mecom rts 39 used for sale

bore capacity in steel (diameter): 30 mm x-travel: 850 mm y-travel: 435 mm Control: HEIDENHAIN TNC 150 total power requirement: 16 kW weight of the machine ca.: 3500 kg dimensions of the machine ca.: m F E H L M A N N (Switzerland) CNC-Controlled High Precision Drilling and Milling Machine with HEIDENHAIN CNC-Control Model TNC 150 Model PICOMAX 100 CNC – 2 + A Year 1985 Serial No. 16 085 109 _______________________________________________________________ Table travel: Longitudinal ( X-Axis) 850 mm Cross (Y-Axis) 435 mm Milling/Boring head travel vertical ( Z-Axis) 210 mm Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm Mounting height below spindle, approx. 140 / 690 mm Height adjustment of Milling head max. 540 mm Distance between spindle and column 450 mm Spindle tape ...

screw size: 115 mm injection shot weight in Polysterol: 3915 g/PS closing pressure: 6600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 360 mm saw band length: 5000 x 34 x 1,1 mm cutting width: 640 mm cutting capacity - flat: 510 x 360 / 30° mm cutting capacity - round: 360 / 30° mm cutting capacity - square: 360 x 360 / 30° mm cutting capacity - flat: 390 x 360 /45° mm cutting capacity - round: 310 /45° mm cutting capacity - square: 360 x 360 / 45° mm cutting capacity - flat: 250 x 360 /60° mm cutting capacity - round: 310 / 60° mm cutting capacity - square: 270 x 270 / 60° mm cutting capacity - flat: 640 x 360 / 90° mm cutting capacity - round: 360 / 90° mm cutting capacity - square: 360 x 360 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 1,1 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 4,3 kW weight of the machine ca.: 1630 kg dimensions of the machine ca.: 3000 x 1200 x 2000 mm Accessories: • Inverter • hydraulical vice • automatical ...

Table length: 1219 mm Table width: 508 mm Longitudinal X: 1016 mm Cross Y: 508 mm Vertical Z: 508 mm Positions ATC: 21   Positions APC: 0   CNC Brand: _Unknown / Other CNC Model: 88 HS MACH-id    3996 MAKE         Fadal USA TYPE           VMC 4020 HT YEAR          1995 SPECIFICATIONS X - Travel   1016 mm Y - Travel     508 mm Z - Travel     508 mm bed / plano / portal / moving column   VMC Controll    88 HS Table Length x Width   1219 x 508 mm Table load in kG     1652 Kg Spindle Taper     Bt 40 kW power on spindle        11.2 kW Spindle speeds / ranges     10.000 Rpm ATC tool changer     21 Number off controlled axi ...

Center height: 200 mm Center distance: 1200 mm Spindle bore: 51 mm CNC Brand: Siemens MACH-id   3987 MAKE       VDF Boehringer TYPE         DUS 400 Ti YEAR        2007 SPECIFICATIONS Swing over bed Ø   420 mm Controll  Siemens Swing over cross slide   230 mm Distance between centres    1200 mm Work piece weight    500 kg Spindle bore    51 mm Spindle speeds / ranges   3000 Rpm Power  11 Kw DIMENSIONS Length   3420 mm Width    1925 mm Height   1600 mm VDF DUS 400 Ti Teach in lathe  

