mec wood used for sale

GAMMA MECCANICA GM 125 COMPAC - TOTALLY RECONDITIONED, Extrusion line with pre-compactor, Nominal throughput rate 700-800 kg/h depending on the type of material and feeding rate, Average energy consumption : 0.25-0,30 kwh/kg, The line includes:, Loading belt, tunnel metal detector, compactor with dosing unit, extruder with 125 mm screw diameter, 35 L/D, nitrided screw and barrel in very good conditions., The line was working with LDPE film and PPL non woven., Previous owner never pushed the extruder over 600 kg/h, semi-automatic, non-stop hydraulic screenchanger, oleo-dynamic pack, water ring pelletizer, drying centrifuge, recycling water tank, electric cabinet for the complete management of the line, The line is offered reconditioned, See Constructors [description](.gamma-meccanica.it/en/plastic-recycling/plastic-recycli ng-compac/) for a new line like this one, availability: immediate, ...

Krones Model : Mecafill Type: VK2V 066-103/KK Year of Make: 1999

Pneumatic press, pneumatic punch, multifunctional punch, punch, universal punch, punching machine, pneumatic hole punch -Manufacturer: All Mecanic, multifunctional punch -Type: 994.500-1 - Execution: pneumatically operated, with foot control -Punching tool: see photos -Dimensions: 400/270 / H370 mm -Weight: 28 kg

This 3s MECOF CS 88 G Bed Type Milling Machine was manufactured in 1990. It features a working table length of 6,000 mm and a maximum permissible load of 8 tons per meter. The spindle motor power is 14.7 kW, with a speed range of 10 – 1,207 rpm. If you are looking to get high-quality milling capabilities, consider the MECOF CS 88 G machine we have for sale. Contact us for further details.

Oil hand pump, oil cabinet, oil dispenser, oil pump, oil dispensing system, oil delivery device, oil station, oil centrifuge -Handover: in its current condition as inspected -Level indicator: missing, condition as shown in photos -Manufacturer: Tecalemit, mobile oil dispensing device with hand pump -Item No.: 1.520201.1 -Tank capacity: approx. 30 liters -Pump: hand-operated -Hose: can be shut off with tap -Dimensions: 500/440/H820 mm -Weight: 17 kg

Code: 0311 Brand: CIT MECCANICA Model: V 25 / KS Fully automatic and very precise sharpening and setting machine for band saw blades (normal and spaced teeth) and for sharpening for circular saw blades Technical features Minimum pitch of saw teeth 2 mm Maximum pitch of saw teeth 20 mm Maximum width of bandsaw blades 50 mm Minimum diameter of circular blades 110 mm Maximum diameter of circular blades 600 mm Grinding motor 0,12 Kw Main motor 0,20/0,25 Kw Teeth sharpened per min 35 and 70 Diameter of emery wheels 175 mm Speed of grinding wheel 3000 rpm Gear-box oil SAE 30 1,5 Kg Overall dimensions mm 900 x 650 x 1400 h Weight 115 kg

Railcar, platform wagon, heavy-duty transport wagon, transport wagon, heavy-duty wagon, electric heavy-duty rail wagon, rail wagon, trailer -Manufacturer: Mechanic Maschinenbau Hahn, electric heavy-duty railcar with lifting cylinder -Type: Railcar MTA, load capacity 20000 kg -Roller spacing: 2150 mm -Cylinder spacing: 2245 mm -Lift height: 110 mm -Drive units: 2x Demag geared motors type ZBF80A 4 B020 gearbox type ADE40TD -Individual components: see photos -Overall dimensions: 2860/2440/H610 mm -Empty weight: 2200 kg

Motor protection relay, relay, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor, motor protection, monitoring relay, thermistor -Manufacturer: Schiele, motor protection relay MSS mecotron 1 C/O unused original packaging -Item no.: 2.430.801.11 -Voltage: 220- 240V AC -Number: 2x relay available -Price per piece -Dimensions packaging: 100/80/H25 mm -Weight: 0.2 kg

Motor protection relay, relay, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor, motor protection, monitoring relay, thermistor -Manufacturer: Schiele, motor protection relay MSS mecotron 2 C/O unused in original packaging -Article number: 2.430.810.93 -Voltage: max. 250 V / A1/A2: AC/DC 24V -Quantity: 17x relays available -Price per piece -Dimensions packaging: 80/25/H100 mm -Weight: 0.1 kg/pc.

