mecom rts 39 used for sale

Complete PET Soft Drinks Filling Line for sale by Indassol 1.5 Litre & 2 Litre Concentrated Soft Drinks (non-carbonated) 16,000 - 18,000 bph, Blowing - Filling - Packaging Krones, Krupp, Procomac, Zalkin, Alfa Rollquatro, Hueft, Kisters, Newtec Palletiser (1 Litre Filling Line also available) PLEASE NOTE Both Lines were used by Princes Soft Drinks for the production of Non-carbonated Concentrated Soft Drinks. The Krones Fillers on both Lines are Counter Pressure Fillers and the Lines could be adapted to produce Carbonated Soft Drinks by the addition of a Carbonation Unit to the process plant. ADDITIONAL ITEMS AVAILABLE 2 off Bellis & Morcom High Pressure 40 Bar Compressors. Machines are from 1987 but have been subject to a full Service Agreement with Gardner Denver. Lachenmeier H-Multi Flex Pallet Wrapper/Hooder (shared with Line D6) Serial No. 39031 (2 ...

Spindle diameter: 0 mm Cross X: 0 mm Vertical Y: 0 mm Table length: 0 mm Table width: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 1000 mm Table width: 810 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y axis): 770 mm Vertical travel (z axis): 670 mm Table swiveling + -: 360 ° Table load max.: 1200 kg Execution: Horizontal Longitudinal feeds: stepless from: 3000.00 mm/min Transversal feeds: stepless up to: 3000.00 mm/min Drill spindle diameter: 75 mm Drill spindle travel: 670 mm Spindle speeds: stepless from: 10 rpm up to: 1200 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 11 kW Machine´s weight about: 10000 kg Overall dimensions machine: Length: 3970 mm Width: 2600 mm Height: 2980 mm Various accessories: Tool cabinet Rotary table dimensions:: DIXI 450 P Diameter: 450 mm Set of boring head

Machine type Pulse-Arc-Inverter-Welding system Make MERKLE Type HighPULSE 284 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 100% ED at 200 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Special accessories Connection for water cooling Weight 33 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welder gloves with cuff 1 piece spare p ...

DATA ON THE MACHINE Machine type: CNC milling machine Manufacturer: HERMLE Model: UWF1001H Built: 1991 Condition: used Location Warstein , Germany Reference M-HER-0221 Description We offer you a used CNC milling machine from manufacturer Hermle. Control Heidenhain TNC 407/415 Monitor new x-path 700 mm y-path 550 mm z-way 500 mm Table clamping area 650 x 395 mm Spindle speeds - infinitely 20- 4200 rpm Spindle holder ISO 40 DIN 2079 Pinole stroke vertical 95 mm Drive spindle motor 12 kw Machine weight approx. 3.8 t Space requirements approx. 5 x 4.6 x 2.5 m Electrics 400 Volt Coolant device Fixed angle table 1000 x 490 mm Vertical milling head swivel. +/- Full-protection cabin Separate control cabinet (absolutely clean and uncrafted) electronic handwheel Our offer is aimed at professionals who are covered in accordance with the Trade Code in accor ...

Large format printer Manufacturer: Roth and Weber Model: 3300-6 Year: 2004 Equipment 6-roll fully automatic machine Number of prints 399,369 sqm Availability: now Condition: Defects 1 piece of heating lamp must be replaced Location: germany Price: on request

Machine type MIG/MAG welding system Make CEBORA Type MIG STAR 550 S Plant No. 991502 Connection voltage 3 x 400 volts Setting range 40 - 500 amperes Switch-on time 60% ED at 500 amperes 100% ED at 390 amperes Current setting 32 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed gearbox 4-wheel drive Fuse 32 Ampere Dimensions L x W x H 1,000 x 500 x 1,250 mm Weight 190 kg Age approx. 25 years Condition workshop-tested, good, incl. UVV test protocol Special accessories 3 x throttle pick-ups Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 piece user manual Warr ...