turning diameter over bed: 310 mm turning diameter over slide rest: 178 mm turning length: 910 mm turning dia. in gap: 420 mm spindle turning speed range: 70 - 2000 U/min spindle bore: 38 mm number of feeds: 18 Stk feed range: 0,052 - 1,392 mm/U metrical thread cutting: 0,4 - 7 mm voltage: 230 / 50 V Hz total power requirement: 1,1 kW weight of the machine ca.: 0,45 t dimensions of the machine ca.: 1,6 x 0,8 x 1,4 m • incl. 3 and 4 jaw chuck • fixed and followed steadies • reducing bush MK4 - MK3 • 2 fixed lathe centers • 1 Set of changing wheels • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1000 mm grinding width: 600 mm workpiece height: 450 mm Control: Fanuc 210i - M total power requirement: 20 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3950 x 3150 x 2550 mm CNC surface grinding machine Clamping area of the table 1000 x 500 mm Clamping surface for magnetic particle board 1000 x 500 mm Largest grinding surface: L x W x H 1000 x 600 x 450 mm Largest distance from table to spindle center 650 mm Table speed in the longitudinal direction 1 - 30 m / min Max. Table load 1500 kg Grinding wheel: diameter x width x bore 400 x 50 x Ø 127 mm Grinding spindle drive 7.5 kW Spindle speed 1500 rpm Connected load 20 kW Space required L x W x H 3950 x 3150 x 2550 mm Weight 5500 kg Equipment CNC control Fanuc 210i - M Electro magnetic plate 1000 x 500 mm Coolant device with paper filter Several Grinding wheels with flanges Digital display Condition  ...

x-travel: 600 mm y-travel: 350 mm z-travel: 140 mm table surface area: 700 x 300 mm spindle taper ISO: 40 spindle turning speed range: 100 - 4000 U/min distance spindle center to column: 395 mm distance spindle nose and table: min. 170 -max. 550 mm control: TNC 407 milling feeds: 3 + 2000 mm/min rapid traverse: 5000 mm/min spindle drive: 5,5 kW total power requirement: 9 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 2,5 x 1,8 x 2,2 m • control HEIDENHAIN TNC 407, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: 2451 mm Working width: 1670 mm Working height: 800-1000 mm Neue Haberkorn Rückfördereinrichtung nach Vierseitenhobelmaschine ------------------------------------------------------- Förderanlage für Holzlängen von 300 mm-4200 mm Pos.1 Längs-Quer-Länsförderer ca.2451 x 1670 mm - höheneinstellbare Stützböcke (ca.800 mm - 1000 mm) - stufenlos angetriebene Rollenbahn ca.5-25m/min, - Rollendurchm.50mm, 140mm Rollenmantellänge - Übergabe auf Querförderer durch Heben-Senken der Rollenbahn - Querförderer mit 6 Stck. Traversen - Förderbänder 50mm breit, in Kunststoffbahnen geführt - Antrieb ca.5-25m/min, 0,37 KW - ca.1250mm von Anschlag zu Anschlag - Übergabe als Hebesenkeinrichtung - angetriebene PVC beschichtete Stahlrollen, Durchm.50mm, 140mm Mantellänge - Antrieb ca.5-25m/min, 0,37 KW - Rollenabdeckung nach HBG Pos.2 Förderband ca.3000 x 260mm - höheneinst ...

Turning diameter: 1400 mm Turning height: 600 mm Chuck diameter: 1400 mm Number of chucks: 1   CNC Brand: Fagor CNC Model: 8055 MACH-id    3988 MAKE         Hegenscheidt Germany TYPE           RQ YEAR          Overhauld 2006 SPECIFICATIONS Controll    Fagor 8055 Max. turning diamter Ø    1400 mm Table / chuck size Ø     1400 mm Workpiece height     600 mm Work piece weight    2000 Kg Singel column or double column   Single column Spindle speeds / ranges   2 steps - 224 Rpm Power   50 Kw DIMENSIONS Length    3800 mm Width      3500 mm Height     3500 mm In 2006 Rebuild:Control Fagor 8055 CNC Rittal Electric cabinet New cable  ...

axis stroke (X,Y,Z): 3950,2145,555 mm Number of spindle head vertical: 13 St. Number of spindles head horizontal: 6 St. Number of tools: 22 St. Number of milling agregates: 1 St. working dimensions: 3200x2000x200 mm Motor output: 12 kW Control: Beckhoff CNC Number of axles: 5 St. Masterwood Project 385 CNC-Bearbeitungszentrum --------------------------------------------- 5-Achs CNC-Bearbeitungszentrum in Auslegerbauweise (dadurch sehr große PLatten auflegbar) für Innenausbau, Plattenbearbeitungen aller Art. Kurze Zusammenfassung: --------------------------------------------- Verfahrwege X = 3950 mm, Y = 2145 mm, Z = 555 mm Arbeitsbereich: X = 3200 mm, Y = 2000 mm, Z = 200 mm 1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme 1 Stk. fest installierter Bohrkopf mit 19 Spindeln mit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtung mit 6 einzeln abrufbaren Vertikalbohrspin ...

