135,406 used machines on RESALE, but how to find them? Machine Search
Dual hydraulic pump for PAAL, 45kW Used 2-piece hydraulic pump for PAAL channel baling press. Can be used in systems with a 45 kW motor
Used Triple Hydraulic Pump QX51-125/53-063/52-063R91 for PAAL channel baler. Can be used in systems with a 45 kW or 55 kW motor. Manufacturer partnumber: QX51-125/53-063/52-063R91
Technical data for the grating: Manafacture: Gi-Ro Vreden Condition of the goods: new (unobstructed) Reason for return: Wrong order end customer The scope of delivery includes: 01x Press grate, new (unobstructed) Material color: hot-dip galvanized Total depth: 1,000 mm (support rod direction) Total width: 1,230 mm (crossbar direction) Support rod dimensions: 45/1.7 mm S355JR TS anti-slip: no QS anti-slip: no Edging: T-profile 45 mm Mesh size: 60 x 40 mm Weight: approx. 18.11 kg | Pcs. Internal designation: S Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
Dimensions: 2,200 x 1,100 mm heating plate size Gold anodized heating plates 400 mm table opening height 4 hydraulic cylinders 50 tons of pressing pressure Stroke limitation Automatic opening Electrical opening and closing of the press table
Folding sheet press Tränklein BP; good condition; cleaned and tested; Working width 820mm. Bundling press Tränklein BP; good condition; cleaned and checked; working width 820mm.
Technical data for the press: Manufacturer Strautmann Umwelttechnik GmbH Type BaleTainer Year of construction 2014 Operating hours 14,947 hours Number of bales pressed: 5,174 pieces Press force main press 60 t Area pressing capacity 156 t/m² Dimensions of the insertion shaft 2,815 x 1,085 x 2,250 mm (L x W x H) Bale dimensions 1,100 x 1,100 x 700 mm (W x D x H) Drive power 5.5 kW Total connected load 13 kW Fuse 32 A, connector CEE 32 A Bonding 4-fold vertical, fully automatic Bale weights up to 400 kg, depending on material Hydraulic oil tank volume 90 L PLC control Siemens S7-1200 Control panel Siemens Simatic Touch Panel Press dimensions assembled 6,415 x 2,056 x 2,758 mm (L x W x H) Machine weight press approx. 7.5 t Scope of delivery: BaleTainer press incl. tilting device and bale chute. A megaliner with an effective interior height of at least 2.9 m is requi ...
used baler Manufacturer: UNOTECH Type: UPAXX 70 Year of Make: 2020 Machine was only in operation for about 6 months and was removed from the plant in 2022. Technical data: Press force: 700 kN Specific pressing force: up to 450 N/cm² Channel cross-section (h x w): 350 x 500 mm Filling opening (l x w): 1,250 x 420 mm Main pump drive power: 45 kW Performance under operating conditions: - At 85 kg/m³ bulk density in 1-stroke operation approx. 2.5 t/h - At 85 kg/m³ bulk density in 2-stroke operation approx. 4.2 t/h Package density for tin cans: up to 1,200 kg/m³ Machine weight depending on equipment: 10.3 t Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Photos will be added at short notice.
Bank of 4x Bradley & Turton 120ton Upstroke Presses 20” / 500mm sq electrically heated platens Daylight adjustable 18” 2200psi 12” Ram diam. 12” stroke Return rams Solid state relay Hydraulic valve for Press up / down Quantity available: 4 complete with 1x pump unit.
Continuous press Manufacturer: Wemhöner Model: VSF Year of construction: 1972 Panel dimensions: 3600 x 2200mm Heating medium: Oil Feeding Destacking Total length approx.: 12.000mm
Technical data for the grating: Manafacture: Gi-Ro Vreden Condition of the goods: new (unobstructed) Reason for return: Wrong order end customer The scope of delivery includes: 01x Press grate, new (unobstructed) Material color: hot-dip galvanized Ctow7lyof8 Total depth: 1,000 mm (support rod direction) Total width: 980 mm (crossbar direction) Support rod diameter: 35/1.7 mm S355JR TS anti-slip: no QS anti-slip: no Edging: T-profile 35 mm Mesh size: 90 x 50 mm Weight: approx. 9.35 kg | Pcs. Internal designation: R
Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5500x1400x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L, built 2026 --------------------------------- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beam ...