Complete Printshop package: HP DesignJet T7100PS (42 ", 1067 mm) 3 roll feed plotter Printing capacity 9,490 m² see usage report HP DesignJet T7200 (42 ", 1067 mm) 3 roll-fed plotter Printing capacity 74,460 m² see usage report HP DesignJet Z6800 (60 ", 1520 mm) overhauled plotter Printing capacity 1,195 m² see usage report HP PageWide E77660 (50/70 ppm) with finisher (Punsh, Staples) Printer Printing capacity 258,424 (total) see consumption page HP LaserJet 4050 TN (3 trays paper feed) Printer DYMO LabelWriter 310 Printer Konica C754 (1 underfeed bin) Printer including toner (x8) € 25.00 each EFI Model: Color Profiler Spectrometer ES-1000 Spectrometer HP Sanner 4520 (42") scanner Avision AV 220 C2 A4 scanner Avision FB 2080E Scanner A3 Rowe 721-1 (folding width 96 cm) including cross folding Folding machine P ...

Laboratory Press EHSP125 - Demonstration Machine Table press / electric spindle press with pressing pressure 20 KN (2 tons). Press drive with screw jack, reduction ratio 1 : 12, spindle diameter 32 mm, pitch 6 mm, pressing surface approx. 100 100 mm, clear height and stroke approx. 300 mm. Gear motor 0.37 KW, 1,390 rpm, 4-pole, with spur gear i = 1 : 5, Speed 150 mm / min. Max dynamic load 20 kN. With reversible control, emergency stop and motor protection plug. Sturdy steel press frame. Base table made of high-quality aluminum profiles 4545 mm, table surface 600 600 mm, table top made of multiplex top. Total weight approx. 100 kg. The table press has 20 kN pressing pressure (dynamic load). Typical applications are pressing work with exact delivery. Suitable for pressing bonding, embossing and impressions. The screw jack has a twist protection so that the p ...

Replacement columns for die-casting machine OL1600, D250 x 5908mm, 250 x 14mm, Idra, new -50% Special price -50% from new price! Attention: This is a brand new, machined and finished column, for which we ask only the current raw material price: D 260 x 6m long = 2.550 kg x € 2,9 = € 7.395 If you have a VAT number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely as new and in the original packaging. Thread fixed end 290mm lg Thread adjustable end ca. 1160mm lg Weight approx. 2300 kg

Control: HEIDENHAIN TNC 360 Technical data Table length: 900 mm Table width: 530 mm Longitudinal travel (X-axis): 560 mm Transversal travel (y axis): 500 mm Vertical travel (z axis): 400 mm Spindle speeds: stepless horizontal from: 5 rpm up to: 5000 rpm vertical from: 5 rpm up to: 5000 rpm Spindle nose: ISO: SK 40 DIN 69871 Feeds: longitudinal from: 1 mm/min up to: 8000 mm/min transversal from: 1 mm/min up to: 8000 mm/min vertical from: 1 mm/min up to: 8000 mm/min Rapid traverse:: 10 m/min Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 3350 kg Overall dimensions machine: Length: 3930 (2625) mm Width: 2650 mm Height: 2140 mm Various accessories: Electronic hand held control Coolant system

Replacement columns for aluminium die-casting machine OL2000, D285 x 6830mm, 285 x 10mm, Oleopress, new -50% Special price -50% of the original price! Attention: This is a brand new, machined and finished column, for which we ask only the current raw material price: D 300 x 7m long = 3958 kg x € 2,9 = € 11.478 In addition, we also have a spar nut and 2 adjusting nuts in separate advertisements. If you have a VAT number we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely new and in ist original packaging.