: 32 bore stroke: 125 mm Short spindle: MK 3 throat: 210 mm Machine table - usable table surface: 390x390 mm table load: 65 kg spindle turning speed range: 150-2.500 UpM Power requirement: 16 A total power requirement: 1,5 kW Overall size: 750x450x1745 mm weight of the machine ca.: 187 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 25 mm pre-bending: 20 mm upper roll diameter: 390 mm lower roll diameter: 360 mm side roll diameter: 300 mm total power requirement: 18,5 kW weight of the machine ca.: 17.100 kg Machine dimensions approx.: 5800x2100x2000 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

Table length: 1250 mm Table width: 600 mm Longitudinal X: 1040 mm Cross Y: 600 mm Vertical Z: 500 mm Positions ATC: 30   Distance between uprights: 0 mm CNC Brand: Heidenhain CNC Model: iTnc 530 MACH-id   3989 MAKE       Deckel Maho TYPE         DMC 104 V Linear YEAR        2007 SPECIFICATIONS X - Travel    1040 mm Y - Travel      600 mm Z - Travel      500 mm bed / plano / portal / moving column    Portal Controll     iTNC 530 Table Length x Width   1250 x 600 mm Table load in kG   800 Kg Spindle Taper    Sk 40 kW power on spindle   30 kW Spindle speeds / ranges    12000 Rpm ATC tool changer   30 Coolant true spindle / Bar    10 Bar Number off  ...

Capacity: 35 t Folding length: 1200 mm CNC Brand: Delem CNC Model: M - 51 MACH-id   3969 MAKE        Baykal TYPE          APH YEAR         20.. SPECIFICATIONS Controll   Delem M-51 Pressbrake / Folding / Mech. / Hydr.   Pressbrake      Hydraulic / Mechanical     Hydraulic Bending length     1200 mm Distance between column   1070 mm Press force    35 Ton Throat    410 mm Stroke    60 mm Die height    470 mm Backgauge stroke X in mm500 mmNumber off controlled axis3Power4 kWDIMENSIONSLength1250 mmWidth1270 mmHeight2150 mmBaykal CNC Pressbrake

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400 V weight: 395 kg Overall size: 900x600x1100 mm Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 bar : 510 l/min. : 390 l/min. turning speeds: 1240 U/min container volume: 90 l power capacity: 3 kW voltage: 400 V weight: 80 kg dimensions: 1100x495x895 mm - Mobile piston compressor with horizontal tank - Compressed air tank equipped with safety valve, container pressure gauge and condensate drain valve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Environmental technology Kreisel Krauschwitz - Rotary valve Product name: Rotary valve Manufacturer: Umwelttechnik Kreisel Krauschwitz Type: ANG 200-11-12 Z (RF47) Year of construction: 2006 Machine number: 61614 Condition: used Inlet opening: 200 x 200 mm Outlet opening: 200 x 200 mm Cell depth: 60 mm Cell width: 200 mm Cell wall: 8 mm Number of cells: 8 Engine: SEW-EURODRIVE Type: RF47 DT71D4/TF RPM: 1380/12 Power: 0.37 kW Voltage: 230/400 V Protection class: IP55 Machine size: 850mm x 300mm x 300mm (L x W x H) Transport dimensions: 1,200mm x 800mm x 450mm (L x W x H) on pallet Number of packaging units: 1 Weight: approx. 100 kg on disposable pallet The rotary valve was completely refurbished, checked and tested for function in our company. Price: 1.390,00 € (VB) plus VAT from location Grunow (Brandenburg) (Subject to changes and errors regar ...

