medical equipment used for sale

Ato Rotopacker 3-tube with autom. Bag feeder Zipper 50/4000. Capacity 2400 bags per hour. On request with dedusting system and other accessories possible.

Sandblaster GLASNER Working is OK Equipped with one filter Voltage: 380 V Internal dimensions: Width 590 mm x Depth 470 mm x H 400 mm Width: 1000 mm Depth: 1500 mm Total height: 1800 mm Weight: approx 400 kg

Tool trolley for cutting machine, fish slicer GEBA GPS 200 (Röscher) Dimensions LxWxH approx. 120x65x97cm, weight approx. 44kg, only car without accessories, used, good condition

Machine type: MIG/MAG welding machine Make MERKLE Type ME 282 LK N Connection voltage 3 x 400 volts Adjustment range 40 – 280 amps Duty cycle 15% ED at 280 amps 60% ED at 200 amps Current setting 7 switching levels Point and interval setup Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire Feeder 2-Roller Drive Fuse 16 Ampere Dimensions L x W x H 885 x 375 x 590 mm Weight 80 kg Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. long 1 piece ground cable permanently mounted 1 piece pressure reducer 1 roll of welding wire D 300, 5 kg 1 pair of welding gloves with cuff 1 piece spare parts box complete Equipped 1 can of ME 4000 non-stick spray 1 Piece ...

Offer 17500 Spot welding gun Technical data approx.: - Nominal power approx. 100 kVA - Projection approx. 350 mm - Arm spacing approx. 200 mm - Arm diameter approx. 50 mm - Double lifting cylinder type X - Z force at 10 bar approx. 2400 daN - Working stroke approx. 20 mm - Arm spacing approx. 200 mm - Separate control cabinet HARMS + WENDE - Total weight approx. 250 kg

ID3502 OMAG Plant for large-diameter pipes  / Großrohranlage OMAG large pipe system (all hydraulic) including molds, bases, support rings, various accessories and forklift with turning tongs OMAG large-diameter pipe system (all hydraulic) including moulds, lower sleeves, support rings, various accessories and forklift with turning pliers

Offer 24228 Specifications: - Welding current 400 A 60% ED - 320 A 100% ED - Welding current adjustable from 20 A to 400 A - Current consumption 400 V / 46 A - with: - E. - Welding cable - Ground cable -Trunk - Space requirement approx. W 450 x H 750 x D 600 mm - Weight approx. 150 kg

volume capacity: . total power requirement: . kW weight of the machine ca.: . t The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

B&C bagging machine from 2011 in excellent working order. Machine capable of bagging; soil / fertilizer / mulch / pellets / powders / wood chips / granules / fertilizer / salt. Possibility of making bags from 5L to 80L. Maximum bagging capacity of 12 bags / minute in 40L. Bag transport conveyors provided + bag flattener. Video in operation can be send

Machine type: MIG/MAG welding machine Make Merkle Type ME 202 LK Connection voltage 3 x 400 volts Adjustment range 30 – 200 amps Duty cycle 20% ED at 200 amps 60% ED at 120 amps Current setting 7 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 10 Ampere Dimensions L x W x H 780 x 360 x 590 mm Weight 62 kg Special accessories for point and interval equipment 2/4-stroke gearshift Age approx. 30 years Condition workshop tested very good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire 0.8 mm Ø, D 300, 5kg 1 can of non-stick spray 1 piece spare parts box complete Equipped 1 Piece Instructi ...

Doboy DV semi-automatic volumetric powder filler, hopper volume approx. 55 litres, electrics 380V/50Hz/16A, machine floor space approx. 600 x 600 mm (LxW), machine height approx. 2000 mm, machine net weight approx. 120 kg

Bonding/crimping of toe caps; with preheating device; Spray gluing device (latex adhesive) and pressing device

Fujitsu Luxel T-9000 CTP (Model PT-R8100) – CTP Plate Setter - Quantity: 1 - Manufacturer: Fujitsu - Type: Luxel T-9000 CTP E - Model: PT-R8100 - Application: Imaging of thermal CTP printing plates - Plate size: up to approx. 1,165 x 940 mm - Resolution: up to 2,400 dpi - Plate thickness: 0.15 – 0.30 mm - Laser technology: Thermal laser (multi-channel) - Output speed: approx. 20–30 plates/hour (depending on resolution) - Compatible with various workflow systems - Sturdy construction for prepress environments

