mechanical trim press used for sale

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x motors -Motor type: -Power: 0.23 kW -Voltage: volts -Frequency: Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1000/420/H655 mm -Weight: 140 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x motors -Motor type: -Power: 0.23 kW -Voltage: volts -Frequency: Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1020/400/H700 mm -Weight: 110 kg

Trimming machine Make: VITAP Type: RC 92 New machine Technical data: - 2 high frequency motors HP.0,75 (Kw 0.55) each. 12000 RPM, in vertical opposite position with inverter; - 2 cutter heads with cutters one knife straight 15° the other radius 3mm; - CE standards Options (for a surcharge): - Couple of cutters (without knives) ? 274,00 - Set 8 knives 15 degrees angle and radius 2 mms. ? 122,00 - Set 8 knives 15 degrees angle and radius 3 mms. ? 122,00 - Pneumatic lifting of the upper motor ? 474,00 - Optional for panels max. high 120 mms ? 227,00

IRION trimming circular saw without cross-cut saw system Saw Blade Fixe ( Electrically Singable ) Cut length 6200 mm Cutting height 150mm Attention: Saw blade electrically "singable" Ready to ship!

diameter range 5-12 mm shaft length under head 10-130 mm output - pieces/min 120

diameter range M8 shaft length under head 6-80 mm output pieces/min 200

diameter range 2,2-8 mm shaft length under head 6-40 mm output pieces/min 250

diameter range 2,6-8 mm shaft length under head 6-50 mm output pieces/min 260

Serial number: 481 Center height: 100 mm Measuring range: up to approx. 3000 mm Panel dimensions: 3750 x 150 x 300 mm Auction-ID: A7-49089-147

plate thickness: 4 mm blade length: 150 mm cutting angle: 30-120 ° Table dimensions: 1000x650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cordless grass/shrub shears are an irreplaceable tool for garden maintenance. Refinishing lawn edges has never been easier. Thanks to the use of a 1300 mAh lithium-ion battery, the shears are extremely handy and the cable does not get in the way of the user. Auction-ID: A7-49495-263

Cordless grass/shrub shears are an irreplaceable tool for garden maintenance. Refinishing lawn edges has never been easier. Thanks to the use of a 1300 mAh lithium-ion battery, the shears are extremely handy and the cable does not get in the way of the user. Auction-ID: A7-49495-163

TRIMOS Vertical measuring column with metrology accessories, professional equipment for dimensional control in the workshop or in quality service. TRIMOS devices are known for their accuracy and robustness in industrial applications. This column allows you to: Precise height measurement Tolerance control Inspection of machined parts The package includes several accessories (brackets, articulated arms, measuring tips), offering flexible and immediate use for different control configurations. Ideal equipment for: CNC machine shops Precision mechanics Quality Control Industrial maintenance Mechanical subcontracting Auction-ID: A1-48554-11

Cordless grass/shrub shears are an irreplaceable tool for garden maintenance. Refinishing lawn edges has never been easier. Thanks to the use of a 1300 mAh lithium-ion battery, the shears are extremely handy and the cable does not get in the way of the user. Auction-ID: A7-49495-63

Uniloy Milacron RTM 4 Uniloy Trimmer (2014) Auction-ID: A1-48805-105

TRIMOS V4-700 digital measuring column, professional metrology equipment for high-precision dimensional inspection. The TRIMOS V4 series is widely used in CNC machine shops, quality departments and metrology rooms for the fast and accurate inspection of mechanical parts. With its built-in digital display and robust construction, this machine allows: Accurate height measurement Dimension control Diameter and depth measurements with matching accessories Quality control in production Equipment particularly sought after by: CNC machine shops Precision mechanics Bar turning Metrology Laboratories Industrial Quality Services Auction-ID: A1-48554-225

Type: Hedge Trimmer Manufacturer: STIHL Auction-ID: A1-49609-28

Contents of the case •1 x Ratchet wrench 1/4\" •1 x Screwdriver handle 1/4\" •21x Bit sockets 1/4\" •Slot: 4.5-5-7 mm •PH: 1, 2, 3 •PZ: 1, 2, 3 •Allen key: 3, 4, 5, 6, 7, 8 mm •Torx: 10, 15, 20, 25, 30, 40 •13 x Sockets 1/4\": 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm •3 x Allen Wrenches: 1.5mm, 2mm, 2.5mm •1 x Universal Joint 1/4\" •1 x Extension 1/4\" 50 mm •1 x Extension 1/4\" 100 mm •1 x Flexible extension 1/4\" 150 mm •1 x T-handle 1/4\" •1 x Bit Adapter Trimann, 1/4'', Socket set, case, piece, Tool set, Various Auction-ID: A1-40897-200

