machine dimensions: 2395 x 1210 x 1975 mm Milling weight: 3800 kg Equipment: -a set of shift wheels for the guitar -change tires/wheels for the second guitar: 7 pcs. -spindles: 5 items -conical wheels: 2 pcs -claw coupling -tests: 5 items -hook key -DTR-technical and operational documentation It is possible to buy additional equipment of the machine, i.e.: -modular cutters with various modules, from 1-8:100 pieces (additional fee, price: $9990 net, visible in the last two photos)

Universal Milling Machines LAGUN FU 1600


Universal milling machine LAGUN FU 1600 was produced in 1990 year. Milling machine-specific data LAGOONS FU 1600: -table dimensions: 1600 x 340 mm -the scope of the work the longitudinal: 1150 mm -operating range: 330 mm -operating range vertical: 465 mm -speed range: 28/1400 RPM. -vertical feed: 12/800 mm/min. -feed: 6/240 mm/min. -tilting table: up to 45 degrees -Tools: ISO 50 -accelerators feeds

AUTOMATIC SHEETS STORAGE SYSTEM MATTER SRL MAT 00.6


Qty. 1 Second-hand automatic sheets (pallets) storage system Mfc.: MATTER S.R.L Built: 2002 Model: Mat 00.6 Number of Automatic Retrieval Cars: 2 Number of drawers: 756 Pallets Dimension of Pallets: Width: 1000/1500 mm / Length: 2000/4000 mm / Height: 250 mm Max. Pallet Weight: Max: 3000 kg Maximum speed of Retrieval Cars: Y Axis: 11 m/min . / X Axis: 58 m/min. / Z Axis: 20 m/min. System is working with Picking Station for separating and handling of pallets Dimensions of the system: Length: 74 meters x Width: 9.40 Meters (not including the picking station) X Height: 9.6 meters ( 9 rows )

PRESSA PER PRESSOFUSIONE IDRA


HYDRO PRESS FOR DIE CASTING Hydro BRAND MODEL OL 220 PRP YEAR 1995 Horizontal press for die casting included STP brand charger Datasheet Closing power 2450 KN Max power injection 285 KN Central extraction power 180 KN 550 mm mould height 180 mm mould height Racing measurements Stroke 500 mm Cabinet plan Central ejection stroke 100 mm 765x765 plans size mm Distance within the columns 500x500mm Engine power: 22 Kw Total weight of 10.2 Ton press Overall dimensions 1592x5320x2293 h mm

ISOLA PRESSOFUSIONE ITALPRESSE


ISOLA CASTING ITALPRESSE BRAND Italpresse MODELL OAL300 YEAR 1974 Horizontal press for die casting with charger and Lubricator Datasheet Closing power 350 Ton Max power injection 40 Ton Central extraction power 18 Ton Max height 750 mm moulds Minimum height 250 mm moulds Stroke 130 mm 500 mm stroke central extraction platen 960x960 plans size mm Distance within the columns 580x580 mm motor power 18.5 Kw Printable area max 400 cm2 metal pressure Kg/cm2 845 total weight of 14.8 Tons press overall dimensions 1450x6100x1900 h mm

Two-crank press of single action Voronezh KB3534A (250ton)


Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100
Get the latest machine offers by email: order newsletter