Manufacturer: Rösler Model: RWH 6/12-2 Year of Manufacture: 2007 Voltage Supply: 400V / 50Hz Nominal Power Input: 32 kW Nominal Current Input: 64 A Motor Power: 11 kW Motor Current: 20.5 A Control Circuit Voltage: 230 V Frequency: 50 Hz CE Certified: Yes Find more here - / Contact us at -

System Components: Main Control Cabinet - Voltage: 3 × 400 V ±10% - Frequency: 50 Hz - Rated Power: 34.2 kVA - Current: 49.4 A - Fuse: 80 A (gG) - Protection: IP 54 - Type: RCE - Weight: 500 kg - Year: 2020 - Standards: EN 60204-1, EN 61439-1/2 Positioner / Workpiece Manipulator - Type: RPT_05000AR6D PL - Weight: 1800 daN - Year: 2020 - Enables PA/1G optimal positioning - Rotational Axes: 7 - Repeatability: ≤ 0.15 mm Dust Extraction Unit - Model: Dustec 4 XL - Power: 5.5 kW - Voltage: 400 V / N / PE - Air Supply: 6 Bar - Filter Class: M - Year: 09.2020 Welding Technology - Process: MAG (1-wire) - Wires Supported: Solid and flux-cored (Ø 1.0–1.6 mm) - Arc Modes: Short, spray, pulse, long - Power Source: Fronius TPS 600i - Process Optimization: Task-specific Robot & Sensor Periphery - Automatic torch changer - TCP calibration - Internal variable access for diagnostics - On ...

Manufacturer: Georg Model: 4518-3-07 Year of Manufacture: 2008 Material Processed: Cold-rolled steel strip Tensile Strength: 200 – 600 N/mm² Material Thickness: 0.4 – 4.0 mm Strip Width: 300 – 1650 mm Edge Scrap Width: max. 100 mm per side Strip Speed: 0 – 60 m/min Type of Machine: Edge Scrap Cutter with Trough Conveyor Find more here - / Contact us at -

Bausch Advanced Type 529 IV bag filling & sealing machine with Telstar aseptic isolator system, sequence of operation: VHP Chamber (Decontamination) - Debagging/Bag loading table - IV bag infeed conveyor - Laser engraving - Robot loading - Starwheel transport - Gas purging – Filling (product tank/buffer vessel with 20 litre capacity, mass flow measuring system with 2 flow meters, filling accuracy +/-1.0%, CIP/SIP) - Stoppering - Discharge/Reject Robot - Discharge Chute - Reject Chute - Weigh station/discharge conveyor, Mettler Toledo IPC (in process check weighing) system is capable of performing 100% weight verification of each bag. Fully processed bags exit the discharge conveyor and are transferred to the MettlerToledo scale, where they are weighed. Allen-Bradley ControlLogix PLC with Caitron CR17 touchscreen, machine floor space 4590 x 2649 mm (LxW), machine working height 900+/-30 ...

Manufacturer: CNC Model: Speedform RapidCleaner Year of Manufacture: 2017 Function: Fully automatic cleaning device for laser sintering processes. Benefits: - Simplifies, speeds up, and improves the cleanliness of sintered part cleaning. - Reduces or eliminates manual cleaning efforts. - Effective even in small and deep areas. Find more here - / Contact us at -

This machine integrates track building, peeling, and brushing functions - Hydraulic lifter - Electric Control Panel – Operates on 380V / 220V - Hand brusher (Yellow) Find more here - / Contact us at -

Machine Type: Electrode Inverter Welding Rectifier without bi-power device Make Merkle Type MobiARC 284 cel Appendix No. 103.101 Connection voltage 3 x 400 volts Adjustment range 20 – 280 amps Duty cycle 35% ED at 280 amps 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable max. weldable material thickness 7 mm Cooling inverter through built-in fan Portable assembly system design Fuse 16 Ampere Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 9 years Connection for hand and foot remote control Condition workshop tested, very good, incl. UVV test protocol Scope of supply welding system with the following accessories: 1 piece of electrode cable 1 piece ground cable 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 pcs rod electrodes ...

