mechanical press used for sale

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 09-BE001521-05 Year of construction: 10/2005 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 pmax: 100 bar Drive power: 2.2 kW, 85.1 A Dimensions: 1210 x 1605 x 2200 mm Weight : 860 kg Bale volume: 1m³

Press-fit device for ceramic pins in rotor shafts Principle: The ceramic pins are fed to a test station via a pneumatic hose by means of a vibrating conveying bowl, where the position of any single-sided bore is checked. This is done with an optical sensor. Wrongly positioned parts are conveyed through a pneumatic slide into a collection container. Pins that are correctly positioned are fed through another pneumatic hose to the separator of the press-fit tool. The actual press-fit process is also carried out pneumatically with a roller bearing guided punch. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too easily into the shaft. With a pressure p2, which can also be adjusted manually, the pin is then pressed into the rotor shaft at full stop. A 5,000 N preloaded disc spring package prevents excessive force from being exerted on  ...

Papildoma informacija — Naujas preskonteineris Ludden & Mennekes SVS11+KEV 1. Stationary Screw Compactor L&M SVS 11 Almost unused stationary (~ 1 month) screw compactor designed for filling compaction containers and/or other containers. The machine is built from a robust welded steel structure with continuously welded seams. Its low-maintenance screw compaction system is suitable for continuous feeding, and the compaction chamber does not require periodic cleaning. Main technical specifications Overall length 2,480 mm Overall width 1,660 mm Overall weight 2,300 kg Loading height 1,350 mm Feed opening 1,375 × 1,490 mm Screw diameter 750 / 500 mm Screw speed 17 rpm Drive power 11 kW Residual-current device / FL plug Type B / 300 mA 2. Hydraulic Container Coupling / Decoupling System Hydraulically operated coupling and decoupling system with forward and reverse move ...

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100/21 Machine no.: 1286.1541.1324 Year of construction: 12/1986 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1210 x 1605 x 2200 mm Weight : 780 kg Bale volume: 1m³ Machine weight: 730 kg

Manufacturer: YANCHENG Model: XYJ-3/100 Year of Manufacture: 2016 Type of Machine: stamping machine press Capacity: 100T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 2 - Width 2 - Height 1.6 (cm or m) - Weight 1000 kg - Power 11 (Kw or KVA, ) - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: YANCHENG Model: XYJ-3/100 Year of Manufacture: 2017 Type of Machine: stamping machine press Capacity: 100T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 2 - Width 2 - Height 1.6 (cm or m) - Weight 1000 kg - Power 11 (Kw or KVA, ) - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2016 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 08-BE003665-07 Year of construction: 08/2007 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Weight : 860 kg Bale volume: 1m³

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2017 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2018 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2019 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2020 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100-? Machine No.: unknown Year of manufacture: unknown System: Rotating Waste Compactor The packing station captures, tears and compacts the product to be filled by means of a specially equipped steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Bale volume: 1m³ Weight: approx. 750 kg

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2021 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2022 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2023 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Five identical Farmet oil presses are offered. Max. throughput: 24kg seed/h, main drive: 4kW, machine dimensions X/Y/Z: 1700mm/1620mm/1530mm, weight: 235kg. Inspection by appointment is possible.

pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 595 x 410 mm ram adjustment: 70 mm no. of strokes: 150 Hub/min table adjustable in height: 240 mm total power requirement: 1,1 kW weight of the machine ca.: 1,45 t dimensions of machine L x W x H: 1,30 x 0,80 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Briquetting press 1000 kg/h approx. 55 kW Diameter 75 mm

Offer 22564 Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between uprights 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg - With: - Two-hand control panel with foot switch

It is a recontitioned Fortuna fully automatic bun roll press size 3 for sale. The machine head can be swivelled, switched off with active movement. The machine is in very good condition, fully functional and runs very smoothly. It has been repainted. The machine head of the machine is in very good condition, a new stainless steel cutting knife has been installed, no wear is visible. A new control box with new contactors has been installed. The machine has a reverse run button and an intervention protection. The weight range of the machine is 32gr. - 70gr. per piece of dough (30 pieces). If dough pieces are only pressed and cut, a higher weight range is possible. Connection 400 V, 1.6 kW, 16A-CEE plug, dimensions: 690 x 800 x 1470 cm (WxDxH). Incl. 3 x knitted plates (other knitted plates on request). A video can be sent on request. Price on request.