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Mecman, pneumatic cylinder, type unfortunately not recognizable -Stroke: 25 mm -Piston: Ø mm -Piston rod: Ø 25 mm -Max. pressure: 10 bar -Number: 2x cylinders available -Price: per piece -Dimensions: 240/45/H45 mm -Weight: 0.6 kg

HORIZONTAL STEAM COOKER, MECALSA, TYPE: MC V-1600 Technical description: Load capacity (Tuna type ± 2 Kg): 2 Tons Diámeter (inside): Ø 1.600 mm Cooker lenght: 4.550 mm Heating: FRESH/STEAM system Cooking: Direct steam Programs: Washing, cooking, humidifying and cooling - AUTOMATIC Temperature control: cooking environment and fish bone

Mecalux roller conveyorRoller conveyor 1800-540-450 RA1902 Make: Mecalux Roller width (RB): 450 mm, Steel rolls Nominal/outer width (NB): 540 mm length: 1800 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 2x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Electric data: 24V ITOH-Deki Construction year: 2017 condition: very good (used) Conveying length in mm: 1800 Nominal / outside width in mm: 540 Roll width in mm: 450 Roll division in mm: 75 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-m ...

Mecalux roller conveyor roller conveyor 1800-740-650 RA1917 Make: Mecalux Roller width (RB): 650 mm, Steel rolls Nominal/outer width (NB): 740 mm length: 1800 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 2x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 Electric data: 24V ITOH-Deki condition: very good (used) Conveying length in mm: 1800 Nominal / outside width in mm: 740 Roll width in mm: 650 Roll division in mm: 75 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e ...

This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of approximately 7200 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine is equipped with a powerful 5.5 kW electrospindle and a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the MECAL MC 305 machine we have for sale. Contact us for further details.

This 7-axis MECOS SYNCRO 135/3000 was manufactured in 2008. It features a pressing force of 135 tons and a bending length of 3000 mm, making it suitable for various bending applications. The machine is equipped with CNC control for enhanced precision and efficiency. If you are looking to get high-quality bending capabilities, consider the MECOS SYNCRO 135/3000 press brake we have for sale. Contact us for further details.

This 3-axis PELCO MECCANICA CLOUD was manufactured in 2015. It features a working area of 2000 × 1000 mm and a Z-axis travel of 250 mm. The machine is equipped with a 12-position tool changer and an electrospindle speed ranging from 2000 to 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the PELCO MECCANICA CLOUD CNC router we have for sale. Contact us for further details.

For vacuum and gas flush, Including tool trolley, Dye: (5x) 148 x 233 mm, Compressed air: 6 - 8 Bar, Power: 3 x 400V, 50Hz, 20kW, Dimensions: 5800 x 900 x 2400 mm, Weight: 3000 kg

CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used - : Price ex location: 23.500.-€ (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMONSTRATION MACHINE Three-axis milling machine in flatbed gantry design. Working paths X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame wag Bortal: Design as a solid, stress-free, completely welded slahl construction, powder-coated. Heavy table base to accommodate the VAC-CAISSON vacuum table, designed as a cassette, air passage holes in a grid of 10 mm. Feed speed: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, sliding shoes with upstream ball circulation. Transmission : Precision Ball Screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeatability: +/- 0.025 mm Mechanic ...

milling machine, year 1998, CNC 4040R. Used machine in good condition. More info & price on IndustrialBuyer.

Mech Masz LP01 Dough feeding hopper 2022, Stainless, Feeding hopper, chunker for continuous dough feed system, 160Kg stainless hopper, variable speed, auto or manual with foot pedal, 3Ph

A modified MECO internal keyway slotting machine is available. Keyway width range: 4mm-45mm, max. square keyway diameter: 36mm, max. hexagonal keyway diameter: 36mm. The machine was modified and can now slot square and hexagonal keyways. Documentation available. An on-site inspection is possible.

B50 - Mech. Bending machine -Technical data see data sheet

working width: 400 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 Bürsteinheiten centrally adjustable and each with a single fine adjustment; 1. brush: methal brush, diameter 220mm; 2. brush: thynex brush granulation 80, diameter 220mm; height adjustment: handwheel; readout workpiece thickness: mechanical counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 3 kW; motor power feed: 0,37 kW; machine length: machine width: weight: In this machine, the brushes are pivotable diagonally to the feed direction, As a result, the edges are broken similar to oscillating brushes.