Control: SIEMENS SINUMERIK 840 D Operating hours: 29500 Technical data Number of axis total: 4 Number of spindles: 2 Distance spindle nose: 580 mm Swing over cross-slide: 100 mm Swing over bed: 145 mm Spindle hole: 50 mm Turning diameter: 100 mm Bar diameter with collet: 36 mm Clamping chuck diameter: 140 mm Carriage 1: Longitudinal travel (Z-axis): 320 mm Transversal strocke (X axis): 220 mm Carriage 2: Longitudinal travel (X-axis): 345 mm Cross travel (z-axis): 120 mm Turret slide: number: 2 Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 12 Driven tools turret 2: 12 Spindle speeds: 30/6000 rpm Spindle speeds: 30/6000 rpm Power of driven tools: 2.1 kW Plage vitesse de rotation rad./axial: 30/6000 rpm Collet bore: 36 mm Spindle speeds: stepless from: 40 rpm up to: 8000 rpm Back spindle: max. speed: 40/8000 rpm Power of back spindle: 26/21 kW st ...

Cycle Times: ? 28 gm (48 cavity) : 24~25sec ? 56 gm (48 cavity) : 25~26sec Including - Mold, 48 Cavities, 27g, for 250ml and 300ml. (Milk Bottle), Mold is not used a lot. - YUDO Side Entry robot included. - Screw diameter: 105 mm - Shot weight max: 3.950 g - Injection pressure: 1.280 bar - Clamping force: 4.500 kN - Mould opening stroke max: 820 mm - Distance between tie-bars h: 850 mm - Distance between tie-bars v: 740 mm - Power: installed max: 390 kW

Technical data Centre height: 390 mm Distance between centres: 1600 mm Grinding wheel: Diameter: 600 mm Width: 80 mm Bore: 305 mm Max. grinding diameter: 600 mm Workpiece weight on centres max.: 400 kg Grinding wheel speeds: Peripheral speed: 30 m/s Angular displacement Work piece spindle head: speeds: number (steps): 6 from: 16 rpm up to: 168 rpm Spindle hole: 38 mm Spindle taper:: 5 MT Taper in tailstock:: 5 MT Table angular displacement: +/-10 ° Table speed: stepless from: 0.1 m/min up to: 6 m/min Voltage 50 Hz 3x: 380 Volt External Grinding wheel motor: 15 kW Workpiece spindle motor: 2.2 kW Machine´s weight about: 8000 kg Overall dimensions machine: Length: 4400 mm Width: 2300 mm Height: 2250 mm Various accessories: Coolant system: 450 L Flange with wheel Lamp Hydraulic tailstock

Product number: 1948 Type: COO 1350x6000 Serial number: 3-000015705 Year of construction: 2015 Belt width: 1350 mm Tiers: 3 pcs .Belt speed: 2.4 - 18 m/min .Heating: thermal oi lCooking length: 1 or 3 x 6000 mm Power: 3 x 400V, 50Hz, 18.6kW Dimensions: 8100 x 2850 x 2900 mm Flexibility in tiers: 1 linear or 3 multi-tierWith With NOVAtech dew point measurement With Clean In Place system (CIP) Provisur / Marvu infeed belt Project number: 140347200 Type: 390 Serial number: 1 Year of construction: 2014 Belt width: 1350 mm Infeed height: 1200 mm Power: 3 x 400V, 50Hz, 1.1kW Dimensions: 2300 x 2100 x 1900 mm Weight: 700 kg Provisur / Marvu outfeedbelt Project number: 140347300 Type: 614 Serial number: 1 Year of construction: 2014 Belt width: 1350 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions; 2350 x 1700 x 1200 mm Weight: 330 kg Adjustable in height and lengt ...