Clipset Automotive 630dlg. The numbers of the most commonly used clips are larger Box with handle: 3 layer with 16 compartment sealing clips Dimensions: 17 x 17 x 18cm. Weight: 910gr. Auction-ID: A1-40897-168

TRIMANN- Torque Wrench Set - 32-piece Torque Wrench Set 1/4\" in sturdy case - with 3/8\" adapter Auction-ID: A1-40897-151

Model LYCOS E/500 H EAN Code 4008423913521 Model No. 41AE5HJ-650 Motor type 500 W Working width 55 cm Blade distance 18 mm Blade shape Weight (net) (kg) 2.8 kg Auction-ID: A1-40897-62

TRIME - X-TS, year of manufacture 2019 - Internal No. 910937 Minimum operating costs, maximum self-sufficiency: As a solar hybrid light tower, the Trime X-TS is extremely fuel-efficient and at the same time offers maximum security of supply and flexibility in every situation. The batteries are primarily supplied by the solar panels, but can be charged at any time by the integrated diesel engine or a 230V grid connection if required. LED modules: 4 x 150 W LEDs (= consumption 600 W) Light output: 61,000 lumens Illuminated area: up to 2,000 m² Drive type: Hybrid (solar, battery, mains connection and diesel engine) Solar power: 330 Wp Diesel Engine: Yanmar L70 Generator: Linz SP10M Generator power: 4.2 kVA (230V) Fuel tank capacity: 42 litres Transport dimensions (L x W x H): 1.18 x 1.34 x 2.67 m Dimensions of set-up/footprint: 2.35 x 2.54 m Max. mast height: 8.30 m Forklift pockets  ...

Description: 10\" WiFi & Bluetooth touch screen for Caterpillar machines CATERPILLAR / TRIMBLE TD520-LW 10\" TOUCH DISPLAY WIFI & BLUETOOTH TOUCH SCREEN New Auction-ID: A1-50002-17

Powertrim 300-H Professional Edger – Honda GX120 – 25 cm Specifications: Brand: Powertrim Type: 300-H Engine: Honda GX120 Engine type: 1-cylinder air-cooled 4-stroke petrol engine Displacement: approx. 118 cm³ Engine power: approx. 4 hp Start: manual pull starter Fuel tank: approx. 2.7 litres Blade length: approx. 25 cm Working depth: adjustable in 10 positions Maximum cutting depth: approx. 10 cm Blade drive: mechanical via V-belt Number of wheels: 4 Wheel diameter: approx. 175 mm / 7 inch Own weight: approx. 30 kg Features: Honda GX120 petrol engine Oil Level Protection Vertical rotating cutting disc Manually switchable blade drive on and off V-belt drive with protective cover Working depth adjustment in 10 positions Four-wheel guide Adjustable front wheel construction Steel frame construction Long control boom with control from the handles Pa ...

Hedge trimmer HHE150 P Weight class: 1 - 8 t Weight: 110 KG (with holder) Weight: 83kg (without pick-up) Number of knives: 19 pieces Cutting Length: 1500mm Max. cutting diameter: 40 mm Operating pressure: 180 bar Oil flow: 20-65l/min Scope of delivery: Hedge trimmer CE Declaration of Conformity Operating instructions Auction-ID: A1-50077-820

Hedge trimmer HHE120 P Weight class: 1 - 8 t Weight: 94 KG (with pick-up) Weight: 67kg (without pick-up) Number of knives: 15 pieces Cutting length: 1200mm Max. cutting diameter: 40 mm Operating pressure: 180 bar Oil flow: 20-65l/min Scope of delivery: Hedge trimmer CE Declaration of Conformity Operating instructions Auction-ID: A1-50077-810

unused; in the box; manual; Engine: 2-stroke; Displacement: 25.4 cc; Rated power speed: 7000 rpm; Fuel tank volume: 450 ml; Bar length: 78 cm; Teeth gap 28mm; 8351 Auction-ID: A1-50091-108

unused; in the box; manual; Engine: 2-stroke; Displacement: 25.4 cc; Rated power speed: 7000 rpm; Fuel tank volume: 450 ml; Bar length: 78 cm; Teeth gap 28mm; 8351 Auction-ID: A1-50091-105

