We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,835 used machines on RESALE, but how to find them? Machine Search
used
OEC Medical System Compact 7600 with: Tube Nagel & Goller EP-F-190 0.6/1.5 Image amplifier 23 cm LIH (Last Image Hold) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians ...
used
St. Jude Medical Kidney Ablation, EnligHTN, RF ABLATION Generator ENL-GEN2 You will receive a VAT invoice.
new
Dr. Junghans Medical hot water bottles 7,300 pieces, each with a volume of 0.6 litres, with or without cover - new in original packaging - are offered as follows: 1) 1,600 hot water bottles 0.6 litres, without cover, REF 10128, LOT 43946 2) 2,900 hot water bottles 0.6 litres, with cover red, REF 12128, LOT 43946 3) 2,800 hot water bottles 0.6 litres, with cover blue, REF 13128, LOT 43946 The hot water bottles come from an overstock at our customer. Single item sales from 1000 pieces would be possible by arrangement. The hot water bottles are still in our customer's factory near Leipzig (Saxony). The sale is carried out ex works EXW (loading possibility available). If the shipping costs are covered, shipping would also be conceivable. We sell the assets on behalf of our customers. The offer prices are to be understood as gross prices in EURO ex works. The offers are s ...
used
Galaxy R Gamma Camera
used
PV210 SDI Medical Video Endoscope Image Processing Processor Use This system is designed to process signals from an endoscope and into a signal that can be displayed on the monitor. Current Power requirement 100-240 V~ 50/60 Hz 1.0-0.5 A Electric shock protection Class I external power supplies Devices. Environment Temperature 10-35 °C (50-95 °F) Relative humidity 30-85 % Atmospheric pressure 800-1060 hPa Altitude ≤2000 m Storage and transport Temperature -20-70 °C (-4-158 °F) Relative humidity 10-90 % Dimensions Length 311 mm Width 188 mm Height 65 mm Weight 2.3 kg Video Output DVI 800×600, 1024x768, 1280x1024, 1920×1080, VGA 800×600, 1024x768, 1280x1024, 1920×1080 SDI 1280×720P60,1920×1080I50,1920×1080I60, 1920×1080P30,1920×1080P50,1920×1080P60VIDEO NTSC, PAL Maintenance USB Type A Year of construction: 2016 Condition: Used ...
used
PV210 SDI Medical Video Endoscope Image Processing Processor Use This system is designed to process signals from an endoscope and into a signal that can be displayed on the monitor. Current Power requirement 100-240 V~ 50/60 Hz 1.0-0.5 A Electric shock protection Class I external power supplies Devices. Environment Temperature 10-35 °C (50-95 °F) Relative humidity 30-85 % Atmospheric pressure 800-1060 hPa Altitude ≤2000 m Storage and transport Temperature -20-70 °C (-4-158 °F) Relative humidity 10-90 % Dimensions Length 311 mm Width 188 mm Height 65 mm Weight 2.3 kg Video Output DVI 800×600, 1024x768, 1280x1024, 1920×1080, VGA 800×600, 1024x768, 1280x1024, 1920×1080 SDI 1280×720P60,1920×1080I50,1920×1080I60, 1920×1080P30,1920×1080P50,1920×1080P60VIDEO NTSC, PAL Maintenance USB Type A Year of construction: 2019 Condition: Used ...
used
Blanco stainless steel cars / Aesculap, trolley, trolley for stainless steel mesh baskets, 2 x Blanco m. baskets: 3 rows of à 6 x trays/segments: 310x540x320mm or 3 trays / segments of â 310x320mm made Edelstahl1x Aesculap: shelf trolleys o., 3 x 6 trays / baskets segments: 295x595x155mm, made of stainless steel
used
Machine has been retrofitted for the personal protection of own fixture construction, with new German CE conformity. Capacity 2500 - 3000 pieces / hour There are still spare parts available. Furthermore, 3to fleece and 1.5 tons of wire and 700kg of strip are available for each type of fleece.