bore capacity in steel (diameter): 30 mm x-travel: 250 mm y-travel: 350 mm z-axis: 350 mm table-size: 240 x 800 mm spindle turning speed - stepless: 115 - 1750 U/min spindle taper ISO: 40 upper slide-adjustment: 500 mm : 200 -700 mm head swivability: 2 x 45 ° distance spindle /table: 60 - 390 mm feed - longitudinal/cross: total power requirement: 1,5 kW weight of the machine ca.: 1050 kg dimensions of the machine ca.: 1,28 x 1,10 x 1,92 m Coolant System: Digital Read Out: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

digital readout for backgauge retractable backgauge Optional: upgrade to CNC control Cuttinglength: 3100 mm Max sheetthickness st 45: 20 mm Max sheetthickness inox: 15 mm Passage between uprights: 3400 mm Depht of throat: 300 mm Strokes/min: 7 > 30 str/min Backgauge: 1000 mm Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 30 kW Length: 3400 mm Depht: 3900 mm Height: 2800 mm Weight: 22,3 ton

Turning diameter: 770 mm Turning length: 2000 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 MACH-id   3976 MAKE       DOOSAN TYPE         PUMA 400 LMC YEAR        2008 SPECIFICATIONS Swing over bed Ø   770 mm Control     FANUC 21 Swing over cross slide   590 mm Distance between centres   2000 mm Spindle bore   166 mm Spindle speeds / ranges    1500 Rpm Power    30 Kw DIMENSIONS Length   5500 mm Width     2200 mm Height    2400 mm- C Axis 0.001 Gr- Live tooling 11 kW- Large package jaws- Optional 10 set live tooling- SMW Autoblock steady rest- Chip conveyor- Tool eye- New EUR 240.000 ( incl. all options)

range L-W-H: 1980x510x1860 mm weight: 195 kg : 15 St. weight max. in kg: 700 kg Professional workbench / tool trolley Internal dimensions of the top left 3 drawers 395 x 395 x 65 mm. Internal dimensions of the middle 3 drawers 815 x 395 x 65 mm. Internal dimensions of the top right 3 drawers 395 x 395 x 65 mm. Internal dimensions of the left 4th drawer 395 x 395 x 140 mm. Inner dimensions of the middle 4th drawer 815 x 395 x 140 mm. Internal dimensions of the right 4th drawer 395 x 395 x 140 mm. Internal dimensions of the left 5th drawer 395 x 395 x 220 mm. Inner dimensions of the middle 5th drawer 815 x 395 x 220 mm. Internal dimensions of the right 5th drawer 395 x 395 x 220 mm. Dimensions of the wheels 150 x 40 mm. Solid wood panel thickness 40 mm. Packaging dimensions 189 x 55 x 80 cm. 4 x 150 mm swivel castor 2x with brake. 2 x robust solid stainless steel handle. 1 x central lockin ...

pressure: 2,5 kN stroke: 45 mm throat: 90 mm Working height from to: 80 - 220 mm table surface area: 120 x 60 mm weight of the machine ca.: 22 Kg dimensions: 160 x 230 x 390 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 265 mm bore stroke: 160 mm turning speeds: 280 - 1975 U/min : 390 x 400 mm distance drilling head - clamping area: 745 mm total power requirement: 1,1 / 400 kW / Volt weight of the machine ca.: 0,230 t dimensions: 0,9 x 0,5 x 1,4 m Table Drilling Machine with: variable feed Tapping function. depth display Coolant system Belt-drive spindle protection machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 130 x 80 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: square: 85 mm capacity 60 degrees: flat: 90 x 80 mm clamping range: 130 mm turning speeds: 30 / 60 U/min dimensions of saw-blade: 350 x 32 x 2,5 mm total power requirement: 1,1 / 2,2 kW weight of the machine ca.: 0,22 t dimensions of the machine ca.: 1200 x 860 x 900 m Special price: instead of 3997, -EUR now 3399, -EUR Manual miter saw for miter cuts from 45 ° right to 45 ° left, with high sawing performance. Made of robust cast iron, practical and safe for every cut. Basic equipment: externally adjustable coupling Locking device with a vice Can be moved on a prismatic guide with an adjustable bar Fixed clamps of the vice with axial adjustment for clamping the workpiece in the immediate vicinity ...