Technical data: - Load capacity E. chain hoist 250 kg - Lifting speed approx. m/min - Operation of the chain hoist via hand remote scanner - Man. Process hoist / transverse path + longitudinal path - Track gauge variable to approx. 3500 mm - Hook height approx. 2800 mm - Crane track length approx. 5000 mm - Height approx. 3900 mm - UK crane carrier approx. 3000 mm - 4 pieces of steel supports made of recheck tube 150 x 100 mm H 3900 mm - 2 longitudinal suspension carriers approx. 5000 mm - Cross suspension carriers approx. 3500 mm - Weight of the plant approx. 1000 kg

Key data: 1000 Siemens, 3936 840D Shopturn

Turning diameter: 1000 mm Turning length: 3936 mm Turret positions: 0 CNC Brand: Siemens CNC Model: 840D Shopturn Motorised Tailstock Siemens 840D shopturn Steady rest 4 chuck 1000 mm 3 chuck   630 mm Chip conveyor 4000 mm x 1100 Hohe Parat tool system with insert Max. turning Ø:1.000mm X-Axis:        750mm Z-Axis:        3.936mm Spindle bore:  160mm Speedrange:    660Rpm Spindle power: 39kW Chip conveyor: Yes  Pinole taper:  6Mk Stroke pinole: 300mm Quill Ø:       160mm Length:        10.000 mm  Width:         2.600 mm  Height:        2.600 mm  Weight:        14.000 kg 

2005 Model 1765 kw 1800 rpm REINTJES Gear Box 7455/1 1 of them clockwise 1 of them counter clockwise Working hours one of them 3850 and 3960. caglar@dortelgemi

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 351 KW Connection voltage 3 x 400 volts Setting range 25 - 350 amperes Switch-on time 60% ED at 350 amperes 100% ED at 300 amperes Current setting 28 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 845 mm Weight 190 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 504 W, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 piece use ...

Key data: 390 Fanuc, 800 18i-TB, 12

Turning diameter: 390 mm Turning length: 800 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 18i-TB Gantry loaded Bar feeder Double chuck 250 mm Axis X1 / X2 / Z1 / Z2 / C1 / C2 / Y / B Axis Max. turning Ø:  390mm X-Axis:          255mm Y-Axis:          120(+60/-60) mm Z-Axis:          800mm B Axis:          800° Spindle bore:    76mm Speedrange:      3500Rpm Spindle power:   26kW Subspindle speeds:4000Rpm Subspindle power:26kW ATC / revolver:  12 Speed live tools:4000Rpm Chip conveyor:   Yes  Tool eye:        Yes  Length:          4.000 mm  Width:           3.200 mm  Height:          ...

pressure:100 t table length:1280 mm table width:900 mm stroke max.:1100 mm dimensions:2100 x 3800 x 3900 mm Approx. weight (w/o operational materials):11 t Engine Output:9,5 kW pre-running speed:48 mm/sec Return speed:44 mm/sec Oil Tank Capacity:140 l distance between columns:1150 mm distance table/ram:1035 mm Table height above ground level:630 mm ram surface:1000 x 1200 mm column travel -side:705 mm workpiece weight:max. 7 t Plum:max. 3,5 t Press speed:8 mm/sec

Table length: 1650 mm Table width: 360 mm Longitudinal X: 1270 mm Cross Y: 280 mm Vertical Z: 400 mm OPTIMUM - OPTImill MT 200 Universal milling machine 1290 x 280 x 400 mm MACH - ID 6340 Make: OPTIMUM Type: OPTImill MT 200 YOP: 2013 X-Axis    1.270 mm Y-Axis       280 mm Z-Axis       400 mm Table Length       1.650 mm Table Width          360 mm Table load             450 kg Spindle speeds      1750 Rpm Feed rate X-Axis      420 mm Feed rate Y-Axis       393 mm Feed rate Z-Axis       168 mm Stroke pinole             ISO 50 mm Dimensions Length       2.160 mm Wi ...

Table length: 1750 mm Table width: 800 mm Longitudinal X: 1600 mm Cross Y: 800 mm Vertical Z: 800 mm Positions ATC: 48   Positions APC: 0   CNC Brand: Fanuc WELE - TOYODA AA1680 VMC X 1600 x Y 800 x Z 800 mm MACH - ID 6271 Make: WELE Type: TOYODA AA1680 Control: FANUC 18i-MB YOP: 2012 Hours: 3953 X – Travel    1.600 mm Y – Travel       800 mm Z – Travel       800 mm Table Length       1.750 mm Table Width     800 mm Table load         2.000 kg Spindle Taper     40 ISO/Bt/Mk Power on spindle      15 kW Speeds / ranges       12.000 Rpm ATC / revolver        48 Coolant true spindle / Bar        25 Number of controlled ax ...