used
german / English High-precision laser welding system fully automatic Laser 1 according to DIN EN 60825-1 Fully functional Well suited for medical technology, optics, precision precision engineering Granite bed Axes: X-920mm / Y-100mm /Z-100mm C-rotation axis - Föhrenbach precision rotary table B-Schenkachse IPG YLR-Series Laser 150Watt pulsed fiber laser 1070 nm Pilot laser red 633nm Camera Automatic door Drawer for vertical workpiece pick-up Control Fanuc 0i-MD Connection for extraction and shielding gas Dimensions: LxWxH 2400 x 1450 x 2200 mm Weight 2000 kg Connection 3 x 400 C / 32 A English: high precision laser welding machine fully automatic Laser 1 according to DIN EN 60825-1 Fully functional Well suited for medical technology, optics, precision engineering Granite bed Axes: X-920mm / Y-100mm /Z-100mm C-rotary ...
used
We sell here a Zwick Roell tensile and compression testing machine Zwick Roell Z2.5 BTC-FR2.5TN D09 with Testcontrol I and TestXpert software. The machine is in a tagless condition and fully functional! PC and monitor included! More photos will follow! Test force: 2.5kN Test chamber width: no limitation Height of lower test chamber: 365 ... 1040mm Scope The ZwickRoell zwickiLine material testing machine Z2.5 TN+ is a high-performance, flexible inspection solution for a variety of demanding test tasks. The Material testing machine is ideal for high-precision testing requirements as well as for the Research and development. For testing tasks under cleanroom conditions, the zwickiLine Z2.5 TN+ is also ideally suited. They in production and testing areas, the cleanroom Class 5. Due to the special technical properties, the zwickiLine Z2.5 TN+ for testing metals, Spring ...
used
Description: JIANGXI OK SCIENCE AND TECHNOLOGY CO. PBKZ mask making machine Chemical and Pharmaceutical Industry Machine for making community and medical masks. Medical masks : Type I, Type II & Type IIR.  , Manufacturer JIANGXI OK SCIENCE AND TECHNOLOGY CO. Model PBKZ mask making machine Purchase date end of April 2020 Masks per minute 80 pieces via 2 ejection belts Extras Folding and ironing unit for inner ear straps / Stacking unit on the ejector belts Further information Ultrasonic welding units partly renewed Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
new
The laser device series NBL, consistently adaptable to your needs, allows you this economic and durable engraving of single pieces and small series, directly from the computer. Ideally suited for medical instruments, devices and transplants. No consumables. In a special process you can even mark glass - instant - durable. So, you can mark on your products easy and flexible variable data, for example a 2D barcode, or QR code in the highest quality. Also plastics are possible, like E.g. an attractive customer card, with photo or graphics, in brilliant quality. Laser marking is resistant to abrasion, penetrates deep into the material and thereby effectively resists tampering attempts and adverse effects due to environmental influences, to a large extent. Only a standard PC (not included) is required for the Operation where the software supplied is running to operate the laser. ...
Ladies and gentlemen, below the offer for a used 200 beds hospital The entire technology can be checked before handover. Prices: on request We are also happy to offer you other new and used medical devices. We would be pleased to have your request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buye ...
used
Fully automatic forming and erecting of NeoTOP partitioned carton fluted trays, NeoTOP open- top trays or NeoTOP cartons including integrated partition from flat blanks; cylindrical objects, applicators, tubes, medical devices or blisters are then laid in. The partitioned cartons, trays and packs are formed fully automatically from two supplied flat blanks. The partitions are formed and glued into the erected pack or onto the carrier blank. The products are then laid in by an automatic integrated inserter. An automatic product presence checker and leaflet inserter, barcode reading systems and a hot-melt unit for tamper-evident packaging complete the machine system. Output: up to 90 cartons / min. Inkl. sep. electr. panel.
