128,657 used machines on RESALE, but how to find them? Machine Search
1 x Francis Shaw model K2A MK4 Intermix Machine number 11242.8, Year June 1994, NR2 rotors, Working batch volume 27 - 36 litres Drop door with linear actuator, SSA dust seals, Pneumatic hopper, Hansen semi unidrive gearbox, Rating 150kw, 1475/32rpm, With ASEA 152kW, 1510rpm DC variable speed motor and controls.
1 x Farrel model F80 banbury internal mixer, Serial number: 996006, Year of manufacture: 1999 (new), Chamber volume 80litre, With 4 wing ST rotors, pneumatic hopper, hydraulic drop door dicharge with Linear actuator and spade latch, FYH hydraulic dust stops, Unidrive gearbox, With 600 HP DC variable speed motor and drive/SCR controller, Complete with hydraulic unit, Lubrication system, 3 Zone TCU and Farrel series 2000 operator panel. High spec mixer (fully hard chrome plated chamber and rotors). Previously used for PVC.
Intended for mixing meat mixtures and spices in order to obtain a homogeneous mixture. All stainless machines. The mixer can also be used to mix a smaller amount than the maximum capacity. The mixture is easily unloaded - by tilting the cauldron forward. Reverse system, mixing in both directions. Clarification: the price of the machine is for a floor model. Machine legs – long or short – are available as an option Power Mn 1100 W Tf 1472W Electrical connection 230-400V/50Hz Dimensions of the vessel mm 410×480 Capacity kg./ l. 50/88 A 750 mm B 465 mm C 1250 mm D 595 mm E 1120 mm F 150 mm G ...
1 x Farrel Pomini model F160 Banbury internal mixer, Original year of manufacture: 1980, but rebuilt in 2000 (very good condition), Chamber volume: 160L Net batch size: 120kg, With 2 wing type rotors, Rotor tips hard material coated and fully chrome plated Rotor speed max 50rpm, pneumatic hopper, hydraulic drop door, FYH dust seals, Unidrive gearbox, With 435kw DC variable speed motor and electrical controls (415V). Complete and in good condition.
Intended for mixing meat mixtures and spices in order to obtain a homogeneous mixture. All stainless machines. The mixer can also be used to mix a smaller amount than the maximum capacity. The mixture is easily unloaded - by tilting the cauldron forward. Reverse system, mixing in both directions. Clarification: the price of the machine is for a floor model. Machine legs – long or short – are available as an option Power 1100 W mono 1472 W trif El. power supply 230-400V/50Hz Dimensions of the vessel mm 300×390 Capacity kg/l 30/42 A 680 mm. B 365 mm. C 1120 mm. D 530 mm E 975 mm F 150 mm G 650 mm L 440 mm M 940 mm N 610 mm O 1010 mm Weight: kg 49 Package sizes: mm 720x570x770 Weight: kg 59
Machine made of stainless steel. Silent operation process. The spiral auger is already of proven quality for mixing minced meat - over 250 companies work with our mixing machines. The mixing body is designed with the idea of homogeneous and precise mixing of minced meat with spices for the production of minced meat, kebabs, meatballs, for mixing ingredients for salads, etc. Unloading the mixture and cleaning the machine is quick and easy. Only parts from world brands are used to make the machine. The built-in motor - reducer is imported from Germany and is of the highest class A limit switch is mounted on the safety cover . The built-in electric part has moisture-proof buttons. . The hopper can be locked in different positions and can be tilted easily for unloading the mixture. Reverse system - mixing in both directions. Model ...
Machine made of stainless steel. Silent operation process. The spiral auger is already of proven quality for mixing minced meat - over 250 companies work with our mixing machines. The mixing body is designed with the idea of homogeneous and precise mixing of minced meat with spices for the production of minced meat, kebabs, meatballs, for mixing ingredients for salads, etc. Unloading the mixture and cleaning the machine is quick and easy. Only parts from world brands are used to make the machine. The built-in motor - reducer is imported from Germany and is of the highest class . A limit switch is mounted on the safety cover . The built-in electric part has moisture-proof buttons. The hopper can be locked in different positions and can be tilted easily for unloading the mixture. Reverse system - mixing in both directions. Dimensions ...