Center height: 350 mm Center distance: 4000 mm Spindle bore: 77 mm MACH-id   3980 MAKE      TOS TRENS TYPE        SN 710 YEAR       2002 SPECIFICATIONS Swing over bed Ø   720 mm Swing over cross slide   430 mm Swing in the gap Ø   960 mm Distance between centres   4000 mm Spindle bore    77 mm Spindle speeds / ranges   1600 Rpm Bed width     450 mm Power     7.5 Kw DIMENSIONS Length    6015 mm Width      1275 mm Height    1635 mm

pressure: 160 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 250 mm ram stroke speed: 90 mm/sec return speed: 80 mm/sec work speed: 7,5 mm/sec work stroke: 160 mm dayligth: 395 mm oil volume: 200 ltr. table height: 900 mm back stop - adjustable: 800 mm voltage: 400 Volt total power requirement: 11,0 kW weight: 7.524 kg range L-W-H: 4250x1900x2550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t chamfer lenght: 3760 mm distance between columns: 3250 mm column arm: 250 mm ram stroke speed: 90 mm/sec return speed: 6,1 mm/sec work speed: 60 mm/min work stroke: 160 mm dayligth: 395 mm oil volume: 200 ltr. table height: 900 mm voltage: 400 Volt weight: 8.514 kg range L-W-H: 4910x1900x2550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1200 kg. table turning speeds: 80 - 1600 mm/min. roll diameter: 200 x 50 mm workpiece diameter: 20 - 800 mm range L-W-H: 520 x 470 x 390 mm Antrieb range L-W-H: dito mm Mitläufer volt: 230 V / 50 Hz weight: 56 kg Description: - Device for rotating and positioning Containers and cylindrical workpieces. - Unit in solid steel construction with polyurethane-coated metal rollers. - Precise speed adjustment by Frequency converter. - Foot switch for start / stop, 4-step operation. - Switch for right / left rotation. - Rotary knob for infinitely adjustable rotation speed. - Selector switch for rapid traverse / normal operation. - Switch with indicator light for operational readiness. - HF protected Scope of delivery: - 1 drive unit with control (integrated) - 1 follower The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25,0 mm throat: 255 mm bore stroke: 120 mm morse taper: 3 MK turning speeds: 105 - 2900 U/min voltage: 400 / 50 Hz V table:: 395 x 420 mm column diameter: 100 mm weight: 148 kg Furnishing : - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Digital drilling depth display - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table length: 1300 mm Table width: 560 mm Longitudinal X: 1200 mm Cross Y: 600 mm Vertical Z: 650 mm Positions ATC: 24   Positions APC: 0   CNC Brand: Fanuc CNC Model: O-M MACH-id   397 MAKE     Feeler Taiwan TYPE       FV 1200 A YEAR     1999 . 03 SPECIFICATIONS X - Travel    1200 mm Y - Travel     600 mm Z - Travel      650 mm bed / plano / portal / moving column    Vertical maching centre Controll    FANUC O-M Table Length x Width    1300 x 560 mm Table load in kG    1000 Kg Spindle Taper    BT 50 kW power on spindle    11 kW Spindle speeds / ranges    6000 Rpm ATC tool changer    24 Coolant true spindle / Bar    10 Bar Number off controlled axis    3 ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 160 to : 400 mm : 1000x680 mm : 765 mm : 10-20 mm/s : 250 mm/s : 1000x750 mm : 22 kW : 2400 mm : 1525 mm : 3900 mm : 10500 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 200 to : 7 mm : 1350 mm : 800 mm : 250 mm : 18 - 180 mm : 35 - 50 1/min : 900x570 mm : 8 : 110 mm : 410 mm : 820 mm : 22 kW : 1500 mm : 2633 mm : 3950 mm : 20000 kg touch screen control semi automatic stroke adjustment die space adjustment with mechanical display decimal resolution adjustable motor speed overload protector automatic cams reset double bolster plate oil circular lubrication dynamic brake Automation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - Semi automatic or automatic stroke adjustment - die safety control - alarms view - overload protector The data for this ad was created with ModulMWS - the software so ...