used
USED PUMP FOR SALE Liquid ring vacuum pumps with magnetic coupling SIHI liquid ring vacuum pumps with magnetic coupling are displacement pumps of simple and robust design meeting high demands on tightness. Two liquid surrounded sleeve bearings of tungsten and silicon carbide (WC / SiC) bear the shaft axially and radial. The application of high-grade magnetic materials with high density of energy guarantees the transmission of the nominal torque and safety during the start-up phase and in case of overload. Liquid Ring Vacuum Pump Application Field: • Power industry • Coal industry • Paper industry: • Food and beverage • Plastic machinery • Mining metallurgy • Tobacco industry • Petrochemical industry. • Textile industry. • Wood processing industry • Medical industry • Oil field production • Sugar industry • Aviation test
used
Krebser Kehrli urological xray system UX 96 L with the following device components: generator Stadler SE 3000 tube Comet DI 86 HS-33/100-150 0.6/1.3 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient ...
used
GE UroView 2800 (urological x ray and fluoroscopy) with the following device components: Generator Jedi 00-883988 -01 _ 65 kW Tube Varian A-286 0.3/1.2 Image amplifier _ 00-884063-01 32.5 cm OEC workstation ESP Cine (trolley with double monitor) Sony Video Graphic Printer UP-960 CE Review-/double monitor (flat screen) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do ...
used
Siemens Panorama dental x ray Orthophos with the following device components: generator D 3200 tube SR 90/15 FN 0.6 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.
used
Picker SureView M2 with: Tube M-147 0.1/0.3 Bucky 18x24 and 24x30 Without radiation protection wall complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into ...
used
Siemens small X-ray/intraoral x ray system Heliodent MD (tube SR 60/70/7 0.7) • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.
used
Siemens combined fluoroscopy and X-ray system Sireskop SX with the following device components: generator Polydoros SX 65/80 tube OPTITOP 150/40/80 HC 0.6/1.0 digital image processing Fluorospot TOP Image intensifier 40 cm PACS integration DLR 2nd Workplace 3D3 ceiling tripod 2nd tube OPTITOP 150/40/80 HC 0.6/1.0 vertical stand Vertix complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless oth ...
used
Siemens combined X-ray and fluoroscopy system Sireskop SX with the following device components: generator Polydoros SX 65 tube Opti 150/40/73 C 0.6/1.0 digital image processing Fluorospot H Image intensifier 33 cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the bu ...
used
Siemens X-ray and fluoroscopy system/ angiography Polystar TOP with the following device components: generator Polydoros SX 65/80 tube Megalix 125/40/82 CM 0.6/1.0 Digital image processing Fluorospot TOP Image intensifier Sirecon 40-4 HDR 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is ...
used
Carestream Direktview CR 950 with: 2x Control panel 25 cassettes: 18x24-8 pcs. 24x30-5 pcs. 35x43-12 pcs. complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before plac ...
used
Dornier Opus with the following device components: generator Hofmann Selector D tube Comet DI 97 HS-33/81-150 0.6/1.2 Image amplifier 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qu ...
used
AGFA ADC Compact with: Readout unit/ID tablet Workstation complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.
used
Fischer Imaging Mammotest Plus S with: Mammotome SCM 23 (biopsy) Tube Varian M-147 SP 0.1/0.3 complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patien ...
used
– Thermoforming and Sealing Machine – GEA POWERPACK NT 76750101 – Year 2014 The GEA PowerPak thermoforming machine is specially adapted to different applications (vacuum, MAP, shrink, topform, skin, zipper, medical and technical packaging). Conversion to other packaging is easy and format changeover is quick and takes place in a few simple steps. To adapt this equipment to your needs, the Powerpak Thermoformer-Sealer can easily be completed with various integrated upstream and downstream components. A powerful conveyor chain securely grips the lower web of the feed drum. A precision servo motor indexes the web throughout the machine process. The length of the index is programmable on the HMI and stored as a recipe parameter. The loading area is accessible from both sides for several operators. Powerful GEA membrane sealing system for reliable seals and constant pe ...
used
STRATASYS OBJET30 PRIME V3 3D PRINTING (year 2015) 3D printing of medical implements that require prolonged contact with the skin, such as headsets or surgical guides. Prototypes of joints, connections and sealants. The Objet30 Prime printer offers 12 different materials so you can create accurate prototypes of consumer products with smooth surfaces and flexible components from your desktop. Printing time: 1102 Specifications: layer thickness 28 microns for Tango materials; 16 microns for all other materials Precision 0.1 mm could vary depending on part geometry, size, orientation, material, and post-processing method model materials Biocompatible (MED610) Material for high temperature (RGD525) Rigid and opaque white material (VeroWhitePlus) Rigid and opaque blue material (VeroBlue) Rigid and opaque black material (VeroBlack) Rigid and opaque gray material (VeroGray) ...