pressure: 100 t chamfer lenght: 2050 mm distance between columns: 1550 mm throat: 250 mm stroke: 200 mm adjustment of press crosshead: 200 mm stroke speed - idle stroke downwards: 105 mm/sec stroke speed - idle stroke upwards: 180 mm/sec stroke speed - under load: 9,5 mm/sec table width: 200 mm table height over floor: 900 mm dayligth: 280 - 480 mm back stop - adjustable: 3 - 729 mm control: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kW weight of the machine ca.: 10 t dimensions of machine L x W x H: 3,70 x 2,45 x 2,80 m Accessories: programmable back gauge, table extensions, various upper and lower dies segments The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 730x600 mm ram surface: 540x360 mm table height: 850 mm tool hole in ram: Ø40 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 2000x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 195 mm stroke: 8-78 mm no. of strokes: 76-190 Hub/min ram - range of adjustment: 60 mm table surface area: 650x380 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: BxTxH 1450x1220x2110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t throat: 200 mm stroke: 10-80 mm ram - range of adjustment: 60 mm no. of strokes: 120 Hub/min table surface area: 600x450 mm ram surface: 290x230 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-49790-1419

Auction-ID: A1-49790-1398

Hydraulic press manufactured in 2014. This WIS ATEVI Druckgeber ATeVi Heidel features a ram stroke of 800 mm and a closing force of 500 kN. It has a machine weight of 19,500 kg and includes a Siemens S7 control system. If you are looking to get high-quality hydraulic pressing capabilities, consider the WIS ATEVI Druckgeber ATeVi Heidel machine we have for sale. Contact us for further details.

For sale is a high-quality and fully equipped laboratory / compact pellet press from the renowned manufacturer Amandus Kahl (Type 14-175) including precise K-Tron dosing screw, Rittal control cabinet and extensive accessories/spare parts. The system is ideal for test setups, laboratory applications or smaller productions in the pharmaceutical, chemical or food industries as well as for special applications, as the parts in contact with the product are made of high-quality stainless steel. Technical data & equipment: Pellet mill Amandus Kahl: - Manufacturer: Amandus Kahl (Hamburg, Germany) - Type: Press 14-175 - Machine No.: 22374 - Year of construction: 2006 - Certification: CE - Drive motor: 3.0 kW (220–240 / 380–415 volts) - Speed: Infinitely variable up to 101 rpm - Die: Diameter 150 mm - Press rollers: 2 pieces K-Tron dosing screw (produ ...

Baler HSM 8 TE; good condition; cleaned and tested; Pressing force 80 KN; Bale size 650x505x500mm; with strapping. Baling press HSM 8 TE; good condition; cleaned and checked; pressing power 80 KN; bale size 650x505x500mm; with strapping tape.

TRUMPF 5130 B23 Year: 2021 Machine - C frame Press beam Spherical bearing of the press beam with press beam tilting On-Demand Servo Drive with 4-cylinder technology Distance measurement system (Y axis) with dynamic deflection compensation Hydraulic oil filling (life-long fill) Backgauge - Gauge fingers (two pieces) MACHINE OPTIONS Extension of the open height/stroke + 230 mm CNC-controlled wedge crowning 5-axis backgauge (X, Delta X, R, Z1, and Z2 axis) TRUMPF hydraulic upper tool clamp Keyboard and mouse Additional screen Shop floor programming TecZone Bend Tool Setup Optimizer (TSO) ACB Wireless (Automatically Controlled Bending) ACB Laser (Automatically Controlled Bending) Tool Indicator Part Indicator Front work area illumination Rear work area illumination Support bracket x 2 BendGuard Automatic

Including various accessories Auction-ID: A1-49790-1516

The WELGER SB 100 is a German baler for waste paper, foil and other materials and waste. Length of machine, without bale chute 3.380mm Width 1,120 mm Height 1,760 mm Table height 990 mm Table width 600 mm Press force 4.3 tons Time per working stroke 6.7 sec Capacity/throughput 0.75 t/h Bhm8ggch Bale size 600mm w x 375mm h x length 600-1200mm Binder Plastic Yarn Power supply: 400 V/5.5 kW Weight: 40-60 kg Machine weight: 1000 kg ATTENTION- BONUS! A second such machine for spare parts is EXTRA included.

Max. pressing force: 150t, bending length: 4050mm, backgauge: 750mm, control: Cybelec CNC 7200 P, weight: approx. 15t. Equipped with hydraulic tool clamping, crowning system, height-programmable backgauge, two control panels and two pneumatic bending aids. Including stand with various upper tools and dies as well as various special accessories manufactured in-house. Documentation available. An on-site inspection is possible.