On sale is a complete line for the production of longitudinal and transverse plates. 1. Weinig Dimter high frequency press. 2. Grecon Ultra4 longitudinal line. 3. Line for width connection Obel. 4. Hobelrotoles. 5. Timesavers 1350 mm grinding machine with three units. 6. Planer Schenko (with lifting platform for parcels) + conveyor belt + charger. 7. SLH cold width press. 8. Thermal tunnel for individual packaging of plates. 9. Glue applicator Inles. 10. Glue applicator for slats. 11. Obles line for longitudinal connection of slats.
In the pipeline HSM baler, type HL 7009 ST Re, year of manufacture 2017 Technical data: Manufacturer: HSM Type: HL 7009 ST Re Year of Make: 2017 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (WxHxL) Bale weight: up to 600 kg Binding: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (LxWxH) Weight: 7500 kg Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.
ERIKA RECORD dough dividing and warp knitting machine Automat Type 4 - used, refurbished in 2023 - Type 4, 30 pieces, working range 40 - 120 g removable plastic dough enclosing ring Piston with non-stick coating Swivel machine head for easy cleaning Dividing knife electrolyt-plated four active times and active time switch-off (parts/presses only) no oil in the working area of the machine Machine with heavy casting stand for vibration-free operation Long-lasting, low-wear drive complete with three plastic knitted plates
ERIKA RECORD dough dividing and warp knitting machine semi-automatic type 4 - exhibition machine, brand-new condition, year of manufacture: 2025 - Type 4, 30 pieces, working range 40 - 120 g removable plastic dough embracing ring dough piston with non-stick coating tiltable machine head for easy cleaning dividing knife electrolyt-plated no oil in the working area of the machine machine with heavy casting stand for vibration-free operation complete with three plastic moulding plates
Pressure vessel, pressure tank, pressure vessel, -Pressure tank: Stainless steel compressed air tank -Contents: approx. 1.5 liters -Item No.: 4541 ABD10 190 -Number: 19 containers available -Price: per piece -Dimensions: 385/150/H105 mm -Weight: 4.2 kg/pc.
Embossing press - embossing machine Hydraulic Pressing surface, 600 x 2700mm Heated pressing surface
This press from Collin at Plastima Used Machinery in machine storage. The machine is from 2001 and is in good condition. – Brand: Collin Pilot & Lab Solutions – Model: P200P – Construction year: 2001 – Plate Size: 200 x 200 Mm – Max. pressing force: 196 kN
Pressing force: 2250kN, max. working length: 4100mm, approach speed: approx. 150mm/s, max. working speed: 10mm/s, max. ram stroke: approx. 215mm, max. throat depth: approx. 380mm, distance between uprights: approx. 3600mm, table width: 100mm, working height: approx. 1080mm. Machine dimensions: approx. 5100mm/2000mm/3000mm, machine weight: approx. 15.5t. An on-site inspection is possible.
Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement.
Embossing pressure: 8000kg, embossing area X/Y: approx. 220mm/310mm, speed: 33rpm, table adjustment: 90mm. Equipment: 2 foil feeds, thermostat, automatic operation with timer for loading time, central lubrication, hand guard, continuously adjustable embossing time, several mounting plates. An on-site inspection is possible.
Piferoen type 5H baler complete with conveyor. Baling press 6.30m x 2m x 1.6m approx. Conveyor 7.5m x 1.2m x 0.80m approx.. Chamber size (WxDxH) 108 x 59 x 105 cm approx. Suitable for baling textiles and other products. Bales can be completely covered for protection of material.
Ex pressure vessel with agitator, MDG 45, 100 hours, V4424140313 Walther, mint condition Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € 5.020 excl. Mwst. If you have a VAT number, we will gladly issue you an invoice without VAT. Top Condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Top cleaned and ready for immediate use. Technical data: - Ex Stainless steel pressure vessel MDG45, 42.8 liters, 4 bar, Walther-Pilot. - Ex electric agitator with gear motor, SK0Z/2G-63S/4 2G TF RD, Nord - Ex pressure regulator, V3540000000, Walther-Pilot - Pneumatic controller, ITV2030 34F2N3, SMC - Incl. industrial plug and cable - optional with Defende ...