used
V10 - used approx. 32 m³ / 32,000 litres stainless V4A steel tank, transportation tank, insulated, with 3 internal walls, on a steel frame. technical details: capacity: approx. 32 m³ / 32,000 litres material: stainless V4A steel tank, Inox, AISI 316L: WNr. 1.4404 (X2CrNiMo17-12-2), (V4A, A4L) Austenitic, stainless steel, L stands for low carbon content. use: for mechanical components with increased corrosion resistance requirements, especially in chloride-containing media and for hydrogen. AISI 316L is used in a wide range of fields, in the pharmaceutical industry (manufacture of cleaning, disinfection and drying machines), in medical and dental technology, as well as in swimming pool construction. weight: approx. 4 t without frame test pressure: 4 bar dimensions: approx. 2.00 m x 9.00 m; total height incl. frame approx. 2.70 m Other: Used tank in good condition, ...
new
Compact 50l compressor with two very powerful, silent direct drive motors. Designed for workshops, dental offices and other places where regular compressors are too loud. Oil-free design and anti-rust inner coating makes it perfect for medical institutions. Advantages of Aflatek SilentPro50-2 2.2kW: -Two powerful 1100W electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 230 Motor power, W: 2x1100(2200) Motor speed, Rpm: 1440 Air supply, L/min: 420 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 80 Air tank, L: 50 Dimensions(length x width x height), mm: 700x340x600 Weight, kg: 38 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 715x365x650 Weight, kg: 43 Tracking: ...
used
Siemens AXIOM Aristos FX Plus with the following device components: Generator Polydoros LX 30/50 Tube Opti 150/30/50 HC 0.6/1,0_Year of manufacture 2014 (ceiling-hanging) Vertical stand Aristos FX (ceiling-hanging) 1 Detector Trixell Pixium 4600 43x43 cm_Product No. 100204 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the b ...
used
Can be used out of atmosphere treatments, sterilizing medical equipment size 110x110x340
new
Waste separation plant - unpacking plant Food Waste Disposal plant / separation and separation plant for food & industrial waste. The innovative wet-separation plant for the treatment and separation of mixed, packaged and unpackaged waste. This plant is a solution for the settlement of the TA municipal waste of the Waste Disposal Ordinance, which prohibits the disposal/landfilling of untreated, organic, biodegradable municipal waste since 1 June 2005. By processing and separating organic and/or municipal waste, we reduce the pollution and provide a larger volume of high-quality biomass for recycling. If waste has previously been landed untreated, such waste is processed and recycled. The organic components are returned as compost or biomass for the production of renewable energies, which leads to a significant reduction in landfilling and thus the associated methane emission. ...
new
High Power oil-free compressor for workshops, offices, medical institutions and other places where regular compressors of the same size are too loud. Advantages of Aflatek SilentPro200-4: -Four 1100W direct drive electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily movable on 4 rubber wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, W: 4x1100(4400) Motor speed, Rpm: 1440 Air supply, L/min: 960 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 83 Air tank, L: 200 Dimensions(length x width x height), mm: 1500x500x670 Weight, kg: 120 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1580x550x930 Weight, kg: 140 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer ...
used
Packaging machine Dixie Union Packaging Machines modular - Function 1: Deep drawing - Function 2: Sealing - Function 3: Vacuuming - Function 4: Printing - Packaging size max.B/ L/H: 270 x 320 x 100 mm mm - Total power: 15 kW - Machine weight: 1600 kg - Space requirement (W x D x H): 6.8 x 1.0 x 1.8 m - Condition: very good details PA/PE film packaging/paper packaging e.B. for medical devices with cliché print Soft blister, machine was in use until dismantling accessories Flexographic printer (cliché printing) AMACO DV 120, Y.O.M. 1998, documentation
new
High quality oil-free compressor, great for heating systems, workshops, service stations, spray painting and many other applications. Oil-free design and anti-rust inner coating makes it perfect for medical institutions like dental office. Advantages of Aflatek SilentPro100-3 230V: -Three powerful direct drive electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 1Ph 230V Motor power, W: 3x1100(3300) Motor speed, Rpm: 1440 Air supply, L/min: 630 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 82 Air tank, L: 100 Dimensions(length x width x height), mm: 1000x400x670 Weight, kg: 58 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1010x415x710 Weight, kg: 68 ...