HENRY SØBY CR200 Brand:HENRY SØBY Type:CR200 Stock number:M21-1276 Cooling capacity:390 kW Application:Freezing Displacement:1,997 m³/h Refrigerant:R717 (NH3/Ammonia) Voltage:400 Volts Motor power:132 kW Weight:2,500 kg Year:1984 Number in stock:1 piece(s) Price:Quotation Request Description: An ammonia Henry Søby booster screw compressor unit with Unisab 3 controller and an oil separator (1082 liters). Mentioned capacity at an evaporating temperature of -40°C and a condensing temperature of -10°C. Visit also our website: used-refrigeration

Sheet thickness: 65,00 mm Bending length: 3000 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: HAEUSLER MACH-id       5424 MAKE           Haeusler Swiss TYPE             VRM - HY YOP               2001 SPECIFICATIONS Rolling width        3100 mm Rolling thickness 3  x toproll Ø     45 mm Rolling thickness 5x toproll  Ø       60 mm Rolling thickness prebending        40 mm Top Roll Ø       570 + 430 mm Bottom Roll Ø     540 mm Side roll Ø      420 mm Number of rolls      4 Rolling speed       2/4/6 m/min Control        HAEUSLER  ...

Oven 700 1.3x1.3x1.5m Auto door PLC top quality Giessereianlagen Giessereimaschine Giessereimaschinenbau Giessereitechnik Giessereizubehör Glasschmelzöfen H aubenöfen Herdwagenöfen Hochtemperaturöfen Induktionsanlagen Industrieöfen Industrieofenanlagen Industrieofenbau Kammeröfen Keramikbrennöfen Kippofen Kupolöfen Laboratorien Laboröfen Lötofen Maschinen Muffelöfen Nachverbrennungsanlagen Öfen Ofenanlagen Ofenbau Ofenbauzubehör Prozessanlagen Prozesssteuerungssysteme Pyr lyse Pyrolyseöfen Regelungstechnik Retortenka meröfen Retortenofen Rohrofen Salzbadöfen Schmelzofen Sinteröfen Thermoprozessanlage Thermoprozesstechnik Vakuumglühofen Vakuumkamme fen Veraschungsöfen Versuchsofen Vorwärmofen Wachsausschmelzverfahren Wannenofen Wärmebehandlung Wärmebehandlungsöfen Wärmebehandlungsverfahren Wärmerückgewinnungsanlagen Warmhalteofen Poreba Gurut ...

Capacity: 40 t Folding length: 1000 mm CNC Brand: Cybelec CNC Model: DNC 880 MACH-id    5203 MAKE         Beyeler Swiss TYPE           RTS 40 / 1000 YOP             1987 SPECIFICATIONS Max. bending length       1000 mm Distance between column       1000 mm Max. pressing force        40 T Dis. Beam - table        380 mm Troth beam          350 mm Approch speed         110 mm/min. Working speed          10 Return feed         120 mm/min. Adjustment       X-Axis bac gauge   500 mm Number of controlled axis         3 Control   ...