chamber volume: 80 liter useable volume: -- liter friction: -- motor drive power: 390 kW Condition: used - overhauled - with warranty Specification: Internal mixer used - Capacity: about 80 lts - Rotors model: tangential type with 3 wings - Command gearbox: semi-unidrive type - Max speed rotors: about 60 rpm - Closing system: drop-door type - Hydraulic unit for drop-door system - Pneumatic hopper for loading material - DC engine: 390 kW - 1500 rpm - 440 V - New electric cabinet with driving system for variable speed of rotors - N.1 new electric panel - New on board electric system on the machine - Safety devices in according to standard rules - Manual of use and maintenance in English language and CE marking - Reconditioned and guaranteed machine in according to standard rules - Warranty: 1 year The data for this ad was created with ModulMWS - the software solution  ...

Center height: 500 mm Center distance: 4500 mm Spindle bore: 160 mm MACH-id  3942 MAKE       EST TICINO Italia TYPE         ET BM 520 YEAR        SPECIFICATIONS Swing over bed Ø  1040 mm Swing over cross slide   710 mm Swing in the gap Ø   1780 mm Distance between centres   3000 / 4500 mm Work piece weight    8500 kg Spindle bore    160 mm Spindle speeds / ranges    900 Rpm Bed width    600 mm Power    35 hP Kw DIMENSIONS Length   5500 mm Width    2300 mm Height    2300 mm  

Brush diameter: 200 mm Brush width: 90 mm power capacity: 1,0 kW connected load frequency: 400 V speeds: 1450 / 2850 U/min total power requirement: 1,0 kW weight of the machine ca.: 25 Kg dimensions: 390 x 310 x 390 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1290 mm y-travel: 280 mm z-travel: 400 mm spindle taper ISO: 50 spindle turning speed range: 60 - 1750 U/min transmission ratio: 12 distance spindle /table: 0 - 400 mm table load: 450 kg table-size: 360 x 1320 mm feeds X-axis: 22 - 420 mm/U feeds Y-axis: 22 - 393 mm/U feeds Z-axis: 10 - 160 mm/U rapid traverse X-axis: 1290 mm/min rapid motion - y-axis: 1205 mm/min rapid traverse Z-axis: 1200 mm/min swivelling of milling head (both sides): 360 total power requirement: 8 kW weight of the machine ca.: 2220 t dimensions of the machine ca.: 3340 x 2460 x 1920 m Universal - Milling Head: HURON The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 300 mm stroke: 8-112 mm table surface area: 700x550 mm ram surface: 390x300 mm hole in the table: Ø 260 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 1500x1900x2800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mm x-travel: 6400 mm y-travel: 3900 mm z-travel: 1450 mm turning speeds: 500 U/min power capacity: 52 kW chip conveyor: digital readout: Plate area: 12500x5500 mm Plate area: 7000x3500 mm Plate area: 93 m² total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m florplates are optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table length: 3900 mm Table width: 1500 mm Longitudinal X: 3800 mm Cross Y: 1500 mm Vertical Z: 650 mm Positions ATC: 52   Distance between uprights: 2210 mm CNC Brand: Heidenhain CNC Model: TNC 426 MAKE   AXA Germany TYPE    UPFZ 40 YEAR   2001 SPECIFICATIONS X - Travel    3800 mm Y- Travel     1500 mm Z - Travel     650 mm bed / plano / portal / moving column   Portal milling Controll    HeidenHain TNC 426 Table Length x Width    3900 x 1500 mm Spindle Taper    Sk 40 kW power on spindle  20 / 100 % or 30 / 40 % kW Spindle speeds / ranges  100 - 15000 Rpm ATC tool changer   52 Number off controlled axis   5 Axis CNC Automatic milling head / Gr.    2.5 Gr .Distance between columns    2210 mm DI ...