used
A screw compressor system Atlas Copco is offered, Used Ready for immediate deployment! 100% oil-free compressed air; Reduced energy costs; Applicable in: Pharmaceutical industry food and beverage industry; electronics industry; Medical and Healthcare If you have any further questions, please do not hesitate to contact us.
used
machine measurements: 6.850 x 3.600 x 1.900 mm machine weight: 5.000 kg power capacity: 9 kW Condition: used - as good as new unit is still completely packed Specification: Medical surgical mask system complete Consisting of: - See sketches in the attachment Summary of the equipment: This machine is mainly used for automatic forming of plane mask: the whole roll of cloth is driven by roller after being unrolled, and the cloth is folded and wrapped automatically. The nose bridge strip is rolled up for traction and unrolled. After cutting with a fixed length, it is imported into the edge cloth. The two sides are welded to the seal by ultrasonic welding. The mask was transported to two mask ear belt welding stations by the assembly line, and the mask was finally formed by ultrasonic welding. After the mask is made, it is transported to the flat belt line through the assembly ...
used
SENFENG FLK 120 automatic mask making machine manufactured in 2020 in China, is used for the fully automatic production of masks consisting of three layers of fabric materials. The masks produced are used in the medical industry, as well as protecting us in everyday life by filtering harmful substances in the air, such as dust and bacteria. The machine producing surgical masks automatically cuts, folds and stitches the fabric used in their production. Ear bands with a diameter of 3 mm, as well as nose strips with a width of 2 to 3 mm are added to the masks. The mask making machine guarantees a high production output, producing 90 to 120 masks per minute with a production quality rate of up to 98-99%. The surgical mask making machine is equipped with a Delta PLC controller featuring a touch screen, making the work on the machine much easier. The total weight of the automatic mask ma ...
new
With very powerful 1100W motor SilentPro10-1 is excellent option for anyone who needs compact and portable compressor that provides considerable air flow rate. Oil-free design and anti-rust inner coating makes it perfect for medical institutions like dental office. Advantages of Aflatek SilentPro10-1: -Compact design. -Much more powerful than other compressors of the same size. -Minimal maintenance needed. -Anti-rust coating. -Air filter. -Low noise and vibrations level. -Oil-free. Technical data: Power supply , V: 230 Motor power, W: 1x1100 Motor speed, Rpm: 1440 Air supply, L/min: 210 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 77 Air tank, L: 10 Dimensions(length x width x height), mm: 500x190x490 Weight, kg: 16 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 530x210x500 Weight, kg: 17 T ...
used
Agilent Monitor M3046A m3 Monitoring Monitor Model M3046A with Bracket+M3001A For sale is a used, well-preserved patient monitor Agilent M3046A m3 STK is still valid until 3/22 + Parameter Patient Module M3001A has usual traces of use and is functional, battery is ok with monitor holder, monitor holder You will receive a VAT invoice. Important: I expressly point out to the buyer that the relevant legal regulations must be complied with in the event of any commissioning of medical devices. Any liability for defects occurring after delivery is excluded. The buyer is responsible for this. In addition, the regulations of the MPG of the MPBV must be complied with and, if prescribed, an STK must be carried out. The buyer must also take care of this.
new
High Power oil-free compressor for workshops, offices, medical institutions and other places where regular compressors of the same size are too loud. Advantages of Aflatek SilentPro300-6: -Six 1100W direct drive electrical motors. -Very large 300l air tank. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Movable on 4 rubber wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, W: 6x1100(6600) Motor speed, Rpm: 1440 Air supply, L/min: 1260 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 85 Air tank, L: 300 Dimensions(length x width x height), mm: 1650x450x850 Weight, kg: 173 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1720x490x920 Weight, kg: 205 Tracking: Available -Price is with VAT 21% included. Contact us if you ...