Year: 2009 - technically efficient, ready to work – after full service - disc diameter: 400 mm - bottom cutting - cooling and lubrication system - vertical pneumatic clamps - protective cover - compressed air preparation station

cutting diameter: 420 mm saw band length: 5744 x 1,3 x 41 mm cutting width: 420 mm cutting speed: 15 - 110 m/min : 7,5 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,9 x 2,4 x 2,1 m Hydraulic band saw machine with - Material feed 1000mm - Motorized saw blade tension - Emergency stop device - Replacement saw bands The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

mecc old AC generator ECN 40-LB/4 AC synchronous generator from 1998, 90 hours of operation. 400 V/50 Hz, 680 KVA Manufacturer: mecc alte Model No.: ECN 40-LB/4 Type: AC Synchronous Generator Serial Number: 750555 Power [KVA]: 680 Voltage [V]: 230/400 Frequency [Hz]: 50 Current [A]: 1,700 / 981 Speed [1/min]: 1,500 Year of Make: 1998 Weight [kg]: 1.410 Dimensions LxWxH [m]: 1.30 x 0.80 x 1.10

working width: 600 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 brushing units seperatly adjustable; 1. brush: methal brush, diameter 220mm; 2. brush: tynex brush granulation 80, diameter 220mm; height adjustment: handwheel; read out workpiece thickness: mechankal counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 4 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 1200mm; weight: 650kg;

working width: 300 mm; maximum workpiece thickness: 210 mm; min. Workpiece length: 300 mm; aggregate: 2 Bürsteinheiten central adjustable; 1. brush: tynexbrush granulation 60, diameter 180mm; 2. brush: tynexbrush granulation 80, diameter 180mm; height adjustment: handwheel; read out workpiece thickness: mechanical counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 3 kW; motor power feed: 0,37 kW; machine length: 1150mm; machine width: 800mm; weight: 390;

Working width: 600 mm; Working height: 150 mm; Units: 4 brush units separately adjustable; 1st unit, rotor group: group of 5 rotor brushes oscillating, Ã ̃ 115 each one motor 3 kW; 2nd unit, rotor group: group of 5 rotor brushes oscillating, Ã ̃ 115 each one motor 3 kW; 3. Unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive; 4. Unit, brush: Scotch Brite Hard / diameter 220mm, vario-drive; Height adjustment: electric; Altitude display: digital; Control: Touch screen; Feed speed: 4 - 12 m/min; Motor power feed: 0.37 kW;

Working width: 380 mm; Working height: 150 mm; 1st unit, rotor group: group of 5 rotor brushes oscillating, Ã ̃ 115 each one motor 3 kW; 2nd unit, brush: Scotch Brite Hard / diameter 210mm, vario drive; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power feed: 0.37 kW; Vacuum carpet: yes; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;

working width: 400 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 brushing units separately adjustable; 1. brush: metal brush 220mm; 2. brush: tynex brush, granulation 80, diameter 220mm; height adjustment: handwheel; height adjustment: mechanical counter; feed speed: 4 - 12 m/min; motor power brush: 2 x 3 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 900mm; weight: 500kg;

Working width: 600 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 4 ; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Metal, diameter 220mm; 3. Brush: Tynex grit 60, diameter 220mm; 4. Brush: Tynex grit 120, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 4 kW; Motor power feed: 0.37 kW; Machine length: 2800mm; Machine width: 1500mm; Machine height: 1600mm;

Working width: 600 mm; Working height: 5mm to 300mm; minimum workpiece length: 250 mm; Aggregates: 2; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Tynex, diameter 210mm; Height adjustment: electric; Altitude display: digital; Feed speed: 4 - 14 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 4 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1500mm; Machine height: 1600mm; Weight: 700kg;

Working width: 400 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 2; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Tynex brush, 80 grit, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 3 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1400mm; Weight: 550kg;

Working width: 600 mm; Working height: 300 mm; minimum workpiece length: 250 mm; Units: 2 brush units centrally electrically adjustable and with fine adjustment for the offset; 1. Brush: Metal brush diameter 210mm; 2. Brush : Tynex brush, grit 80, diameter 210mm; Height adjustment: electric; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 4 kW; Motor power feed: 0.37 kW; Machine length: Machine width: Weight:

Working width: 400 mm; Working height: 300 mm; minimum workpiece length: 250 mm; Units: 2 brush units centrally electrically adjustable and with fine adjustment for the offset; 1. Brush: Metal brush diameter 210mm; 2. Brush : Tynex brush, grit 80, diameter 210mm; Height adjustment: electric; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 3 kW; Motor power feed: 0.37 kW; Machine length: Machine width: Weight:

Working width: 400 mm; Working height: 300 mm; minimum workpiece length: 250 mm; Aggregates: 2 brush units separately adjustable; 1. Brush: Scotch Brite Medium / Diameter 220mm, Vario drive; 2. Brush : Scotch Brite Hard / Diameter 220mm, Vario drive; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 3 kW / both with Vario drive (infinitely adjustable); Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;

Working width: 400 mm; Working height: 300 mm; minimum workpiece length: 250 mm; Aggregates: 2 brush units separately adjustable ; Brush removal height: 25 mm with pneumatic damping; 1. Brush: Metal brush diameter 220mm; 2. Brush: Tynex brush, 80 grit, diameter 220mm; Right - Counterclockwise: for both brushes; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 3 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;

working width: 800 mm; working height: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 Units seperatly adjustable; 1. brush: Metalbrush diameter 220mm; 2. brush: Tynexbrush, grit 80, diameter 220mm; height adjustment: manual; read out workpiece thickness: mechanical counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 5,5 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 1500mm; waight: 950kg;

Max working width: 1300mm Max working thickness: 140mm Max. machining width: 1300mm Motorized feed rollers 2 brushing units

Used Used Meccanoplastica Pet blower: Year: 2024 Condition: As Is Model: MIPET 2P Year: 2024 Speed: 1,200 BPH Type: linear Number of cavities: 1 Moulds included (for 250 cc and 500 cc bottles) Preform elevator and orienter Bottle formats produced: - Bottle volume from 0.25 L to 2.5 L - Bottle diameter: 120 mm - Bottle height: 350 mm Machine dimensions/overall size: length 2,900 mm, width 1,600 mm, height (including preform loader): 2,064 mm Safety protection Code: W 119 More details: https://bottlingscout.com

milling machine, year 2002, 70831 operating hours, CNC iTNC 530. Used machine in good condition. More info & price on IndustrialBuyer.

- 2 matching pieces availebel - Cast iron not fabricated with welded construction - Made in ITALIA grey cast iron very ridged

Power generator, emergency power generator, generator, power generator, power generator, emergency power generator, power generating unit -Manufacturer: Deutz / mecc old, generator set with base -Engine: Deutz type F3L 2011 compact, oil/air-cooled 3-cylinder diesel engine -Generator: mecc alte type ECP28 L4 Technical data: see photos, nameplates -Individual components: see photos -Note: without controls -Dimensions: 1300/640/H850 mm Total weight: 452 kg

AUTOMATIC BOOK SEWING MECCANOTECNICA ASTER HEADOP 150 -Book sewing machine serial n. 20135/13535 Year 1989 -Max. signature size 320x420 mms -Min. signature size 80x150 mms -Mech. speed 150 cycles / Min -Openings 4-4 -Table delivery, cabin control system -Manuals, tools and all accessories -Available immediately, in very good conditions

Boxmaker for corrugated cardboard Mecanelec boxmaker with autofeeder Max working width 1400mm Creasing, cutting, slotting die cutting, punching Automatic feeder Additional AUX. tools for cutting and creasing section Very good condition

• New operating system, comptuer (Mecanelec originaal 5th generation) • New electrical motors, • New clutches/brake • New bearings • Touchabple HMI /operaator panel • Lot of slotting blades, circular knives, tools, etc.

DMC 3-belt calibrating sander mod. USK1350 M3 - CE standard - 1 steel roller - 2 rubber rollers - 3 rubber rollers - N. 3 independent motors - Working width 1350mm - With shoes (short pieces device) - Blower on the third group - On/off device on each group - Touch screen control - Matr. SA/005006 - Year 2004 - CE compliant

900 mm sanding machine for turned products. GENINI mod. LAR90 - Maximum working length 900 mm. - Automatic loader