Manufacturer: CIMA Model: RP9HT Year of Manufacture: 2018 Type of Machine: Hot Cure Tire Press Max Air Pressure: 20 bar Mold Size Compatibility: Up to 30.5" Operation: Hydraulic cylinder for open and close Control System: Allen-Bradley PLC Steam-Traps: 4 units Heating: Steam Weight: 28 tons Accessories: Several kinds of molds Tire Size Fitment: Compatible with tire sizes 26.5R25 and 29.5R25 Find more here - / Contact us at -

Manufacturer: CIMA Model: CI Master 1800 Year of Manufacture: 2019 Type of Machine: Extruder Builder Extruder Size: 90mm Pin Extruder (suitable for tire sizes from 17.5R25 to 26.5R25) Configuration: Cold feed extruder with barrel Control System: Allen-Bradley PLC equipped Cooling System: 4x zone temperature-controlled cooler (Hot/Cold) Power Supply: 380V Air Requirement: 8 bar input Expandable Rim Options: 25”, 22.5”, and 20.5” sizes Condition: Brand New Useful for building TBR and OTR tire sizes Find more here - / Contact us at -

Manufacturer: Brunotte & Niemeyer Year of Manufacture: 1968 Type of Machine : Hot cure tire press - Open/close system with hydraulic spindle - Plc cabinet - Press on it self can load tyres by own boards - Air max: 16bar pressure inside - Standard working pressure 8 bar - Hydraulic pump - Heating: Steam - Accessories: optional 24R20.5 XS mould Find more here - / Contact us at -

Manufacturer:Systec Model: VX-95 Year of Manufacture: 2014 Chamber Volume: 104 Liters Design Temperature: -10°C to 150°C Design Pressure: -1 to +4 bar Voltage: 3×400V / 50–60 Hz Current: 15.5 A Protection Class: 1 Find more here - / Contact us at -

Manufacturer: Paladini Model: P1750 Type of Machine: Hot Cure Tire Press Equipped with Steam/Air System for versatile operational needs Powered by 380V/220V electrical supply Integrated Hydraulic Pump for efficient performance Condition: machine is working well Self-Loading System via onboard crane, allowing easy and independent handling Find more here - / Contact us at -

Manufacturer: Thermo Model: HeraSafe KS Year of Manufacture: 2017 Find more here - / Contact us at -

We are offering a complete Water-Cooled Induction Leveling System, composed of the following components: 1. Electrical Power Unit - Power Supply: 3 x 400V, 50/60 Hz - Current (In): 50 A - Short-Circuit Current (Icc): 35 kA - Item: 01 - Type: IFC/A-25 (25 kW / 20 kHz) - Year: 2023 2. Inductor Unit - Manufacturer: ATE - Drawing: 239003100_0 - Item: 03 - Year: 2023 - Type: INDUKTOR RECHTS (Right Inductor) 3. Chiller Unit - Manufacturer: M.T.A - Model: TAEevo TECH 051 - Production Year: 2023 - Voltage: 400V / 3Ph / 50 Hz - Power Consumption: 8.8 kW - Current: 10 A - Protection Class: IP54 - Refrigerant: R410A - Charge: 2.088 kg - Global Warming Potential (GWP): 2088 - Cooling Capacity: 32.0 kW (EWT 20°C, LWT 15°C) - Water Flow Rate: 5.5 m³/h - Water Connections: 1 1/4" - Weight: 239 kg Find more here - / Contact us at -

Hymmen glue application machine 4 Roller Glue Dispensing Machine Type LA 4W Working width 1300 mm 2 rubberized fluted rollers The rubber lining/fluting is in poor condition See pictures 2 rubberized smooth rollers Ribbed rollers diameter 230 mm Smooth rollers diameter 180 mm Maximum passage height 100 mm Application speed 10 and 20 m/min. Motor power 1.1 kW Emergency out of leverage Dimensions 1950 mm x 1100 mm x H 1150 mm Weight with pallet 1300 kg Machine is function-tested Sale in actual condition

Manufacturer: Sigma Model: 3-18K Year of Manufacture: 2011 Technical Specifications: - Maximum Speed: 18,000 rpm - Kinetic Energy: 22,997 Nm - Maximum Density: 1.2 kg/dm³ - Power Supply: 220–240 V / 50–60 Hz / Single Phase - Power Rating: 1010 W - Input Fuse: 10 T (10 Amp slow-blow fuse) Find more here - / Contact us at -

Welding machine, fully functional

Fully functional welding machine

Manufacturer: GEA Model: FX GC VP 260 Year of Manufacture: 2011 Type of Machine : Grasso refrigeration system for ice water return cooling The 2011 GEA FX GC VP 260 is an industrial-grade ammonia (NH₃) chiller from GEA´s Grasso FX GC series.This model is designed for applications requiring efficient cooling with natural refrigerants. Find more here - / Contact us at -