Three Knife Trimmer with automatic infeed belt for Inline or Offline production Dreimesserautomat / Three Knife Trimmer Wohlenberg 44 FM 50 Baujahr / Year 1988 - Serial-No. 3296-013 Format / Size max.  315 x 440mm  Thicknes max. 100mm Speed max. 3000 cycles per hour Automatischer Einlauf / Specification automatic feeding Bandauslage / Belt delivery

Dreimesserautomat von Heidelberg in einem guten Zustand. Three Knife Trimmer of Heidelberg in good condition. Dreimesserautomat / Three Knife Trimmer Heidelberg Eurotrim ET1000  Baujahr / Year 2010 - Serial-No. FM.EBAA-00047 Mechanische Leistung / Mechanical performance    max. 1,000 cycles/h Buchblock Breite unbeschnitten / Book Block width untrimmed 110 - 345mm  Buchblock Höhe unbeschnitten / Book Block high untrimmed 110 - 480mm  Buchblock Breite beschnitten / Book Block width trimmed 90 - 330mm  Buchblock Höhe beschnitten / Book Block high trimmed 100 - 470mm  Höhe des zu schneidenden Materials / Height of material to be cut 2 mm–60 mm Druckluftversorgung / Compressed air supply 6bar Stromversorgung / Power supply 400 V, 50 Hz, 3 phases + N + PE / 20 A / 8.0 kVA Maschinenabmessung /Dimensions (LxWxH) 3130 x 960 x 1620mm Maschi ...

Three Knife Trimmer Kolbus HD 140.P with Copilot and automatic infeed Dreimeserautoat / Three Knife Trimmer Kolbus HD 140 P Baujahr / Year 2000 - Serial-No. 347 Format / Size max 305 x 420mm Formatbereich beschnitten / Size (trimmed) min. 100 x 100mm - max. 300 x 400mm Buchblock Stärke / Book block thickness min. 2mm - max. 80mm Stapelhöhe / Feeding height 80mm Mechanische Laufleistung / Speed max. 3.900 c/h Rechtseinfuhr / Infeed from right Equipment: Copilot automatic infeed automatical speed Regulation automatic lock of knife adjustment and pressing block automatic setting of bookblock pressure

The products have not been tested for functionality. They may have scratches, dents, incompleteness or general signs of use. Visit us on the day of the inspection to get an accurate picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-50209-771

Cordless grass/shrub shears are an irreplaceable tool for garden maintenance. Trimming lawn edges has never been easier. Thanks to the use of a 1300 mAh lithium-ion battery, the shears are extremely handy and the cable does not get in the way of the user. Auction-ID: A7-50066-263

Cordless grass/shrub shears are an irreplaceable tool for garden maintenance. Trimming lawn edges has never been easier. Thanks to the use of a 1300 mAh lithium-ion battery, the shears are extremely handy and the cable does not get in the way of the user. Auction-ID: A7-50066-63

The products have not been tested for functionality. Therefore, there is a possibility that individual items may not work. The products may have scratches, dents, incomplete, or general signs of use. Visit us on the day of the inspection to get an accurate picture of the condition and reason for return. Shipping is also possible. If you would like shipping, please send an email to: info@qplaza.de. For more information, please contact us. Auction-ID: A1-50209-1180

Cordless grass/shrub shears are an irreplaceable tool for garden maintenance. Trimming lawn edges has never been easier. Thanks to the use of a 1300 mAh lithium-ion battery, the shears are extremely handy and the cable does not get in the way of the user. Auction-ID: A7-50065-63

Cordless grass/shrub shears are an irreplaceable tool for garden maintenance. Trimming lawn edges has never been easier. Thanks to the use of a 1300 mAh lithium-ion battery, the shears are extremely handy and the cable does not get in the way of the user. Auction-ID: A7-50065-163

Cordless grass/shrub shears are an irreplaceable tool for garden maintenance. Trimming lawn edges has never been easier. Thanks to the use of a 1300 mAh lithium-ion battery, the shears are extremely handy and the cable does not get in the way of the user. Auction-ID: A7-50066-163