Lot 592 500L steam jacketed hemispherical scrape surface vessel, bottom central discharge, half moon lid, agitator (six sets of removable propellers along shaft)
Mixer 250 liters double shaft with paddles - brand new! The machine has 2 motor-reducers reverse ×1.1 kw or a total power of 2.2 kw. Main characteristics: Designed for homogeneous mixing of food products; Made entirely of stainless steel; Completely silent mixing process; Two working augers with paddles; 2 new front unloading flaps; Easy cleaning of the machine; Built-in two silent motor-reducers of the highest class; Safety cover with limit switch; Built-in electric part with moisture-proof buttons; Reversible mixing system in both directions; Capacity: 250 l.; Installation power 2.2KW, 400V, 50Hz;
Main characteristics: - Intended for homogeneous mixing of food products; – Made entirely of stainless steel; – Completely silent mixing process; – Two working augers with paddles; – Easy emptying of the mixture by means of a valve in the lower part; – Easy cleaning of the machine; – Built-in two silent motor-reducers of the highest class; – Safety cover with limit switch; – Built-in electric part with moisture-proof buttons; – Reversible mixing system in both directions; – Ability to mount a lifting device (option); Model MMC 400 Capacity in l. 400 Maximum capacity in kg. 300 RPM 30 Gear ratio of the reducer 50 Dimensions in mm. 1689 / 945 / 1360 Operating voltage 3 x ...
Tangential Chamber volume 70 l, hydraulic drop door AC motor 320 kW / 380V / 50 Hz, 1483 RPM Year 1987 Previously used for PVC.
Hobart M802 planetary Rührmaschine Machine is running video about test run orderly and quiet, available 4 speeds Automatic boilers raising and lowering Quitschen in the boiler increasing, may replace a belt or bearing Normal signs of wear at the foot of the machine Kneading hooks, beaters and Stainles belong to the machine Machine must be thoroughly cleaned prior to use
Stock # U2397-2 Used stainless steel horizontal twin ribbon mixer by Laska (AT) model ME3000. Machine has internal dimensions of mixing chamber W 1505 mm x L 2005 mm x D 1170 mm. Total volume of mixing chamber 3000 l. Working volume in range from 2100 l up to 2400 l, and weight of batch up to 2400 kg. Mixer has twin shafts with welded ribbons. Each shaft is driven by el. motor 11/7.5 kW, 2880/1450 rpm, 380 V, 50 hz, via reducer and chain. Working rotation of each shaft 36/71 rpm. Mixer has top open. Discharge through two front wall outlets, equipped with two lids designed in teflon and operated via hydraulical actuators. Mixer has hydraulical device driven by el. motor 1.5 kW, builded inside supporting pedestal. Mixer is mounted on four tension cells. Machine has connection pipe for feeding liquid inside the mixing chamber during the work. Mixer is equipped with stainless steel lifti ...