: 2009 current intensivity: 300 A wire dia.: 1 mm : sofort einsatzbereit : 239836 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: JÄCKEL MIG 405 output: 400 AP : water cooling unit: Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: GoodAire 1800 output: 1.800 cbm/Stunde weight of the machine ca.: 200 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Receiver capacity: 40 l working pressure: 4 - 8 bar Air consumption: 250 - 800 l/min. weight of the machine ca.: 20 Kg : 770 x 415 x 365 mm Mobile jet unit with extraction Consisting of: microfilter Boiler 40 liters Blasting gun with 2.5m supply hose The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Receiver capacity: 2 x 37 l working pressure: 4 - 8 bar Air consumption: 170 - 500 l/min. weight of the machine ca.: 36 Kg : 1020 x 460 x 520 mm Mobile beam unit (soda blasting) Consisting of: Nozzle set and moisture separator Boiler 2 x 37 liters Blasting gun with 2.5m supply hose Soda blasting can also be used to clean engine parts, degrease parts, remove graffiti, remove mold, and repair damage caused by fire. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding current: 30 - 200 A connected load frequency: 230 V weight: 3,6 kg Dimensions (LxWxH): 290 x 135 x 2600 mm Scope of delivery: TIG welding machine Buddy TIG 160 Electrode and earth cable 3m TIG torch ET 17 4m Gas hose with union nut The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 1170 x 880 x 825 mm operating pressure: 2,5 - 8,0 bar dimensions: 1,33 x 1,24 x 1,77 m air consumption at 6 bar: 350 l/min weight of the machine ca.: 0,16 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 199,5 x 67,5 x 64 mm operating pressure: 2,5 - 8,0 bar air consumption at 6 bar: 350 l/min weight of the machine ca.: 0,23 t dimensions: 2,10 x 1,30 x 0,88 m Duo blast cabinet 10 PET sheets to protect the windows 10 PET sheets to protect the fluorescent lighting 2 foot pedals 2 jet guns 6 ceramic nozzle inserts (6 mm diameter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Receiver capacity: 80 l working pressure: 4 - 8 bar Air consumption: 250 - 800 l/min. weight of the machine ca.: 36 Kg : 1020 x 460 x 520 mm Mobile jet unit with extraction Consisting of: microfilter Boiler 80 liters Blasting gun with 2.5m supply hose The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 1170 x 580 x 580 mm operating pressure: 2,2 - 8,0 bar dimensions: 1,22 x 0,93 x 1,70 m air consumption at 6 bar: 350 l/min weight of the machine ca.: 0,15 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 10 Kg internal dimension: 135 x 80 x 480 mm output: 0,5 kw connected load frequency: 220 - 240 V setting device: 30 - 180 Grad weight: 15 kg dimensions: 600 x 250 x 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding current: 5 - 160 A connected load frequency: 230 V weight: 7,9 kg Dimensions (LxWxH): 310 x 140 x 230 mm ESAB inverter TIG welding machine Rogue ET 180i CE TIG DC An excellent high-frequency TIG ignition ensures a faultless welding start, as well as even and stable arc properties. Easy to use - setting up the welding parameters is simple and intuitive. Robust design IP23S housing for applications in production plants and on construction sites. Comprehensive TIG functions for optimal process control for every application and a pulse function of up to 500Hz to control the ideal heat input. A PFC module ensures a stable arc and insensitivity to mains fluctuations - even when working with long extension cables of up to 100 meters (PRO version only). Optionally, the welding current can be set from the TIG torch, foot pedal or hand-held remote control. technical data: Primary voltage,  ...

welding current: 10 - 200 A connected load frequency: 230 V weight: 16 kg Dimensions (LxWxH): 600 x 300 x 400 mm TIG welding machine, delivery includes - Earth clamp 300 A with 1.5 meter welding cable - Italian-style electrode holder 200 A with 2 meter welding cable - Carrying strap The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 945 x 605 x 605 mm operating pressure: 2,2 - 5,5 bar dimensions: 1,0 x 0,61 x 1,65 m : 1300 x 1000 x 750 cm Air consumption: 250 l/min. weight of the machine ca.: 0,09 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding current: max. 200 A open-circuit voltage: 14 - 24 V connected load frequency: 230 V weight: 25 kg Dimensions (LxWxH): 500 x 200 x 300 mm Equipment: Hose package Ground cable Welding nozzles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 830 x 530 x 530 mm operating pressure: 2,2 - 5,5 bar Air consumption: 250 l/min. weight of the machine ca.: 50 Kg : 0,95 x 0,65 x ,7 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding current: max. 300 A open-circuit voltage: 55 - 76 V connected load frequency: 400 V weight: 150 kg Dimensions (LxWxH): 900 x 400 x 900 mm Accessories for inert gas welding machine: Hose package 4m. Earth cable 4m Accessories for inert gas welding machine: Hose package 4m. Ground cable 4m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: 700 mm working heigth: 390 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.