SPECIFICATIONS: Cold press Working table mm: 2500 x 1300 No. 4 pistons Vertical stroke: 450 mm
Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100
Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T
2000 Ton Sumitomo Hot Forging Press line Year 2006 Stroke 350 mm (13.78") Strokes per min 75 Shut height 850 mm (33.47") SlideAdj. 7 mm (.27") Ram size 1200 mm LR X 1300 mm FB Bed size 1320 mm LR X 1300 mm FB 4 stage transfer system Slide knockout Bottom knockout Scrap System Dual Die Changer Extra Die Shoes Billet Heater and Billet Saw Also Available This line was used by HONDA to make transmission gears, It takes a billet, cuts it to size, heats it to 1300 C then the press hits it 4 times. It can determine good from bad parts, the bad parts get sent to a quench tank, the good parts get sent into a cool down conveyor that you can pick the parts up by hand at the end. The entire system was ran by one operator.
Key data: 400 t, 800 mm
Oil-hydraulic double-column press 400 T with sliding table Press type: Double column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. 4000 kN Free tear-off force max. 400 kN Print build-up time Closed tool steel on steel Max. 4 sec. Dimensions: 3,800 mm long and 4,475 mm wide Max. opening width 800mm Stroke 800mm Table height above floor 1100mm Height above ground (height) approx. 4300 mm Hall height min. 5500 mm Parallel deviation at 20°C +/- 0.1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of the press without consumables and table top approx. 28 tons Press table Table size 1500x1500 mm Velocities Quick closing at 100 mm sec. Pressing speed 8 – 3 mm sec. Acoustic pressure Sound pressure level, measured at a height of 1.5m on the control pane ...
Press brake manufactured in 2018. This IBETAMAC 3200 100T features a pressing force of 100 t and a bending length of 3,200 mm. It includes controlled axes for X and Y, along with safety equipment such as additional side safety lasers. The machine is practically unused, fully functional, and available for testing. If you are looking to get high-quality bending capabilities, consider the IBETAMAC 3200 100T machine we have for sale. Contact us for further details.
Press brake manufactured in 1997. This IMAL E3A 100/33 features a press force of 100 tonnes and a bending length of 3,300 mm. With a motor power of 11 kW and a machine weight of 9,700 kg, it is designed for robust performance. If you are looking to get high-quality bending capabilities, consider the IMAL E3A 100/33 machine we have for sale. Contact us for further details.
Press brake manufactured in 2001. This IMAL SMALL 835/25 features a press force of 25 tonnes and a bending length of 835 mm. It is equipped with Delem DM51 CNC control for enhanced precision. If you are looking to get high-quality bending capabilities, consider the IMAL SMALL 835/25 machine we have for sale. Contact us for further details.
used canning press / packaging press Manufacturer: WAGNER Type: WDSP 7000 Year of construction: 1993 specifications: Pressing force: 70 t Specific pressing pressure: 318 kg/cm² Drive power: 15 kW / 400 V Duct format: 550 x 400 mm Filling opening L x W: 1,150 x 550 mm Compaction chamber: 700 x 550 x 400 mm Total stroke: 2,100 mm Machine length: approx. 5,500 mm Machine width: approx. 1,920 mm Capacity: approx. 1.5 t/h (depending on material) Package size, WxHxL: 550 x 400 x 280 - 550 mm Package weight: approx. 20 - 40 kg (depending on the setting of the package length) Machine weight: approx. 3,500 kg
Inv. Num. : 6992 Type: LKT 250 Producer: METALPRESS Created: 1963 Parameters: Ram stroke: 120 mm Plunger adjustment: 100 mm Machine weight: 2700 kg
Specifications Maximum pressure: 54 tons Power supply: 400V / 7.5 kW Press force: 5.62 kg/cm² Year of construction: 2005 Bale size: 1200x800x1200 mm Productivity: approx. 2 bales/hr Bale weight: approx. 500 kg Price: on request Machine is fully functional, after technical supervision. Price also includes paint renovation.