3 liter laboratory mixer -Container V2A -Container to remove -Drive 1 motor frequency controlled
Machine name: Paddle dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: Stainless steel Drive motor: 5.5 KW Version: EExdellCT4 Total capacity: 235 liters Wetted parts: stainless steel 1.4571 Gearbox:Helical gear motor Equipment: Double jacket, mechanical seal, wave heating Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: yes available Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maierkopf HWR 225 Condition: Used very good Price: on request
1 piece NAUTA mixer MBX 28-R -Volume ca. 2.300 litres - bulk density CA. 0, 9 kg / l -Gearbox reconditioned vintage cameras -Swing-arm reconditioned vintage cameras -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.37 of kW Virgin
1 piece NAUTA mixer MBX 40-R -Volume approx. 3.200 litre - bulk density CA. 0, 7 kg / l -Gearbox reconditioned vintage cameras -Swing arm mild steel Virgin -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.55 of kW Virgin
1 piece NAUTA mixer MBX 50-R -Volume approx. 4.000 litre - bulk density CA. 0, 6 kg / l -Gearbox reconditioned vintage cameras -Swing arm mild steel Virgin -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.55 of kW Virgin
Machine name: Vertical Heating Cooling Mixer Manufacturer: Lödige Type: TSHK160 / KGU400 Year of construction: 2005 Speed: 104 / 300-1500 rpm Operating hours: Very few operating hours Material: Stainless steel Drive motor: 11 / 45 kW Design: ATEX version / explosion-proof Total capacity: Heating mixer: 210 liters / Cooling mixer: 391 liters Wetted parts: 1.4541 Gearbox: bevel gear motor / motor frequency-controlled Dimensions: L 4605 x W 4225 x H 3550 mm Tech. Documentation: Yes Note: Technikum Betrieb. Wood chips / melanin resin additives Accessories: Stage with stairs, temperature control unit 30 kW, platform scale, control panel, control cabinet, dust filter
Planetary mixer Varimixer AR10 The AR series of beaters is the oldest by design and also the most durable series of beaters. The AR series is characterised by the fact that it has a mechanical belt transmission with simultaneous infinitely variable speed control. The well-known robustness and powerful motor have been retained, and a number of characteristic features of the AR models have been improved without compromising the widely recognised quality. Technical data: Capacity: 10 litres, Adjustable speed: 53-294 rpm, Stainless steel mixing bowl, Stainless steel butterfly, Electrical power: 400 V - 0,37 kW. After general refurbishment. Call and arrange a demonstration of the machine!
Stock# U2403-1 Used stainless steel homogenizing mixer by Brogtec (CH) model MH-8. Mixer has total volume of mixing chamber 10 l and working volume about 8 l. Tank is rising and lowering manually. Has bottom discharge outlet and possibility to discharge by manual tilt. Working pressure range - mixing chamber from vacuum till 29 PSI (2 bar). Heating jacket up to 43 PSI (3 bar). Working temperature range - mixing chamber from 32 - 250 F (-1 to 120 C). Heating jacket - from 89 - 250 F (31 - 120 C). Mixer is equipped with anchor with wall scrappers type agitator, vertical ribbon agitator and hi-speed homogenizing mill. Anchor and ribbon agitators are driven by gearbox and el motor 0.3/0.44 kW, 1660/3260 rpm, 460 V, 60 hz. Working rotation of vertical ribbon agitator is about 124 rpm, working rotation of anchor agitator - up to 62 rpm. Hi-speed homogenizing mill is belt driven by el motor ...
Stock# U2415-1 Used stainless steel conical mixer by Hosokawa Milacron model DBXE-300R. Total volume 798 l, working volume 300 l. Mixer has top mounted stainless steel unsupported mixing screw, driven via gearbox and el. motor 2.2 kW. Rotating arm is designed in carbon steel and is driven via gearbox and el motor 0.18 kW. Bottom central discharge via outlet with diameter 200 mm and manually operated slide valve. Machine is mounted on three carbon steel legs and is equipped with local control panel. Last time machine had been working in food industry. Shipping dimensions: diameter 1400 mm x length 3200 mm x weight 800 kg.
Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz
Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz
Spiralkneter KEMPER, type: ECO 125 AE - for approx. 200 kg dough, 125 kg of flour - machine in the bakery - year of manufacture: 10/99 - State: goods - incl. 2 piece stainless steel boiler -El. Supply: 400 V, 50 Hz, 3Ph, 50 A Inspection and test run are possible by arrangement like.
Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz
The onus screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 4500L Operating temp. : 25-35 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :65 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 1kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz
Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank: 5L Power : 12,5kW Voltage : 380V Weight : 450kg
New machine 24 months warranty available from September 2023 - pre-orders possible! Advantages: + Double-arm mixer as a robust, ergonomic table model + higher hydration possible compared to the spiral mixer + Your doughs will last longer and stay fresh longer + depending on the type of dough, a TA of up to 200 is possible + excellent for pizza / bread doughs, as well as very sensitive doughs + mixes ingredients very gently into the dough + less dough heating than conventional spiral kneading machines + Stainless steel boiler and double-arm kneading tool + Kneading arms are dishwasher safe and can be removed quickly and without tools + transparent flour dust hood (soft-close) with automatic switch-off + simple, digital control + 10 kneading levels with timer and 5 speeds adjustable + very smooth-running motor, power transmission by belt drive Technical data (according ...