Rounds: 105 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   MACH-id      3629 MAKE           PBT Swiss TYPE            35 YEAR          2004 SPECIFICATIONS Hydraulic / Mechanical    Hydraulic    Horizontal / Vertical / or   H + V     Horizontal Shaft Diameter ø  105 mm Roll diamter ø    Stroke = 390 mm Shaft length    Adj = 360 - 1100 mm Working speed M/Min.    1 - 16 M/Min Resistance moment Cm 3  Torq = 3000 Nm Cm3 Capacity IPN   IPE 160 x R = 1000 mm Capacity Tube walltickness x Ø114 x R = 300 mm Power   11 DIMENSIONS Length    1850 mm Width     1600 mm Height  &nbs ...

bore capacity in steel (diameter): 65 mm throat: 390 mm bore stroke: 250 mm spindle taper MT: 5 table-size: 880x670 mm spindle turning speed - stepless: 40-800 U/min weight of the machine ca.: 1.2 t www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 395 mm length: 2960 mm output height: 130 mm efective widths: 385 mm Pole center: 400 mm drive motor: Drehstrom The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity round maximum diameter: 810 mm Angle degrees maximum: 480 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id   3542 MERK  Knuth Germany TYPE  HB 810 L YEAR   2008 SPECIFICATIES  Circel / Band zaagVol / Half automaat  Bandsaw Verstek zagen links en rechts ˚Graden  ANgle cutting 45 Gr .Capaciteit bij 90 ˚ Graden rond Ø  810 mm Capaciteit bij 90 ˚ Graden plat  810 x 850 mm Capaciteit bij 45 ˚ Graden rond Ø  810 mm Capaciteit bij 45 ˚ Graden plat  480 x 850 mm Zaag blad / band afmeting  8200 x 41 x 1,3 mm Zaag snelheid M/Min. 20 - 100 M/min AFMETINGEN Lengte  3900 mm Breedte  1200 mm Hoogte 3350 mm  

max. wheel diameter: 400 mm gear width: 500 mm max. module: 15 min. module: 0,5 total power requirement: 2,5 kW weight of the machine ca.: 2 t dimensions of the machine ca.: m H O E F L E R (Germany) CNC Controlled 4 Axis Inspection Centre for Gears Model EMZ 400 Year 1988 Serial No. 067 047 ____________________________________________________ Working range: Min./max. gear Ø / base circle Ø 0 – 400 / 390 mm Module range 0.5 – 15 Gear width, max. 500 mm Travel of measuring head, approx. +/- 180 mm Helix angle 0 – 60 ° Max. weight of workpiece, approx. 250 kg Distance between centres, approx. 1,000 mm Distance between centre and body of counter steady 205 mm Table Ø, approx. 290 mm Plotter diagram scales 50 / 1 ...

thickness of jaw: 160 mm : 50 mm clamping width: 125 mm clamping capacity: / t weight: 40 kg dimensions of the machine ca.: 390 x 285 x 165 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Included in delivery are: 01x Visible storage box, II choice Material color: blue Material: Metal External dimensions: approx. 395x320x120 mm(LxWxH) Internal dimensions: approx. 390x300 mm(LxW) Usable height in stack: approx. 100 mm Net weight: approx. 1,700 kg Technical data for the visible storage box: Manufacturer: SSI Schäfer - In the middle of the box is a hole slot for possible separators. Use: - The visible storage boxes are particularly suitable due to their robustness for the workshop or transport. - The metal visible storage boxes are compatible with identical construction Plastic boxes and can be stacked with them without any problems. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place  ...

spindle diameter: 160 mm x-travel: 6400 mm y-travel: 3900 mm z-travel: 1450 mm turning speeds: 500 U/min power capacity: 52 kW chip conveyor: digital readout: Plate area: 12000x6000 mm Plate area: 7000x3500 mm Plate area: 93 m² total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m florplates are optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1400 mm turning diameter over slide rest: 1000 mm turning length: 11280 mm faceplate: 1250 mm workpiece weight in steadies max.: 20000 kg steady: 395 mm steady: 620 mm workpiece weight: 16000 kg total power requirement: 40 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 2.800 mm plate depth: 2.800 mm plate height: 390 mm weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.