Press brake manufactured in 2019. This Vimercati PHSY 30X1250 features a pressing force of 30 tons and a bending length of 1,250 mm. It includes an X-axis travel of 400 mm and an R-axis travel of 130 mm. If you are looking to get high-quality bending capabilities, consider the Vimercati PHSY 30X1250 machine we have for sale. Contact us for further details.
Specifications Maximum pressure: 12 tons Power supply: 380V/ 5.5 kW Press force: 2.5 kg/cm² Year of construction: 1985-1993 Bale size: 800x600x(600-1000)mm Productivity: approx. 3 bales/hr Bale weight: approx. 100 - 200 kg Price: on request Machine is fully functional, after technical supervision.
Filter area: approx. 8m², number of filter leaves: 9, vessel capacity: 720l, allowable operating overpressure: 6bar, allowable operating temperature: 80°C, vessel diameter: approx. 760mm, inlet: DN50, outlet: DN50, vent: DN25, solids discharge: DN350. Pumps and piping are available. Filter empty weight: approx. 750kg, space requirement X/Y/Z: approx. 2000mm/1790mm/2800mm. Inspection possible by arrangement.
CNC Press Brake manufactured in 2024. This DAMAMT WC67K 63T/2500 CNC features a pressing force of 63 tons and a bending length of 2,500 mm. It includes advanced CNC control with 4+1 axes and motorized V-axis crowning for precision bending. If you are looking to get high-quality bending capabilities, consider the DAMAMT WC67K 63T/2500 CNC Press Brake we have for sale. Contact us for further details.
Baler HSM, type HL 7009 ST/A, year of construction 2021 Technical data: Manufacturer: HSM Type: HL 7009 ST/A Year of Make: 2021 Hours: 1118 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (WxHxL) Bale weight: up to 600 kg Binding: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (LxWxH) Weight: 7500 kg Materials: paper, cardboard, foil Note: The press is in good condition and has been inspected and tested by us. You can find a video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance paymen ...
Weingarten Eccentric Press AV10 - With pliers feed - Reel and reel - When pressing, the speed can be set up with a frequency converter - Press force: 10 t - Stroke rate: 160 / min - Plunger stroke: 6-60 mm - Plunger adjustment: 40 mm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
echnical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg
Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer
Inv. číslo: 4465 Type: PL-140 LC Výrobce: OMC Vyrobeno: 2014 Parametry: Příkon: 75 kW
USED OMAG TRONIC Concrete block press, Year of construction: 1999 Complete production line with production plates (1400 x 1050 x 50 mm), approx. 3800 pieces in continuous operation. Control system renewed by OMAG about 5 years ago. New vibration system from Omag installed. Drying chamber with 15 chambers, 15 levels. Multi-purpose forklift with automatically adjustable forks for the upper level. Machine in continuous operation until the end of September 2026. Visits possible by appointment. USED OMAG TRONIC Concrete block press, year of manufacture: 1999 Complete production line with production plates (1400 x 1050 x 50 mm), approx. 3800 units in continuous operation. Control system renewed by OMAG approx. 5 years ago. New vibration system from OMAG installed. Drying chamber with 15 compartments, 15 levels. Multi-purpose forklift with automatically adjustable forks for th ...
Offer 20202 Specifications: - max. pressing force 35 t - Projection to the middle of the ram 240 mm - Working height adjustable with hand crank 540 to 940 mm - 2 Hand control - Protective shield enclosure with light barrier - Material - Slide-in device - Pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - Drive 400 V / 15.5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg
Press brake manufactured in 2003. This ATLANTIC HPES-40-135 features a capacity of 135 T and operates at a voltage of 380 V, 50 Hz. It includes a Robosoft ATS 550 control system and has a total weight of 2650 KG. If you are looking to get high-quality bending capabilities, consider the ATLANTIC HPES-40-135 machine we have for sale. Contact us for further details.
Two eccentric presses are offered. 1) ETH 3 eccentric press, pressing capacity: 30000kg, cutting area for material with 45kg strength: 665mm², ball screw adjustment: 40mm. Including protective cover and separate control cabinet. 2) An eccentric press with C-frame design, design: C-frame with flywheel, die clamping: hydraulic clamping device on the table. Including safety enclosure. An on-site inspection is possible.
Capacity: 250 ton V ? Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 64 - 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg
maximum number of results exceeded
please refine your search