Drive: 300 KW Capacity: 90 ltr. Weight: 11500 kg Volume: 63 ltr. Blade speeds: 45.5 / 41.2 1/min. Engine speed: 1500 1 / min. specific stamp: 1-7 bar, adjustable Cylinder high-pressure: 420 mm Air consumption: 140 m³/h (at 3bar; 15-20 ° C) Type of current: Main drive 380 V / 50 Hz Secondary drives 380 /220 V / 50 Hz Voltage 220 V / 50 Hz Weight of the transmission: approx. 2950 kg. -> Hydraulic push-in device.
This ploughshare / inclined bucket mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Machine name: Ploughshare / Inclined bucket mixer Manafacture: MAP Type: WBHP 15000 Year of construction: 2013 Hours: Zero Material: Mild steel S235J Drive motor: Here you can choose between 160 kW, 200 kW and 250 kW Designation: Single-shaft horizontal mixer Design: Batch mixer Usable volume: 4,500 - 10,500 litres Equipment tools: Plowshares (screwed) Dimensions: L 6124 mm x W 2800 mm x H 2525 mm Empty weight: weight 8000 kg Tech. Documentation: Yes Note: Since the tools are screwed, it can be used both as a ploughshare mixer and as an inclined bucket mixer. This horizontal mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Condition: New and workshop overhauled Price: On request
- Gas mixing valve MWM 12301147 - Suitable for several motors - Please note! Price per piece! - 12301147 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating ...
- Mixing pipe mixture line MWM 12301281 - References: 12300476 ; 12300650 - Suitable for several motors - Please note! Price per piece! - 12301281 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proje ...
Machine name: Dissolver Manufacturer: Schneider Maschinenbau Gmbh Type: SHDC15 KWFU Ex Year of construction: 2010 Speed: 150 - 1500 rpm Material: Stainless steel Engine drive: 22.55 kW Design: Explosion protection: II 2 / 3 D c T120°C Total capacity: approx. 900 liters 900 liter container Parts in contact with the product: Stainless steel Equipment: Hydraulically extendable Dimensions: Machine height approx.: 3100 mm, (upper part extended) Length, with container, approx.: 2200 mm, width with collet approx.: 1800 mm, pliers open Weight, without container, approx.: 1600kg Foundation load approx.: 6000 kg/m3 Empty weight: 1600 kg Tech. Documentation: Yes in PDF Accessories: Stainless steel mixing tank, Dissol glare: diameter 450 mm, Frequency converter Condition: Used Price: On request
Planetary Stirring Machine Model: Planeto 80 L Professional machine with robust technology! for best results! LED display 10 power levels and timer Intrusion protection / safety grille with protection circuit Stirring machine with tools: 1 whisk, 1 dough hook, 1 flat beater 1 80 litre stainless steel kettle Electric boiler stroke DGUV V3 tested Connection 400V, 4.5 kW, 16A-CEE plug Dimensions: 720 x1050 x 1660 mm, WxDxH New machine with 24 months warranty + service package Optional: 1 tank car Maintenance contract TOP quality and price in one machine! Your partner with extra service! Many more TOP planetary mixers in stock!