• Bandwidth / strip width: 1,600 mm • Strip thickness / strip thickness: 0.4 - 2.0 mm • Coil inner / coil inner-a:390-420 mm • Coil outer / coil outer-a: 1,500 mm • Spreading/ spreading: hydraulic/hydraulic • Motor drive AC servo cooling • For invertrers • Speed: 15 m/min. • Attachment segments for 500 mm • Reel shift: 200 mm • Working method: from top and bottom • Hydraulic valves on board

Turning diameter: 820 mm Turning length: 2000 mm Turret positions: 12 Positions ATC: 0   Number controlled axis: 0   CNC Brand: Fanuc MACH-id    5188 MAKE        Takisawa TYPE          NEX 715 H 20 YOP            2011 SPECIFICATIONS Max. turning diamter Ø     820 mm Swing        620 Ø DBC Turning length    2000 mm X-Axis      395 mm Y-Axis      80 mm Z-Axis       2100 mm C-Axis       360.000 ° Spindle bore   117 mm Main Spindle speed       2000 Rpm ATC / revolver    12 Speed live tools      4000 Rpm Power live tools      5.5 kW Control       Fanuc 21 i Chip con ...

1903 ASA Aspirator Rated volume flow 1900 m3/h Low pressure max. 1700 Pa Filter area 1.92m2 Chip collection volume 110l Suction nozzle diameter input 203mm Suction nozzle diameter output 2x 100mm LxWxH 1000 x 500 x 2100mm Weight 39kg Engine 400V 50Hz 1.5kW G&STÜ-5128193

Machine type point welding pliers Make TECNA Type Power Pointer 7900 Connection voltage 1 x 400 V switch-on time 50% ED at 2.0 kVA current setting infinitely variable max. pointable material thickness 2.0 + 2.0 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 7.2 kA discharge min. 125 mm max. 500 mm Weight 12 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,210.00 + VAT Price €720.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 € Item No. n353.5.3910 Electrode sharpener for hand cutting 129.00 € Item N ...

Machine type point welding pliers Make TECNA Type Power Pointer 7902P - Pulse Connection voltage 1 x 400 V switch-on time 50% ED at 2.5 kVA current setting infinitely variable max. pointable material thickness 2.5 + 2.5 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 8.2 kVA discharge min. 125 mm max. 500 mm Special accessories incl. pulse current, especially for galvanized sheets Weight 13 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,490.00 + VAT Price €890.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 €  ...

Turning diameter: 920 mm Turning length: 4000 mm Turret positions: 0 Positions ATC: 120   Number controlled axis: 0   CNC Brand: Mazatrol CNC Model: 640 M MACH-id    5073 MAKE         Mazak TYPE           Integrex e-650H YOP             2002 SPECIFICATIONS Max. turning diamter Ø   420 mm Swing         920 X-Axis          260 mm Y -Axis         650 mm Z-Axis           4150 mm B Axis +         210 B Axis           -240 C Axis          360000 ° Control         M azatrol 640 M ATC tool changer       120Power kW live tools& ...

The Siemens three-phase asynchronous motor is unused, therefore as good as new! Name: Asynchronous Motor Manufacturer: Siemens Type: 1PH72282HF0101BB9-Z Year built: 2011 Hours of operation: 0 Std. Empty weight: weight 870 kg Construction form: V5 Dimensions: length: 1500 mm, width 600 mm, height 700 mm Speed: 1500 / 1750 / 2000 rpm Operating voltage: 340 /395 /450 V Type of protection: 55 IP Description: three-phase asynchronous motor/squirrel-cage motor Technical documentation: yes (PDF) Performance: 160 / 179 / 196 kW Frequency: 51 /59 /67 Hz Rated current: 350 / 342 /332 A. Torque: 1750 /2000 Nm Message: max. coolant temperature: 40°C, max. speed: 4500 rpm Price: on request

Storage number: 3590 CONTAINER ROTARY DEVICE Manufacturer: HENDRIKS, Type: 100 T Machines NR.: 06, Built: 2009 specifications: Size workpiece weight 100000 Kg Diameter 4800 mm Rolls slide. 700 mm Rolls width 480 mm Stepless rotations m/min Engine power 2 x 0.75 kw Drive rollers 1 pc Running rollers 1 pc Length: 3900mm (3700), Height: 1200 mm, Width: 1300 mm (900), Weight: 5000 kg