Cordless grass/shrub shears are an irreplaceable tool for garden maintenance. Trimming lawn edges has never been easier. Thanks to the use of a 1300 mAh lithium-ion battery, the shears are extremely handy and the cable does not get in the way of the user. Auction-ID: A7-50065-263

Complete Trimble TMX system RTK (0-2 cm accuracy) Equipped with: Trimble TMX-2050 display FMX+ app Sierra RV45 modem NAV III controller AG25 Antenna Set has been fully checked and is ready for use Auction-ID: A1-47390-274

Trimble GFX-750 display NAV-900 Receiver with Sierra modem The set is equipped with the following releases RTK (0-2CM accurate) CAN (can communicate with a factory-prepared tractor) ISOBUS VT (showing your isobus machine on the display) ISOBUS Task controller (for switching ISOBUS controlled machine on/off) VRA (For location-specific more or less product giving controlled via ISOBUS) Set works well. Auction-ID: A1-47390-278

Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum

; in order

Table 1750 x 920 mm, fixed stroke 101 mm, see pictures and description,; All right

(side-front moving table) Nominal force: 1000 ton Slide stroke: 400 mm Continuous slide strokes per 1 min: 20 Single slide strokes per 1 min: 16 Shut height: 1060 mm Slide adjustment: 320 mm Table dimensions: 3150x1800 mm Slide dim., front-back: 1700 mm Window H 1500 x W 1900 mm Hydro pneumatic cushion in table clamping force at P = 0.42 MPa (P = 4.2 kg / cm2), kN 2000 ejection force P = 0.45 MPa (P = 4.5 kg / cm2), kN 200 Main-drive electric motor power: 132 kW DIMENSIONS: 5150x4700x11400 H floor7830 mm WEIGHT:193 ton

Capacity , ton: 800 Stroke, mm: 320 Strokes/min: 20 Shut height, mm: 900 Bed to ram adjustment stroke, mm: 320 Bed dimensions, mm: 2500x1600 Main drive motor power, kW: 75 Overall dimensions, mm: 4220x3500x8356 Weight, ton: 96,6

Supply system for sliding ring seals / pressure tank 12L Manufacturer: Fluiten Material: Stainless steel (1.4301) Built: 2000 Volume: 12 L Pressure (max): 16 bar Temperature (max): 99 °C Height: 430 mm (without gauge) Diameter: 219 mm incl. thermometer, gauge and sight glass Condition: new and unused Connections: see drawing Item can be inspected at any time in 76694 Forest by arrangement.

Qty. 1 Second-hand press for production of Aluminium pots and discs Mfc.: SITI Built: 2005 Renewed in by experts Duration: 3-4 months Force: 4000 Ton Production of Aluminium discs & induction & normal pots Pots height: 120 / 140 mm The press will be overhauled and revamped and sold as specified below: New Piston Grinding of cylinder New Flange Table modification New pumps New gaskets etc . New electric and electronical parts New program

BENELLI PEZM/800/600/4P 800T mechanical press was built in 1971 in Italy. The machine is designed for the precision cold working of metals. It enables the performance of demanding operations such as blanking, stamping and the forming of large-size components. Its high press force of 800 tonnes in combination with a wide range of machining capabilities makes it an excellent choice for industrial plants specialising in the mass production of parts for the automotive and machinery industries. The BENELLI PEZM/800/600/4P features a drive system based on a flywheel and an eccentric gearbox, which converts the rotational movement of the shaft into the reciprocating movement of the slider. This solution ensures smooth and repeatable operation throughout successive production cycles. Tools are positioned on the work table with centring pins and then fixed to the table and the slider with bolt ...

MOSSINI PDM/4B 1000T mechanical press was built in 2009 in Italy by Mossini SpA. The machine is designed for the precision blanking, stamping and forming of large-size components. The combination of high press force and wide machining capabilities makes the press ideal for the mass production of components used, among others, in the automotive and machinery industries. The MOSSINI PDM/4B 1000 is distinguished by its high press force of 1000 tonnes. Its drive system is based on a flywheel and an eccentric gearbox, which cooperate with four connecting rods. This solution enables uniform torque transmission and smooth control of the slider movement. Tools are positioned on the work table with centring pins and fixed with clamps, whilst they are fixed to the slider with bolts. The work table can be moved outside the press’s work area to carry out the assembly or disassembly of tooling,  ...