Twin-shaft continuous mixer 2 shafts with paddle 800 mm Size: L= 4m x W= 1.3m H= 1.2m Content: Approx. 6 cbm Drive: El. angular gearbox Stable base frame With control station. Location: Saxony-Anhalt I offer as an intermediary on behalf of the owner. The information is non-binding, prior sale is reserved. The offer prices are net. If you don't like the price, please let me know your ideas. I am committed to realizing a price that meets your expectations. I am happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp) w.goldmannt-online
Bulk material system for mixing loose flours, powder, ganulate, spices and weighing into smaller batches Manufacturer Daxner GmbH Year of construction 2008 / plant in top condition / in stainless steel The system consists of the following components: 2x Nozzle Filter DFK-14/25/150 2x separation container Dm 1990 mm with vibration floor drain to rotary valve 2x rotary valve type Westinghouse AL 300 3C 2x eddy current screening machine type WM20 with magnetic box for metal separation and 2 sets of screen baskets 4x Horizontal Counterflow Mixer HGM-2000 2x Mixer inlet with folding box 2x Tube screw conveyor RSHN-250 2 x Tubular Auger RSHN-300 2 x Stafsjö Gate Valve (knife gate valve) 4x Transport Dosing Screw, Company Schenck Process GmbH, Type GRMD 42.089.089.0380.44.421.1119 If you want more information, please send us an email to: infobarsso and we will send you all ...
Planetary Stirring Machine Sinmag Model: SM 200 sophisticated technology ... already proven many times over! Easy manual operation Mixer with 3 gears 1 stainless steel kettle 20 litres 1 flat beater 1 dough hook 1 broom Boiler Protective Grille / Encroachment Protection Floor-standing tabletop machine with boiler stroke DGUV V3 tested Dimensions WxDxH in mm: 420 x 530 x 800/1116 Weight: 110 kg Connection 220V, 900 Watt NEW Machine 24 Months Warranty + Spare Parts Service TOP quality and price in one machine! Your partner with extra service! Option: Other Kettles & Brooms 10 litres Maintenance contract Underframe You can find many more great bakery machines in our large exhibition!
Used Ruehle tumbler. Model MKR 600. Last service in 2021. RUEHLE MKR600 The RUEHLE drum tumbler-mixer combines many technical functionalities in the field of plasticizing technology. It is used, among others, in: - massaging - mixing - pickling - dry salting The RUEHLE tumbler model MRK600 is equipped with a highly efficient cooling unit and a very high-performance vacuum pump. In the computer software, we can determine the degree of product cooling. The band available to the user ranges from -15 ° C to + 15 ° C. The mass input determines the vacuum level, which can be changed at any time. The possibilities of plastic processing are just one of the advantages of the machine. It has also been equipped with a mixing function - thanks to which the raw material processing time is shortened to 10 minutes. Despite the typical massaging or mixing functions, the device ...
NFM L200IV 200L universal mixer Model L200IV Cutter / Mixer / Homogenizer is following the footsteps of our experience in the industrial food processing equipment for producers of consumer products worldwide. Integrating our patents and knowledge; we created a machine with industrial capacity and durability with the ease of use of a counter-top appliance. The L200IV allows our customers to increase process capacity without increasing labour needs. Only one person is enough to operate this machine regardless of body-power. The tilting of the bowl and opening-closing of the cover is fully motorized and works automatically. The machine is operated via a hybrid control panel, offering water-proof metal buttons and a control screen. The timer, the variable speed function, the optional reverse revolving function, the cover and tilting mechanism controls are all integrated into this panel. The ...
REITZ RW40300400 agitator for tank containers 4.0 KW / 300 rpm and inclined blade stirrer Worm gear motor IE3: Three-phase motor Moll 3 x 230/400 Volt, 4.0kW, IP55, n1 = 1440 rpm, n2 = 300 rpm, worm gear, i = 1:5, plug-in shaft as output shaft D = 28 mm. 5 m cable and motor protection plug. Shaft: Precision stainless steel shaft D30, length 2000 mm, diameter 30 mm, Material: stainless steel. With 2 x 1000 mm pitch and additional rigid coupling. Coupling: 2 pieces rigid coupling, 1x 28/30, 1x 30/30 mm, material stainless steel Agitator: 2 pieces of double-bladed oblique blade stirrers, diameter 400 mm, material stainless steel 1.4571, welded version. Truss: With 1 piece mounting frame approx. 400 mm x 2600 mm Each longitudinal strut 2600 mm consists of 2 mounting rails 41 x 82 mm profile. With diagonal struts and angles for fixation on tank frames. Frequenc ...