new
Less powerful version of SilentPro100-3. Instead of 1100W motors, Silent100-3 has three 550W motors which still makes it very powerful for an affordable price. Oil-free design and anti-rust inner coating makes it perfect for medical institutions. Advantages of Aflatek Silent100-3: Three 550W direct drive electrical motors. Anti-rust coating. Air filter on each pump. Low noise and vibrations level. Oil-free. Easily portable on two rubber wheels. Technical data: Power supply , V: 230 Motor power, W: 3x550(1650) Motor speed, Rpm: 1440 Air supply, L/min: 210 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 56 Air tank, L: 100 Dimensions(length x width x height), mm: 1000x400x670 Weight, kg: 58 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1010x415x710 Weight, kg: 66 Tracking: Available ...
new
You will find no hidden costs with us We always present the final amount on sales quotes if the contract is signed within the quote valid period. We always evaluate shipping costs from our warehouse in Poland. Laser welder LWH-2000-N The kit includes: - laser welder with cooling system - welding gun with adjustable focal length and set of accessories - fiber laser source MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz Welding and cutting Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual pla ...
new
Core Components: PLC, Gearbox, Motor Application: Food, Beverage, Commodity, Medical, Chemical, Machine Driven Type: Electric Dimension(LWH): (L)1840(W)900(H)1300mm Punch frequency:10-20 times/min Compressed air required: Air compressor≥0.3m³/min Air pressure: 0.4-0.6Mpa Voltage: 220V Weight: 550 KG Key Selling Points: Easy to Operate Production capacity: 2400 plates/hour
used
Centerless external cylindrical grinding machines Herminghausen SR 40-3 Machine Was improved and rebuilt by the company Ebert. Thus type designation CL 43. Original price 299.000, - €. Operating voltage: 400 volts, power consumption: 22 kW, workpiece diameter 2 - 130 mm, largest grinding length for through grinding 250 mm, grinding wheel diameter min/max 400/600 mm, grinding wheel bore 604.8 mm, control wheel diameter min/max 220/300 mm, control wheel bore 152.4 mm, grinding wheel circumferential speed 40 m/s, control spindle speed infinitely adjustable 0 - 200 rpm, control Siemens S7, cooling lubricant supply unit, weight of the machine ca. 6000 medical history Errors excepted!
new
X-ray detector for food and other (e.g. medical, chemical, textile) products in packaging (non-metallic or metallic, even cans), flexible setting of detector head, suitable for detecting small products and specials applications. With protective device. - Specifications: detecting speed: 0.17-0.46m/sec | detecting accuracy: FE from ? 0.8mm, SUS from ? 0.8mm | tunnel size WxH: 230x120mm | max. passing size WxH: 230x120mm | power: 220V/1kW | dimensions and weight: L1230xW795xH1600mm, 800/900kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
new
Metal Detector for food and other (e.g. medical, chemical, textile) products, also suitable for wet products, stainless steel framework, touch screen, easy integration into existing production line. - Specifications: weight of the product: max. 5kg | detecting speed: 0.5m/sec | detecting accuracy: FE from ? 1.5mm, SUS from ? 2.0mm | tunnel size WxH: 125x250mm | max. passing size WxH: 100x215mm | power: 220V/0.3kW, 50Hz/60Hz | dimensions and weight: L1627xW528xH1420mm, 110/210kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
new
Metal Detector for food and other (e.g. medical, chemical, textile) products, also suitable for wet products, stainless steel framework, touch screen, easy integration into existing production line. - Specifications: weight of the product: max. 50kg | detecting speed: 0.5m/sec | detecting accuracy: FE from ? 1.5mm, SUS from ? 2.5mm | tunnel size WxH: 450x250mm | max. passing size WxH: 410x210mm | power: 220V/0.45kW, 50Hz/60Hz | dimensions and weight: L1800xW800xH950mm, 180/280kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.