Auction-ID: A1-49818-1398

Auction-ID: A1-49818-1419

3000 x 100 ton Regularly maintained by Bystronic with recent oil change. Modeva 10 graphic CNC X1, Y1,Y2, R1, Z1, Z2 New Fiessler light guards fitted 2021 Hydraulic top tool clamping Full set of 250 V30 R1 top tool including segmented sections

200 ton x 4000mm Y1 Y2 X R Z1 Z2

Including various accessories Auction-ID: A1-49818-1516

Hydraulic press manufactured in 1995. This EXNER EX SBR 200 features a pressing force of 2000 kN and a drive power of 78 kW. With an oil capacity of 1400 liters and a weight of 52000 kg, this machine is designed for robust performance. If you are looking to get high-quality pressing capabilities, consider the EXNER EX SBR 200 hydraulic press we have for sale. Contact us for further details.

Electric Hammelmann HDP 127 high-pressure system on trailer – 1,000 bar / 48 l/min – 110 kW For sale is a high-performance electric Hammelmann high-pressure system of the type HDP 127. The system is mounted on a braked trailer and equipped with a soundproof hood. Technical data: Manufacturer: Hammelmann Pump type: HDP 127 Year of manufacture of high-pressure pump: 2012 Trailer year: 2012 Operating hours: 3,693 h Maximum working pressure: 1,000 bar Flow rate: 48 l/min Built-in electric motor: 110 kW Power supply: 400 V / 50 Hz Engine speed: 1,500 rpm Pump speed: 440 rpm Plunger diameter: 30 mm Maximum water temperature: 40 °C Permissible total weight: 3,500 kg Tyres: 195/70 R15 103 K Ball Coupling Braked trailer Soundproofing enclosure The system is suitable for demanding industrial cleaning work, surface treatment and other professional high-pressure a ...

PJ Hare AM300 Pie Press Serial: 9B91140 2009, Twin pie press, 100mm diameter presses, on tabletop mobile frame, 1Ph

Key data: 75 t

Specifications: Capacity 75 tons Stroke rate 90 strokes Projection 300 mm Plunger stroke 16 - 140 mm Plunger adjustment 80 mm Table size approx. 800 x 600 mm Installation height max. approx. 400 mm

Technical data: Condition: New device Working pressure: adjustable from 170 to 350 bar Flow rate: 17–21 l/min Pump: Ceramic Triplex Plunger Pump Pump speed: max. 1,450 rpm Hydraulic power: 14 kW / 19 hp Engine: Honda 2-cylinder 4-stroke petrol engine Engine power: 16.4 kW / 22 hp Motor speed: max. 3,150 rpm Electric starter with engine oil pressure monitoring Fuel consumption: approx. 5.5 l/h Tank capacity: approx. 20 litres Water connection: GEKA High pressure connection: M22 × 1.5 Maximum water temperature: 40 °C Required water inlet pressure: 1.8–6 bar Dimensions: 79 × 79 × 99 cm Weight: 130 kg Chassis: Two-wheeler trolley with pneumatic tyres Item number: 1487050 Standard equipment includes a 10 m high-pressure hose, a high-pressure gun with an approx. 800 mm long spray lance, nozzle holder, 15° flat spray nozzle, pressure gauge, infinitely adjustab ...

MAX CAPASITY 80 T

Capacity 250 kg/h Throughput 2.3 m3 Briquette mould 8 square Antireb 11 kw Weight 1200 mg

Grafoteam PST 48 Printing Plate Transport Trolley; Condition New; for panel format 811x1200mm; mobile. Plate trolley Grafoteam PST 48; condition new; for plate size 811x1200mm; mobile.

This 6-axis TRUMPF TruBend 3066 B26 press brake was manufactured in 2018. It features a press force of 660 kN, a bending length of 2600 mm, and a stroke of 200 mm. The machine includes a 4-axis backgauge (X/R/Z1/Z2) and operates with a rapid approach speed of 200 mm/s. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 3066 B26 machine we have for sale. Contact us for more information.

Rated force: 6000kN, rated force travel: 1.7mm, rated energy: 10.2kJ, stroke: 100mm, stroke rate: 45/min, installation height: 360mm, tool holder adjustment: 50mm, clear width of press frame: 580mm, table width: 550mm, table depth: 620mm, tool holder width: 550mm, tool holder depth: 430mm, motor power: 15kW, length: 2435mm, width: 1500mm, height: 2750mm, weight: 13.5t, an on-site inspection is possible.

Press force: 2800kN, heating platen size X/Y: 500mm/500mm, daylight between the heating platens: 200mm, max. hydraulic pressure: 300bar, heating power: 9.4kW, drive power: 7.5kW, control: Siemens S5 with OP17, weight: approx. 4500kg. Equipped with sliding table, vacuum pump, vacuum chamber and vacuum receiver tank. An on-site inspection is possible.