Turning diameter: 600 mm Turning length: 1190 mm Turret positions: 12 CNC Brand: _Unknown / Other CNC Model: DMG MACH-id   4206 MAKE       DMG TYPE         NEF 600 YEAR         2009 SPECIFICATIONS Swing over bed     600 Distance between centres   1.190 Power kW liove tools    4500 Rpm X Axis      398 Controll      Heidenhain CNC Pilot 4290 Tool changer     12 Chip conveyor    Yes Swing over bed Ø     600 mm DIMENSIONS Length       3550 mm Width         2700 mm Height        1900 mm Chuck ROTA-S plus 315  DMG NEF 600 CNC Lathe with live tools

Center height: 320 mm Center distance: 4000 mm Spindle bore: 82 mm MACH-id    4101 MAKE        VDF Boehringer TYPE          DUE 630 YEAR        1991 SPECIFICATIONS Swing over bed Ø    640 mm Control        Conventionel Swing over cross slide       395 mm Distance between centres    4000 mm Work piece weight        4000 kg Spindle bore       82 mm Spindle speeds / ranges      1800 Rpm Bed width       450 mm Power        22 Kw DIMENSIONS Length     7000 mm Width      1800 mm Height     1800 mm​

Screw compressor system semi-thermal air conditioning compressor Compressor Chiller 2 x 30 Kw electric for air conditioning systems. 2x Screw compressor Manufacturer: RefComp Type: SRC-S-133 Ser.-No.: RE00093364 & RE00093366 400 V; 277/398 A; 50 Hz; IP54 rated power Leistg.: 30 kW Funding volume: 150 m3/h Pressure: 19-26.5 bar 3x Shell and tube condensers Manufacturer: WTK Type: CF270 CA2P Y.O.M.: 2009 272 kW (46.80 m3/h); 273 mm Tube Side: 10-11 bar; -10/+120 °C; 26.0 dm3; H2O Shell Side: 30-33 bar; -10/+120 °C; 85.9 dm3; gas with control box / control box with main switches, control & switching modules & pcd7. D232 terminal display. with piping and other various extensions, all mounted on a sturdy 4-edge dread tube frame. Total approx. 3450 x 1400 H 1900 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate s ...

Microbiological protection and PCR cabinet with vertical air flow General characteristics Vertical hood with laminar flow, Class 100 is used for handling different samples in a sterile environment without turbulence and without impurities in the working room. Protects the work area both against microorganisms and other air contaminants, chemically toxic vapors and unpleasant odors, .. etc. Automatic electronic monitoring system controls all functions and all safety alarms of the system according to EU norms offers many working possibilities: 1) Overpressure system: part of the sterile air is evacuated through the front opening. 2) Pressure lowering system: part of the filtered air is evacuated while the outside air is partially brought inside creating a protective barrier without affecting the laminar flow. Protection of personnel and the environment, but can also be used for work ...

T-slotted Floor Plates Number of T-slots: 5 T slot size: 28mm Total dimensions LxWxH: 3900x1600x400mm Weight: 4.300 kg

20191 Brand Gearbox ZF Model Gearbox BW 191-1 Ratio 4.393:1 Power 480 kW RPM 1800 Serial Number 2113 General condition Taken out running condition Options Flexible Coupling SAE Housing Controls Mechanical Specific Features Brackets Oil cooler Weight (kg) 632 Dimensions (cm) 70 x 85 x 120

wire diameter 0,2-0,8 mm spring diameter 20 mm feeding length 3910 mm output pieces/min 220

Sheet thickness: 3,00 mm Bending length: 1550 mm Number of rolls: 2   CNC Brand: Siemens CNC Model: Simatic Panel MACH-id    3994 MAKE        Lisse France TYPE          B 155 . 30 YEAR         1997 SPECIFICATIONS Controll     Siemens Simatic Panel Hydraulic / Mechanical    Hydraulic 3 or 4 roll      2 Maximum sheet thickness    3 mm Bending length      1550 mm Max. Rolling capacity Ø    2.500   3 mm Max. Prebending capacity Ø 2.500   3 mm Top Roll Ø   120 mm Bottom Roll Ø   300 mm