Stock #U2450-1 Used foaming mixer by Kinematica AG (CH) type MEGATRON FM 19-120/2 LR-P. Machine has working output in range from 40-200 l/h, depending on product. Maximal viscosity of product up to 10000 mPas. Foaming head is equipped with heating/cooling jacket and can work at pressure up to 23 bar and temperature up to 90C. Rotor works with adjustable rotation - in range from 375 up to 750 rpm. Main drive power consumption - 11 kW. Contact parts with product designed in stainless steel AISI 316L. Mixer is equipped with integrated lobe pump by Tri-Clover/Tri-Clamp, driven by el. motor with power 0.75 kW. Working pressure up to 23 bar. Maximal rotation of lobes - up to 370 rpm. Gase feeding system - dosing air/N2 - at pressure up to 25 bar, temperature up 20C, flow range - 0.5 to 15 ln/min. Machine is mounted on mobile stainless steel frame with local control panel. Last time used in fo ...
Stock# U2453 Used stainless steel contact parts ribbon mixer by Yanagiya (JP). Mixing chamber has internal dimensions: L 598 mm x W 500 mm x D 550 mm. Total volume of mixing chamber 145 l. Working volume approx 100 l. Side walls have welded atmospheric stainless steel jacket, which has bottom discharge outlet with valve. Mixer has mixing shaft with bolted stainless steel ribbon, belt driven by el motor 1.5 kW, 1420 rpm, 380 V, 50 Hz. Discharge of chamber by tilt, via manually operated wheel. Mixer is mounted on mobile carbon steel base and is equipped with local control panel. Shipping dimensions: L 145 cm x W 95 cm x H 160 cm x weight about 800 kg.
Grieser VPL 3,0 L laboratory vacuum planetary mixer suitable for mixing powdery solids, liquids and pastes as well as for the incorporation of fillers, jacketed for heating/cooling, total volume mixing container 3.0 liters, useful volume mixing container 0.3 to 2.1 liters, operating pressure mixing container -1/+1.3 bar, operating pressure jacket max. 3 bar, flow temperature 100ºC, mixing container can be raised and lowered, speed mixing tool 18-393 RPM, speed planet/scrapper 13-176 RPM, material of product contacting parts 1.4404, material dynamic seals PTFE, material static seals EPDM/Silikon, electrics 400V AC/50Hz, total power 3 kW, Siemens SIMATIC S7-1500, machine weight (without container) approx. 300 kg, includes Single Temperiertechnik type CH-6-6-W heating/cooling system (temperature of the circulating medium (water) 0-90ºC, max. operating pressure 17 bar, test pressure 21 bar ...
Machine Type: Core Sand Mixer Manufacturer: Baumberg Type: AMF60 Year of Make: 2010 Condition: used / in working order Offer will only be sent if a complete imprint is provided Price 1.750 Euro incl. 19% VAT Fixed Price Location Warstein , Germany Reference M-BAU-0425 DESCRIPTION We offer you a used core sand mixer from the manufacturer Baumberg. Weight 480kg Flow rate 1.44 m3/h Timer would have to be renewed. But it also works that way. Available now. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!
55,000 litre milk tank/ agitator tank made of V2A Cat No.: 25-0151EUBA Condition: Used Volume 55000 L Material V2A (AISI 304) 1.4301 Overall height 8400 mm Cylinder height 6000 mm Diameter 3400 mm Number of feet 3 Surface marbled on the outside Surface inside 2B=IIIC ground Agitator Erwin Stelzer Warburg Agitator Technology Topsoil: Clapper bottom Level measurement with sleeve 3/4" Side stick agitator mixer with 2 propeller stages Dome with manhole Ø DN 300 Tank cylinder: Manhole Subsoil: Clapper bottom Sensor for level measurement 3 half-shell feet with base plate Fixed Technical data stick mixer: Manufacturer: Erwin Stelzer Warburg Rührwerktechnik Engine type: DRK 7.127 6.0 kW 8.0 hp 390/660 volts 18.2/10.5 Amp. 0.68cosφ 450 r.p.m. 50 Per. Operating Mode: S1 Agitator shaft: 6,870 Propeller: 2 x 500
maximum number of results exceeded
please refine your search