Water filter station, water treatment with diesel engine and compressor in container used manufacturer: Type: WFS 3/76 Year of construction: 1977 The operation can be done with third-party network or own network via: Diesel engine FIMAG Finsterwalde Type 6-1521/104-0 10 kVA 14.8 A 390 V 50 Hz follow Total dimensions: approx. 6 x 2.4 x 2.4 m Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Turning diameter: 1600 mm Center distance: 10000 mm Spindle bore: 0 mm Numbers of bed guide ways: 0 Weight between centres maximum: 40000 kg MACH-id     3990 MAKE         Poreba Poland TYPE           TCG 160 YEAR         1995 SPECIFICATIONS Swing over bed Ø      1600 mm Swing over cross slide       1300 mm Distance between centres    10.000 mm Work piece weight       40.000 kg Spindle speeds / ranges        200 Rpm Bed width      1300 mm Power        75 Kw DIMENSIONS Length         15900 mm Width           2800 mm Height         2800 mm Poreba TCG 160 lathe, we ha ...

Code 171305 Description CNC surface grinding machine Make DANOBAT Model PSG - 1000 Serial No. 30102 A Control Fanuc 210i - M Year 2001 Tablesize 1000 x 500 mm Grinding surface L x W x H 1000 x 600 x 450 mm Long ( X axes ) 1150 mm Cross ( Z axes ) 500 mm Speed table movement 1 – 30 m/min. Max. distance table – centre grinding wheel 650 mm Max. workpiece weigth 1500 kg Max. table load 1500 kg Magnetical plate size L x W 1000 x 500 mm Grinding stone dim. Stone x Wide x Taper Ø 400 x 100 x Ø 127 mm Spindel power 7,5 kW Spindel speed 1500 rpm Motor power 7,5 kW – 380 Volt Total electr.com. 20 kW Total space L x W x H 3950 x 3150 x 2550 mm Weight 5500 kgs Accessoiries Elec. Magneticplate 1000 x 500 mm Coolant with paperfilter Digital readout Grinding stones, etc. Condition Machine is in g ...

Walzenstuhl Kaffee Mühle Bühler-Miag MDWA-25/10A - used - For grinding cereals and similar raw materials. The Wahlzenstuhl was previously used for grinding coffee beans. Manufacturer: Bühler-Miag Type: MDWA-25/10A Masch-Nr.: 1291 Year: 1977 Opening top approx. 960 x 395 mm with perforated sheets Roll diameter 250 mm Roll length 1000 mm Manual indentation and disengagement Drive motor Bauknecht 7.5 kW Operating instructions/documentation for the machine available. Total approx. 2200 x 1600 x 1450 mm Weight according to instructions approx. 3100 kg Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Rated power at 50%ED: 35kVA Short circuit current: 19kA Electrode force: 300daN / single stroke Projection: 395mm --- Welding control: WS 708 (7 times, 8 program) --- Incl. additional options: - Foot switch - Pressure-free lowering of the upper fitting - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Drilling capacity: 50 mm Radius: 1600 mm Spindle taper: 0   MACH-id   3997 MAKE   MAS Kovosvit TYPE    VO 50 / 1600 YEAR    1995 SPECIFICATIONS Arm Length    1600 mm Drilling capacity   60 mm Drilling capacity steel Ø 50 mm Drilling capacity cast iron Ø  60 mm Tapping MM   50 Spindle taper Mk   5 Spindle diameter Ø  55 mm Spindle travel   310 mm Floor / table area    1470 x 986 mm Power    6 kW Spindle speeds / ranges    2500 Rpm DIMENSIONS Length   2900 mm Width    1500 mm Height   3200 mm

INTERMEDIATE SHAFT YES CONNECTING ROD N°1 Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between tableand slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons